"Pradchar Pradyawong","The Effect of Dynamic Solution Condition on the Failure of FRP Exposed to HCl",,,,,,,2016,Sept.
"Pradchar Pradyawong","The Effect of Dynamic Solution Condition on the Failure of FRP Exposed to HCl",,,,,,,2016,Sept.
"Pradchar Pradyawong","The Effect of Dynamic Solution Condition on the Failure of FRP Exposed to HCl",,,,,,,2016,Sept.
"Pradchar Pradyawong","The Effect of Dynamic Solution Condition on the Failure of FRP Exposed to HCl",,,,,,,2016,Sept.
"PRADCHAR Pradyawong,Saiko AOKI,Masatoshi KUBOUCHI,Tetsuya SAKAI","The Effect of Cyclic Temperature of Sulfuric Acid on Flexural Property of Matrix Resin for FRP Storage",,"Journal of Chemical Engineering of Japan","The Materials Science Society of Japan","Vol. 48","No. 8","pp. 670-677",2015,Aug.
"Pradchar PRADYAWONG,Masatoshi KUBOUCHI","The study of HCl penetration behavior inside of an unsaturated polyester resin under temperature gradient to simulate the accidental roof failure of FRP outdoor storage tank containing high concentration HCl solution","The 20th International Conference on Composite Materials (ICCM-20)","Proc. The 20th International Conference on Composite Materials (ICCM-20)",,,,,2015,July
"Pradchar PRADYAWONG,Masatoshi KUBOUCHI,Saiko AOKI,Tetsuya SAKAI","The Effect of Cycling Temperature of Sulfuric Acid on Flexural Property of Matrix Resin for FRP Storage","The 5th World Conference of Safety of Oil and Gas Industry, WCOGI 2014","Proc. of the 5th World Conference of Safety of Oil and Gas Industry, WCOGI 2014",,,,,2014,June
"Pradchar PRADYAWONG,Masatoshi KUBOUCHI,Saiko AOKI,Tetsuya SAKAI","The Effect of Cycling Temperatureof Corrosive Process Fluid on Flexural Property of Matrix Resin","NACE Corrosion 2014","Proc. of NACE Corrosion 2014",,,,"pp. 1-13",2014,Mar.
"Pradchar PRADYAWONG,Tetsuya SAKAI,Saiko AOKI,Masatoshi KUBOUCHI","The Effect of Cycling Water Temperature on Flexural Property of Unsaturated Polyester Resin Under Liquid and Vapor Phase","The 19th International Conference on Composite Materials, ICCM-19","Proc. of the 19th International Conference on Composite Materials, ICCM-19",,,,"pp. 1644-1652",2013,July