"七海元紀,水島大介,安原鋭幸,大竹尚登","金属薄板のメカノメタラジカル接合法の開発と接合機構の解明",,"塑性と加工(日本塑性加工学会誌）","一般社団法人日本塑性加工学会","Vol. 56","No. 654","pp. 563-569",2015,July
"本田豊,安原鋭幸,赤坂大樹,大竹尚登","繊維と母材の親和性向上による樹脂基CNT複合材料の高強度化","第27回ダイヤモンドシンポジウム","第27回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 192-193",2013,Nov.
"Yuichi Sakurada,Mai Takashima,Toshiyuki Yasuhara,Yoshinao Iwamoto,Makoto Matsuo,Naoto Ohtake","Detecting Method of Bulk Defects in DLC Films Using Light Scattering","14th International Conference on Precision Engineering(ICPE2012)","Emerging Technology in Precision Engineering",,,,"pp. 793-798",2012,Nov.
"本田豊,安原鋭幸,赤坂大樹,大竹尚登","樹脂基CNT複合材料の機械的強度におけるCNT表面処理の影響","第20回機械材料・材料加工技術講演会","M&P2012",,"  CD-ROM",,,2012,Nov.
"櫻田 悠一,高島 舞,安原 鋭幸,岩本 喜直,松尾 誠,大竹 尚登","光散乱を利用したDLC膜のバルク欠陥検出法","日本機械学会2012年度年次大会","日本機械学会2012年度年次大会講演論文集DVD","日本機械学会",,,,2012,Sept.
"Yuichi Sakurada,Mai Takashima,Toshiyuki Yasuhara,Yoshinao Iwamoto,Makoto Matsuo,Naoto Ohtake","Detection of Bulk Defects of DLC Films Deposited by Pulse Plasma CVD","IUMRS-International Conference on Electronic Materials2012","IUMRS-ICEM2012","IUMRS-International Conference on Electronic Materials2012","  CD-ROM",,,2012,Sept.
"Hidetoshi Maeda,Tadasuke Asano,Yoshihiko Mochizuki,Toshiyuki Yasuhara,Naoto Ohtake","Synthesis of diamond films by plasma enhanced hot-filament CVD at low substrate temperature","IUMRS-International Conference on Electronic Materials2012","IUMRS-ICEM2012","IUMRS-International Conference on Electronic Materials2012","  CD-ROM",,,2012,Sept.
"Naoto Ohtake,Tomio Uchi,Toshiyuki Yasuhara,Mai Takashima","Characteristics of Diamond-Like Carbon Films Deposited on Polymer Dental Materials",,"Japanese Journal of Applied Physics","The Japan Society of Applied Physics","Vol. 51",,,2012,Aug.
"平間 俊晴,安原 鋭幸,大竹 尚登","CFRPの放電切削加工の試み","第25回ダイヤモンドシンポジウム","第25回ダイヤモンドシンポジウム講演要旨集","ニューダイヤモンドフォーラム",,,"pp. 196-197",2011,Dec.
"安原鋭幸,榎本和城,大竹尚登","CNT/PP複合材料",,"強化プラスチックス","社団法人強化プラスチック協会","Vol. 56","No. 10","pp. 336-342",2011,Nov.
"平間俊晴,安原鋭幸,大竹尚登","CFRPの放電切削加工法の開発","日本機械学会2011年度年次大会","日本機械学会2011年度年次大会","一般社団法人日本機械学会",,,"  CD-ROM",2011,Sept.
"Toshiyuki Yasuhara,Hidetoshi Ando,Naoto Ohtake","Synthesis of Vertical Aligned CNT and Effects of CNT Length on Its Polymer Composite Properties","JSME/ASME 2011 International Conference on Materials and Processing","Proceedings of the JSME/ASME 2011 International Conference on Materials and Processing",,,,,2011,June
"安原鋭幸,大竹尚登","樹脂基カーボンナノチューブ複合材料における成形条件が電気的特性に及ぼす影響","第24回ダイヤモンドシンポジウム","第24回ダイヤモンドシンポジウム講演要旨集","ニューダイヤモンドフォーラム",,,"pp. 184-185",2010,Nov.
"太田慶助,安原鋭幸,大竹尚登","CNT/PC複合材料におけるCNT結晶完全性が電気的特性に及ぼす影響","第24回ダイヤモンドシンポジウム","第24回ダイヤモンドシンポジウム講演要旨集","ニューダイヤモンドフォーラム",,,"pp. 186-187",2010,Nov.
"安原鋭幸,大竹尚登","樹脂基カーボンナノチューブ複合材料の射出成形における成形条件とフィラー挙動の関係","第61回塑性加工連合講演会","第61回塑性加工連合講演会講演論文集","日本塑性加工学会",,,"pp. 9-10",2010,Oct.
"太田 慶助,安藤 英俊,安原 鋭幸,大竹 尚登","CNT/PC 複合材料におけるCNT 繊維長が機械的特性に及ぼす影響","第71回応用物理学会学術講演会","第71回応用物理学会学術講演会講演予稿集","応用物理学会","  CD-ROM",,,2010,Sept.
"安原鋭幸","プラスチック成形加工における微細形状の転写技術",,"塑性と加工",,"Vol. 51","No. 592","pp. 395-399",2010,May
"安原鋭幸","マイクロ・ナノ成形",,"成形加工",,"Vol. 21","No. 7","pp. 405-408",2009,July
"Masanori Saito,Toshiyuki Yasuhara,Hiroya Murakami,Naoto Ohtake","Tribological Properties of Amorphous Boron Nitride Films Prepared by Nanopulse Plasma CVD",,"Journal of Solid Mechanics and Materials Engineering",,"Vol. 3",,"pp. 217-226",2009,
"安藤英俊,安原鋭幸,村上碩哉,大竹尚登","CNT繊維長が複合材料特性に与える影響",,"第22回 ダイヤモンドシンポジウム 講演要旨集",,,,"pp. 174-175",2008,Nov.
"安藤英俊,安原鋭幸,村上碩哉,大竹尚登","CNT繊維長が複合材料特性に及ぼす影響",,"成形加工シンポジア'08",,,,"pp. 237-238",2008,Oct.
"齊藤卓志,井手慎之介,伊藤浩志,安原鋭幸,川口達也,佐藤勲","ポリプロピレン薄肉射出成形品のウェルドに関する研究",,"成形加工",,"Vol. 20","No. 10","pp. 776-780",2008,Sept.
"TOSHIYUKI YASUHARA","Effect of Injection Molding Conditions on Surface Conductivity of Polymer Matrix CNT Composites",,"The Japan-Korea Plastics Processing Joint Seminar 2008",,,,"pp. 63-68",2008,Sept.
"安原鋭幸","CNT/Polymer複合材料の電気的特性及び成形品表層部近傍における濃度低下現象の解明",,"成形加工'08",,,,"pp. 205-206",2008,June
"Masanori Saito,Toshiyuki Yasuhara,Hiroya Murakami,Naoto Ohtake","Tribological Properties of Amorphous Boron Nitride Films Prepared by Nanopulse Plasma CVD",,"Proc. 3rd Int. Conf. Materials and Processing",,"Vol. 1","  MSEC/ICM&P","  72550-1~72550-7",2008,
"林 芳広,安原鋭幸,相原広忠,榎本和城,大竹尚登,葛巻 徹,光田好孝","CNTのナノメカニクスと樹脂基複合材料の作製および機械的特性評価",,"日本材料学会JCOM-36講演論文集?材料・構造の複合化と機能化に関するシンポジウム?",,,,"pp. 32-34",2007,
"河瀬 暁,林 芳広,荒木康之,安原鋭幸,村上碩哉,大竹尚登","樹脂基CNT複合材料の表面導電性に及ぼす射出成形条件の影響¬?第２報?フロー・フロントにおけるフィラー濃度低下現象",,"第21回ダイヤモンドシンポジウム講演要旨集",,,,"pp. 146-147",2007,
"T. Yasuhara,N. Taniguchi,H. Momose,N. Ohtake,J. V. R. Heberlein","Deposition of TI-DLC Films by Arc-Glow Hybrid Plasma CVD","Int. Conf. New Diamond and Nano Carbons",,"Abstract of Int. Conf. New Diamond and Nano Carbons",,,"pp. 208",2007,
"河瀬 暁,林 芳広,安原鋭幸,村上碩哉,大竹尚登","CNT／Polymer複合材料の射出成形におけるフィラー濃度不均一現象の解明",,"平成19年度塑性加工春季講演会講演論文集",,,,"pp. 109-110",2007,
"河瀬暁,林芳広,荒木康之,安原鋭幸,村上碩哉,大竹尚登","樹脂基CNT複合材料の表面伝導性に及ぼす射出成形条件の影響","第20回ダイヤモンドシンポジウム","ニューダイヤモンドフォーラム",,,,"pp. 100-101",2006,Nov.
"Toshiyuki Yasuhara,Yasuyuki Araki,Hiroshi Aihara,Hiroshi Ito,Takushi Saito,Hiroya Murakami,Naoto Ohtake","Mechanical Properties of Carbon Nanofiber Reinforced Composites and Fiber Orientation Behavior in Thin-Wall Injection Molding",,"The Korea-Japan Plastics Processing Joint Seminar 2006",,"Vol. 1","No. 1","pp. 25-28",2006,Sept.
"Toshiyuki YASUHARA,Yasuyuki ARAKI,Hiroshi AIHARA,Hiroshi ITO,Takushi SAITO,Naoto OHTAKE","Influence of Fiber Orientation on Mechanical Properties in Thin-wall Injection molding of CNF/PP Composites","Polymer Processing Society 22nd Annual Meeting in YAMAGATA","CD-ROM Proceedings of Polymer Processing Society 22nd Annual Meeting",,,,"pp. SP6-12.pdf",2006,July
"高岡俊允,八尾和幸,北川清一郎,伊藤浩志,安原鋭幸,斉藤卓志","非晶性高分子材料における超微細構造を有する成形品の成形転写性と高次構造","第17回プラスチック成形加工学会年次大会","成形加工'06",,,,"pp. 33-34",2006,June
"安原鋭幸,山田毅,高橋淳,大岡進,下川俊彦,大竹尚登","MMA/Styrene系樹脂の転写特性","第17回プラスチック成形加工学会年次大会","成形加工'06",,,,"pp. 5-6",2006,June
"伊藤浩志,風間邦彦,安原鋭幸,斉藤卓志,鞠谷雄士,林和樹,山極佳年,坂田雄一","マイクロ射出成形プロセスにおける超薄肉流路でのオンライン光学異方性計測","第17回プラスチック成形加工学会年次大会","成形加工'06",,,,"pp. 15-16",2006,June
"林芳広,大久保毅,市田真巳,佐藤倫史,安原鋭幸,大竹尚登","樹脂基CNT複合材料における射出成形条件の電気的特性に及ぼす影響","第17回プラスチック成形加工学会年次大会","成形加工'06",,,,"pp. 251-252",2006,June
"林芳広,相原宏忠,佐藤倫史,榎本和城,安原鋭幸,村上碩哉,大竹尚登","CNTの表面処理とその複合材料フィラーとしての評価","平成18年度　塑性加工春季講演会","平成18年度　塑性加工春季講演会　講演論文集",,,,"pp. 289-290",2006,May
"荒木康之,相原広志,安原鋭幸,伊藤浩志,斉藤卓志,村上碩哉,大竹尚登","CNF複合材料射出成形およびその機械的特性における繊維配向の影響","平成18年度　塑性加工春季講演会","平成18年度　塑性加工春季講演会　講演論文集",,,,"pp. 252-253",2006,May
"Kazuki Enomoto,Shintaro Kitakata,Toshiyuki Yasuhara,Naoto Ohtake,Toru Kuzumaki,Yoshitaka Mitsuda","Measurement of Young's modulus of carbon nanotubes by nanoprobe manipulation in a transmission electron microscope",,"Applied Physics Letter",,"Vol. 88",,"pp. 153115",2006,Apr.
"藤原修,榎本和城,安原鋭幸,村上碩哉,寺木潤一,大竹尚登","樹脂基カーボンナノファイバー複合材料の熱伝導率",,"精密工学会誌",,"Vol. 72","No. 1","pp. 95-99",2006,Jan.
"林芳広,相原広忠,安原鋭幸,村上碩哉,大竹尚登","CNTへのアモルファス炭素膜合成およびそのCNT複合材料としての機械的特性評価",,"第20回ダイヤモンドシンポジウム講演要旨集",,,,"pp. 98-99",2006,
"河瀬 暁,林 芳広,荒木康之,安原鋭幸,村上碩哉,大竹尚登","樹脂基CNT複合材料の表面導電性に及ぼす射出成形条件の影響",,"第14回機械材料・材料加工技術講演会講演論文集",,,,"pp. 233-234",2006,
"河瀬 暁,林 芳広,荒木康之,安原鋭幸,村上碩哉,大竹尚登","樹脂基CNT複合材料の表面導電性に及ぼす射出成形条件の影響",,"第20回ダイヤモンドシンポジウム講演要旨集",,,,"pp. 100-101",2006,
"Kazuki Enomoto,T. Yasuhara,N. Ohtake","Measurement of Young’s Modulus of Carbon Nanotubes by Nanoprobe Manipulation in a Transmission Electron Microscope",,"Appl. Phys. Lett.",,"Vol. 88",,"  153115",2006,
"N. Ohtake,K. Enomoto,S. Kitakata,T. Yasuhara,T. Kuzumaki,Y. Mitsuda","Measurement of Young’s Modulus of Carbon Nanotubes by Nanoprobe Manipulation in a Transmission Electron","The 2nd India-Japan Joint Seminar on Micro/Nano Manufacturing Science","Proc. The 2nd India-Japan Joint Seminar on Micro/Nano Manufacturing Science",,,,"pp. 179-181",2006,
"相原広忠,林芳広,佐藤倫史,荒木康之,赤坂大樹,安原鋭幸,大竹尚登","CNT表面へのDLC膜合成及び複合材フィラーとしての評価","2006年度精密工学会春季大会","2006年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 645-646",2006,
"Toshiyuki YASUHARA,Hiroshi AIHARA,Hiroshi ITO,Takushi SAITO,Kazuki ENOMOTO,Naoto OHTAKE","Mechanical Properties of Carbon Nanofiber Reinforced Composites and Fiber Orientation Behavior in Thin-wall Injection Molding","Asian Workshop on Polymer Processing 2005","CD-ROM Proceedings of The First Taiwan/Japan International Ploymer Processing Conference",,,,"pp. 20.pdf",2005,Oct.
"安原鋭幸,相原広志,荒木康之,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","カーボンナノファイバー複合材料薄肉成形品の機械的特性における繊維配向の影響",,"精密工学会秋季大会学術講演会",,,,"pp. G63",2005,Sept.
"相原広志,安原鋭幸,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","樹脂基カーボンナノファイバー複合材料薄板の射出成形とその特性評価",,"成形加工’05",,,,"pp. 95-96",2005,June
"Toshiyuki Yasuhara,Hiroshi Aihara,Hiroshi Ito,Takushi Saito,Kazuki Enomoto,Naoto Ohtake","Mechanical Properties of Carbon Nano-Fiber Reinforced Composites in Thin-wall Injection Molding",,"CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting",,,,"pp. P9-33.pdf",2005,June
"安原鋭幸,相原広志,伊藤浩志,斉藤卓志,榎本和城,大竹尚登","樹脂基CNF 複合材料の機械的特性における薄肉化の影響",,"精密工学会春季大会　学術講演会講演論文集",,,,"pp. K74",2005,Mar.
"ENOMOTO, K,YASUHARA, T.,OHTAKE, N","Mechanical Properties of Injection-Molded Composites of Carbon Nanofibers in Polypropylene Matrix",,"New Diamond and Frontier Carbon Technology",,"Vol. 15","No. 2","pp. 59-72",2005,Feb.
"Hiroshi ITO,Yusuke YAGISAWA,Takushi SAITO,Toshiyuki YASUHARA,Takeshi KIKUTANI,Yoshitoshi YAMAGIWA","Fundamental Study on Stracture Development of Thin-Wall Injection Molded Products",,"Theoretical and Mechanics Japan",,"Vol. 54",,"pp. 263-268",2005,
"ENOMOTO, K.,YASUHARA, T.,KITAKATA, S.,MURAKAMI, H.,OHTAKE","Frictional Properties of Carbon Nanofiber Reinforced Polymer Matrix Composites",,"New Diamond and Frontier Carbon Technology",,"Vol. 14","No. 1","pp. 11-20",2004,Jan.
"安原鋭幸","プラスチック加工における微細転写性",,"成形加工",,"Vol. 15","No. 4","pp. 260-265",2003,Apr.
"大竹尚登,榎本和城,安原鋭幸","カーボンナノチューブ複合材料",,"日本複合材料学会誌",,"Vol. 28","No. 6","pp. 220-227",2002,June
"今村博史,安原鋭幸,加藤和典,大竹尚登,村上碩哉","射出成形における微細凹凸形状の転写機構",,"成形加工シンポジア'02　講演論文集",,,,"pp. 51-52",2002,
"安原鋭幸,今村博史,加藤和典,大竹尚登","射出成形における微細形状の転写モデル",,"成形加工'02　講演論文集",,,,"pp. 183-184",2002,
"伊藤浩志,岩橋俊之,田中勝一,玉置文博,長岡　猛,中山和郎．馬場文明,藤田章洋,松岡信一,丸橋吉次,溝口敬信,安原鋭幸,吉井正樹","プラスチック成形加工データブック　第2版",,"日刊工業新聞社","日刊工業新聞社",,,"pp. 57-83",2002,
"Toshiyuki YASUHARA,Kazunori KATO,Hiroshi IMAMURA,Naoto OHTAKE","Transcription Mechanism of Minute Surface Pattern in Injection Molding",,"Proceedings of JSME/ASME International Conference on Materials and Processing 2002",,,,"pp. 605-610",2002,
"安原鋭幸,今村博史,加藤和典,大竹尚登","射出成形における微細V溝形状の転写特性",,"平成14年度　塑性加工春期講演会　講演論文集",,,,"pp. 485-486",2002,
"安原鋭幸","射出成形における微細形状の転写機構",,"塑性と加工",,"Vol. 43","No. 492","pp. 45-50",2002,
"安原鋭幸","射出成形における微細形状の転写性に関する研究",,,,,,,2002,
"安原鋭幸,加藤和典,今村博史,大竹尚登","射出成形における表面微細形状転写メカニズムの解明",,"成形加工'01",,,,"pp. 239-240",2001,
"安原鋭幸,加藤和典,今村博史,大竹尚登","プラスチックの射出成形における微細形状の転写性 -V溝サイズの影響について-",,"塑性加工春期講演会講演論文集",,,,"pp. 257-258",2001,
"安原鋭幸,加藤和典,杉本　敦,大竹尚登","成形機および金型の剛性が転写特性に及ぼす影響",,"成形加工",,"Vol. 13","No. 10","pp. 693-699",2001,
"安原鋭幸,加藤和典,藤澤直樹,大竹尚登","通電加熱金型を用いた射出成形における転写精度向上に関する研究",,"日本機械学会論文集",,"Vol. 67","No. 657","pp. 422-429",2001,
"安原鋭幸,加藤和典,今村博史,大竹尚登","射出成形における微細形状の転写機構 -樹脂物性の影響について-",,"成形加工シンポジア'01講演論文集",,,,"pp. 143-144",2001,
"安原鋭幸　加藤和典　藤沢直樹　大竹尚登","光ディスク基板の射出成形における転写特性の研究",,"成形加工",,"Vol. 12","No. 6","pp. 362-367",2000,
"安原鋭幸","通電加熱金型による微細凹凸パターンの転写特性",,"成形加工'99",,,,"pp. 197-198",1999,
"安原鋭幸","光ディスクの射出成形における金型の変形と転写不良",,"塑性加工春期講演会講演論文集",,,,"pp. 45-46",1999,
"TOSHIYUKI YASUHARA","Multiple transcrioption of pits in solidifying stage in injection molding of optical disk",,"15th Int. Meet. Polym. Proc. Soc.",,,,"pp. R34",1999,
"安原鋭幸","射出成形時における成形機及び金型の剛性の成形品形状への影響",,"成形加工シンポジア'99講演論文集",,,,"pp. 271-272",1999,
"安原鋭幸","射出成形における微細形状の転写特性",,"塑性加工春季講演会講演論文集",,,,"pp. 111",1998,
"TOSHIYUKI YASUHARA","Improvement of Transcription Property of Fine Surface Structure by Rapid Heating Mold",,"Extended abstructs of 14th annual meeting of the polymer processing society",,,,"pp. 41",1998,
"加藤和典,安原鋭幸","射出成形における転写性および表面性状の制御技術",,"成形加工",,"Vol. 9","No. 11","pp. 836-824",1997,Nov.
"TOSHIYUKI YASUHARA","Flowmark Generation in Injection Molding of Optical Disk",,"JSPP'97 Tech. papers",,,,"pp. 327",1997,
"安原鋭幸","射出圧縮装置による光ディスク基板の転写不良生成メカニズムの解明",,"形成加工シンポジア'97",,,,"pp. 13",1997,
"TOSHIYUKI YASUHARA","Transcription behavior of fine surface structure by rapid heating stamper",,"13rd Int. Meet. Polym. Proc",,,,,1997,
"安原鋭幸","光ディスクの射出成形における転写不良の生成機構",,"平成8年度 塑性加工春季講演会講演論文集",,,,"pp. 278",1996,
"TOSHIYUKI YASUHARA","Transcription Property of Fine Surface Stracture by Using Direct Current Heating Stamper in Injection Molding",,"JSPP International and Annual Conterence '96",,,,"pp. 193",1996,
"安原鋭幸","光ディスクの射出成形におけるフローマークの生成機構",,"成形加工 '95",,,,"pp. 31",1995,
"TOSHIYUKI YASUHARA","On Flowmark Generation in Injection Molding into High Pressure Die Carity",,"JSPP '95 Sympo.Papers",,,,"pp. 197",1995,
"安原鋭幸","光ディスクの射出成形における多重転写の研究",,"平成7年度 塑性加工春季講演会講演論文集",,,,"pp. 179",1995,
"安原鋭幸","光ディスクの射出成形における転写精度の研究",,"第45回 塑性加工連合講演会講演論文集",,,,"pp. 129",1994,
"安原鋭幸","気相合成ダイヤモンドの超精密切削バイトへの適用",,"精密工学会誌",,"Vol. 60","No. 11","pp. 1654",1994,
"安原鋭幸","光ディスクの射出成形における転写不良の検討",,"プラスチック成形加工学会 第6回年次大会学術講演会講演論文集",,,,"pp. 241-242",1994,
"TOSHIYUKI YASUHARA","Application of CVD Diamond Chips for Ultraprecision cutting Tools",,"2nd International Conference on the Applications of Diamond Films and Related Materials",,,,"pp. 559-558",1993,
"安原鋭幸","気相合成ダイヤモンドの超精密バイトへの適用",,"1993年度精密工学会秋季大会学術講演会講演論文集",,,,"pp. 389-390",1993,
"安原鋭幸",,,,,,,,,