"Yuya Tamura,Kanta Yoshii,Kasumi Tsutsumi,Hiroki Akasaka,Naoto Ohtake,Yuki Hirata","Synthesis of 2D Nanosheets Using Magnetron Sputtering and Heat Annealing","34th International Conference on Diamond and Carbon Materials",,,,,,2024,Sept.
"Yuki Hirata,Yuya Tamura,Hiroki Akasaka,Naoto Ohtake","Synthesis of 2D Material and Van Der Waals Heterostructures Using Sputtering-Annealing Hybrid Process","34th International Conference on Diamond and Carbon Materials",,,,,,2024,Sept.
"玉井 大鷹,佐向 亮,平田 祐樹,大竹 尚登,赤坂 大樹","アルミニウム管内へのダイヤモンド状炭素膜の形成による流体圧力損失抑制","第85回 応?物理学会 秋季学術講演","第85回応用物理学会 秋季学術講演会要旨集",,,,,2024,Sept.
"長谷 嘉琉,Tunmee Sarayut,青野 祐子,Rittihong Ukit,平田 祐樹,大竹 尚登,赤坂 大樹","レーザ接合による 水素化アモルファス炭素膜の構造変化","第85回 応?物理学会 秋季学術講演","第85回応用物理学会 秋季学術講演会要旨集,",,,,,2024,Sept.
"坂倉朱音,中村心哉,加納 眞,田村幸雄,松本圭司,山本 浩,平田祐樹,赤坂大樹,田中真二,菊池雅男,大竹尚登","異?的粗さを有する基材に作製したDLC膜の環境調和型油潤滑下の摩擦特性","2024年度精密工学会秋季大会学術講演会",,,,,,2024,Sept.
"Yucheng Li,Chiaki Koga,Yuki Hirata,Hiroki Akasaka,Hiroyasu Kanetaka,Naoto Ohtake","Deposition and evaluation of mechanical and antimicrobial properties of multilayered Cu-DLC films with segmented structure","34th International Conference on Diamond and Carbon Materials",,,,,,2024,Sept.
"Sota Noriduki,Naoki Umada,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Detection of hydrogen desorption by sliding with steel from amorphous hydrogenated carbon film","34th International Conference on Diamond and Carbon Materials",,,,,,2024,Sept.
"Yusuke Kurosaki,Hiroki Akasaka,Naoto Ohtake,Yuki Hirata","Development of three-dimensional nano-coating technique for ta-C films with FCVA method","34th International Conference on Diamond and Carbon Materials",,,,,,2024,Sept.
"Yuto Tameno,Yuki Hirata,Takumi Ishikawa,Hiroki Akasaka,Naoto Ohtake,Hiroshige Matsuoka","Characterization of Structural and Mechanical Properties of DLC Films Deposited on the Surface of Minute-scale 3D Objects: Changes in the incident behavior of carbon ions",,"Surface and Coating Technology",,"  490",,,2024,Aug.
"平田 祐樹,吉井 寛太,赤坂 大樹,大竹 尚登","物理気相成長法によるhBNナノシートの合成及び機能開拓","日本機械学会中国四国支部 第62期総会・講演会",,,,,,2024,Mar.
"長谷 嘉琉,原田 大,青野 祐子,平田 祐樹,大竹 尚登,赤坂 大樹","光吸収特性の異なるアモルファス炭素膜のレーザ接合","第71回 応?物理学会 春季学術講演","第71回応用物理学会 春季学術講演会要旨集,",,,,,2024,Mar.
"為野悠人,平田 祐樹,石川 功,赤坂 大樹,大竹 尚登,松岡 広成","三次元形状物上に作製したDLC 膜の構造及び機械的特性評価","日本機械学会中国四国支部 第62期総会・講演会",,,,,,2024,Mar.
"藤本 隼汰,吉井 寛太,平田 祐樹,石川 功,赤坂 大樹,大竹 尚登,松岡 広成","グラフェンとBNシートのヘテロ構造の新規合成手法開発と特性評価","日本機械学会中国四国支部 第62期総会・講演会",,,,,,2024,Mar.
"Li Yucheng,Chiaki Koga,Yuki Hirata,Hiroki Akasaka,HIROYASU KANETAKA,NAOTO OHTAKE","Deposition and evaluation of antimicrobial properties of Cu/DLC multilayered films","2024年度精密工学会春季大会学術講演会",,,,,,2024,Mar.
"長谷嘉琉,原田大,青野祐子,平田祐樹,大竹尚登,赤坂大樹","大気下でのレーザー照射によるダイヤモンド状炭素膜の接合","2024年度精密工学会春季大会学術講演会",,,,,,2024,Mar.
"為野悠人,平田祐樹,石川功,赤坂大樹,大竹尚登,松岡広成","FCVA法によるta-C膜の三次元コーティング技術の開発","第37回ダイヤモンドシンポジウム",,,,,,2023,Nov.
"Yuki Hirata,Kanta Yoshii,Mikito Yoshizato,Hiroki Akasaka,Naoto Ohtake","Developing a Synthesis Process for Large-scale h-BN Nanosheets Using Magnetron Sputtering and Heat Annealing",,"Advanced Engineering Material",,"Vol. 25",,"  2300933",2023,Oct.
"玉井 大鷹,平田 祐樹,大竹 尚登,赤坂 大樹","ダイヤモンド状炭素コートA6063 パイプの圧力損失","2023年 第84回応用物理学会 秋季学術講演会","2023年 第84回応用物理学会 秋季学術講演会要旨集","応用物理学会",,,,2023,Sept.
"田中 大樹,平田 祐樹,大竹 尚登,赤坂 大樹","軽減素担持金属粒子からのコールドスプレーによる膜形成","第30回 機械材料・材料加工技術講演会(M&P2023)","第30回 機械材料・材料加工技術講演会(M&P2023)要旨集",,,,,2023,Sept.
"法月 奏太,平田 祐樹,大竹 尚登,赤坂 大樹","ダイヤモンド状炭素膜からの摺動による水素脱離量の推定","第30回 機械材料・材料加工技術講演会(M&P2023)",,,,,,2023,Sept.
"原田 大,長谷 嘉琉,青野 祐子,平田 祐樹,大竹 尚登,赤坂 大樹","ガラスとシリコン上に形成したアモルファス炭素膜のレーザー照射による接合","第30回 機械材料・材料加工技術講演会(M&P2023)",,,,,,2023,Sept.
"松尾 誠,山城 崇徳,平田 祐樹,田村 幸雄,山本 浩,小沢 俊夫,潘 剛毅,赤坂 大樹,大竹 尚登","軟質金属基材上へのダイヤモンド状炭素膜コーティングの試み",,"日本機械学会論文集",,"Vol. 89","No. 925","p. 23-00171(20 pages)",2023,Sept.
"小松原 理央,玉田 耕治,平田 祐樹,大竹 尚登,赤坂 大樹","ネオジウム磁石を用いたマグネトロンスパッタリング源からの アモルファス炭素膜の作製","2023年 第84回応用物理学会 秋季学術講演会","2023年 第84回応用物理学会 秋季学術講演会要旨集",,,,,2023,Sept.
"長谷 嘉琉,原田 大,青野 祐子,平田 祐樹,大竹 尚登,赤坂 大樹","パルスレーザー照射によるアモルファス炭素膜の接合","2023年 第84回応用物理学会 秋季学術講演会","2023年 第84回応用物理学会 秋季学術講演会要旨集",,,,,2023,Sept.
"馬田 直樹,青野 祐子,新部 正人,神田 一浩,平田 祐樹,大竹 尚登,赤坂 大樹","アモルファス炭素膜のsp2結合炭素配向性のレーザ照射による変化","2023年 第84回応用物理学会 秋季学術講演会","2023年 第84回応用物理学会 秋季学術講演会 要旨集",,,,,2023,Sept.
"中村心哉,加藤豊大,加納眞,田村幸雄,松本圭司,山本浩,平田祐樹,赤坂大樹,田中真二,菊池雅男,大竹尚登","傾斜面に作製したDLC膜の環境調和型油潤滑下の摩擦特性","2023年度精密工学会秋季大会学術講演会",,,,,,2023,Sept.
"Hayata Fujimoto,Yuki Hirata,Kanta Yoshii,Takumi Ishikawa,Hiroki Akasaka,Naoto Ohtake,Hiroshige Matsuoka","Synthesis of BCN-based nanosheets by SiC pyrolysis and magnetron sputtering methods","33rd International Conference on Diamond and Carbon Materials",,,,,,2023,Sept.
"Kasumi Tsutsumi,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Characterization of carbon-based nanomaterials precipitated on metal surface via thermal annealing process","33rd International Conference on Diamond and Carbon Materials",,,,,,2023,Sept.
"Yuki Hirata,Kanta Yoshii,Justyna Kulczyk-Malecka,Yagya Regmi,Akira Takahashi,Hiroki Akasaka,Naoto Ohtake","Magnetron sputter deposited hexagonal boron nitride nanosheets for use of proton exchange membrane fuel cells","33rd International Conference on Diamond and Carbon Materials",,,,,,2023,Sept.
"Yuto Tameno,Yuki Hirata,Takumi Ishikawa,Takeharu Motokawa,Noriko IIda,Hiroki Akasaka,Naoto Ohtake,Hiroshige Matsuoka","Effect of the incident behavior of carbon ions on the film properties deposited on the three-dimensional object by FCVA method","33rd International Conference on Diamond and Carbon Materials",,,,,,2023,Sept.
"藤本隼汰,吉井寛太,平田祐樹,石川功,赤坂大樹,大竹尚登,松岡広成","真空加熱処理によるBCN系ナノシートの新規合成手法の開発","トライボロジー会議2023 春 東京",,,,,,2023,May
"為野悠人,平田祐樹,石川功,赤坂大樹,大竹尚登,松岡広成","FCVA 法による ta-C 膜の3Dコーティン グ（炭素イオンの入射挙動が膜に及ぼす影響評価）","トライボロジー会議2023 春 東京",,,,,,2023,May
"Yucheng Li,Chiaki Koga,Yuki Hirata,Hiroki Akasaka,Hiroyasu Kanetaka,Naoto Ohtake","Evaluation of mechanical and antibacterial properties of Cu-DLC composite films",,"Mechanical Engineering Journal",,"Vol. 10","Issue 4","p. 23-00088(11 pages)",2023,May
"Takeshi Konno,Toyohiro Kato,Toshiaki Yanagida,Hiroshi Inaba,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Characterization of carburized layer on low-alloy steel fabricated by hydrogen-free carburizing process using carbon ions",,"Diamond and Related Materials","Elsevier",,,"pp. 109816",2023,Mar.
"Yuki Hirata,Kotaro Kawai,Toyohiro Kato,Hayata Fujimoto,Yuto Tameno,Takumi Ishikawa,Hiroshige Matsuoka,Hiroki Akasaka,Naoto Ohtake","Characterization of structural and mechanical properties of DLC films deposited on the surface of minute-scale 3D objects: Comparison of PECVD and FCVA deposition technique",,"Surface and Coatings Technology","Elsevier",,,"pp. 129401",2023,Mar.
"法月 奏太,平田 祐樹,大竹 尚登,赤坂 大樹","重水素湿度下での水素化アモルファス炭素膜の摺動による反応検出","2023年 第70回応用物理学会 春季学術講演会","2023年 第70回応用物理学会 春季学術講演会要旨集",,,,,2023,Mar.
"吉井寛太,吉里樹人,平田祐樹,赤坂大樹,大竹尚登","マグネトロンスパッタリングを用いたhBNナノシートの合成及び構造評価","2023年度精密工学会春季大会学術講演会",,,,,,2023,Mar.
"Sota Norizuki,Sarayut Tunmee,Chanan Euaruksakul,Ukit Rittihong,Keisuke Suzuki,Masashi Tomidokoro,Hideki Nakajima,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","X-ray photoemission electron microscopy observation of wear tracks on hydrogenated amorphous carbon films after ball-on-disk tests",,"Diamond and Related Materials","Elsevier","Vol. 132",,"pp. 109682",2023,Jan.
"Yuki Hirata,Kanta Yoshii,Mikito Yoshizato,Hiroki Akasaka,Naoto Ohtake","Structural Analysis of Few-Atomic Layered Hexagonal Boron Nitride Nanosheets Synthesized with Magnetron Sputtering and Heat Annealing Process","Pacific Rim Symposium on Surfaces, Coatings and Interfaces 2022","Abstracts of Pacific Rim Symposium on Surfaces, Coatings and Interfaces 2022",,,,,2022,Dec.
"Yucheng Li,Chiaki Koga,Yuki Hirata,Hiroki Akasaka,Hiroyasu Kanetaka,Naoto Ohtake","Evaluation of Mechanical and Antibacterial Properties of Cu‐DLC Composite Films","International Conference on Materials & Processing 2022","Abstract of International Conference on Materials & Processing 2022",,,,,2022,Nov.
"Naoki Umada,Kazuhiro Kanda,Masato Niibe,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Oriented sp2 bonded carbon structure of hydrogenated amorphous carbon films",,"Diamond & Related Materials","Elsevier","Vol. 131",,"pp. 109533",2022,Nov.
"Dai Harada,Sarayut Tunmee,Chanan Euaruksakul,Ukit Rittihong,Hideki Nakajima,Yuko Aono,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Investigation of the structure and tribological properties of laser-irradiated hydrogenated amorphous carbon films",,"Diamond and Related Materials",,"Vol. 131",,"pp. 109573",2022,Nov.
"Daiki Tanaka,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Hardening of metal films deposited by cold spray using light elemental diffusion","International Conference on Materials & Processing 2022","Abstract of International Conference on Materials & Processing 2022",,,,,2022,Nov.
"Ye Htet Lin,Preechar Karin,Patcharee Larpsuriyakul,Naoto Ohtake","Physicomechanical Characteristics of Carbon Fiber Reinforced Polymer Composite Using X-Ray Diffraction, Atomic Force and Electron Microscopies",,"International Journal of Automotive Technology","The Korean Society of Automotive Engineers","Vol. 23","Issue 5","pp. 1349-1363",2022,Oct.
"Yuki Hirata,Kotaro Kawai,Toyohiro Kato,Hayata Fujimoto,Yuto Tameno,Takumi Ishikawa,Hiroshige Matsuoka,Hiroki Akasaka,Naoto Ohtake","Comparative study on the film properties of 3-dimensional ta-C films prepared by CVD and FCVA coating processes","32nd International Conference on Diamond and Carbon Materials",,,,,,2022,Sept.
"法月 奏太,平田 祐樹,大竹 尚登,赤坂 大樹","水素化アモルファス炭素膜の摺動中の逐次評価","2022年第83回応用物理学会秋季学術講演会","応用物理学会第83回秋季講演会要旨集",,,,,2022,Sept.
"原田 大,Tunmee Sarayut,青野 祐子,Euaruksakunl Chanan,Rittihong Ukit,平田 祐樹,大竹 尚登,赤坂 大樹","パルスレーザ照射による アモルファス炭素膜の形状変化","2022年第83回応用物理学会秋季学術講演会","応用物理学会第83回秋季講演会要旨集",,,,,2022,Sept.
"Yuki Hirata,Kanta Yoshii,Mikito Yoshizato,Hiroki Akasaka,Naoto Ohtake","Synthesis of hexagonal boron nitride nanosheets structure with magnetron sputtering and thermal annealing process","32nd International Conference on Diamond and Carbon Materials",,,,,,2022,Sept.
"Takeshi Konno,Toyohiro Kato,Toshiaki Yanagida,Hiroshi Inaba,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Development of hydrogen-free carburizing process using carbon ions","32nd International Conference on Diamond and Carbon Materials",,,,,,2022,Sept.
"Yuto Tameno,Takumi Ishikawa,Toyohiro Kato,Kotaro Kawai,Hiroki Akasaka,Yuki Hirata,Naoto Ohtake,Hiroshige Matsuoka","3D coating of ta-C films using FCVA method (The mechaincal properties of ta-C films deposited on the sidewall)","2022 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment",,,,,,2022,Aug.
"Hayata Fujimoto,Takumi Ishikawa,Kotaro Kawai,Toyohiro Kato,Hiroki Akasaka,Yuki Hirata,Naoto Ohtake,Hiroshige Matsuoka","Study on the surface properties of ta-C films deposited by FCVA method on the trench-shaped target","2022 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment",,,,,,2022,Aug.
"Dai Harada,Sarayut Tunmee,Yuko Aono,Chanan Euaruksakunl,Ukit Rittihong,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Sliding properties of laser irradiated amorphous carbon film","15th International Conference on New Diamond and Nano Carbons (NDNC2022)","Abstract of 15th International Conference on New Diamond and Nano Carbons (NDNC2022)",,,,"pp. 184",2022,June
"Sota Norizuki,Keisuke Suzuki,Sarayut Tunmee,Ukit Rittihong,Chanan Euaruksakul,Ratchadaporn Supruangnet,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","X-ray photoemission electron microscopy observation of sliding marks on amorphous carbon fi lm after ball on test","15th International Conference on New Diamond and Nano Carbons (NDNC2022)","Abstract of 15th International Conference on New Diamond and Nano Carbons (NDNC2022)",,,,"pp. 148",2022,June
"Yucheng Li,Chiaki Koga,Yuki Hirata,Hiroki Akasaka,Hiroyasu Kanetaka,Naoto Ohtake","Evaluation of antibacterial properties of DLC/Cu composite films","15th International Conference on New Diamond and Nano Carbons (NDNC2022)","Abstract of 15th International Conference on New Diamond and Nano Carbons (NDNC2022)",,,,"pp. 185",2022,June
"Naoki Umada,Kazuhiro Kanda,Masato Niibe,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Detection of oriented sp2 hybridized carbon structure in amorphous carbon film","15th International Conference on New Diamond and Nano Carbons (NDNC2022)","Abstract of 15th International Conference on New Diamond and Nano Carbons (NDNC2022)",,,,"pp. 185",2022,June
"為野悠人,石川功,加藤豊大,川合功太郎,赤坂大樹,平田祐樹,大竹尚登,松岡広成","FCVA法によるta-C膜の3Dコーティング（側面に形成される膜の機械的特性評価）","トライボロジー会議2022 春 東京",,,,,,2022,May
"藤本 隼汰,石川 功,川合 功太郎,加藤 豊大,赤坂 大樹,平田 祐樹,大竹 尚登,松岡 広成","FCVA法により三次元構造物へコーティングされたta-C 膜の表面特性評価","日本機械学会 中国四国学生会 第52回学生員卒業研究発表講演会",,,,,,2022,Mar.
"神田 一浩,新部 正人,馬田 直樹,平田 祐樹,大竹 尚登,赤坂 大樹","アモルファス炭素膜中のsp2結合炭素の秩序","応用物理学会第69回春季講演会","応用物理学会第69回春季講演会要綱集",,,,,2022,Mar.
"原田 大,Tunmee Sarayut,青野 祐子,Euaruksakun Chanan,Rittihong Ukit,平田 祐樹,大竹 尚登,赤坂 大樹","アモルファス炭素膜へのレーザ照射による構造制御を用いた摺動性向上","応用物理学会第69回春季講演会","応用物理学会第69回春季講演会要旨集",,,,,2022,Mar.
"法月 奏太,Tunmee Sarayut,Euaruksakun Chanan,Rittihong Ukit,鈴木 啓介,冨所 優志,平田 祐樹,大竹 尚登,赤坂 大樹","摺動試験前後のダイヤモンド状炭素膜表面の構造評価","応用物理学会第69回春季講演会","応用物理学会第69回春季講演会要旨集",,,,,2022,Mar.
"神田 一浩,新部 正人,馬田 直樹,平田 祐樹,大竹 尚登,赤坂 大樹","ダイヤモンド状炭素膜中の配向性sp2微小構造の検出","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会要旨集",,,,,2022,Mar.
"為野 悠人,石川 功,加藤 豊大,川合 功太郎,赤坂 大樹,平田 祐樹,大竹 尚登,松岡 広成","FCVA法により三次元構造物へコーティングされたta-C 膜の硬さ評価","日本機械学会 中国四国学生会 第52回学生員卒業研究発表講演会",,,,,,2022,Mar.
"柳田敏輝,金野雄志,加藤豊大,稲葉宏,赤坂大樹,平田祐樹,大竹尚登","炭素イオンを用いた水素フリー浸炭焼入れ技術の開発","2022年度精密工学会春季大会学術講演会 第29回学?会員卒業研究発表講演会","2022年度精密工学会春季大会学術講演会要綱集",,,,,2022,Mar.
"吉井 寛太,平田 祐樹,赤坂大樹,大竹 尚登","PVD法により作製したBCN膜の構造及び耐熱性評価","2022年度精密工学会春季大会学術講演会 第29回学?会員卒業研究発表講演会","2022年度精密工学会春季大会学術講演会要綱集",,,,,2022,Mar.
"古賀 千晶,李 裕程,平田 祐樹,赤坂 大樹,金? 弘恭,大竹 尚登","銅含有DLC膜による抗菌性メカニカルコーティングの開発","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会要綱集",,,,,2022,Mar.
"高橋 類,吉岡 侑利,平田 祐樹,大竹 尚登,赤坂 大樹","ハイドロキシアパタイト含有チタン基複合材料膜のアパタイト析出能評価","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会要綱集",,,,,2022,Mar.
"平田 祐樹,川合 功太郎,加藤 豊大,藤本 隼汰,為野 悠人,石川 功,松岡 広成,赤坂 大樹,大竹 尚登","FCVA 法によるta-C 膜の3 次元成膜および特性評価","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会要綱集",,,,,2022,Mar.
"吉岡 侑利,田中 大樹,平田 祐樹,大竹  尚登,赤坂 大樹","表面に金属層を形成したセラミックス粒子を用いた低圧コールドスプレー法による 金属基セラミックス複合材料膜の作製","2022年度精密工学会春季大会学術講演会","2022年度精密工学会春季大会学術講演会要旨集",,,,,2022,Mar.
"Yoshinao Iwamoto,Yuki Hirata,Ryouta Takamura,Hiroki Akasaka,NAOTO OHTAKE","Deposition phenomena of diamond-like carbon coating on inner surface of circular metal tube by nanopulse plasma chemical vapor deposition",,"Diamond & Related Materials",,"Vol. 121",,,2022,Jan.
"李裕程,榎本隼,平田祐樹,赤坂大樹,大竹尚登","焼付きを防止したダイヤモンド状炭素膜コーティング",,"セラミックデータブック 2022/23",,"  50","  130",,2022,
"Jongbeom CHOI,沖村 奈南,山田 貴壽,平田 祐樹,大竹 尚登,赤坂 大樹","グラフェンを成長させたCu粒子からのコールドスプレー法による グラフェン-銅複合材料コーティングの形成","日本機械学会第29回機械材料・材料加工技術講演会（M&P2021）","日本機械学会第29回機械材料・材料加工技術講演会講演要旨集",,,,,2021,Nov.
"堤香澄,平田祐樹,赤坂大樹,大竹尚登","FCVA法を用いた金属基板上へのグラフェン合成法の開発","第35回ダイヤモンドシンポジウム",,,,,,2021,Nov.
"金野雄志,加藤豊大,稲葉宏,平田祐樹,赤坂大樹,大竹尚登","炭素イオン流を用いた水素フリー浸炭技術の開発","第35回ダイヤモンドシンポジウム",,,,,,2021,Nov.
"Yoshinao Iwamoto,Yuki Hirata,Masaaki Nakagawa,Ryota Takamura,Hiroki Akasaka,Naoto Ohtake","Deposition phenomena investigation of DLC films on inner walls of circular metal tubes by nanopulse plasma CVD","The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","Abstract of The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","NDNC2020 COMMITTEE",,,"  7A-19",2021,June
"NAOTO OHTAKE","Classification of Carbon Films","The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","Abstract of The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","NDNC2020 COMMITTEE",,,"  II-02-1",2021,June
"M. Matsuo,T. Osawa,Y. Iwamoto,Y. Eyama,H. Yamamoto,S. Tanaka,Yuki Hirata,H. Akasaka,N. Ohtake","Wear Resistance Improvement of Stainless Steel Plate by Textured-DLC Coatings","The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","Abstract of The 14th International Conference on New Diamond and Nano Carbons (NDNC2020/2021)","NDNC2020 COMMITTEE",,,"  8A-28",2021,June
"Tial Cuai Man,Preechar Karin,Ye Htet Lin,Patcharee Larpsuriyakul,Naoto Ohtake","A study on curing temperature and fracture mechanism of carbon and glass fiber reinforced polymers using an electron microscopy",,"International Journal of Automotive Technology","The Korean Society of Automotive Engineers","Vol. 22","Issue 3","pp. 687-700",2021,June
"大竹尚登","軟質金属材料へのDLCコーティング適用",,"溶射技術","日本溶射学会","Vol. 41","No. 1","pp. 36-40",2021,June
"中山 亘,Jongbeom Choi,平田 祐樹,大竹 尚登,赤坂 大樹","低圧コールドスプレー法で堆積した鉄-CNT複合材料膜中の元素拡散","一般社団法人 日本溶射学会 第113回（2021年度春季）全国講演大会","一般社団法人 日本溶射学会 第113回 全国講演大会講演論文集",,,,,2021,June
"Shahira Liza. Kamis,Hiroki Akasaka,Naoto Ohtake","Evaluation Protein-Surface Interaction of Diamond-like Carbon (DLC) Film","International Conference on New Diamond and Nano Carbons 2020/2021","Abst. book :International Conference on New Diamond and Nano Carbons 2020/2021",,,,,2021,June
"Masashi Tomidokoro,Sarayut Tunmee,Ukit Rittihong,Chanan Euaruksakul,Ratchadaporn Supruangnet,Hideki Nakajima,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Electrical Conduction Properties of Hydrogenated Amorphous Carbon Films with Different Structures",,"Materials",,"Vol. 14","Issue 2355","pp. 1-11",2021,May
"P Kansuwan,R Khosakul,N Ohtake,P Wila,N Tosangthum,B Vetayanugul,R Tongsri","Sintered 316L/Cu/h-BN composites",,"IOP Conference Series: Materials Science and Engineering","IOP Publishing","Vol. 1137","Issue 1","pp. 012036",2021,May
"Tiwat Kaewkam,Panya Kansuwan,Naoto Ohtake,Pongsak Wila,Rungtip Krataithong,Nattaya Tosangthum,Thanyaporn Yotkaew,Ruangdaj Tongsri","Sintered Fe-Ni-Si-C alloys",,"IOP Conference Series: Materials Science and Engineering","IOP Publishing","Vol. 1137","Issue 1","pp. 012035",2021,May
"AN Soe,P Wila,M Morakotjinda,T Yotkaew,P Karin,N Ohtake,R Tongsri","Sintered Fe-Cr-Mo-Si-C alloys produced from pre-alloyed Fe-Cr based powders admixed with 4% SiC for high performance applications","IOP Conference Series: Materials Science and Engineering","IOP Conference Series: Materials Science and Engineering","IOP Publishing","Vol. 1137","Issue 1","pp. 012027",2021,May
"Thunyamon Nithimethakul,Preechar Karin,Naoto Ohtake,Pongsak Wila,Thanyaporn Yodkaew,Bhanu Vetayanugul,Monnapas Morakotjinda,Ruangdaj Tongsri","The effect of molybdenum on the microstructure and mechanical behaviour of the sintered Fe-Mo-Mn-Si-C composite","IOP Conference Series: Materials Science and Engineering","IOP Conference Series: Materials Science and Engineering","IOP Publishing","Vol. 1137","Issue 1","pp. 012028",2021,May
"大竹尚登","特集 金属材料とダイヤモンドライクカーボン(DLC)特集にあたって",,"金属","アグネ技術センター","Vol. 91","No. 5","pp. 3",2021,May
"Jongbeom Choi,Nana Okimura,Takatoshi Yamada,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Deposition of graphene?copper composite film by cold spray from particles with graphene grown on copper particles",,"Diamond and Related Materials","Elsevier","Vol. 116",,"pp. 108384",2021,Apr.
"Yucheng Li,Jun Enomoto,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Synthesis of Multilayered DLC Films with Wear Resistance and Antiseizure Properties",,"Materials","MDPI","Vol. 14","No. 2300","  1-18",2021,Apr.
"李 裕程,榎本 隼,平田 祐樹,赤坂 大樹,大竹 尚登","耐摩耗性と焼付防止機能を有するDLC多層膜の開発","2021年度精密工学会春季大会学術講演会","2021年度精密工学会春季大会学術講演会要綱集",,,,,2021,Mar.
"吉岡 侑利,CHOI Jongbeom,中山 亘,平田 祐樹,大竹 尚登,赤坂 大樹","塑性変形層の厚さがコールドスプレー法による膜形成時の付着効率に及ぼす影響","2021年度精密工学会春季大会学術講演会","2021年度精密工学会春季大会学術講演会要綱集",,,,,2021,Mar.
"Yuki Hirata,Ryotaro Takeuchi,Hiroyuki Taniguchi,Masao Kawagoe,Yoshinao Iwamoto,Mikito Yoshizato,Hiroki Akasaka,NAOTO OHTAKE","Structural and Mechanical Properties of a-BCN Films prepared by Arc-Sputtering Hybrid Process",,"Materials",,"vol. 14","  2300","  1-18",2021,Feb.
"吉里樹人,平田祐樹,赤坂大樹,大竹尚登","ダイナミックアニーリングプロセスによるh-BNナノシート合成手法の開発","第34回ダイヤモンドシンポジウム","第34回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 74-75",2021,Jan.
"Naoto Ohtake,Masanori Hiratsuka,Kazuhiro Kanda,Hiroki Akasaka,Masanori Tsujioka,Kenji Hirakuri,Atsushi Hirata,Tsuguyori Ohana,Hiroshi Inaba,Makoto Kano,Hidetoshi Saitoh","Properties and Classification of Diamond-Like Carbon Films",,"Materials",,"Volume 14","Issue 315","pp. 1-26",2021,Jan.
"川合功太郎,平田祐樹,赤坂大樹,大竹尚登","FCVA法による三次元構造物へのta-C極薄膜コーティング","第34回ダイヤモンドシンポジウム","第34回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 54-55",2021,Jan.
"山城崇徳,松尾誠,田村幸雄,山本浩,平田祐樹,赤坂大樹,田中真二,菊池雅男,大竹尚登","軟質金属材料へのDLCコーティングを用いた高機能摺動表面の提案","第34回ダイヤモンドシンポジウム","第34回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 52-53",2021,Jan.
"A.N. Soe,P. Wila,M. Morakotjinda,T. Yotkaew,P. Karin,N. Ohtake,R. Tongsri","Sintered Fe-Cr-Mo-Si-C alloys produced from pre-alloyed Fe-Cr based powders admixed with 4% SiC for high performance applications","The11th International Conference on Mechanical Engineering (TSME-ICOME 2020)","IOP Publishing","TSME-ICoME 2020 Committee",,,,2020,Dec.
"Jongbeom Choi,Nana Okimura,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Fabrication of metal-carbon composite coating using cold spray technique","The 5th International Conference on Smart Materials and Nanotechnology (SmartMat@2020)",,,,,,2020,Dec.
"Jongbeom Choi,Wataru Nakayama,Nana Okimura,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Deposition of High-Density Carbon Nanotube-Containing Nickel-Based Composite Films by Low-Pressure Cold Spray",,"Journal of Thermal Spray Technology","Springer","Vol. 29",,"pp. 1902",2020,Nov.
"Jongbeom Choi,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Deposition of polymer composite by low pressurized cold spray","18th International Conference on Precision Engineering; ICPE2020","Abst. book of The 18th International Conference on Precision Engineering",,,,,2020,Nov.
"中山 亘,CHOI Jongbeom,平田 祐樹,大竹 尚登,赤坂 大樹","低圧コールドスプレー法で堆積させた鉄-CNT複合材料膜への熱処理","日本溶射学会 第112回（2020年度秋季）全国講演大会",,"日本溶射学会 第112回（2020年度秋季）全国講演大会要旨集",,,,2020,Oct.
"Ekkarat CHUSONG,Panya KANSUWAN,Naoto OHTAKE,Pongsak WILA,Nattaya TOSANGTHUM,Ruangdaj TONGSRI","Dry-sliding wear of the 316L/h-BN composites produced under crack ammonia atmosphere",,"Journal of Metals, Materials and Minerals","Journal of Metals, Materials and Minerals","Vol. 30","No. 2","pp. 117-123",2020,Sept.
"Nana Okimura,Jongbeom Choi,Wataru Nakayama,Nobuhisa Ata,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Metal Matrix Composites Using Diamond-like Carbon-Coated Particles Fabricated by Cold Spray Technique",,"Journal of Thermal Spray Technology","Springer Nature","Vol. 29",,"pp. 1660?1668",2020,Aug.
"Yukio Tamura,Kazutaka Kobayashi,Kenichiro Aratani,Shinji Tanaka,Masao Kikuchi,Masabumi Masuko,Naoto Ohtake","Influence of Wear Surface Morphology and Phosphorus-Containing Tribofilm on Crack Initiation of Manganese Phosphate Coated Steel under Rolling?Sliding Contact",,"Tribology Online","Japanese Society of Tribologists","Vol. 15","No. 3","pp. 154-169",2020,June
"大竹尚登","ダスト含有油潤滑下におけるテクスチャ構造ダイヤモンド状炭素膜のトライボロジー特性",,"トライボロジスト","株式会社新樹社","Vol. 65","No. 5","pp. 12-17",2020,May
"田村 幸雄,松本 圭司,石原 聡仁,青木才子,田中真二,菊池雅男,益 子正文,大竹尚登","転がり-すべり条件下で完全配合油により潤滑されたリン酸マンガン皮膜処理鋼におけるトライボフィルム生成と摩耗","トライボロジー会議2020 春 東京",,"日本トライボロジー学会",,,,2020,May
"Ukit Rittihong,Hiroki Akasaka,Chanan Euaruksakul,Masashi Tomidokoro,Nuntaporn Kamonsuttipaijit,Hideki Nakajima,Ratchadaporn Supruangnet,Catleya Rojviriya,Artit Chingsungnoen,Phitsanu Poolcharuansin,Naoto Ohtake,Sarayut Tunmee","Synchrotron-based spectroscopic analysis of diamond-like carbon films from different source",,"Radiation Physics and Chemistry","Elsevier","Vol. 173",,"pp. 108944",2020,Apr.
"大竹尚登","心を豊かにする書籍たち?若手研究者に贈る宝物?",,"金属","アグネ技術センター","Vol. 90","No. 4","pp. 18-19",2020,Apr.
"法月 奏太,Sarayut Tunmee,Chanan Euaruksakun,Ukit Rittihong,富所 優志,Ratchadaporn Supruangnet,平田 祐樹,大竹 尚登,赤坂 大樹","X 線光電子顕微鏡を用いたDLC 膜の摺動痕の観察","2020年第67回応用物理学会春季学術講演会","2020年第67回応用物理学会春季学術講演会",,,,,2020,Mar.
"Choi Jongbeom,Wataru Nakayama,Nana Okimura,Takuya Hotchi,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Deposition of electroless Ni plated CNT in high-density by cold spray technique","CIAiS International Symposium 2020","Abst book of CIAiS International Symposium 2020",,,,,2020,Feb.
"大竹尚登","平成の新材料を振り返る ?精密工学の発展を支える材料開発の軌跡?","平成の新材料を振り返る ?精密工学の発展を支える材料開発の軌跡?","精密工学会誌 = Journal of the Japan Society of Precision Engineering","精密工学会","Vol. 86","No. 1","pp. 18-22",2020,Jan.
"Takuya Osawa,Makoto Matsuo,Yuya Eyama,Hiroshi Yamamoto,Shinji Tanaka,Masao Kikuchi,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Using Textured-DLC Coating to Improve theWear Resistance of Stainless Steel Plate Under Dust-Containing Lubricant Condition",,"International Journal of Automation Technology","富士技術出版株式会社","Vol. 14","No. 1","pp. 99-108",2020,Jan.
"G. Fern?ndez Zapico,Naoto Ohtake,Hiroki Akasaka,J.M.Munoz-Guijosa","Epoxy toughening through high pressure and shear rate preprocessing",,"Scientific Reports","Springer Nature","  17343",,"pp. 1-9",2019,Nov.
"大竹尚登","DLC成膜技術と工業的応用",,"日刊工業新聞","日刊工業新聞社",,"No. 23255",,2019,Nov.
"榎本隼,平田祐樹,赤坂大樹,大竹尚登","オニオンライクDLCコーティングの開発","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 30-31",2019,Nov.
"竹内亮大郎,岩本喜直,河越雅雄,谷口紘章,平田祐樹,赤坂大樹,大竹尚登","アーク蒸着とマグネトロンスパッタリングを重畳した気相成長法により作製したα-BCN膜の評価","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 34-35",2019,Nov.
"大澤卓也,松尾誠,江山雄哉,山本浩,田中真二,菊池雅男,平田祐樹,赤坂大樹,大竹尚登","軟質金属材料へのDLCコーティングの応用","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 36-37",2019,Nov.
"赤坂 大樹,Tunmee Sarayut,Rittihong Ukit,富所 優志,Euaruksakul Chanan*2,Supruangnet Ratchadaporn,Nakajima Hideki,法月 奏太,平田 祐樹,大竹 尚登","X線光電子顕微鏡を用いたDLC膜の損傷解析","日本機械学会第27回機械材料・材料加工技術講演会","日本機械学会第27回機械材料・材料加工技術講演会講演要旨集",,,,,2019,Nov.
"崔   鐘範,沖村 奈南,中山 亘,發知 卓也,平田 祐樹,大竹 尚登,赤坂 大樹","コールドスプレー法を用いた機能性複合材料厚膜の高速形成","日本機械学会第27回機械材料・材料加工技術講演会（M&P2019）","日本機械学会第27回機械材料・材料加工技術講演会要旨集",,,,,2019,Nov.
"崔 鐘範,中山 亘,沖村奈南,上塚 洋,大谷亮太,發知卓也,平田祐樹,大竹尚登,赤坂大樹","金属被覆ダイヤモンドからの金属基複合材料膜の作製","第33回ダイヤモンドシンポジウム講演","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"發知卓也,Choi Jongbeom,沖村奈南,中山 亘,平田祐樹,大竹尚登,赤坂大樹","エンジニアリングプラスチック基カーボンナノチューブ複合材料膜のコールドスプレー法による作製","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"中山 亘,沖村奈南,崔 鐘範,發知卓也,平田祐樹,大竹尚登,赤坂大樹","コールドスプレー法によるCNT含有鉄複合材料膜の高速合成","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"Shahira Liza Binti Kamis,Hiroki Akasaka,Naoto Ohtake","Characterization of adsorbed protein on post wear test of ta-C and a-C:H contact surfaces","33th Diamond Symposium Program","Abst book of 33th Diamond Symposium Program",,,,,2019,Nov.
"沖村奈南,崔 鐘範,中山 亘,阿多誠久,平田祐樹,大竹尚登,赤坂大樹","DLCを金属中に包埋した複合材料厚膜の作製","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"法月奏太,Tunmee Sarayut,Euaruksakun Chanan,Rittihong Ukit,鈴木啓介,冨所優志,平田祐樹,大竹尚登,赤坂大樹","ボールオンディスク試験後のDLC表面の摺動痕の構造評価","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"冨所優志,Tunmee Sarayut,Nakajima Hideki,Rittihong Ukit,Supruangnet Ratchadaporn,平田祐樹,大竹尚登,赤坂大樹","水素化アモルファス炭素膜の水素量と電気伝導特性の相関","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集",,,,,2019,Nov.
"Hiroki Akasaka,Sarayut Tunmee,Ukit Rittihong,Masashi Tomidokoro,Chanan Euaruksakul,Souta Norizuki,Ratchadaporn Supruangnet,Hideki Nakajima,Yuki Hirata,Naoto Ohtake","Thermal decomposition and structural variation by heating on hydrogenated amorphous carbon films",,"Diamond and Related Materials","Elsevier","Vol. 101",,"pp. 10609",2019,Nov.
"吉里樹人,平田祐樹,赤坂大樹,大竹尚登","物理気相成長法による銅基板上への六方晶窒化ホウ素薄膜の合成","第33回ダイヤモンドシンポジウム","第33回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 88-89",2019,Nov.
"Nana Okimura,Choi Jongbeom,Nobuhisa Ata,Wataru Nakayama,Takatoshi Yamada,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Nano carbon contained composite film fabricated by cold spray technique","The 11th annual Recent Progress in Graphene and Two-dimensional Materials Research Conference (RPGR2019)",,,,,,2019,Oct.
"Jongbeom Choi,Nana Okimura,Nobuhisa Ata,Wataru Nakayama,Takatoshi Yamada,Naoto Ohtake,Hiroki Akasaka","Fabrication of Graphene ? Copper composite films by Cold Spray Technique","The 11th annual Recent Progress in Graphene and Two-dimensional Materials Research Conference (RPGR2019)",,,,,,2019,Oct.
"大竹尚登","会長就任にあたって",,"NEW DIAMOND","一般社団法人ニューダイヤモンドフォーラム",,"No. 135",,2019,Oct.
"Yoshinao Iwamoto,Keitaro Takenami,Ryota Takamura,Masaki Inoue,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Preparation of DLC films on inner surfaces of metal tubes by nanopulse plasma CVD",,"Surface & Coatings Technology","Elsevier",,"No. 380",,2019,Oct.
"Jongbeom Choi,nana okimura,wataru nakayama,yuki hirata,naoto ohtake,hiroki akasaka","Fabrication of composite film from Cu coated Al particles using low pressure cold spray technique","JSAP Autumn Meeting 2019",,,,,,2019,Sept.
"Hiroki Akasaka,Keisuke Suzuki,Sarayut Tunmee,Chanan Euaruksakul,Ukit Rittihong,Ratchadaporn Supruangnet,Yuki Hirata,Naoto Ohtake","X-PEEM observation of sliding mark on the amorphous carbon film surface after ball on disk test.","30th International Conference on Diamond and Carbon Materials",,,,,,2019,Sept.
"Yuki Hirata,Ryotaro Takeuchi,Hiroyuki Taniguchi,Yoshinao Iwamoto,Masao Kawagoe,Hiroki Akasaka,Naoto Ohtake","Synthesis of a-BCN Films and Characterization of Their Mechanical Properties","30th International Conference on Diamond and Carbon Materials",,,,,,2019,Sept.
"冨所 優志,Tunmee Sarayut,Nakajima Hideki,Rittihong Ukit,Supruangnet Ratchadaporn,平田 祐樹,大竹 尚登,赤坂 大樹","水素化アモルファス炭素膜の構造と電気伝導特性の関係","応用物理学会秋季学術講演会",,,,,,2019,Sept.
"中山 亘,沖村 奈南,Choi Jongbeom,平田 祐樹,大竹 尚登,赤坂 大樹","混合粉体からの低圧コールドスプレー法によるCNT-鉄 膜の作製","第80回応用物理学会秋季学術講演会",,,,,,2019,Sept.
"Yukio Tamura,Kazutaka Kobayashi,Kenichiro Aratani,Keiji Matsumoto,Shin Yoshida,Shinji Tanaka,Masao Kikuchi,Masabumi Masuko,Naoto Ohtake","Wear Beahvior of a Manganese Phosphate Coating/Case Carburized Steel Pair","ITC Sendai 2019",,,,,,2019,Sept.
"沖村 奈南,阿多 誠久,Choi Jongbeom,中山 亘,平田 祐樹,大竹 尚登,赤坂 大樹","DLCを担持させたCu粒子からのCu-DLC複合材料厚膜 の作製","第80回応用物理学会秋季学術講演会",,,,,,2019,Sept.
"Hiroki Akasaka,Keisuke Suzuki,Norizuki Sota,Sarayut Tunmee,Chanan  Euaruksakul,Ukit Rittihong,Ratchadaporn Supruangnet,Yuki Hirata,Naoto Ohtake","NEXAFS and X-PEEM observation of the damaged area  on the amorphous carbon film surface","the Asian Conference on X-ray Absorption Spectroscopy (ACXAS2019)",,,,,,2019,Aug.
"Yuki Hirata,Mikito Yoshizato,Hiroki Akasaka,Naoto Ohtake","Physical Vapor Deposition Growth of Few-Atomic LayeredHexagonal Boron Nitride Nanosheets","The 2nd Asian Pacific Symposium on Technology of Plasticity(APSTP2019)","Agenda of APSTP 2019 & AWMFT2019",,,,,2019,July
"Ryotaro Takeuchi,Yoshinao Iwamoto,Masao Kawagoe,Hiroyuki Taniguchi,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Evaluation of Structure and Mechanical Properties of a-BCN Films Deposited by PVD","The 2nd Asian Pacific Symposium on Technology of Plasticity(APSTP2019)","Agenda of APSTP 2019 & AWMFT2019",,,,,2019,July
"Yuki Hirata,Keitaro Takenami,Ryouta Takamura,Yoshinao Iwamoto,Hiroki Akasaka,Naoto Ohtake","Deposition of a-C:H Film on Inner Surface of the Tube by Nanopulse Plasma CVD and Analysis of Plasma Behavior","3rd International Conference on Applied Surface Science",,,,,,2019,June
"Mikito Yoshizato,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","Synthesis of High-Crystalline Hexagonal Boron Nitride Nanosheets on Cu Foil Using Physical Vapor Deposition","3rd International Conference on Applied Surface Science",,,,,,2019,June
"Kouta WAKUI,Naoto OHTAKE","Joining of CFRTP and aluminum alloy thin plates using ultrasonic vibrations",,"Mechanical Engineering Journal","The Japan Society of Mechanical Engineers","Vol. 6","No. 3","pp. 19-00046",2019,June
"Hiroki Akasaka,Sarayut Tunmee,Chanan  Euaruksakun,Ukit Rittihong,Ratchadaporn Supruangnet,Yuki Hirata,Naoto Ohtak","Decomposition and their structural change by heating  on amorphous carbon films","The 13th New Diamond and Nano Carbon Conference(NDNC 2019)",,,,,,2019,May
"Nana Okimura,Nobuhisa Ata,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Metal matrix composites using surface modified particles  fabricated by cold spray technique","INTERNATIONAL THERMAL SPRAY CONFERENCE AND EXPOSITION ITSC2019",,,,,,2019,May
"Masashi Tomidokoro,Tunmee Sarayut,Nakajima Hideki,Rittihong Ukit,Supruangnet Ratchadaporn,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Relationship between structure and electrical conduction properties in hydrogenated amorphous carbon films","13th International New Diamond and Nano Carbon conference (NDNC2019)",,,,,,2019,May
"大澤卓也,江山雄哉,松尾 誠,山本 浩,田中真二,菊池雅男,平田祐樹,赤坂大樹,大竹尚登","過酷環境下における耐摩耗性向上のための表面デザイン","2019年度精密工学会春季大会","2019年度精密工学会春季大会公演論文集","精密工学会",,,"pp. 149-150",2019,Mar.
"竹内亮大郎,岩本喜直,河越雅雄,谷口紘章,平田祐樹,赤坂大樹,大竹尚登","物理気相成長法を用いたa-BCN膜の作製と評価","2019年度精密工学会春季大会","2019年度精密工学会春季大会公演論文集","精密工学会",,,"pp. 151-152",2019,Mar.
"赤坂 大樹,Sarayut Tunmee,Chanan Euaruksakun,Ukit Rittihong,Ratchadaporn Supruangnet,平田 祐樹,大竹 尚登","アモルファス炭素膜の熱分解挙動と構造変化の均一性","2019年 第66回応用物理学会春季学術講演会",,,,,,2019,Mar.
"Michael Behrens,Jeffrey Scott Cross,Hiroki Akasaka,NAOTO OHTAKE","Pyrolysis of cellulose mixed with ionic liquids 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [bmim][TFSI], 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4], and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate [bmmim][BF4]",,"Biomass and Bioenergy",,"Vol. 122",,"pp. 290-297",2019,Feb.
"Takuya Osawa,Yuya Eyama,Makoto Matsuo,Hiroshi Yamamoto,Shinji Tanaka,Masao Kikuchi,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","DESIGN OF DIAMOND-LIKE CARBON COATINGS FOR SEVERE ENVIRONMENT USE","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Jun Enomoto,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","FABRICATION OF ANTI-STICKING DIAMOND-LIKE CARBON COATINGS","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"大竹尚登","カーボン膜の分類",,"メカニカル・サーフェス・テック","株式会社メカニカル・テック社","Vol. 47",,"pp. 30-32",2018,Dec.
"Sarayut Tunmee,Chanan Euaruksakul,Ukit Rittihong,Hiroki Akasaka,Hideki Nakajima,Naoto Ohtake,Hidetoshi Saitoh","In Situ NEXAFS Study on sp2/sp3 ratio Diamond-like Carbon films at various temperature","The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,,2018,Dec.
"Naoki Sugihara,Naoto Ohtake,Hiroki Akasaka","Long Term investigation of Corrosion Resistance on the Diamond-Like Carbon films using SPR Phenomenon","The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,,2018,Dec.
"Keisuke Suzuki,Tetsuya Yamamoto,Yuki HIrata,Naoto Ohtake,Hiroki Akasaka","Tribological Properties of a-BCN:H on Ball against DLC films in high humidity air","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Saaya Matsubara,Tetsuya Yamamoto,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Effects of deposition condition of a-BCN:H films from tri-methyl-borazine on true densities","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Masashi Tomidokoro,Sarayut Tunmee,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Structure and electrical conduction characteristics in hydrogenated amorphous carbon films","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Wataru Nakayama,Nobuhisa Ata,Nana Okimura,Satoshi Momozono,Yuki Hirata,Naoto Ohtake,Hiroki Akasaka","Steel coating deposited by cold spray method from steel particles","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Kouta Wakui,Naoto Ohtake","JOINING OF CFRTP AND ALUMINUM ALLOY THIN PLATES USING ULTRASONIC VIBRATIONS","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)","JSME,MTEC",,,"pp. 120-121",2018,Dec.
"Hiroyuki Taniguchi,Yoshinao Iwamoto,Masao Kawagoe,Ryotaro Takeuchi,Yuki Hirata,Hiroki Akasaka,Naoto Ohtake","DEPOSITION OF a-BCN FILMS AND EVALUATION OF ITS MECHANICAL PROPERTIES","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"Keitaro Takenami,Ryota Takamura,Yuki Hirata,Hiroki Akasaka,NAOTO OHTAKE","DEPOSITION OF DLC FILMS ONTO INNER WALL OF METAL TUBES BY NANOPULSE PLASMA CVD","The 5th Asian Symposium on Materials and Processing(ASMP2018)","Program of The 5th Asian Symposium on Materials and Processing(ASMP2018)",,,,,2018,Dec.
"榎本隼,平田祐樹,赤坂大樹,大竹尚登","高剥離性と耐摩耗性を兼ね備えたDLCコーティングの提案","第32回ダイヤモンドシンポジウム","第32回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 66",2018,Nov.
"田村幸雄,青田洋人,田中真二,菊池雅男,益子正文,大竹尚登","完全配合油潤滑下の窒化処理された鋼の種類 が摩擦摩耗特性に及ぼす影響","トライボロジー会議 2018 秋 伊勢","トライボロジー会議 2018 秋 伊勢 予稿集",,,,,2018,Nov.
"Jumpei Nishikawa,Naoki Sugihara,Masayuki Nakano,Junko Hieda,Naoto Ohtake,Hiroki Akasaka","Effect of Si incorporation on corrosion resistance of hydrogenated amorphous carbon film",,"Diamond and Related Materials",,"Vol. 90",,"pp. 207-213",2018,Nov.
"Yuya Eyama,Takuya Osawa,Hiroshi Yamamoto,Shinji Tanaka,Masao Kikuchi,Hiroki Akasaka,Naoto Ohtake","Effect of corner radius of textured-DLC coatings on wear resistance of stainless plate under severe conditions","ICPE2018","Program of 17th International Conference on Precision Engineering","The Japan Society for Precision Engineering",,,"pp. 159",2018,Nov.
"竹波慶大郎,?村瞭太,平田祐樹,赤坂大樹,大竹尚登","ナノパルスプラズマCVDによる金属円管内へのDLC成膜","第32回ダイヤモンドシンポジウム","第32回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 68",2018,Nov.
"杉原直樹,平田祐樹,大竹尚登,赤坂大樹","表面プラズモン共鳴現象を利用したアモルファス炭素膜の腐食の長期評価法の開発","第32回ダイヤモンドシンポジウム","第32回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 72",2018,Nov.
"沖村奈南,阿多誠久,平田祐樹,大竹尚登,赤坂大樹","DLCコート粒子からのコールドスプレー法による金属-DLC複合材料膜の作製","第32回ダイヤモンドシンポジウム","第32回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 86",2018,Nov.
"竹内亮大郎,平田祐樹,赤坂大樹,大竹尚登","物理気相成長法を用いたa-BCN膜の作製と評価","第32回ダイヤモンドシンポジウム","第32回ダイヤモンドシンポジウム講演要旨集","一般社団法人ニューダイヤモンドフォーラム",,,"pp. 124",2018,Nov.
"榎本隼,平田祐樹,赤坂大樹,大竹尚登","高剥離性と耐摩耗性を有するDLCコーティングの提案","第26回機械材料・材料技術講演会（M&P2018）",,"日本機械学会",,,,2018,Nov.
"大澤卓也,平田祐樹,赤坂大樹,大竹尚登","コンタミダスト混入に対して耐久性を有するDLCを用いた摺動表面設計","第9回トライボロジー秋の学校 in 愛知",,"一般社団法人日本トライボロジー学会",,,,2018,Oct.
"沖村 奈南,阿多 誠久,平田 祐樹,大竹 尚登,赤坂 大樹","DLC コート金属粉体からのコールドスプレー法による複合材料膜作製","トライボロジー秋の学校",,,,,,2018,Oct.
"松原 沙彩,山本 哲也,大竹 尚登,平田 祐樹,赤坂 大樹","トリメチルボラジンから作製したa-BCN:H膜の摺動特性","第9回トライボロジー秋の学校 in 愛知",,,,,,2018,Oct.
"榎本隼,平田祐樹,赤坂大樹,大竹尚登","DLC膜への剥離性の付与","第9回トライボロジー秋の学校 in 愛知",,"一般社団法人日本トライボロジー学会",,,,2018,Oct.
"Yukio Tamura,Hiroto Aota,Shinji Tanaka,Masao Kikuchi,Masabumi Masuko,Naoto Ohtake","Running-in behaviour of nitrided steel with a fully formulated oil","45th Leeds-Lyon Symposium on Tribology  Smart Tribology Systems",,,,,"pp. s34_p01",2018,Sept.
"沖村 奈南,阿多 誠久,山田 貴壽,大竹 尚登,赤坂 大樹,平田 祐樹","コールドスプレー法で作製したCu-グラフェン複合材料 膜の摺動特性","第79回応用物理学会 秋季学術講演会","第79回応用物理学会 秋季学術講演会 予稿集",,,,,2018,Sept.
"Junko Hieda,Akira Sakaguchi,Masayuki Nakano,Hiroki Akasaka,Naoto Ohtake","Relationships between surface energy and charge of surface-modified titanium and HAp formation",,"Applied Surface Science","Elsevier","Vol. 465",,"pp. 509",2018,Sept.
"E. Netnapa,M. Mariatti,Z. Ahmad,Naoto Ohtake,Hiroki Akasaka,L. Banhan","Effects of Molar Ratios Between Surfactant and Aniline in Synthesis of Polyaniline",,"Journal of Physics: Conference Series","IOP science","Vol. 1082",,"pp. 012102",2018,Aug.
"NAOTO OHTAKE","Deposition and Characterization of Diamond-like Carbon Films","2018 13th International Workshop on Biomaterials in Interface Science","Program and Abstracts of 13th International Workshop on Biomaterials in Interface Science","ICC-IMR",,,"pp. 23",2018,Aug.
"E. Netnapa,M. Mariatti,Z. Ahmad,Naoto Ohtake,Hiroki Akasaka,L. Banhan","Effects of Molar Ratios Between Surfactant and Aniline in Synthesis of Polyaniline",,"Journal of Physics: Conference Series","IOP science","Vol. 1082",,"pp. 012102",2018,Aug.
"Nobuhisa Ata,Nana Okimura,Naoto Ohtake,Hiroki Akasaka","Carbon Nanotube-Engineering Plastic Composite Films Fabricated by Low-Pressure Cold Spray Technique","International Conference on Ceramic Materials and Components for Energy and Environmental Applications 2018, Jul. 2018.",,,,,,2018,July
"Nana Okimura,Nobuhisa Ata,Takatoshi Yamada,Naoto Ohtake,Hiroki Akasaka","Fabrication of Carbon - Copper composite films by Low Pressure Cold Spray Method","International Conference on Ceramic Materials and Components for Energy and Environmental Applications 2018",,,,,,2018,July
"大竹尚登","大学における産学連携・オープンイノベーションの現状とIoT/AI時代におけるオープンイノベーション推進協議会への期待","IoT/AI時代におけるオープンイノベーション推進協議会",,,,,,2018,July
"阿多 誠久,沖村 奈南,大竹 尚登,赤坂 大樹","コールドスプレー法を用いたカーボンナノチューブ-熱可塑性プラスチック複合材料の作製","溶射学会全国講演大会",,,,,,2018,June
"Nana Okimura,Nobuhisa Ata,Naoto Ohtake,Hiroki Akasaka","Cu-DLC composite fabricated by cold spray technique","12th New Diamond and Nano Carbons Conference (NDNC 2018)",,,,,,2018,May
"Jumpei Nishikawa,Naoki Sugihara,Naoto Ohtake,Hiroki Akasaka","Investigation of Corrosion Resistance on the Si Doped  Diamond-Like Carbon Films Using SPR Phenomenon","12th New Diamond and Nano Carbons Conference (NDNC 2018)",,,,,,2018,May
"Nobuhisa Ata,Nana Okimura,Ryota Ohtani,Hiroshi Uetuka,Naoto Ohtake,Hiroki Akasaka","Tribological Properties on Carbon Nanotubes Containing Copper-Diamond Composite Films Deposited by Cold Spray Technique","12th New Diamond and Nano Carbons Conference (NDNC 2018)",,,,,,2018,May
"Nobuhisa Ata,Nana Okimura,Naoto Ohtake,Hiroki Akasaka","Carbon Nanotube-Engineering Plastic Composite Films Deposited byLow-Pressure Cold Spray Technique","CIAiS International Symposium 2018","CIAiS International Symposium 2018 Abstract Book",,,,,2018,Mar.
"沖村 奈南,阿多 誠久,大竹 尚登,赤坂 大樹","コールドスプレー法で作製したCu-DLC複合材料膜の摺動特性","2018年第65回応用物理学会春季学術講演会",,"応用物理学会",,,,2018,Mar.
"阿多 誠久,沖村 奈南,大竹 尚登,赤坂 大樹","カーボンナノチューブ-エンジニアリングプラスチック複合材料のコールドスプレー法を用いた作製","2018年第65回応用物理学会春季学術講演会","2018年第65回応用物理学会春季学術講演会 講演予稿集","応用物理学会",,,,2018,Mar.
"大竹尚登","DLCの規格化と応用の動向",,"月刊トライボロジー","新樹社月刊トライボロジー編集部","Vol. 365","No. 1","pp. 12-15",2018,Jan.
"松原 沙彩,河越 奈沙,山本 哲也,大竹 尚登,赤坂 大樹","トリメチルボラジンからのa-BCN:H膜の作製と作製時の条件が密度に与える影響","第３１回ダイヤモンドシンポジウム","第３１回ダイヤモンドシンポジウム要旨集","ニューダイヤモンドフォーラム",,,,2017,Nov.
"大竹尚登","DLCの国際標準化?カーボン膜の分類規格を中心として?","一般社団法人ＤＬＣ工業会設立記念講演会","一般社団法人ＤＬＣ工業会設立記念講演会講演要旨集","一般社団法人ＤＬＣ工業会",,,"pp. 3-22",2017,Nov.
"阿多 誠久,沖村 奈南,大竹 尚登,赤坂 大樹","コールドスプレー法を用いた配向性CNT?ポリマー複合材料膜の作製","日本機械学会第１回機械材料・材料加工部門 若手ポスターシンポジウム","日本機械学会第１回機械材料・材料加工部門 若手ポスターシンポジウム要旨集","日本機械学会",,,,2017,Nov.
"鈴木 啓介,山本 哲也,大竹 尚登,赤坂 大樹","DLC膜とa-BCN:H膜の摺動特性におけるホウ素濃度の影響","第３１回ダイヤモンドシンポジウム","第３１回ダイヤモンドシンポジウム要旨集","ニューダイヤモンドフォーラム",,,,2017,Nov.
"大竹尚登","DLCコーティング技術を取り巻く現状","平成29年度第2回表面物性研究会","講演テキスト","一般社団法人表面技術協会関西支部",,,"pp. 1-19",2017,Oct.
"阿多 誠久,沖村 奈南,大竹 尚登,赤坂 大樹","コールドスプレー法を用いた混合粉体からの複合材料厚膜の合成","第３回日本機械学会イノベーション講演会","日本機械学会第3回イノベーション講演会（iJSME2017)講演要項集","日本機械学会",,,"pp. 102",2017,Oct.
"河越雅雄,今野敬士,赤坂大樹,大竹尚登,菊池雅男,山本浩","異物混入時の摩耗現象の把握と耐摩耗表面処理法の開発","2017年度精密工学会秋季大会","2017年度精密工学会秋季大会アブストラクト集","精密工学会秋季大会",,,"pp. 72",2017,Sept.
"阿多 誠久,沖村 奈南,大竹 尚登,赤坂 大樹","配向性CNT-ポリマー複合材料膜のコールドスプレー法を用いた作製","2017年第78回応用物理学会秋季学術講演会","2017年第78回応用物理学会秋季学術講演会予稿集","応用物理学会",,,,2017,Sept.
"沖村 奈南,阿多 誠久,大谷 亮太,上塚 洋,大竹 尚登,赤坂 大樹","コールドスプレー法で作製したCu-ダイヤモンド複合材料膜の研削性","2017年第78回応用物理学会秋季学術講演会","2017年第78回応用物理学会秋季学術講演会予稿集","応用物理学会",,,,2017,Sept.
"NAOTO OHTAKE","The Development of University Spin-off Companies in Japan-Industry Liaison and Startups at Tokyo Tech","Conference on Innovation and Intellectual Property Application of Startups for Educators 2017",,"MOE Regional Industry-University Cooperation Center-NTUST",,,"pp. 5",2017,Sept.
"Shahira Liza,谷口紘章,稗田純子,赤坂大樹,大竹尚登","TiNb合金へのホウ素含有DLC膜の作製とその機械的特性および抗血栓性の評価","2017年度精密工学会秋季大会","2017年度精密工学会秋季大会アブストラクト集","精密工学会",,,"pp. 72",2017,Sept.
"山下崇裕,赤坂大樹,大竹尚登","ダイヤモンド粒傷つけ処理によるDLCコーティングの耐剥離性向上","2017年度精密工学会秋季大会","2017年度精密工学会秋季大会アブストラクト集","精密工学会",,,"pp. 72",2017,Sept.
"Nobuhisa Ata,Naoto Ohtake,Hiroki Akasaka","Polyethylene?Carbon Nanotube Composite Film Deposited by Cold Spray Technique",,"Journal of Thermal Spray Technology",,"Vol. 26",,"pp. 1541",2017,Aug.
"大竹尚登","DLCの現在と未来","JSPS日本学術振興会プラズマ材料科学153委員会",,,,,,2017,July
"Keisuke Suzuki,Nasa Kawagoshi,Tetsuya Yamamoto,Naoto Ohtake,Hiroki Akasaka","Deposition of a BCN: H and DLC films on ball and their tribological properties","6th JSME/ASME 2017 International Conference on Materials and Processing, ICM&P2017","ICM&P2017 Abstract book",,,,,2017,June
"鈴木啓介,大竹尚登,赤坂大樹","CNT表面から樹脂を成長させたフィラーを用いた樹脂基複合材料の作製","プラスチック成形加工学会第28回年次大会","プラスチック成形加工学会予稿集,","プラスチック成形加工学会",,,,2017,June
"Nobuhisa Ata,Naoto Ohtake,Hiroki Akasaka","Carbon Nanotube/Polyethylene Composite Fabricated by Cold Spray Technique","6th JSME/ASME 2017 International Conference on Materials and Processing, ICM&P2017","ICM&P2017 Abstract book",,,,,2017,June
"阿多 誠久,大竹 尚登,赤坂 大樹","CNT/ポリマーコンポジット膜のコールドスプレー法を用いた作製","プラスチック成形加工学会第28回年次大会","プラスチック成形加工学会予稿集","プラスチック成形加工学会",,,,2017,June
"Michael Behrens,Jeffrey S. Cross,Hiroki Akasaka,Naoto Ohtake","A study of guaiacol, cellulose, and Hinoki wood pyrolysis with silica, ZrO2&TiO2 and ZSM-5 catalysts",,"Journal of Analytical and Applied Pyrolysis","Elsevier","Vol. 125",,"pp. 178-184",2017,Apr.
"NAOTO OHTAKE","Trends on Application and Classification of Diamond-like Carbon Films","TTRF-TAIHO Int. Symp. on Automotive Tribology 2017","TTRF-TAIHO Int. Symp. on Automotive Tribology 2017",,,,,2017,Apr.
"鈴木 啓介,河越奈沙,山本哲也,大竹 尚登,赤坂 大樹","球表面へのa-BCN:H膜の合成と摩擦摩耗特性の評価","第64回応用物理学会春季学術講演会","第64回応用物理学会春季学術講演会 講演予稿集",,,,,2017,Mar.
"Behrens M.A.,Akasaka H.,Ohtake N.,Cross J.S.","Cellulose Pyrolysis Catalyzed using [bmim][BF4] and [bmim][TFSI] Ionic Liquids Supported on Silica and ZrO2&TiO2","Sustainable Energy and Environmental Sciences","Sustainable Energy and Environmental Sciences",,"Vol. 6",,"pp. 58-65",2017,Mar.
"阿多 誠久,大竹 尚登,赤坂 大樹","低圧コールドスプレー法により作製したCu-CNT複合材料膜の摩擦特性","2017年第64回応用物理学会春季学術講演会","2017年第64回応用物理学会春季学術講演会予稿集","応用物理学会",,,,2017,Mar.
"西川 純平,大竹 尚登,赤坂 大樹","アモルファス炭素系膜と水酸化ナトリウム水溶液の反応検出","第64回応用物理学会春季学術講演会","第64回応用物理学会春季学術講演会 講演予稿集",,,,,2017,Mar.
"Shahira Liza,Junko Hieda,Hiroki Akasaka,Naoto Ohtake,Yusuke Tsutsumi,Akiko Nagai,Takao Hanawa","Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility",,"Science and Technology of Advanced Materials","Taylor & Francis,NIMS","Vol. 18","No. 1","pp. 76 -87",2017,Jan.
"Michael Behrens,Hiroki Akasaka,NAOTO OHTAKE,Jeffrey Scott Cross","Design of Experiment and Upgrading of Pyrolysis Vapors Using ZrO2-TiO2, ZSM-5, and Silica Catalysts",,"Journal of Materials and Environmental Science",,"Vol. 8","No. 5","Page 1617-1625",2017,Jan.
"NAOTO OHTAKE","SPECIAL ISSUE ON CARBON-BASED THIN FILMS PREFACE",,"SENSORS AND MATERIALS","MYU, SCIENTIFIC PUBLISHING DIVISION","Vol. 29","No. 6",,2017,
"Akasaka, Hiroki,Nishikawa, Jumpei,NAOTO OHTAKE","Pitting Corrosion on Diamond-like Carbon Films in High Concentration Sodium Hydroxide Solutions",,"SENSORS AND MATERIALS","MYU, SCIENTIFIC PUBLISHING DIVISION","Vol. 29","No. 6","pp. 827-833",2017,
"Eawwiboonthanakit, N.,Jaafar, M.,Ahmad, Z.,NAOTO OHTAKE,Lila, B.","Fabrication of PEDOT: PSS/graphene conductive ink printed on flexible substrate",,"Solid State Phenomena",,"Vol. 264 SSP",,"pp. 70-73",2017,
"Juan M. Munoz-Guijosa,Genki Nanaumi,Kazuki Ohtani,Naoto Ohtake","Perpendicular ultrasonic joining of steel to aluminium alloy plates",,"Journal of Materials Processing Technology","Elsevier","Vol. 243",,"pp. 112-122",2016,Dec.
"阿多 誠久,大竹 尚登,赤坂 大樹","コールドスプレー法を用いたコンポジット膜の形成","日本機械学会第24回機械材料・材料加工技術講演会（M&P2016）","日本機械学会第24回機械材料・材料加工技術講演会（M&P2016）講演要旨集","日本機械学会",,,,2016,Nov.
"河越 奈沙,山本 哲也,大竹 尚登,赤坂 大樹","DLCコート球の各種基板に対する摺動特性","第24回機械材料・材料加工技術講演会","第24回機械材料・材料加工技術講演会講演要旨集","日本機械学会",,,,2016,Nov.
"赤坂 大樹,阿多 誠久,大竹 尚登","カーボンナノファイバー含有金属厚膜のコールドスプレー法による作製","第30回ダイヤモンドシンポジウム","第30回ダイヤモンドシンポジウム要旨集",,,,,2016,Nov.
"Nasa KAWAGOSHI,Masayuki NAKANO,Tetsuya YAMAMOTO,Junko HIEDA,Naoto OHTAKE,Hiroki AKASAKA","Deposition of the a-BCN film formed from tri-methylborazine","The 16th International Conference on Precision Engineering","The 16th International Conference on Precision Engineering Abstract book","JSPE",,,,2016,Nov.
"Jumpei NISHIKAWA,Masayuki NAKANO,Junko HIEDA,Naoto OHTAKE,Hiroki AKASAKA","Corrosion Resistance of Si-Doped Amorphous Carbon Film to Nitric Acid","The 16th International Conference on Precision Engineering","The 16th International Conference on Precision Engineering Abstract book",,,,,2016,Nov.
"大竹尚登","DLCコーティングの応用",,"ケミカルエンジニヤリング","化学工業社","Vol. 61","No. 10","pp. 45-50",2016,Oct.
"河越 奈沙,大竹 尚登,赤坂 大樹","球へのダイヤモンド状炭素膜の形成","サステイナブルトライボロジー会議2016","サステイナブルトライボロジー会議2016 要旨集",,,,,2016,Oct.
"阿多誠久,大竹尚登,赤坂大樹","コールドスプレー法により作製した銅/カーボンナノチューブ複合材料膜表面","サステイナブルトライボロジー会議2016","サステイナブルトライボロジー会議2016 要旨集",,,,,2016,Oct.
"赤坂 大樹1,鈴木 常生,中野 雅之,神田 一浩,大竹 尚登","ダイヤモンド状炭素系膜の耐薬品性能評価","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会要旨集 CDROM 14p-A23-1~9]",,,,,2016,Sept.
"西川純平,中野雅之,稗田純子,大竹尚登,赤坂大樹","ケイ素添加によるアモルファス炭素系膜の耐食性能の向上","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会 CDROM 15a-A26-9",,,,,2016,Sept.
"阿多 誠久,大竹 尚登,赤坂 大樹","コールドスプレー法を用いたPE/CNT複合材料膜の作製","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会 CD=ROM 15p-A25-10",,,,,2016,Sept.
"鈴木 啓介,大竹 尚登,赤坂 大樹","CNT表面からPMMAを成長させたフィラーを用いた樹脂基複合材料","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会 要旨集CDROM 13p-P5-18]",,,,,2016,Sept.
"大竹 尚登","DLC 膜の構造と分類","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会 講演予稿集","応用物理学会",,,"  14P-A23-2",2016,Sept.
"大竹尚登,加納眞 ほか","DLCの基礎と応用展開",,,"シーエムシー出版",,,,2016,July
"帯川利之,笹原弘之,池野順一,大竹尚登,国枝正典,長藤圭介,新野俊樹","はじめての生産加工学２",,,"講談社",,,,2016,June
"大竹 尚登","DLCコーティングの基礎と応用","材料機能ドライプロセス部会第100回例会","プログラム","一般社団法人 表面技術協会",,,"pp. 20-35",2016,May
"大竹 尚登","特集「DLC最前線」にあたって",,"金属","アグネ技術センター","Vol. 86","No. 5","pp. 3",2016,May
"Naoto Ohtake","Deposition and Characterization of Segment-structured Tetrahedral Amorphous Carbon Films","International Conference on Materials Processing Technology 2016",,,,,,2016,Mar.
"河越 奈沙,山本 哲也,大竹 尚登,赤坂 大樹","球表面へ形成したDLC膜に対するa-BCN:H膜の摩擦係数","第77回応用物理学会秋季学術講演会","第77回応用物理学会秋季学術講演会要旨集CDROM15a-A26-11",,,,,2016,
"河越 奈沙,山本 哲也,中野 雅之,岩本 喜直,松尾 誠,稗田 純子,大竹 尚登,赤坂 大樹","トリメチルボラジンからのa-BCN膜の作製","第63回応用物理学会春季学術講演会","第63回応用物理学会春季学術講演会CDROM 20p-H103-15",,,,,2016,
"山中康平,松元彰大,大竹尚登","カーボンナノチューブを用いた高出力微生物燃料電池の高出力化",,"工業と製品：セラミックデータブック2015/16年版","工業製品技術協会（株式会社テクノプラザ）","Vol. 43","No. 97","pp. 145-148",2015,Dec.
"河越奈沙,稗田純子,大竹尚登,赤坂大樹","アモルファス炭素膜の形成したリニアガイドレールの摺動特性評価","第２９回ダイヤモンドシンポジウム","第２９回ダイヤモンドシンポジウム 講演要綱集",,,,,2015,Nov.
"Behrens M.A.,Akasaka H.,Ohtake N.,Cross J.S.","Upgrading Japanese Cypress Pyrolysis Vapors using Zr-Ti and Silica Catalysts","International Symposium on Engineering, Energy and Environment","International Symposium on Engineering, Energy and Environment",,"Vol. 4",,"pp. 449-456",2015,Nov.
"Genki Nanaumi,Daisuke Mizushima,Naoto Ohtake","Joining of various kinds of metal plates using ultrasonic vibrations","11th International Conference on Technology of Plasticity, ICTP 2014","Proceedings of ICTP2014","Elzevir",,"No. 81","pp. 2111-2116",2015,Oct.
"Yutaro Suzuki,Yasuyoshi Kurokawa,Tsuneo Suzuki,Kazuhiro Kanda,Masahito Niibe,Masayuki Nakano,Naoto Ohtake,Hiroki Akasaka","Structure and physical properties of stable isotopic amorphous carbon films",,"Diamond and Related Materials",,"Vol. 63",,"pp. 115",2015,Oct.
"Shahira Liza Kamis,Naoto Ohtake,Hiroki Akasaka,Juan M. Munoz‐Guijosa","Mechanical Properties and Tribological Behaviors of Boron-doped Diamond-like Carbon (DLC) Film","International Tribology Conference2015",,"Japanese Society of Tribologists",,,,2015,Sept.
"Shahira Liza Kamis,Junko Hieda,Makoto Matsuo,Yoshinao Iwamoto,Yusuke TsuTsumi,Akiko Nagai,Takao Hanawa,Hiroki Akasaka,Naoto Ohtake","パルスプラズマCVD法により作製したa-BC:H膜の血液適合性","日本機械学会2015年度年次大会","日本機械学会2015年度年次大会総合プログラム","日本機械学会",,,"pp. 49",2015,Sept.