"Naoya Kanno,Naoki Takata,Takashi Matsuo,Masao Takeyama","Precipitation morphology and stability of Ni3Nb phase in Fe-20Cr-30Ni-2Nb austenitic heat ?resistant steels under creep at 973 K","12th International Conference on Creep and Frecture of Engineering Materials","Creep 2012/JIMIS 11 Final Circular and Abstract Booklet",,,,"p. 56",2012,May
"I. Tarigan,K. Kurata,N. Takata,T. Matsuo,M. Takeyama","Novel Concept of Creep Strengthening Mechanism using Grain Boundary Fe2Nb Laves Phase in Austenitic Heat Resistant Steel","2010 MRS Fall Meeting","Materials Research Society Symp. Proc.","Materials Research Society","Vol. 1295",,"pp. 317-322",2011,Feb.
"Y. Hasebe,K. Hashimoto,T. Matsuo,M. Takeyama","Assessment of the Phase Equilibria among γ-Fe/ Fe2Nb/ Ni3Nb Phases in Fe-Ni-Nb Ternary System at Elevated Temperatures","2010 MRS Fall Meeting","Materials Research Society  Symp. Proc.",,"Vol. 1295",,"pp. 171-176",2011,Feb.
"長谷部優作,橋本 清,松尾 孝,竹山雅夫","Fe-Ni-Nb 3元系の実験及び計算状態図","日本学術振興会耐熱金属材料第123委員会研究会","日本学術振興会耐熱金属材料第123委員会研究報告","日本学術振興会","Vol. 51","No. 2","pp. 165-178",2010,July
"吉村信幸,松尾 孝","P添加によるM23C6の均一析出を適用したオーステナイト系耐熱鋼の高強度化",,"熱処理 / 材料と表面の改質","(社)日本熱処理技術協会","Vol. 50","No. 2","pp. 87-88",2010,Apr.
"環野直也,芳村和寛,高田尚記,松尾 孝,竹山雅夫","Fe-20Cr-30Ni-2Nbにおけるγ-Fe/γ"-Ni3Nb相間のミスフィット転位の解析","材料とプロセス第158回秋季講演大会","材料とプロセス(CD-ROM)","(社)日本鉄鋼協会","Vol. 23","No. 1","p. 34",2010,Mar.
"松尾 孝","γ単相単結晶の低応力でのクリープによる新たなクリープ概念","材料とプロセス第159回春季講演大会","材料とプロセス","(社)日本鉄鋼協会",,,,2010,Mar.
"I. Tarigan,K.Kurata,N.Takata,T.Matsuo,M.Takeyama","Effect of Grain Boundary Laves Phase on the Creep Strength of Fe-20Cr-30Ni-2Nb Austenitic Steel at 973 K","材料とプロセス第158回秋季講演大会","材料とプロセス(CD-ROM)","(社)日本鉄鋼協会","Vol. 23","No. 1","p. 43",2010,Mar.
"森光亮人,吉村信幸,竹山雅夫,松尾 孝","Pを添加した17Cr-14NI系鋼のM23C6の粒内均一析出におよぼす温度と時間の影響","材料とプロセス第158回秋季講演大会","CAMP-ISJI材料とプロセス(CD-ROM)","(社)日本鉄鋼協会","Vol. 23","No. 1","p. 50",2010,Mar.
"肥後賢司,竹山雅夫,松尾 孝","フルラメラ組織としたTiAl合金のクリープ変形に伴う応力軸の変化","材料とプロセス第158回秋季講演大会","CAMP-ISJI材料とプロセス(CD-ROM)","(社)日本鉄鋼協会","Vol. 23","No. 1","p. 54",2010,Mar.
"倉田桂一,高田尚記,松尾孝,竹山雅夫","Fe2Nb Laves 相の粒界析出によるオーステナイト系耐熱鋼の高強度化","高温材料のフィジカル・メタラジー研究会","高温材料のフィジカルメタラジー研究会，講演集","日本鉄鋼協会",,,"pp. 47-50",2010,Mar.
"高田尚記,松尾 孝,竹山雅夫","Fe2Nb Laves相の構造とそのオーステナイト系耐熱鋼の強化相としての役割","耐熱金属材料第123委員会11月期討論会","(独)日本学術振興会 耐熱金属材料第123委員会研究報告","(独)日本学術振興会","Vol. 50","No. 3","pp. 389-400",2009,Nov.
"石川茂浩,高田尚記,松尾孝,竹山雅夫","遷移金属Laves相の構造と相安定性","耐熱金属材料第123委員会11月期討論会","(独)日本学術振興会 耐熱金属材料第123委員会研究報告","(独)日本学術振興会","Vol. 50","No. 3","pp. 347-360",2009,Nov.
"Shigehiro Ishikawa,masakazu yamashita,Naoki Takata,Takashi Matsuo,Masao Takeyama","Solubility and Site Occupation of Transition Metal M in Fe2Nb Laves Phase at Elevated Temperatures","The 17th IFHTSE Congress","J. The Japan Society for Heat Treatment (Netsu Shori)","The Japan Society for Heat Treatment","Vol. 49",,"pp. 486-489",2009,Oct.
"Satoshi Miyake,Masao Takeyama,Takashi Matsuo","Dynamic Recrystallization During Creep at Higher Temperature Under Lower Stress in Ti-47.5at%Al with Fully Transformed Lamellar Structure","The 17th IFHTSE Congress","J. The Japan Society for Heat Treatment (Netsu Shori)","The Japan Society for Heat Treatment","Vol. 49",,"pp. 675-678",2009,Oct.
"Shigehiro Ishikawa,Masao Takeyama,Takashi Matsuo","Solubility and Site Occupation of Transition Metal M in Fe2Nb Laves Phase at Elevated Temperatures","The 17th IFHTSE Congress","J. The Japan Society for Heat Treatment (Netsu Shori)","The Japan Society for Heat Treatment","Vol. 49",,"pp. 671-674",2009,Oct.
"生沼駿,倉茂将史,松尾孝,竹山雅夫","Ti-Al-Nb ３元系の相平衡及び組織形成に及ぼす炭素の効果","耐熱金属材料第123委員会","（独）日本学術振興会 耐熱金属材料第123委員会","（独）日本学術振興会","Vol. 50","No. 2","pp. 255-266",2009,July
"五味伸幸,石川茂浩,松尾孝,竹山雅夫","Fe-Ni-Nb-Zr４元系におけるγ-Fe/Laves相間の相平衡","日本金属学会講演大会","日本金属学会講演概要",,,,,2009,July
"石川茂浩,杉浦友章,松尾孝,竹山雅夫","Fe2Nb Laves相の格子定数変化に及ぼす置換型固溶元素Mの効果","日本金属学会講演大会","日本金属学会講演概要",,,,,2009,July
"Naoki Takata,Takashi Matsuo,Masao Takeyama","Transmission Electron Microscopy of Fe2Nb Laves Phase with C14 Structure in Fe-Nb-Ni Alloys",,"Mater. Res. Soc. Proc.","Materials Research Society, Warrendale, PA","Vol. 1128",,"pp. 475-480",2009,May
"Shigehiro Ishikawa,Naoki Takata,Takashi Matsuo,Masao Takeyama","Site Occupation and Defect Structure of Fe2Nb Laves Phase in Fe-Nb-M Ternary Systems at Elevated Temperatures",,"Mater. Res. Soc. Proc.","Materials Research Society, Warrendale, PA","Vol. 1128",,"pp. 463-468",2009,May
"菊川敏一,高田尚記,松尾孝,竹山雅夫","TiAlフルラメラ単結晶のSEM内曲げ試験によるき裂伝播のその場観察","第67回 日本熱処理技術協会講演大会","第67回 日本熱処理技術協会講演大会 講演概要集","日本熱処理技術協会","Vol. 67",,"pp. 15-16",2009,May
"長谷部優作,石川茂浩,松尾孝,竹山雅夫","Fe-Nb-Ni ３元系の1373Kにおける等温断面図の決定","第67回 日本熱処理技術協会講演大会","第67回 日本熱処理技術協会講演大会 講演概要集","（社）日本熱処理技術協会","Vol. 67",,"pp. 13-14",2009,May
"高田尚記,松尾孝,竹山雅夫","fccを母相とする高温材料の強度に及ぼす結晶粒界の役割","第３回「高温材料のフィジカル・メタラジー」研究会",,"日本鉄鋼協会 材料の組織と特性部会",,,,2009,May
"Masao Takeyama,Naoki Takata,Takashi Matsuo","Design Concept and Creep Properties of Advance Austenitic Heat Resistant Steels Strengthened by Intermetallics","2nd International ECCC Conference","Proc. of the 2nd International ECCC Conference",,,,"p. 7 (S-05)",2009,Apr.
"高田 尚記,石川 茂浩,松尾 孝,竹山 雅夫","Fe2Nb Laves相(C14)のNiの固溶に伴う欠陥構造の変化","2009年春期(第144回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 234(101)",2009,Mar.
"石川 茂浩,高田 尚記,松尾 孝,竹山 雅夫","Rietveld法によるFe2Nb Laves相(C14)の微細構造解析","2009年春期(第144回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 112(S2.31)",2009,Mar.
"Naoki Takata,Shigehiro Ishikawa,Takashi Matsuo,Masao Takeyama","Site Occupation and Structure of C14 Fe2Nb Laves Phase with Transition Metals M in Solution","Workshop on The Nature of Laves Phases XII","The Nature of Laves Phases XII","MAX PLANCK INSTITUTE CHEMICAL PHYSICS OF SOLIDS",,,,2009,Jan.
"Naoki Takata,Shigehiro Ishikawa,Takashi Matsuo,Masao Takeyama","Transmission Electron Microscopy of Defect Structure in Fe2Nb Laves Phase with Ni in Solution","Workshop on The Nature of Laves Phases XII","The Nature of Laves Phases XII","MAX PLANCK INSTITUTE CHEMICAL PHYSICS OF SOLIDS",,,,2009,Jan.
"Shigehiro Ishikawa,TAKASHI MATSUO,MASAO TAKEYAMA","Phase equilibria between gamma-Fe and Fe2(Mo,Nb) laves phase","Workshop on " The Nature of Laves Phase X"",,,,,,2009,Jan.
"Kazuhiro Yoshimura,Naoki Takata,Takashi Matsuo,Masao Takeyama","Precipitation Kinetics and Morphology of Fe2Nb Laves Phase in Prestrained Fe-20Cr-30Ni-2Nb Austenitic Heat Resistant Steel","MRS fall metting 2008","Abstracts of MRS fall metting 2008",,,,"pp. 496",2008,Dec.
"Keiichi Kurata,Naoya Hashizume,Naoki Takata,Takashi Matsuo,Masao Takeyama","Grain Boundary Precipitation Strengthening in Creep of Fe-20Cr-30Ni-2Nb Steel Strengthened by Intermetallic Phases","MRS fall metting 2008","Abstracts of MRS fall metting 2008",,,,"pp. 489",2008,Dec.
"Masafumi Kurashige,Shun Oinuma,Takashi Matsuo,Masao Takeyama","Influence of Carbon on Phase stability among b, a and g Phases and Microstructure Evolution in Ti-Al-Nb Alloys","MRS Fall Meeting 2008","MRS Fall Meeting Abstact Book","Materials Research Society",,,"p. 490",2008,Dec.
"Naoki Takata,Takashi Matsuo,Masao Takeyama","Transmission Electron Microscopy of Fe2Nb Laves Phase with C14 Structure in Fe-Nb-Ni Alloys","MRS fall metting 2008","Abstracts of MRS fall metting 2008",,,,"pp. 505",2008,Dec.
"Shigehiro Ishikawa,Naoki Takata,Takashi Matsuo,Masao Takeyama","Site Occupation and Defect Structure of Fe2Nb Laves Phase in Fe-Nb-M Ternary Systems at Elevated Temperatures","MRS fall metting 2008","Abstracts of MRS fall metting 2008",,,,"pp. 504",2008,Dec.
"倉田 桂一,高田 尚記,松尾 孝,竹山 雅夫","Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼のクリープ抵抗に及ぼす粒界Laves相Fe2Nbの効果","耐熱金属材料第123委員会 研究会","耐熱金属材料第123委員会研究報告","独立行政法人日本学術振興会","Vol. 49","No. 3","pp. 379-390",2008,Nov.
"Shigehiro Ishikawa,masakazu yamashita,TAKASHI MATSUO,Naoki Takata,MASAO TAKEYAMA","Solubility and Site Occupation of Transition Metal M in Fe2Nb Laves Phase at Elevated Temperatures","17th IFHTSE Congress 2008","Abstracts of 17th IFHTSE Congress 2008",,,,"pp. 115",2008,Oct.
"Manamu Nishimoto,Naoki Takata,Takashi Matsuo,Satoru Kobayashi,Masao Takeyama","Morphology and Characterization of Surface Diffusive Layer in Hot-dipped Aluminum Coated Iron","17th IFHTSE Congress 2008","Abstracts of 17th IFHTSE Congress 2008",,,,"pp. 218",2008,Oct.
"Kazuhiro Yoshimura,Naoki Takata,Takashi Matsuo,Masao Takeyama","Effect of Prestrain on Precipitation of Fe2Nb Laves Phase in Fe-20Cr-30Ni-2Nb Austenitic Heat Resistant Steel","17th IFHTSE Congress 2008","Abstracts of 17th IFHTSE Congress 2008",,,,"pp. 277",2008,Oct.
"石川茂浩,高田尚記,松尾 孝,竹山 雅夫","Fe2Nb Laves 相におけるM元素の置換site と格子定数の関係","日本金属学会 2008年秋期(第143回)大会","日本金属学会講演概要","社団法人日本金属学会","Vol. 143",,"p. 63",2008,Sept.
"西本真仏,高田尚記,松尾孝,竹山雅夫","鉄の溶融Al合金浴への浸漬による母相/拡散層界面の組織形態","第155回春季講演大会","材料とプロセス (CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. P36 (PS36)",2008,Sept.
"倉田桂一,橋詰直也,芳村和寛,高田尚記,松尾孝,竹山雅夫","炭素及びボロン添加Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼におけるFe2Nb Laves 相の析出","第155回春季講演大会","材料とプロセス (CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. P37 (PS37)",2008,Sept.
"三宅 悟司,竹山 雅夫,松尾 孝","フルラメラ組織としたTiAl合金の高温，低応力クリープにおける動的再結晶の形成","2008年秋期(第143回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 177(95)",2008,Sept.
"西本 真仏,小林 覚,高田 尚記,松尾 孝,竹山 雅夫","Feの溶融Al浸漬によるFe2Al5化合物相の形成と組織形態","2008年秋期(第143回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 82(S1.47)",2008,Sept.
"生沼駿,倉茂将史,松尾孝,竹山雅夫","Ti-Al-Nb ３元系のβ/α/γ ３相間の相平衡に及ぼす炭素の効果","第155回春季講演大会","材料とプロセス (CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. P35 (PS35)",2008,Sept.
"吉村信幸,竹山 雅夫,松尾 孝","P添加によるMo含有オーステナイト系鋼のクリープ破断強度の改善","第155回春季講演大会","材料とプロセス (CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. P29(PS29)",2008,Sept.
"杉浦友章,石川茂浩,橋本清,高田尚記,松尾孝,竹山雅夫","Fe-Ti-Ni ３元系のγ-Fe/Fe2Ti 相間の相平衡における実験と計算","日本金属学会 2008年秋期(第143回)大会","日本金属学会講演概要","社団法人日本金属学会","Vol. 143",,"p. 264",2008,Sept.
"生沼 駿,倉茂将史,松尾 孝,竹山 雅夫","TiAl基合金の相安定性に及ぼす炭素の効果","日本金属学会 2008年秋期(第143回)大会","日本金属学会講演概要","社団法人日本金属学会","Vol. 143",,"p. 77(S1.38)",2008,Sept.
"仲 幸佑,寺田 芳弘,松尾 孝","応力軸を[001]方位としたNi-20mass%Cr合金単結晶のクリープ変形の応力による違い","第156回秋季講演大会","材料とプロセス(CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. 1359",2008,Sept.
"原田 文雄,吉村 信幸,竹山 雅夫,松尾 孝","17Cr-14Ni-7W 鋼のP添加による高強度化","第156回秋季講演大会","材料とプロセス(CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. 1352(235)",2008,Sept.
"倉田 桂一,橋詰直也,芳村 和寛,高田 尚記,松尾 孝,竹山 雅夫","Fe-20Cr-30Ni-2Nb オーステナイト系耐熱鋼のクリープにおける粒界Laves 相Fe2Nb の役割","第156回秋季講演大会","材料とプロセス(CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. 1351(234)",2008,Sept.
"芳村和寛,橋詰直也,高田尚記,松尾孝,竹山雅夫","Fe-20Cr-30Ni-2Nb オーステナイト系耐熱鋼のクリープにおける粒界Laves 相 Fe2Nb の析出","第156回秋季講演大会","材料とプロセス(CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. 1350(233)",2008,Sept.
"高田 尚記,橋詰 直也,芳村 和寛,倉田 桂一,松尾 孝,竹山 雅夫","金属間化合物を強化相とするオーステナイト系耐熱鋼のクリープ特性","第156回秋季講演大会","材料とプロセス(CD-ROM)","社団法人日本鉄鋼協会","Vol. 21(2008)","No. 2","p. 1048",2008,Sept.
"芳村和寛,高田尚記,松尾孝,竹山雅夫","Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼におけるFe2Nb Laves相の析出に及ぼす予歪の効果","耐熱金属材料第１２３委員会","耐熱金属材料123委員会研究報告","独立行政法人に本学術振興会","Vol. 49","No. 2","pp. 163-174",2008,July
"橋詰直也,高田尚記,松尾孝,竹山雅夫","炭素無添加Fe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼のクリープ特性","耐熱金属材料第１２３委員会","耐熱金属材料123委員会研究報告",,"Vol. 49","No. 2","pp. 151-161",2008,July
"石川茂浩,山下正和,高田尚記,松尾孝,竹山雅夫","Fe-Nb-M 3元系におけるFe2Nb Laves相の相領域及びM元素の置換挙動","耐熱金属材料第１２３委員会","耐熱金属材料123委員会研究報告",,"Vol. 49","No. 2","pp. 203-214",2008,July
"松尾孝","鋼の用途と組織制御",,"製造中核人材育成講座テキスト(基礎講座用)金属熱処理スーパーマイスタープログラム「金属熱処理の基礎と実践」","東京工業大学 ものつくり教育研究支援センター",,,,2008,May
"Takaaki Tsurumi,Takashi Matsuo,Takuya Hoshina,Hirofumi Kakemoto","Size Effect and Dead Layer of BST Thin Films","2008 MRS Spring Meetings",,,,,,2008,Mar.
"高田尚記,松尾孝,竹山雅夫","透過型電子顕微鏡によるFe2Nb（C14）Laves相の微細構造解析","日本金属学会第142回春期講演大会","日本金属学会講演概要","日本金属学会",,,"pp. 92",2008,Mar.
"Takaaki Tsurumi,Takashi Matsuo,Takuya Hoshina,Hirofumi Kakemoto","Size Effect of Barium Titanate and MLCCs in the Next Generation","17th IEEE International Symposium on Applications of Ferroelectrics",,,,,,2008,Feb.
"Takaaki Tsurumi,Takashi Matsuo,Takuya Hoshina,Hirofumi Kakemoto","Size Effect and Dead Layer of BST Thin Films","17th IEEE International Symposium on Applications of Ferroelectrics",,,,,,2008,Feb.
"Masafumi Kurashige,TAKASHI MATSUO,MASAO TAKEYAMA","Effect of carbon on phase equilibria between α and γ phases in Ti-Al-Nb system","Ti 2007 -Science and Technology-","Ti 2007 -Science and Technology-","The Japan Institute of Metals, Japan","Vol. II",,"pp. 1321-1324",2007,Dec.
"TAKASHI MATSUO","New Creep Deformation Concept Based on Creep under Lower Stresses","Memorial Symposium for the 50th Anniversary of the 123 Committee, JSPS","Report of the 123rd Committee on Heat-Resisting Materials and Alloys,Japan Society for the Promotion of Science","日本学術振興会","Vol. 48","No. 3","p. 237",2007,Nov.
"T. Sugiura,S. Ishikawa,T. Matsuo,M. Takeyama","Phase Equilibria between γ-Fe (A1) and Fe2Ti Laves (C14) Phases and Microstructure in Fe-Ti-Ni Ternary System at Elevated Temperatures","PRICM 6","Materials Science Forum","Trans Tech Publications, Switzerland","Vol. 561-565",,"pp. 435-438",2007,Nov.
"岡本真吾,橋詰直也,松尾 孝,竹山雅夫","炭素無添加のFe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼におけるFe2Nb Laves相の析出に及ぼす結晶粒径の影響","第154回秋季講演大会","材料とプロセス","社団法人日本鉄鋼協会","Vol. 20","No. 6","p. 43",2007,Sept.
"杉浦友章,石川茂浩,松尾 孝,竹山雅夫","Fe-Ti-M3元系におけるγ-Fe(Al) / Fe2Ti(C14)相間の相平衡","2007年秋期(第141回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 365",2007,Sept.
"倉茂将史,松尾 孝,竹山雅夫","フルラメラ組織を有するγ-TiAl基合金における炭化物の析出挙動","2007年秋期(第141回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 65",2007,Sept.
"石川茂浩,山下正和,松尾 孝,竹山雅夫","Fe2Nb Laves相における固溶元素の置換siteのRietveld法による解析","2007年秋期(第141回)大会","日本金属学会講演概要","社団法人日本金属学会",,,"p. 64",2007,Sept.
"倉茂将史,松尾 孝,竹山雅夫","炭素を含むTi-Al-Nb3元系合金におけるα相の分解と炭化物の析出","第154回秋季講演大会","材料とプロセス","社団法人日本鉄鋼協会","Vol. 20","No. 6","p. 40",2007,Sept.
"芳村和寛,松尾 孝,竹山雅夫","炭素無添加のFe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼におるFe2Nb Laves相の析出に及ぼす冷間加工の影響","第154回秋季講演大会","材料とプロセス","社団法人日本鉄鋼協会","Vol. 20","No. 6","p. 25",2007,Sept.
"橋詰直也,松尾 孝,竹山雅夫","炭素無添加のFe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼の組織とクリープ特性","第154回秋季講演大会","材料とプロセス","社団法人日本鉄鋼協会","Vol. 20","No. 6","p. 1236",2007,Sept.
"芳村和寛,松尾 孝,竹山雅夫","冷間加工を施した炭素無添加のFe-20Cr-30Ni-2Nbオーステナイト系耐熱鋼におけるFe2Nb Laves相の析出","第154回秋季講演大会","材料とプロセス","社団法人日本鉄鋼協会","Vol. 20","No. 6","p. 1235",2007,Sept.
"三宅 悟司,竹山 雅夫,松尾 孝","フルラメラ組織としたTi-47.5at.%Al合金の高温・低応力クリープにおける動的再結晶の形成","日本鉄鋼協会第154回秋季講演大会","日本鉄鋼協会講演論文集 材料とプロセス","社団法人 日本鉄鋼協会","Vol. 20(2007)","No. 6","p. P32",2007,Sept.
"神立 奉文,竹山 雅夫,松尾 孝","ラメラ板と応力軸のなす角度Φが45°以上のTiAl PST結晶の遷移域におけるクリープ変形","日本金属学会2007年秋期(第141回)大会","日本金属学会講演概要","社団法人 日本金属学会",,,"pp. 60",2007,Sept.
"倉茂将史,松尾孝,竹山雅夫","Nbを含むTiAl基合金におけるα-Ti/γ-TiAl相間の相平衡及び組織形成に及ぼす炭素の効果","日本学術振興会 耐熱金属材料第123委員会","学振第123委員会研究報告","（独）日本学術振興会","Vol. 48","No. 2","pp. 151-160",2007,July
"松尾 孝","鋼の状態図と熱処理理論","平成19年度 熱処理大学","平成19年度 熱処理大学講義テキスト","社団法人 日本熱処理技術協会",,,"pp. 1-1~1-10",2007,July
"Shigehiro Ishikawa,TAKASHI MATSUO,MASAO TAKEYAMA","Phase Equilibria among α-Fe, γ-Fe, Fe2Mo Phases and Stability of the Laves Phase in Fe-Mo-Ni Ternary System at Elevated Temperatures","MRS fall meeting 2006","Materials Research Society Symposium Proceeding Advanced Intermetallic based Alloys","Material Research Society","Vol. 980",,"p. 517",2007,July
"杉浦友章,石川茂浩,松尾孝,竹山雅夫","Fe-Ti-Ni３元系における γ-Fe(A1)/Fe2Ti Laves (C14)相間の相平衡と相安定性","学振耐熱金属材料第123委員会","学振第123委員会研究報告","（独）日本学術振興会","Vol. 48","No. 2","pp. 83-92",2007,July
"神立奉文,櫻田 栄作,竹山雅夫,松尾孝","フルラメラ組織としたTiAl単結晶の遷移域におけるクリープ変形","日本熱処理技術協会講演大会","第64回日本熱処理技術協会講演大会講演概要集","（社）日本熱処理技術協会",,,"pp. 11-12",2007,May
"Y.Kondo,N.Miura,T.Matsuo","Stress Exponent of Minimum Creep Rate of Single Crystal Nickel-based Superalloy, CMSX-4, at 1273K","THRMEC'2006","Materials Science Forum/Trans Tech Publications",,"Vol. 539","No. 543","pp. 3100-3105",2007,Jan.
"N.Miura,K.Kurita,Y.Kondo,T.Matsuo","Change in Morphology of γ' of Prior-crept Single Crystal Nickel-beased Superalloy, CMSX-4, with Simple Aging","THERMEC'2006","Materials Science Forum/ Trans Tech Publications",,"Vol. 539","No. 543","pp. 3024-3029",2007,Jan.
"K.Yuge,Y.Terada,T.Matsuo","Change in Stress Axis with Creep Deformation in γ-Single Phase Ni-20mass%Cr Single Crystal within Standard Stereographic Triangle","THARMEC'2006","Advanced Materials Research/ Trans Tech Publications",,"Vol. 15","No. 17","pp. 864-869",2007,Jan.
"M.Mitsutake,Y.Terada,T.Matsuo","Change in Stress Axis with Creep Deformation in Ni-20mass%Cr Single Crystal with Orientation of [001]","THEMEC'2006","Advanced Materials Research/ Trans Tech Publications",,"Vol. 15","No. 17","pp. 870-875",2007,Jan.
"E.Sakurada,T.Matsuo","Change in Stress Axis with Creep Deformation in PST Crystal","THERMEC'2006","Advanced Materials Research/ Trans Tech Publications",,"Vol. 15","No. 17","pp. 858-863",2007,Jan.
"Takashi Matsuo","Role of Transient Creep in γ-Single Phase Ni-20mass%Cr Alloy","THERMEC'2006","Materials Science Forum/Trans Tech Publications",,"Vol. 539","No. 543","pp. 3030-3035",2007,Jan.
"石川茂浩,松尾孝,竹山雅夫","γ-Fe (オーステナイト) と平衡するFe2Mo Laves相の相安定性に及ぼすNi及びNb添加の効果","耐熱金属材料第123委員会研究報告","耐熱金属材料第123委員会研究報告",,"Vol. 47","No. 3","pp. 371-380",2006,Dec.
"松尾　孝,中島泰信","γ単相単結晶のクリープ変形によるγ単相多結晶のクリープ解析","耐熱金属材料第123委員会第17回討論会","日本学術振興会",,"Vol. 47","No. 3","pp. 261-269",2006,Nov.
"原田文雄,寺田芳弘,松尾　孝","SEM-EBSD法による2つのγ単相Ni-20mass%Cr合金双結晶のクリープ変形の解釈","日本鉄鋼協会第152回秋季講演大会","材料とプロセス/日本鉄鋼協会講演論文集",,"Vol. 19","No. 6","pp. 1233-1234",2006,Sept.
"神立奉文,竹山雅夫,松尾　孝","ラメラ板と応力軸のなす角度φが45°以上のTiAl PST結晶のクリープ変形に伴うφの変化","日本鉄鋼協会第152回秋季講演大会","材料とプロセス/日本鉄鋼協会",,"Vol. 19","No. 6","pp. 50",2006,Sept.
"Y.Kondo,N.Miura,T.Matsuo"," Dislocation Substructure in γ-channel of Single Crystal Nickel-Based Superralloy, CMSX-4, Crept at 1273K, 160MPa","8th Liege Con. Materials for Advanced Power Engineering 2006","Fouschungszentrum Julich/ Energietechnik Energy Technology",,"Vol. 53","No. 1","pp. 455-464",2006,Sept.
"N.Miura,F.Tanaka,K.Kurita,Y.Kondo,T.Matsuo","Dislocation Substructures at γ/γ' Interface of Single Crystal Nickel based Superalloy,CMSX-4, Crept at 1273K, 250MPa","8th Liege Con. Materials for Advanced Power Engineering 2006","Forschungszentrum Julich/ Energietechnik Energy Technology",,"Vol. 53","No. 1","pp. 465-474",2006,Sept.
"杉浦友章,石川茂浩,松尾孝,竹山雅夫","Fe-Ni-Ti３元系のFe-rich側におけるγ-Fe(A1)/Fe<sub>2</sub>Ti Laves (C14) 相間の相平衡","日本鉄鋼協会第152回秋季講演大会","日本鉄鋼協会, 材料とプロセス",,"Vol. 19","No. 6","pp. PS-37",2006,Sept.
"原田文雄,寺田芳弘・松尾　孝","γ単相Ni-20mass%Cr合金双結晶のクリープ","日本鉄鋼協会第152回秋季講演大会","材料とプロセス/日本鉄鋼協会",,"Vol. 19","No. 6","pp. 41",2006,Sept.
"櫻田栄作,竹山雅夫,松尾　孝","TiAlPST結晶の主すべり面によるクリープ変形","日本金属学会第139回大会","日本金属学会講演概要",,,,"pp. 84",2006,Sept.
"閔　小華,櫻田栄作,竹山雅夫,松尾　孝","ラメラ板と応力軸とのなす角度が30°近傍のPST結晶のクリープ変形","日本金属学会第139回大会","日本金属学会講演概要",,,,"pp. 85",2006,Sept.
"神立奉文,櫻田栄作,竹山雅夫,松尾　孝","ラメラ板と応力軸のなす角度φが45°以上のTiAl PST結晶のクリープ変形","日本金属学会第139回大会","日本金属学会講演概要",,,,"pp. 85",2006,Sept.
"松尾 孝","耐熱性?γ単相合金の高温変形?","第１回熱処理技術セミナー","日本熱処理技術協会,第１回熱処理セミナーテキスト","社団法人 日本熱処理技術協会",,,"pp. 4-1~4-10",2006,June
"杉浦友章,石川茂浩,松尾孝,竹山雅夫","Fe-Ni-Ti３元系のFe-rich側における γ-Fe (A1)/Fe2Ti Laves (C14) 相間の相平衡","日本鉄鋼協会講演大会","材料とプロセス",,,,,2006,Mar.
"杉浦友章,石川茂浩,松尾孝,竹山雅夫","Fe-Ti-Ni３元系におけるγ-Fe (A1)/Fe2Ti Laves (C14) 相間の相平衡と相安定性","耐熱金属材料第123委員会研究報告","耐熱金属材料第123委員会研究報告",,,,,2006,Mar.
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","γ-Feと平衡する(Fe, Ni)2(Nb, Mo) Laves相(C14)の相安定性","日本金属学会講演大会","日本金属学会講演概要",,,,,2006,Mar.
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Ni-Mo３元系の高温におけるγ-Fe/Fe2Mo (C14) Laves相の相安定性","日本金属学会講演大会","日本金属学会講演概要",,,,,2005,Sept.
" 松尾孝","高温,低応力条件下でのγ単相単結晶のクリープ",,"?日本鉄鋼協会 シンポジウム 耐熱材料の組織制御と長寿命化",,,,"pp. 9",2005,Sept.
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Mo-Ni３元系における α-Fe (A2), γ-Fe (A1)及び λ-Fe2Mo (C14)３相間の相平衡","日本鉄鋼協会講演大会","材料とプロセス",,,,,2005,Mar.
"石川茂浩,五味 伸幸,松尾孝,竹山雅夫","Fe-Mo-Ni３元系の1173Kにおけるα-Fe (A2), γ-Fe (A1), λ-Fe2Mo (C14)相間の相平衡","耐熱金属材料第123委員会研究報告","耐熱金属材料第123委員会研究報告",,"Vol. 46","No. 1","pp. 25-32",2005,Mar.
"弓削健太郎,寺田芳弘,松尾孝","標準ステレオ三角形内部の方位を応力軸としたγ単相Ni-20mass%Cr合金単結晶のクリープの方位による違い",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1468",2005,
"松尾孝","初めて学ぶ熱処理技術(分担)",,,"日刊工業",,,,2005,
"前田晋,寺田芳弘,松尾孝","[111]方位をもつNi-20mass%Cr合金単結晶の低応力におけるクリープ変形",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1466",2005,
"中島泰信,寺田芳弘,松尾孝","γ単相Ni-20mass%Cr合金多結晶のクリープ変形に伴う結晶方位の変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1465",2005,
"光武正臣,寺田芳弘,松尾孝","[011]方位としたNi-20mass%Cr合金単結晶の低応力におけるクリープ",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1467",2005,
"関根伸仁,松尾孝","改良9Cr鋼の遷移クリープに及ぼす焼きもどし条件の影響",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1610",2005,
"岡本真吾,森田純男,松尾孝,竹山雅夫","Fe-Cr-Ni-Nb合金のAl母相中におけるC14Laves相(Fe2Nb)の析出挙動",,"日本金属学会講演概要",,"Vol. 137",,"pp. 90",2005,
"倉茂将史,福島寛明,松尾孝,竹山雅夫","TiAl基合金の相平衡及び組織形成に及ぼす炭素の影響",,"日本金属学会講演概要",,"Vol. 137",,"pp. 95",2005,
"福島寛明,松尾孝,竹山雅夫","Fe-Ni-Mo３元系におけるγ-Fe/Fe2Mo(C14)Laves相間の相安定性",,"日本金属学会講演概要",,"Vol. 137",,"pp. 179",2005,
"福島寛明,松尾孝,竹山雅夫","Ti-Al-M３元系合金のラメラ界面に析出するβ相の結晶方位と界面観察",,"日本金属学会講演概要",,"Vol. 137",,"pp. 96",2005,
"中島泰信,寺田芳弘,松尾孝","γ単相Ni-20mass%Cr合金多結晶のクリープ変形に伴う結晶方位の変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. p37",2005,
"光武正臣,寺田芳弘,松尾孝","[011]方位としたγ単相Ni-20mass%Cr合金単結晶のクリープ変形に伴う方位の変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. p33",2005,
"弓削健太郎,寺田芳弘,松尾孝","標準ステレオ三角形内部の方位を持つγ単相Ni-20mass%Cr合金単結晶のクリープ変形に伴う結晶方位変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. p31",2005,
"櫻田栄作,松尾孝","ラメラ板と応力軸とのなす角度が約40°のPSTのクリープ変形による方位変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. 1470",2005,
"関根伸仁,松尾孝","改良9Cr鋼の遷移クリープに及ぼす焼きもどし時間の影響",,"材料とプロセス",,"Vol. 18","No. 6","pp. p38",2005,
"櫻田栄作,竹山雅夫,松尾孝","フルラメラ組織をもつTiAl単結晶のクリープ変形に伴う結晶方位変化",,"材料とプロセス",,"Vol. 18","No. 6","pp. p35",2005,
"三浦,美濃部,近藤,松尾","1273Kにてクリープ破断した単結晶Ni基超合金CMSX-4の転位下部組織",,"鉄と鋼",,"Vol. 91","No. 9","pp. 719",2005,
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Mo-Ni3元系におけるα-Fe(A2),γ-Fe(A1)及びλ-Fe2Mo(C14)3相間の相平衡",,"材料とプロセス",,"Vol. 18","No. 6","pp. P39",2005,
"倉茂将史,福島寛明,松尾孝,竹山雅夫","炭素を含むTi-46.5Al-7Nbのα-Ti→γTi-Al変態組織",,"材料とプロセス",,"Vol. 18","No. 6","pp. p36",2005,
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Ni-Mo３元系の高温における相平衡とFe2Mo (C14)相の相安定性","日本金属学会講演大会","日本金属学会講演概要",,,,,2004,Sept.
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Ni-Mo３元系における γ-Fe (A1)/λ-Fe2Mo (C14)相間の相平衡","日本鉄鋼協会講演大会","材料とプロセス",,,,,2004,Mar.
"加藤正太郎,寺田芳弘,松尾孝","極点間の方位をもつγ単相Ni-20mass%Cr合金単結晶のクリープ変形による方位の変化",,"材料とプロセス",,"Vol. 17","No. 6","pp. 1282",2004,
"福島寛明,小林覚,松尾孝,竹山雅夫","γ-TiAl基3元合金のラメラ組織中に微細析出させたβ-Ti相のTEM観察",,"材料とプロセス",,"Vol. 17","No. 6","pp. P26",2004,
"岡本真吾,橋本秀則,松尾孝,竹山雅夫,松本武彦","Ni-41Cr-7Al合金におけるNi<sub>3</sub>Al-γ'相のセル状析出と機械的性質",,"材料とプロセス",,"Vol. 17","No. 6","pp. P31",2004,
"前田晋,寺田芳弘,松尾孝","[-111]方位をもつNi-20mass%Cr合金単結晶におけるクリープの応力依存性",,"材料とプロセス",,"Vol. 17","No. 6","pp. 1281",2004,
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Ni-Mo３元系におけるγ-Fe(A1)/λ-Fe<sub>2</sub>Mo(C14)相間の相平衡",,"材料とプロセス",,"Vol. 17","No. 6","pp. P33",2004,
"永喜正人,齋藤誠,松尾孝,竹山雅夫","EBSD法を用いたTiAl基フルラメラ単結晶の方位解析",,"材料とプロセス",,"Vol. 17","No. 6","pp. P36",2004,
"松尾孝","Ni基単結晶超合金のこれまでとこれから",,"日本ガスタービン学会誌",,"Vol. 32","No. 3","pp. 128",2004,
"松尾孝","クリープ試験での長期教育による智の発現",,"電気製鋼",,"Vol. 75","No. 2","pp. 75",2004,
"三浦信祐,近藤義宏,松尾孝","単結晶Ni基超合金, CMSX-2におけるγ'相のラフト化の引張方位依存性",,"鉄と鋼",,"Vol. 90","No. 5","pp. 250",2004,
"石川茂浩,五味伸幸,松尾孝,竹山雅夫","Fe-Ni-Mo３元系の高温における相平衡とFe<sub>2</sub>Mo(C14)相の相安定性",,"日本金属学会講演概要",,"Vol. 135",,"pp. 204",2004,
"五味伸幸,石川茂浩,松尾孝,竹山雅夫","Fe-Ni-Nb-Zr４元系におけるγ-Fe/Laves相間の相平衡",,"日本金属学会講演概要",,"Vol. 135",,"pp. 203",2004,
"関根伸仁,竹山雅夫,松尾孝","Ti-42Al-8V合金のクリープに及ぼすβ相の影響",,"日本金属学会講演概要",,"Vol. 135",,"pp. 202",2004,
"福島寛明,小林覚,松尾孝,竹山雅夫","フルラメラ組織としたTi-47Al-2.5Moに生成するβ相の析出成長過程",,"日本金属学会講演概要",,"Vol. 135",,"pp. 201",2004,
"岡秀樹,久布白圭司,竹山雅夫,松尾孝","Ti-Al PST結晶のクリープ変形によるラメラ板の回転",,"日本金属学会講演概要",,"Vol. 135",,"pp. 196",2004,
"岡本真吾,橋本秀則,松尾孝,竹山雅夫,松本武彦","微細なγ/γ'セル組織からなるNi-40Cr-7Al合金の強度に及ぼすセル境界の役割",,"日本金属学会講演概要",,"Vol. 135",,"pp. 447",2004,
"中島泰信,寺田芳弘,松尾孝","γ単相Ni-20Cr合金多結晶の負荷直後のクリープ変形挙動",,"材料とプロセス",,"Vol. 17","No. 6","pp. 1280",2004,
"前田晋,寺田芳弘,松尾孝","[-111]方位をもつNi-20mass%Cr合金単結晶のクリープ",,"材料とプロセス",,"Vol. 17","No. 6","pp. P21",2004,
"関根伸仁,竹山雅夫,松尾孝","ラメラ及び塊状(β+γ)組織を有するTi-42Al-8V合金のクリープ変形",,"材料とプロセス",,"Vol. 17","No. 6","pp. P17",2004,
"岡秀樹,久布白圭司,竹山雅夫,松尾孝","Ti-48Al PST結晶のクリープ変形に伴うラメラ組織の変化",,"材料とプロセス",,"Vol. 17","No. 6","pp. P25",2004,
"三浦信祐,近藤義宏,松尾孝","多結晶Ni基超合金, IN-100, のクリープ変形により形成されるγ'相のラフト構造",,"鉄と鋼",,"Vol. 90","No. 8","pp. 567",2004,
"A. Suzuki,H. Kojima,M. Takeyama,T. Matsuo","Alloying Effect on Stability of Multi-Variant Structure of Ni<sub>3</sub>V at Elevated Temperatures",,"Abstruct of TMS Annual Meeting & Exhibition",,"Vol. 132",,"pp. 214",2003,
"三浦信祐,近藤義宏,松尾孝","単結晶Ni基超合金, CMSX-4, の加速クリープ域におけるクリープ速度とγ相チャネルの幅との関係",,"鉄と鋼",,"Vol. 89","No. 12","pp. 1240",2003,
"松尾孝","耐熱鋼，耐熱合金のクリープに及ぼすボロン添加の効果",,"日本鉄鋼協会シンポジウム，鋼中微量ボロンの挙動と性質への影響",,,,"pp. 100",2003,
"田中康智,松尾孝","Duplex組織としたTi-48Al合金の高温クリープ",,"材料とプロセス",,"Vol. 16","No. 6","pp. 1456",2003,
"徳本壮男,寺田芳弘,松尾孝","[001]方位を持つNi-20Cr合金単結晶の低応力におけるクリープ",,"材料とプロセス",,"Vol. 16","No. 6","pp. 1460",2003,
"千蔵真言,鈴木茜,小島久育,竹山雅夫,松尾孝","Ni-γ(A1)/Ni<sub>3</sub>V-γ(D0<sub>22</sub>)2相組織の形態に及ぼすFe添加の効果",,"材料とプロセス",,"Vol. 16","No. 6",,2003,
"五味伸幸,森田純男,竹山雅夫,松尾孝","Fe-Nb-Ni3元系におけるFe<sub>2</sub>Nb Laves相の相領域と格子定数",,"材料とプロセス",,"Vol. 16","No. 6",,2003,
"近藤裕介,松尾孝","γ-TiAl合金のクリープに及ぼす粒界α<sub>2</sub>相の効果",,"材料とプロセス",,"Vol. 16","No. 6",,2003,
"加藤正太郎,寺田芳弘,松尾孝","極点間の方位を持つNi-20Cr合金単結晶のクリープ",,"材料とプロセス",,"Vol. 16","No. 6",,2003,
"五味伸幸,森田純男,山本幸則,竹山雅夫,松尾孝","Fe<sub>2</sub>Nb C14 Laves相の相領域と格子定数変化",,"日本金属学会講演概要",,"Vol. 133",,"pp. 229",2003,
"福島寛明,小林覚,鈴木茜,竹山雅夫,松尾孝","TiAl基3元合金のラメラ組織中に微細析出するβ相の結晶学的特徴",,"日本金属学会講演概要",,"Vol. 133",,"pp. 232",2003,
"永喜正人,山本幸則,竹山雅夫,松尾孝","EBSP法を用いたTi-48Alフルラメラ単結晶/γ単相単結晶間の結晶方位解析",,"日本金属学会講演概要",,"Vol. 133",,"pp. 234",2003,
"鈴木茜,竹山雅夫,松尾孝","D0<sub>22</sub>型Ni<sub>3</sub>Vにおけるvariant界面および異相界面の安定性と整合組織の形成",,"日本金属学会講演概要",,"Vol. 133",,"pp. 242",2003,
"山本幸則,永喜正人,橋本清,竹山雅夫,松尾孝","Ti-Al-Nb3元系におけるγ-TiAl基フルラメラ単結晶の方位制御",,"日本学術振興会，耐熱金属材料第123委員会研究報告",,"Vol. 44","No. 2","pp. 159",2003,
"A. Suzuki,M. Takeyama,T. Matsuo","A1→D0<sub>22</sub> Transformation and Multi-Variant Structure of Ni<sub>3</sub>V",,"Mat. Res. Soc. Symp. Proc.",,"Vol. 753",,"pp. 363",2003,
"M. Ymazaki,H. Hongo,T. Watanabe,K. Kimura,T. Tanabe,T. Matsuo","Precipitation Behavior of Type 304 Austenitic Creep-Resistant Steel After Long-Term Creep Deformation",,"Proceedings of 9th International Conference on The Mechanical Behavior of Materials",,,,,2003,
"S. Kobayashi,M. Takeyama,T. Motegi,N. Hirota,T. Matsuo","Formation of β-Ti Phase in Multi-component Gamma Alloys",,"Mat. Res. Soc. Symp. Proc.",,"Vol. 753",,"pp. 123",2003,
"Y. Yamamoto,M. Takeyama,T. Matsuo","A Mechanism of Polycrystallization in Fully Lamellar Ti-48Al-8Nb Single Crystal Alloy Aged at Elevated Temperatures",,"Mat. Res. Soc. Symp. Proc.",,"Vol. 753",,"pp. 255",2003,
"M. Takeyama,M. Yamanaka,A. Suzuki,Y. Yamamoto,T. Matsuo","Phase Equilibria and Structure Change in Quasibinary Ni<sub>3</sub>Nb-Ni<sub>3</sub>M Systems at Elevated Temperatures",,"Abstruct of TMS Annual Meeting & Exhibition",,"Vol. 132",,"pp. 392",2003,
"M. Takeyama,S. Kobayashi,T. Matsuo","Microstructure Control Using β-Ti Phase for Wrought Gamma TiAl Based Alloys",,"Abstruct of TMS Annual Meeting & Exhibition",,"Vol. 132",,"pp. 426",2003,
"Y. Yamamoto,M. Nagaki,M. Takeyama,T. Matsuo","Crystallographic Considerations for Lamellar Orientation Control of Ti-48Al PST Crystal",,"Abstruct of TMS Annual Meeting & Exhibition",,"Vol. 132",,"pp. 451",2003,
"起橋美夏,山本幸則,竹山雅夫,松尾孝","D0<sub>22</sub>型化合物相 Ni<sub>3</sub>Vの格子定数に及ぼす第3元素の効果",,"日本金属学会講演概要",,"Vol. 132",,"pp. 263",2003,
"鈴木茜,小島久育,千蔵真言,竹山雅夫,松尾孝","Ni-V合金におけるA1/D0<sub>22</sub>2相整合組織の形態に及ぼす第3元素の効果",,"日本金属学会講演概要",,"Vol. 132",,"pp. 295",2003,
"竹山雅夫,松尾孝","Ti-Al系化合物における相平衡と相変態およびその材料開発への応用",,"日本金属学会講演概要",,"Vol. 132",,"pp. 264",2003,
"加藤正太郎,寺田芳弘,松尾孝","[001]-[011]-[-111]ライン上方位を有するNi-20mass%Cr合金単結晶のクリープ",,"材料とプロセス",,"Vol. 16","No. 6","pp. 1462",2003,
"松尾孝","熱処理セミナーテキスト，「金属の基礎」，-鋼から金属の結晶構造と状態図を学ぶ-",,"日本熱処理技術協会",,,,"pp. 1-1?1-10",2003,
"T.Matsuo,Y.Nakamoto,Y.Terada","Change in Shape of Creep Curves of γ Single Phase Ni-20mass%Cr Single Crystals with Decreasing Stress",,"Mater. Sci. Forum",,"Vol. 426-432",,"pp. 737-742",2003,
"Y.Terada,T. Yasui,T. Matsuo","Creep of [011]-Oriented Ni-20mass%Cr Single Crystals",,"Mater. Sci. Forum",,"Vol. 426-432",,"pp. 785-790",2003,
"T. Tokumoto,Y. Terada,T. Matsuo","Low-Stress Creep of Ni-20mass%Cr Single Crystals with [001] Orientation",,"Mater. Sci. Forum",,"Vol. 426-432",,"pp. 803-808",2003,
"森田純男,竹山雅夫,松尾　孝","Fe-Cr-Ni-Nbオーステナイト系耐熱鋼におけるFe<sub>2</sub>NbLaves相の析出",,"材料とプロセス",,"Vol. 15","No. 6","pp. 1173",2002,
"小島久育,鈴木　茜,竹山雅夫,松尾　孝","Vを添加したNi基合金におけるNi<sub>3</sub>(Nb,V)-γ相のTEM観察",,"材料とプロセス",,"Vol. 15","No. 6","pp. P35",2002,
"橋本秀則,鈴木　茜,竹山雅夫,松尾　孝,松本武彦","極低温用NiCrAl合金の強化機構",,"材料とプロセス",,"Vol. 15","No. 6","pp. P34",2002,
"永喜正人,山本幸則,竹山雅夫,松尾　孝","Ti-48Alフルラメラ単結晶の種結晶を用いたラメラ方位の制御",,"材料とプロセス",,"Vol. 15","No. 6","pp. P31",2002,
"田中康智,竹山雅夫,松尾　孝","Duplex組織としたTi-48Al合金の1123Kにおけるクリープ",,"材料とプロセス",,"Vol. 15","No. 6","pp. P13",2002,
"徳本壮男,寺田芳弘,松尾　孝","[001]方位を持つNi-20Cr合金単結晶の高温・低応力におけるクリープ",,"材料とプロセス",,"Vol. 15","No. 6","pp. P12",2002,
"中元能郎,寺田芳弘,松尾　孝","[001]方位としたNi-20Cr合金単結晶の低応力におけるクリープ",,"材料とプロセス",,"Vol. 15","No. 3","pp. 538",2002,
"吉田正志,浅井鉄也,田中康智,竹山雅夫,松尾　孝","異なる組織をもつ２相TiAl合金のクリープの違い",,"材料とプロセス",,"Vol. 15","No. 3","pp. 534",2002,
"小島久育,吉野正崇,鈴木　茜,竹山雅夫,松尾　孝","Ni-Nb-V３系合金におけるD0<sub>22</sub>化合物の析出形態",,"日本金属学会講演概要",,"Vol. 131",,"pp. 160",2002,
"鈴木　茜,山本幸則,竹山雅夫,松尾　孝","Ni<sub>3</sub>VのMulti-variant組織におけるvariantの選択成長による粗大化機構",,"日本金属学会講演概要",,"Vol. 131",,"pp. 160",2002,
"田中康智,吉田正志,竹山雅夫,松尾　孝","Duplex組織としたTi-48Al合金のクリープとフルラメラのものとの比較",,"日本金属学会講演概要",,"Vol. 131",,"pp. 154",2002,
"久布白圭司,平田世紀,竹山雅夫,松尾　孝","Ti-48AlPST結晶のクリープの応力による違い",,"日本金属学会講演概要",,"Vol. 131",,"pp. 153",2002,
"T.Matsuo,T.Nozaki,T.Asai,M.Takeyama","Role of Lamellar Plates in Creep of TiAl Alloy with Fully Lamellar Structure",,"Materials Science Engineering",,"Vol. A329-331",,"pp. 774-779",2002,
"山本幸則,竹山雅夫,松尾　孝","γ-TiAl単相PST結晶の時効による多結晶化機構",,"日本金属学会講演概要",,"Vol. 131",,"pp. 152",2002,
"永喜正人,山本幸則,竹山雅夫,松尾　孝","γ単相種結晶を用いたTi-48Alフルラメラ単結晶合金のラメラ方位制御",,"日本金属学会講演概要",,"Vol. 131",,"pp. 152",2002,
"森田純男,山中瑞久,竹山雅夫,松尾　孝","Fe-Ni基耐熱合金に生成するNi<sub>3</sub>M型化合物の結晶構造変化",,"材料とプロセス",,"Vol. 15","No. 6","pp. P42",2002,
"小林　覚,広田憲亮,竹山雅夫,松尾　孝","TiAl基３元系合金におけるβ相の分解と析出を利用した組織制御",,"日本金属学会講演概要",,"Vol. 130",,"pp. 471",2002,
"山本幸則,竹山雅夫,松尾　孝,橋本　清","Ti-Al-Nb３元号金におけるβ,α,γ,L４相間の相平衡",,"日本金属学会講演概要",,"Vol. 130",,"pp. 394",2002,
"橋本秀則,鈴木　茜,竹山雅夫,松尾　孝,松本武彦","高強度非磁性NiCrAl合金の組織",,"日本金属学会講演概要",,"Vol. 130",,"pp. 227",2002,
"鈴木　茜,竹山雅夫,松尾　孝","A1→D0<sub>22</sub>変態したNi<sub>3</sub>VのMulti-variant組織の熱的安定性",,"日本金属学会講演概要",,"Vol. 130",,"pp. 220",2002,
"N.Miura,N.Harada,Y.Kondo,T.Matsuo","Morphological Change in γ'phase in Different Portions of First Stage High Pressure Turbine Blade of PWA1480",,"Materials for Advanced Power Engineering 2002",,,,"pp. 245-254",2002,
"T.Asai,S.Hirata,M.Takeyama,T.Matsuo","Microstructure in Ti-48at.%Al PST Crystal Subjected to Creep Deformation",,"Materials Science Engineering",,"Vol. A329-331",,"pp. 828-834",2002,
"M.Takeyama,Y.Yamamoto,H.Morishima,K.Koike,S.Y.Chang,T.Matsuo","Lamellar Orientation Control of Ti-48Al PST Crystal by Unidirectional Solidification",,"Materials Science Engineering",,"Vol. A329-331",,"pp. 7-12",2002,
"O.Takahashi,Y.Terada,M.Takeyama,T.Matsuo","Creep Characteristics and Internal Stress in γ-TiAl",,"Materials Science Engineering",,"Vol. A329-331",,"pp. 823-839",2002,
"Y.Terada,Y.Nakamoto,T.Matsuo","Creep of [001]-Oriented Ni-20mass%Cr Single Crystals",,"Materials for Advanced Power Engineering 2002",,,,"pp. 177-186",2002,
"S.Nishikiori,S.Takahashi,S.Satou,T.Tanaka,T.Matsuo","Microstructure and Creep Strength of Fully-lamellar TiAl Alloys Containing Beta-phase",,"Materials Science Engineering",,"Vol. A329-331",,"pp. 802-809",2002,
"芹野大介,寺田芳弘,松尾　孝","Cr-Mo-V鋼の初期クリープ速度の温度による違い",,"材料とプロセス",,"Vol. 15","No. 6","pp. 1325",2002,
"徳本壮男,寺田芳弘,松尾　孝","[001]方位Ni-20Cr合金単結晶の低応力におけるクリープ",,"材料とプロセス",,"Vol. 15","No. 6","pp. 1174",2002,
"茂木孝浩,広田憲亮,小林　覚,竹山雅夫,松尾　孝","TiAl基合金のβ相の生成に及ぼすCr,Mo複合添加の効果",,"日本金属学会講演概要",,"Vol. 131",,"pp. 150",2002,
"小島久育,横田尋己,竹山雅夫,松尾　孝","Ni-Nb系合金におけるNi<sub>3</sub>Nb-δ相の析出に及ぼすV添加の効果  ",,"材料とプロセス",,"Vol. 14","No. 6","pp. P21",2001,
"松尾　孝","金属の基礎と状態図一金属材料の結晶構造、状態図と相変態一",,"第1回熱処理技術セミナー",,,,"pp. 1-1-1-9",2001,
"森田純男,竹山雅夫,松尾　孝","Fe-Cr-Ni-Nbオーステナイト系耐熱鋼に生成する化合物相と相平衡",,"ヤングサイエンティストフォーラム発表概要集",,"Vol. 4",,"pp. 9",2001,
"小林　覚,竹山雅夫,松尾　孝","TiAl基合金のβ-Ti相を利用した組織制御とその実用化への応用",,"耐熱金属材料第123委員会研究報告",,"Vol. 42","No. 4","pp. 381-392",2001,
"松尾　孝,竹山雅夫,平田世紀","TiAl基合金のクリープにおよぼすラメラ板の役割",,"耐熱金属材料第123委員会研究報告",,"Vol. 42","No. 4","pp. 367-380",2001,
"鈴木　茜,竹山雅夫,松尾　孝","Ni<sub>3</sub>VのA1→D0<sub>22</sub>変態によるMulti-variant構造の形成",,"耐熱金属材料第123委員会研究報告",,"Vol. 42","No. 2","pp. 241-249",2001,
"小林　覚,広田憲亮,竹山雅夫,松尾　孝","Ti-Al-M3元系のα→β＋γ反応経路におけるα相の分解一過飽和度の影響一",,"耐熱金属材料第123委員会研究報告",,"Vol. 42","No. 2","pp. 227-239",2001,
"吉田正志,浅井鉄也,竹山雅夫,松尾　孝","マッシブ組織としたTi-48Al合金のクリープ",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1335",2001,
"久布白圭司,平田世紀,竹山雅夫,松尾　孝","応力軸に対するラメラ板の方位が異なるTiAl合金でのα<sub>2</sub>板の崩壊",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1334",2001,
"平田世紀,吉田正志,竹山雅夫,松尾　孝","フルラメラ組織としたTi-48at%Al単結晶合金のクリープ変形",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1333",2001,
"田中　匠,寺田芳弘,松尾　孝","Taを添加したNi-20Cr合金単結晶のクリープの結晶方位依存性",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1327",2001,
"安井健志,寺田芳弘,松尾　孝","[011]方位としたNi-20Cr合金単結晶の低応力におけるクリープ",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1326",2001,
"中元能郎,寺田芳弘,松尾　孝","[001]方位としたNi-20Cr合金単結晶のクリープの応力依存性",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1325",2001,
"芹野大介,寺田芳弘,松尾　孝","Cr-Mo-V鋼の遷移クリープ域の応力による違い",,"材料とプロセス",,"Vol. 14","No. 6","pp. 1241",2001,
"久布白圭司,平田世紀,竹山雅夫,松尾　孝","ラメラ方位が77°のTi-48at%Al PST結晶のクリープ変形",,"材料とプロセス",,"Vol. 14","No. 6","pp. P27",2001,
"芹野大介,松尾　孝","Cr-Mo-V鋼の遷移クリープ域における変形",,"材料とプロセス",,"Vol. 14","No. 6","pp. P26",2001,
"安井健志,寺田芳弘,松尾　孝","[011]方位を有するNi-20Cr合金単結晶の高温クリープ",,"材料とプロセス",,"Vol. 14","No. 6","pp. P25",2001,
"金谷洋平,山本幸則,竹山雅夫,松尾　孝","Ti-48Alフルラメラ単結晶合金の昇温過程におけるラメラ組織の安定性",,"材料とプロセス",,"Vol. 14","No. 6","pp. P23",2001,
"森田純男,山内著史,竹山雅夫,松尾　孝","Ni-Nb-Fe3元系の1200℃における相平衡と出現相の構造解析",,"材料とプロセス",,"Vol. 14","No. 6","pp. P22",2001,
"広田憲亮,小林　覚,竹山雅夫,松尾　孝","Nb,Vを複合添加したTiAl基4元系合金におけるβ相の生成予測と評価",,"第129回日本金属学会講演概要",,"Vol. 129",,"pp. 298",2001,
"小林　覚,広田憲亮,竹山雅夫,松尾　孝","β相の生成予測に基づいたγTiAl基3元系合金の組織制御",,"第129回日本金属学会講演概要",,"Vol. 129",,"pp. 297",2001,
"小島久育,鈴木　茜,竹山雅夫,松尾　孝","Ni-Nb系合金のV添加による準安定Ni<sub>3</sub>Nb-γ相の生成と安定相Ni<sub>3</sub>Nb-δの析出形態変化",,"第129回日本金属学会講演概要",,"Vol. 129",,"pp. 216",2001,
"起橋美夏,山中瑞久,竹山雅夫,松尾　孝","Ni<sub>3</sub>Vの軸比および相安定性に及ぼす第3元素の効果",,"第129回日本金属学会講演概要",,"Vol. 129",,"pp. 215",2001,
"鈴木　茜,竹山雅夫,松尾　孝","Ni-V2元系におけるA1(Ni-γ)→D0<sub>22</sub>(Ni<sub>3</sub>V-γ)変態とγ/γ2相組織の発達",,"第129回日本金属学会講演概要",,"Vol. 129",,"pp. 215",2001,
"TAKASHI MATSUO","Role of Transient Creep in High Cr Ferritic Steels",,"Proceedings of NRIM-MPA Workshop 2001 Creep and Fatigue Performance of High Cr Steels for Elevated Temperature Plants",,,,"pp. 29-36",2001,
"T.Matsuo,T.Kashiwa,M.Nijyo,Y.Terada","Effects of tantalum and rhenium on creep in single crystals of nickel-20% chromium",,"Aerospace Materials","Aerospace Materials",,,"pp. 285-293",2001,
"鈴木　茜,竹山雅夫,松尾　孝","Ni<sub>3</sub>VのAl→DO<sub>22</sub>変態によるmulti-variant構造の時効に伴う変化",,"第128回日本金属学会講演概要",,"Vol. 128",,"pp. 274",2001,
"小林　覚,竹山雅夫,松尾　孝","γ-TiAl基合金のβ相を利用した組織制御一α→β+γ反応経路における組織形成に及ぼす第3元素の効果一",,"第128回日本金属学会講演概要",,"Vol. 128",,"pp. 267",2001,
"広田憲亮,小林　覚,竹山雅夫,松尾　孝","γ-TiAl基合金のβ相を利用した組織制御一Moの添加によるα→β+γ反応経路における組織形成一",,"第128回日本金属学会講演概要",,"Vol. 128",,"pp. 267",2001,
"E.Sato,Y.Kondo,T.Matsuo","Stereological Analysis of Rafting in Single Crystal CMSX-4",,"Proceedings of 7th Int.Conf.on Creep and Fatigue at Elevated Temperatures",,,,"pp. 585-589",2001,
"T.Matsuo,D.Serino,Y.Terada","Change in feature of Transient Creep with Decreasing Stress",,"Proceedings of 7th Int.Conf.on Creep and Fatigue at Elevated Temperatures",,,,"pp. 551-555",2001,
"M.Yamazaki,H.Hongo,T.Watanabe,K.Kimura,H.Irie,T.Matsuo","Effect of Microstructural Changes During Creep on the Creep Rate at 823K in Type 304 Heat Resistant Steel",,"Proceedings of 7th Int.Conf.on Creep and Fatigue at Elevated Temperatures",,,,"pp. 389-393",2001,
"M.Yamazaki,K.Kimura,H.Hongo,T.Watanabe,H.Irie,T.Matsuo","Microstructural Evolution of Type 304 Austenitic Heat Resistant Steel after Long-Term Creep Exposure at the Elevated Temperatures",,"Proceeding of 9th Int.Conf.on Creep & Fracture of Engineering Materials & Structures",,,,"pp. 659-667",2001,
"N.Miura,Y.Kondo,M.Okabe,T.Matsuo","Creep in Oxide Dispersion Strengthened Ni-based Superalloy, MA754, with Different Orientation of Columnar Grain",,"Proceeding of 9th Int.Conf.on Creep & Fracture of Engineering Materials & Structures",,,,"pp. 469-477",2001,
"N.Miura,Y.Kondo,T.Matsuo","Stress Dependence of Strain Attained Rafting of γ'phase in　Single Crystal Nickel-based Superalloy, CMSX-4",,"Proceeding of 9th Int.Conf.on Creep & Fracture of Engineering Materials & Structures",,,,"pp. 437-445",2001,
"Y.Terada,D.Kawaguchi,T.Matsuo","Creep Deformation of Ni-20mass%Cr Single Crystals with [001],[011] and [-111] Orientations",,"Proceeding of 9th Int.Conf.on Creep & Fracture of Engineering Materials & Structures",,,,"pp. 427-435",2001,
"松尾　孝（分担）","マテリアルの事典(分担）",,"朝倉書店","朝倉書店",,,,2001,
"H.Miyazawa,R.Takaku,D.Kawaguchi,Y.Terada,T.Matsuo","Creep and Evolution of Dynamic Recrystallization in g Single Phase Single Crystals Located at Poles in Standard Stereo-Triangle",,"Key Engineering Materials",,"Vol. 171-174",,"pp. 577-584",2000,
"松尾　孝","応力低下にともなう1050℃でのクリープ変形の変化",,"耐熱鋼・耐熱合金の高強度化研究会最終報告書",,,,"pp. 174-177",2000,
"松尾　孝","耐熱合金W.G.で取りあげた調査研究の目的とそれらの独創性",,"耐熱鋼・耐熱合金の高強度化研究会最終報告書",,,,"pp. 157-158",2000,
"松尾　孝","Ni基超合金単結晶の高強度化とg'相のラフト化",,"耐熱鋼・耐熱合金の高強度化研究会最終報告書",,,,"pp. 121-123",2000,
"山崎政義,本郷宏通,渡部　隆,木村一弘,田辺龍彦,入江宏定,松尾　孝","723-973Kにおいて長時間破断したSUS304の微細組織",,"耐熱金属材料第123委員会研究報告",,"Vol. 41","No. 2","pp. 171-189",2000,
"松尾　孝","異色蔵前人シリーズ：第12回真空管アンプ作り",,"蔵前工業会誌",,"Vol. 8/9",,"pp. 33",2000,
"山崎政義　本郷宏通　渡部隆　木村一弘　田辺龍彦　入江宏定　松尾孝","SUS304のクリープ速度?時間曲線に及ぼす炭素及び窒素の影響",,"耐熱金属材料第123委員会研究報告",,"Vol. 41","No. 2","pp. 171-189",2000,
"松尾孝","g-TiAl 基PST 結晶の時効に伴う組織変化",,"日本金属学会講演概要",,"Vol. 126",,"pp. 175",2000,
"松尾孝","Ni3Nb-NiTi擬２元系間に存在する中間層の構造",,"日本金属学会講演概要",,"Vol. 127",,"pp. 430",2000,
"松尾孝","g-TiAl 基PST 結晶の時効によるラメラ組織の崩壊と多結晶化",,"日本金属学会講演概要",,"Vol. 127",,"pp. 430",2000,