"Shogo Kadonishi,Hiraku Sakamoto,MASAAKI OKUMA","Deployment behavior of planar gossamer space structures made of plain-woven textile",,"Acta Astronautica",,,,,2022,Jan.
"M. Kato,H. Sakamoto,T. Tomura,M. Okuma","Phase Adjustment Algorithm for Deformation Compensation of Nonflat Reflectarray Antenna","International Symposium on Antennas and Propagation (ISAP2020)",,"IEEE",,,,2022,
"森谷元喜,坂本啓,大熊政明","超小型人工衛星の開発手法と信頼性の相関事例分析","第30回スペース・エンジニアリング・コンファレンスSEC'21",,"日本機械学会",,,,2021,Dec.
"武田真司,坂本啓,大熊政明","テザー伸展式宇宙太陽風セイルの動力学解析","第30回スペース・エンジニアリング・コンファレンスSEC'21",,"日本機械学会",,,,2021,Dec.
"Shogo Kadonishi,Hiraku Sakamoto,Masaaki Okuma","Compact Packaging of Planar Gossamer Space Structures Using Textile Membranes",,"Transactions of Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan",,"Vol. 19","No. 2","pp. 245-251",2021,Oct.
"嶋田有登,坂本啓,大熊政明","アレーアンテナを搭載した織物展開構造の熱設計","第64回宇宙科学技術連合講演会",,,,,,2020,Oct.
"武田 真司,小出 紗瑛,大本 圭祐,坂本 啓,田中 宏明,石村 康生,大熊 政明","宇宙形状可変鏡における複数アクチュエーションの連成とヒステリシス",,"航空宇宙技術",,"Vol. 19",,"pp. 151-158",2020,Oct.
"加藤雅己,坂本啓,戸村崇,大熊政明","非平面アレーアンテナ平面度補償のための位相調整アルゴリズムの検討","第64回宇宙科学技術連合講演会",,,,,,2020,Oct.
"Keisuke Omoto,Takashi Tomura,Hiraku Sakamoto,JIRO HIROKAWA,MASAAKI OKUMA","Basic Study on Deformation Reconfiguration Technology for 5.8-GHz-band Reflectarray Antennas","PIERS",,,,,,2019,Dec.
"武田真司,小出紗瑛,大本圭祐,坂本啓,大熊政明,田中宏明,石村康生","宇宙形状可変鏡における変位の連成特性に関する研究","第35回 宇宙構造・材料シンポジウム",,,,,,2019,Dec.
"大本圭祐,坂本啓,戸村崇,廣川二郎,大熊政明","非平面度補償5.8GHz帯アクティブリフレクトアレーの試作と評価","第63回宇宙科学技術連合講演会",,,,,,2019,Nov.
"大野奎悟,坂本啓,大熊政明,岡田健一,白根篤史,戸村崇,Dongwon You","フレキシブル基板を搭載した宇宙展開織物膜構造の収納性","第５回宇宙太陽発電(SSPS)シンポジウム",,,,,,2019,Nov.
"大野 奎悟,坂本 啓,大熊 政明,岡田 健一,白根 篤史,戸村 崇,Dongwon You","織物膜宇宙構造の収納性に関する研究","宇宙太陽発電シンポジウム",,,,,,2019,Nov.
"小出紗瑛,大本圭祐,坂本啓,田中宏明,石村康生,大熊政明","熱膨張率不整合を低減させた形状可変鏡の熱変形特性計測","第63回宇宙科学技術連合講演会",,,,,,2019,Nov.
"Shogo Kadonishi,Hiraku Sakamoto,Masaaki Okuma","Compact Packaging of Planar Gossamer Space Structures Using Textile Membranes","32nd International Symposium on Space Technology and Science (ISTS)",,,,,,2019,June
"Britta Hohmann,Hiraku Sakamoto,Masaaki Okuma","Influence of Storage Configurations on the Deployment Behavior of Boom-Membrane Integrated Space Structures","AIAA Spacecraft Structures Conference, SciTech2019",,,,,,2019,Jan.
"仁尾航,坂本啓,大熊政明,渡邊秋人","織物膜構造物における薄型デバイス貼付および配線法の検討","第34回 宇宙構造・材料シンポジウム",,,,,,2018,Dec.
"大本圭祐,坂本啓,田中宏明,石村康生,大熊政明","宇宙アンテナ形状制御機構の駆動状態での熱変形の評価と制御","第62回宇宙科学技術連合講演会",,,,,,2018,Oct.
"柏山礼興,坂本啓,田中宏明,大熊政明,石村康生","宇宙アンテナ形状制御機構の熱変形低減法の試作による評価",,"日本機械学会論文集",,"Vol. 84","No. 863",,2018,Oct.
"飯島亮,坂本啓,大熊政明,下田優弥,倉富剛,日高菜奈","超小型衛星搭載膜構造の画像撮影による軌道上形状計測","第62回宇宙科学技術連合講演会",,,,,,2018,Oct.
"Reo Kashiyama,Hiraku Sakamoto,Masaaki Okuma,Hiroaki Tanaka,Kosei Ishimura","Athermalization of Deformable Reflector's Actuators for Radio Astronomy Satellites","AIAA Spacecraft Structures Conference, SciTech2018",,,,,,2018,Jan.
"Yuri Terada,Hiraku Sakamoto,Masaaki Okuma","Characteristics of Deployable Planar Origami Structures with Partial Constraints",,,,,,,2018,Jan.
"中村惇哉,坂本啓,倉富剛,日高菜奈,大熊政明","超小型衛星に搭載する開断面複合材伸展マストの動解析","2017年度日本機械学会年次大会",,,,,,2017,Sept.
"柏山礼興,坂本啓,田中宏明,大熊政明","宇宙アンテナ形状制御機構の熱変形低減法の試作による評価","2017年度日本機械学会年次大会",,,,,,2017,Sept.
"Mario Walker,Masaaki Okuma,Hiraku Sakamoto","Attenuation of tall flexible structures using longitudinal moving mass: Moving finite element method",,"Noise and Vibration Worldwide",,"Vol. 48","Issue 9-10","pp. 119-131",2017,Sept.
"Aya Aihara,Takayuki Kawaguchi,N. Miki,T. Azami,Hiraku Sakamoto,Masaaki Okuma","A Vibration Estimation Method for Wind Turbine Blades",,"Experimental Mechanics",,"Vol. 57","No. 8","pp. 1213-1224",2017,May
"Kyunghyun Lee,Aya Aihara,Ganbayar Puntsagdash,Takayuki Kawaguchi,Hiraku Sakamoto,Masaaki Okuma","Feasibility study on a strain based deflection monitoring system for wind turbine blades",,"Mechanical Systems and Signal Processing",,"Vol. 82",,"pp. 117-129",2017,Jan.
"中村 惇哉,坂本 啓,倉富 剛,日高 奈菜,大熊政明","超小型衛星に搭載する開断面複合材伸展マストの動解析",,"年次大会","一般社団法人 日本機械学会","Vol. 2017",,"pp. S1920104",2017,
"柏山 礼興,坂本 啓,田中 宏明,大熊政明","宇宙アンテナ形状制御機構の熱変形低減法の試作による評価",,"年次大会","一般社団法人 日本機械学会","Vol. 2017",,"pp. J1910103",2017,
"Walker, M.,MASAAKI OKUMA,Hira, Y.","Damping effect on tall building low frequency vibration using two degree-of-freedom enhanced coriolis effect damper",,"Proceedings of the 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS 2017, MBD 2017",,"Vol. 2017-January",,"pp. 425-434",2017,
"MASAAKI OKUMA","Development of a deflection monitoring system for wind turbine blades",,"IOMAC 2017 - 7th International Operational Modal Analysis Conference",,,,"pp. 39-47",2017,
"Bur, M.,Son, L.,Rusli, M.,MASAAKI OKUMA","Parametric study of pendulum type dynamic vibration absorber for controlling vibration of a two DOF structure",,"Earthquake and Structures",,"Vol. 13","No. 1","pp. 51-58",2017,
"小川睦大,坂本啓,大熊政明,下田優弥,倉富剛,日高菜奈","超小型衛星を用いた膜構造の軌道上ステレオ視計測システム","第32回宇宙構造・材料シンポジウム",,,,,,2016,Dec.
"柏山礼興,津久井謙,坂本啓,大熊政明,田中宏明","宇宙アンテナ形状制御機構における熱変形の評価と低減法の開発","第32回宇宙構造・材料シンポジウム",,,,,,2016,Dec.
"三木暢之,川口卓志,坂本啓,大熊政明","翼素運動量理論に基づく簡易数値解析による風車ブレードの振動挙動分析","日本機械学会関東支部第22期総会講演会","日本機械学会第２２期総会講演論文集",,,,,2016,May
"Kouta Gotou,Hiraku Sakamoto,Akiya Inagaki,Hiroaki Tanaka,Kosei Ishimura,Masaaki Okuma","Actuator Design for Space Smart Reflector to Reduce Thermal Distortion",,"Transactions of Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan",,"Vol. 14","Issue ists30","pp. 25-31",2016,May
"Masaaki Okuma,Atsushi Kondo","Mass Property Identification of Individual Components in Multi-rigid-body Systems without Decomposition","The 4th Joint International Conference on Multibody System Dynamics","USB type proceedings of the conference",,,,,2016,May
"三木暢之,川口卓志,坂本啓,大熊政明","翼素運動量理論に基づく簡易数値解析による風車ブレードの振動挙動分析","日本機械学会関東支部第22期総会講演会","日本機械学会第２２期総会講演論文集",,,,,2016,May
"字見卓也,川口卓志,大熊政明","大型風力発電機ブレード用振動観測システムの開発と初実装試験","日本機械学会関東支部第２２期総会講演会",,,,,,2016,Mar.
"粟飯原あや,川口卓志,大熊政明","風車発電ブレードの振動モニタリング手法に関する基礎研究","日本機械学会関東支部第２２期総会講演会","日本機械学会関東支部第２２期総会講演論文集",,,,,2016,Mar.
"Nishizawa, T.,Sakamoto, H.,MASAAKI OKUMA","Shape estimation and design methods for membrane structures to achieve appropriate flatness",,"3rd AIAA Spacecraft Structures Conference",,,,,2016,
"Kazuaki Hayasaki,Hiraku Sakamoto,Hiroaki Tanaka,Kosei Ishimura,MASAAKI OKUMA","Design and Analysis of Smart Space Reflectors Driven by Piezoelectric Actuators","26th International Conference on Adaptive Structures and Technologies",,,,,,2015,Oct.
"Kouta Gotou,Hiraku Sakamoto,Akiya Inagaki,Hiroaki Tanaka,Kosei Ishimura,Masaaki Okuma","Actuator Design for Space Smart Reflector to Reduce Thermal Distortion","34th International Symposium on Space Technology and Science",,,,,,2015,July
"大熊政明,金子成彦,吉田英生,編集","事例で学ぶ数学活用法",,"事例で学ぶ数学活用法","株式会社 朝倉書店",,,,2015,Feb.
"A. Inagaki,H. Sakamoto,H. Tanaka,K. Ishimura,M. Okuma","Experimental Study of Reflector Shape Control under Various Thermal Conditions","AIAA Science and Technology Forum and Exposition 2015",,,,,,2015,Jan.
"Hayasaki, K.,Sakamoto, H.,Tanaka, H.,Ishimura, K.,MASAAKI OKUMA","Design and analysis of smart space reflectors driven by piezoelectric actuators",,"26th International Conference on Adaptive Structures and Technologies, ICAST 2015",,,,,2015,
"T. Nishizawa,H. Sakamoto,M. Okuma,H. Furuya,Y. Sato,N. Okuizumi,Y. Shirasawa,O. Mori","Evaluation of Crease Stiffness on Out-of-plane Stiffness of Solar Sails",,"Transactions of Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan","JSASS","Vol. 12","No. ists29","pp. Pc107-Pc113",2014,Dec.
"H. Sakamoto,S. Kadonishi,Y. Satou,H. Furuya,Y. Shirasawa,N. Okuizumi,O. Mori,H. Sawada,J. Matsumoto,Y. Miyazaki,M. Okuma","Development of Repeatable Storage Method for a Large Solar Sail",,"Transactions of Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan","JSASS","Vol. 12","No. ists29","pp. Pc75-Pc82",2014,Nov.
"稲垣章弥,坂本啓,田中宏明,石村康生,大熊政明","様々な温度環境におけるスマート形状可変鏡の形状制御","第58回宇宙科学技術連合講演会",,,,,,2014,Nov.
"佐藤剛志,坂本啓,新宅健吾,大野剛,松永三郎,森治,白澤洋次,奥泉信克,大熊政明","折り目剛性を考慮した宇宙膜構造の非対称展開挙動の解析",,"日本航空宇宙学会論文集・航空宇宙技術",,"Vol. 13",,"pp. 71-75",2014,Sept.
"Tadashi Nishizawa,Hiraku Sakamoto,M. Okuma,H. Furuya,Y. Satou,N. Okuizumi,Y. Shirawasa,O. Mori","Evaluation of Crease Effects on Out-of-plane Stiffness of Solar Sails","29th International Symposium on Space Technology and Science (ISTS)",,,,,,2014,June
"Hiraku Sakamoto,S. Kadonishi,Y. Satou,H. Furuya,Y. Shirasawa,N. Okuizumi,O. Mori,J. Matsumoto,M. C. Natori,Y. Miyazaki,M. Okuma","Repeatability of Stored Configuration of a Large Solar Sail with Non-negligible Thickness","54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference",,"AIAA",,,,2014,Apr.
"Hiraku Sakamoto,M.C. Natori,Shogo Kadonishi,Y Satou,Y. Shirasawa,N. Okuizumi,O. Mori,HIROSHI FURUYA,MASAAKI OKUMA","Folding Patterns of Planar Gossamer Space Structures Consisting of Membranes and Booms",,"Acta Astronautica",,"Vol. 94","No. 1","pp. 34-41",2014,Jan.
"Amornsawaddirak, T.,Lapapong, S.,Songschon, S.,MASAAKI OKUMA","Physical Characteristics of Twin-Tube Shock Absorber",,"SAE International Journal of Passenger Cars - Mechanical Systems",,"Vol. 7","No. 1","pp. 375-381",2014,
"Kloepper, R.,MASAAKI OKUMA,Bienert, J.","A compact device for measuring rigid-body properties based on five unscaled modes",,"Conference Proceedings of the Society for Experimental Mechanics Series",,"Vol. 7",,"pp. 215-224",2014,
"坂本啓,小木曽望,田中宏明,石村康生,大熊政明","モデル更新による張力構造の高精度解析","第28回宇宙構造・材料シンポジウム",,"宇宙航空研究開発機構",,,,2013,Dec.
"稲垣章弥,坂本啓,田中宏明,石村康生,大熊政明","高精度形状可変副鏡の実験モデルにおける形状制御","第22回スペース・エンジニアリング・コンファレンス",,,,,,2013,Dec.
"川島美香,大熊政明,白石 英孝","等価的音源同定に基づく音場推定法開発のための基礎研究","日本機械学会2012年度年次大会","日本機械学会2012年度年次大会論文集",,,,,2013,Sept.
"D. Pastor,H. Sakamoto,X. Shuyin,M. Okuma","Numerical Simulation of Gossamer Structures Consisting of Membranes and Booms","5th Multidisciplinary International Student Workshop in Tokyo Tech",,,,,,2013,Aug.
"Hiraku Sakamoto,S. Kadonishi,Y. Satou,H. Furuya,Y. Shirasawa,N. Okuizumi,O. Mori,H. Sawada,J. Matsumoto,Y. Miyazaki,M. Okuma","Development of Repeatable Storage Method for a Large Solar Sail","29th International Symposium on Space Technology and Science (ISTS)",,,,,,2013,June
"Robert Kloepper,MASAAKI OKUMA,Joerg Kruger","Neues Verfahren zur Messung Vollsteondiger Treogheitseigenschaften",,"Motortechnische Zeitschrift (Germany)","Springer",,,,2013,Mar.
"BEOMSUK KANG,MASAAKI OKUMA","A Possible Model of a Damping Structure Composed of Polyurethane Foam and Water",,"Journal of System Design and Dynamics, JSME","Japan Society of Mechanical Engineers","Vol. 7","No. 1","pp. 1-14",2013,Feb.
"MASAAKI OKUMA","Vibration damping material composed of polyurethane foam and water","3rd International Conference on Vibro-Impact Systems and Systems with non-smooth interactions",,,,,,2013,
"大熊政明","東工大機械科学科の独創機械設計プロジェクト（将来の技術者養成を考えた大学における設計教育の事例として）",,"日本設計工学会誌",,"Vol. 48","No. 5","pp. 8-13",2013,
"大熊政明","折り目剛性を考慮した宇宙膜構造の非対称展開挙動の解析","第55回構造強度に関する講演会",,,,,,2013,
"門西省吾,坂本啓,佐藤泰貴,古谷寛,白澤洋次,奥泉信克,森治,澤田弘崇,松本純,名取通弘,宮崎康行,大熊政明","厚さを考慮したセイル膜の収納再現性について","第28回宇宙構造・材料シンポジウム",,"宇宙航空研究開発機構",,,,2012,Dec.
"大熊政明","構造動力学?基礎理論から実用手法まで","一般社団法人日本鉄鋼協会生産技術部門設備技術 部会第87回大会",,,,,,2012,Nov.
"H. Sakamoto,M. C. Natori,S. Kadonishi,M. Okuma","Folding Patterns of Planar Gossamer Space Structures Consisting of Membranes and Booms","23rd International Conference on Adaptive Structures and Technologies",,,,,,2012,Oct.
"大熊政明,伏信一慶,八木 透,ムージュノ セリーヌ,田中真二,大河 誠司,武田行生,山浦 弘,中島 求,上野 広,山田 春信,久保 洋一,林 直生樹,寺本 律","W111005 新しい機械の発想・設計・製作プロジェクト「独創機械設計プロジェクト」",,"年次大会 : Mechanical Engineering Congress, Japan","一般社団法人日本機械学会","Vol. 2012",,"pp. "W111005-1"-"W111005-5"",2012,Sept.
"伊勢田均,大熊政明","補聴器の鼓膜位置周波数特性補償に関する基礎研究","日本機械学会2012年度年次大会","日本機械学会2012年度年次大会論文集","日本機械学会",,,,2012,Sept.
"坂本啓,名取通弘,門西省吾,大熊政明","厚さを考慮した平面膜の折り畳みについて","第54回構造強度に関する講演会",,"日本航空宇宙学会",,,,2012,Aug.
"大熊政明","構造の動力学と振動制御理論の基礎","日本建築構造技術者協会構造デザインWG",,,,,,2012,July
"BEOMSUK KANG,MASAAKI OKUMA","Effect of damping material composed of flexible porous material and liquid","9th European Conference on Noise Control (EURONOISE 2012)",,,,,,2012,June
"H. Sakamoto,N. Kogiso,H. Tanaka,K. Ishimura,M. Okuma","Finite-Element Model Updating for Highly Precise Tension-Stabilized Space Reflectors","53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference","Proceedings of 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference","AIAA",,,,2012,Apr.
"BEOMSUK KANG,MASAAKI OKUMA","Preliminary Research on Damping Material Composed of Flexible Porous Material and Liquid",,"Journal of System Design and Dynamics","Japan Society of Mechanical Engineers","Vol. 6","No. 1","pp. 81-87",2012,Feb.
"MASAAKI OKUMA","Basic Study on Frequency Characteristics Compensation of Sound at Ear Drum in Hearing Aids","The 4th Multidisciplinary International Student Workshop",,,,,,2012,
"坂本啓,N. Ragosta,大熊政明","膜構造の展開挙動の有限要素解析とその妥当性確認","第55回宇宙科学技術連合講演会","第55回宇宙科学技術連合講演会講演集",,,,,2011,Nov.
"Robert Kloepper,Takushi Kawaguchi,Arno Mitritz,Tomasz Gingold,Robert Slusarz,大熊 政明","自由振動の振動数参照による剛体特性の高精度同定法の開発","日本機械学会機械力学計測制御部門講演会D&D2011","D&D2011 CD-ROM講演論文集",,,,,2011,Sept.
"中園 利之,小澤 直樹,Robert Kloepper,大熊 政明","柔軟懸架式に基づく低剛性構造物の高精度剛体 特性同定法の開発","日本機械学会機械力学計測制御部門講演会D&D2011","D&D2011 CD-ROM講演論文集",,,,,2011,Sept.
"Robert Kloepper,Masaaki Okuma","The Resonik method ? A new way of measuring rigid body inertia properties","JAXA第8回試験技術ワークショップ",,,,,,2010,Nov.
"MASAAKI OKUMA","Importance of rigid-body property identification","1st TSME-ICoME",,,,,,2010,Oct.
"姜 範錫,瀬川 周平,坂本 啓,大熊 政明","柔軟多孔質材と流体による制振材 開発のための基礎的研究","日本機械学会機械力学計測制御部門講演会D&D2010","D&D2010 CD-ROM講演論文集",,,,,2010,Sept.
"大熊政明","「新・演習 工業力学」",,"「新・演習 工業力学」","数理工学社",,,,2010,Sept.
"秋田 啓仁,Robert Kloepper,寺田聖一,中園 利之,坂本 啓,大熊 政明","高精度 な剛体特性同定法の開発に関する研究","日本機械学会機械力学計測制御部門講演会D&D2010","D&D2010 CD-ROM講演論文集",,,,,2010,Sept.
"中園 利之,人位 智大,Robert Kloepper,坂本 啓,大熊 政明","複数ばね支持による低剛性構造物 の剛体特性同定の高精度化に関する研究","日本機械学会機械力学計測制御部門講演会D&D2010","D&D2010 CD-ROM講演論 文集",,,,,2010,Sept.
"Robert Kloepper,Hiroto Akita,Masaaki Okuma,Seiichi Terada","An experimental identification method for rigid body properties enabled by gravity-dependent suspension model","The 1st Joint International Conference on Multibody System Dynamics",,,,,,2010,May
"MASAAKI OKUMA","Old but Still Hot Research:Rigid-body Property Identification and Squeal Noise Prediction","2nd International conference on Vibro-Impact Systems",,,,,,2010,
"MASAAKI OKUMA,SARA SHAYAN AMIN","A Straightforward Algorithm for the Acquisition of Appropriate set of FRFs by Hammering Test for Modal Analysis","2nd International conference on Vibro-Impact Systems",,,,,,2010,
"Robert Kloepper,Masaaki Okuma","Elimination of Bias Errors Due to Suspension Effects in FRF-Based Rigid Body Properties Identification",,"ASME Transaction,Journal of Dynamic Systems,Measurement and Control",,"Vol. 131","No. 4"," 041005(10pages)",2009,July
"MASAAKI OKUMA","Low Frequency Noise and Vibration Analysis of Boat Based on Experiment-Based Substructure","Proceedings of International Symposium on Vibro-Impact Dynamics of Ocean Systems","JSVに掲載予定",,,,,2009,June
"R.Kloepper,H.Sakamoto,M.Okuma","Experimental identification of rigid body inertia properties using low-frequency unbalance excitation.","50th ASME Structural Dynamics Conference",,,,,,2009,May
"MASAAKI OKUMA","Low Frequency Noise and Vibration Analysis of Boat Based on Experiment-Based Substructure Modeling and Synthesis",,"Lecture Notes in Applied and Computational Mechanics",,"Vol. 44"," Springer","pp. 203-214",2009,
"MASAAKI OKUMA,Robert Kloepper","Experimental identification of rigid body inertia properties using single-rotor unbalance excitation",,"IMechE transaction Part. 2009",,,,,2009,
"MASAAKI OKUMA,Robert Kloepper","Elimination of Bias Errors Due to Suspension Effects in FRF-Based Rigid Body Properties Identification",,"ASME Transaction, Journal of Dynamic Systems, Measurement and Control,2009.",,"Vol. 131"," 4"," 041005",2009,
"MASAAKI OKUMA,Jin-Young JEON","An Optimum Embossment of Rectangular Section in Panel to Minimize",,"ASME Transactions, Journal of Vibration and Acoustics, Vol.130,021012-1~7, APRIL 2008",,,,,2008,Apr.
"MASAAKI OKUMA","Prediction Method of Vibration and Noise regarding Mechanical Systems by Means of Experimental Modeling",,"CD ROM proceedings of ICCES2008",,,,,2008,
"MASAAKI OKUMA,MEIFAL RUSLI","Squeal Noise Prediction in Dry Contact Sliding Systems by Means of Experimental Spatial Matrix Identification",,"JSME International Journal of System Design and Dynamics, Vol.2, No.2,(2008)",,,,,2008,
"大熊政明","仮想測定点追加による実験的特性行列同定法の改良（概念提案と梁モデルに",,"日本機械学会論文集 受付番号：08-0390",,,,,2008,
"MASAAKI OKUMA,Sabah Yesim,MInoru Okubo","Implementation of Single and Multiple Adaptive Step-Size Algorithm to ANC",,"Journal of Vibration and Acoustics, Transaction of ASME, Vol.130, 014503, 2008",,,,,2008,
"MASAAKI OKUMA","Accurate Rigid body Property Identification Based on Low-Frequency",,,,,,,2008,
"MASAAKI OKUMA,AKio Oba,Yoshikazu Fujii","New Evolutionary Method for Simultaneous Structural Strength and",,,,,,,2008,
"大熊政明,中原健志","機械工学のための数学ＩＩ 基礎数値解析法",,,"朝倉書店（株）",,,"pp. ISBN978-4-254-11635-9",2007,Mar.
"I Made Miasa,岸本 豪太,大熊 政明","Micro-Perforated Panel Absorber Composed of Surface Panel having Multiple sizes of Perforations and Back Cavity Partition Perforated Plate",,"CD-ROM Proceedings of Inter-noise 2007",,,,,2007,
"大熊政明,ROBERTKLOEPPER,石塚尚子","剛体特性，動特性，特性行列の関係に関する一考察",,"日本機械学会機械力学計測制御部門講演会D&D2007 CD-ROM講演論文集",,,,,2007,
"MASAAKI OKUMA","Measurement of Rigid Body Inertia Parameters by Generation of a 7th Quasi-Rigid Vibration Mode",,"日本機械学会機械力学計測制御部門講演会D&D2007 CD-ROM講演論文集",,,,,2007,
"MASAAKI OKUMA","Squeal Noise Prediction in Dry Contact Sliding Systems by Means of Experimental Spatial Matrix Identification",,"日本機械学会機械力学計測制御部門講演会D&D2007 CD-ROM講演論文集",,,,,2007,
"Meifal Rusli,Masaaki Okuma","Effect of Surface Topography on Mode-Coupling Model of Dry Contact Sliding Systems","1st International Conference of Vibro-Impact Systems",,,"Vol. *",,,2006,July
"Masaaki Okuma,Minoru Yoshida,Takeshi Nakahara","A New Evolutionary Optimization Method with an Example of a Connecting-rod Model",,"CD-ROM Proceedings of 13th International Congress on Sound and Vibration",,"Vol. *",,,2006,July
"Tetsuya Otsuka,Takeshi Okada,Tetsuro Ikeno,Kazuyuki Shiomi,Masaaki Okuma","Force Identification of an Outboard Engine by Experimental Means of Linear Structural Modeling and Equivalent Force Transformation","1st International Conference of Vibro-Impact Systems",,,"Vol. *",,,2006,July
"Miasa I Made,Okuma Masaaki,Kishimoto Gota","Study on sound absorption of a multi-leaf microperforated panel",,"CD-ROM Proceedings of ISMA2006",,"Vol. *",,,2006,
"Toshiyuki Uyama,Masaaki Okuma,Atsushi Oyama","Rigid Body Properties of An Actual Diesel Engine by Rigid Body Properties of An Actual Diesel Engine by Experimental Spatial Matrix Identification Method",,"CD-ROM Proceedings of ISMA2006, 2006",,"Vol. *",,,2006,
"大熊政明","コアリッションによる工学教育の相乗的改革（第１０報）―博士交流（2006",,"平成１９年度工学・工業教育研究講演会講演論文集，（社）日本工学教育協会",,,,"pp. 464-465",2006,
"中原健志,大熊政明","ボルト緩み検知用薄板形センサの小型化",,"日本機械学会論文集C編",,"Vol. 71","No. 721","pp. 2980-2987",2006,
"中原健志,大宅由佑,大熊政明","ボルト緩み検知用薄板形センサの初期緩み感度向上に関する研究",,"日本機械学会論文集C編",,"Vol. 71","No. 719","pp. 2232-2239",2006,
"岡田毅,池野哲朗,塩見和之,戸松太郎,大熊政明","実験モード解析を用いた大型船外機のエンジンマウント剛性値測定方法",,"日本機械学会機械力学計測制御部門講演会D&D2006 CD-ROM講演論文集",,"Vol. *",,,2006,
"大熊政明,塩見和之,岡田毅,池野哲朗","実験的特性行列同定法による船外機のモデル化",,"日本機械学会機械力学計測制御部門講演会D&D2006 CD-ROM講演論文集",,"Vol. *",,,2006,
"中原健志,大熊政明","ボルト緩み検知用スリット付き薄板形センサに関する研究",,"日本機械学会機械力学計測制御部門講演会D&D2006 CD-ROM講演論文集",,"Vol. *",,,2006,
"Mulyadi Bur,Masaaki Okuma,Jhon Malta,Feblil Huda","Experimental Study of Vibration on Rotor System due to Unbalance Mass and Misallignment",,"Journal Poros",,"Vol. 8","No. 4",,2005,Oct.
"大熊政明","新・工業力学?例解から応用への展開?",,,"数理工学社",,,,2005,July
"Taro Tomatsu,Tetsuya Otsuka,Masaaki Okuma,Takeshi Okada,Tetsuro Ikeno,Kazuyuki Shiomi","Sound-Radiation Analysis for Boat Hull Based on Hammering Test and BEM",,"CD-ROM Proceedings DETC2005-84628 2005 ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference",,"Vol. *",,,2005,
"Taro Tomatsu,Takeshi Okada,Tetsuro Ikeno,Kazuyuki Shiomi,Masaaki Okuma","A Method to Identify the Stiffness of Engine Mounts using Experimental Modal Analysis",,"CD-ROM Proceedings DETC2005-84629 2005 ASME International Design Engineering Technical Conference &Computers and Information in Engineering Conference",,"Vol. *",,,2005,
"Masaaki Okuma","A Basic Study on CAE for Cruising Boat’s Vibration and Noise",,"CD-ROM proceedings of ICoVIS International Workshop on “Shock and Vibration Protection of Equipment and Operators in Harsh Environmental Condition”",,"Vol. *",,,2005,
"大熊政明","【基調講演】モード解析の温故知新講話",,"（社）自動車技術会 振動騒音部門シンポジウム 講演論文集",,"Vol. 14-05","No. 20054933","pp. 1-6",2005,
"中原健志,大宅由佑,大熊政明","薄板型センサによるボルトゆるみモニタリング",,,,"Vol. 71","No. 710","pp. 2983-2988",2005,
"戸松太郎,大塚哲哉,大熊政明,岡田毅,池野哲朗,塩見和之","振動試験と境界要素法による艇体からの放射騒音解析",,"日本機械学会機械力学計測制御部門講演会D&D2005 CD-ROM講演論文集",,"Vol. *",,,2005,
"大熊政明,早川義一,久保司郎,扇澤敏明,山田明,足立忠晴","コアリッションによる工学教育の相乗的改革（第２報）?博士交流?",,"（社）日本工学教育協会 平成１７年度工学・工業教育研究講演会講演論文集",,,,"pp. 84-85",2005,
"戸松太郎,岡田 毅,池野哲朗,塩見和之,大熊政明","実験的モード解析を用いたエンジンマウント剛性値測定方法",,"日本機械学会論文集Ｃ編",,"Vol. 71","No. 709","pp. 2715-2722",2005,
"Mulyadi Bur,Masaaki Okuma,Jhon Malta,Feblil Huda","Experimental Study of Vibration on Rotor System due to Unbalance Mass and Misallignment",,"Journal Poros",,"Vol. 8","No. 4",,2005,
"中原健志,大宅由佑,大熊政明","ボルト緩み検知用薄板形センサの感度向上に関する研究",,"日本機械学会機械力学計測制御部門講演会D&D2005 CD-ROM講演論文集",,"Vol. *",,,2005,
"Rusli Meifal,大熊政明,中原健志","実構造物におけるカーブフィット精度向上のための重み関数の組合せに関する研究",,"日本機械学会機械力学計測制御部門講演会D&D2005 CD-ROM講演論文集",,"Vol. *",,,2005,
"大熊政明,全珍詠,那倉祐介,中原健志","パネル放射騒音低減のための薄い折り曲げと圧電シャント回路の最適化",,"日本機械学会機械力学計測制御部門講演会D&D2005 CD-ROM講演論文集",,"Vol. *",,,2005,
"大塚哲哉 初見 典彦 大熊 政明","振動エネルギーからの発電システムの開発",,"日本機械学会機械力学計測制御部門講演会D&D2003 CD-ROM講演論文集",,,,,2004,
"戸松太郎,大熊政明","実験的特性行列同定法のスパース行列化に関する研究",,"日本機械学会関東支部第10期総会講演会講演論文集",,,,"pp. 263-264",2004,
"Yesim Sabah,Masaaki Okuma,Minoru Okubo","Implementation of Signle and Multiple Adoptive Step Size Algorithm to ANC",,"Proceedings of IMECE04 2004 ASME International Mechanical Engineering Congress",,,,,2004,
"Masaaki Okuma,Minoru Yoshida","A New Evolutionary Optimization Method Integrating Both Structural Statics and Dynamics",,"The Proceedings of The 3rd China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Ssytems ",,,,"pp. 385-390",2004,
"Masaaki Okuma","Evolutionary Structural Optimization on Strength, Stiffness and Dynamics",,"CD-ROM proceedings of 6th World Congress on Computational Mechanics in conjunction with Second Asian-Pacific Congress on Computational Mechanics, ",,"Vol. Springer",,"pp. 512-9",2004,
"Jin-Young Jeon,Masaaki Okuma,Yusuke Nakura","An Optimum Bending Groove Design of Panel to Minimize Noise Power",,"CD-ROM proceedings of 7th Biennial ASME Conference on Engineering Systems Design and Analysis",,,,,2004,
"Masaaki Okuma,Guillaume Marie Germain","Marionette posture analysis by particle swarm optimization algorithm",,"Multi-body Dynamics (Monitoring and Simulation Techniques-III), Professional Engineering",,,,,2004,
"Masaaki Okuma,Jin-Young Jeon","Acoustic Radiation Optimization Using the Particle Swarm Optimization Algorithm",,"CD-ROM proceedings of the International Congress of Sound and Vibration 2004",,,,,2004,
"Jin-Young Jeon,Masaaki Okuma","Acoustic Radiation Optimization Using the Particle Swarm Optimization Algorithm",,"JSME International Journal Series C",,"Vol. 47","No. 2","pp. 590-567",2004,
"藤井賢一 大熊政明","トンボの羽構造に関する構造動力学的研究",,"日本機械学会機械力学計測制御部門講演会D&D2003 CD-ROM講演論文集",,,,,2004,
"全 珍詠 大熊政明 那倉祐介","騒音低減を目的としたパネルの曲げ溝の最適設計",,"日本機械学会機械力学計測制御部門講演会D&D2003 CD-ROM講演論文集",,,,,2004,
"大熊政明※１ 早川義一※2 田中一義※3 渡辺征夫※4 能登敏幸※5 島田 彌※6 *1東京工業大学大学院理工学研究科機械宇宙システム専攻 *2名古屋大学大学院工","工学教育プログラム基準強化活動（第2報―大学院教育課程―）",,"（社）日本工学教育協会 平成16年度工学・工業教育研究講演会講演論文集",,,,"pp. 661-662",2004,
"大熊政明","薄板の振動特性を利用したボルトゆるみ検出",,"日本機械学会論文集C編",,"Vol. 70","No. 694","pp. 1743-1749",2004,
"Takeshi Nakahara,Masaaki Yamamoto,Yusuke Ohya,Masaaki Okuma","Bolt loosening detection using vibration characteristics of thin plate with piezoelectric elements",,"Proceedings of SPIE Vol.5391 , Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems",,"Vol. 5391",,,2004,
"Woo Young Kim,Takeshi Nakahara,Masaaki Okuma","An Evolutionary Optimization Method for Designing Three-Dimensional Structures",,"Proceedings of the 5th World Congress on Structural and Multi-disciplinary Optimization",,,,,2003,
"中原健志,山本正晃,大宅由佑,大熊政明","薄板の振動特性を利用したボルトゆるみ検出",,"日本機械学会機械力学計測制御部門講演会D&D2003",,,,,2003,
"大熊政明,天野淳之,中原健志","３Dデジタイザーと実験データ利用による高精度有限要素モデルの作成法",,"日本機械学会機械力学計測制御部門講演会D&D2003",,,,,2003,
"金 祐永,中原健志,大熊政明","三次元構造物の自動最適化のための生長変形法の開発 （第2報 動力学最適化の基本アルゴリズムの開発と基礎検討）",,"日本計算工学会インターネット論文集",,,,,2003,
"Naoto Fuse,Masaaki Okuma,Jin-Young Jeon,Takeshi Nakahara","A Study on Noise Reduction of Vibrating Plate by its Curvature Optimum Design and Optimum Rib Attachment",,"CD-ROM proceedings of The 10th Intenational Conference on Sound and Vibration",,,,"pp. 3917-3924",2003,
"金祐永,橋元慶太,中原健志,大熊政明","特性最適化のための生長変形法の開発",,"日本機械学会機械力学計測制御部門講演会D＆D２００２CD-ROM論文集",,,,"pp. 6",2002,
"全珍詠,戸松太郎,大熊政明","較正の重要性",,"日本機械学会機械力学計測制御部門講演会D＆D２００２CD-ROM論文集",,,,"pp. 5",2002,
"金祐永,中原健志,大熊政明","三次元構造物の自動最適化のための生長変形法の開発 （第１報，基本アルゴリズムの開発と静力学最適化の基礎検討）",,"日本計算学会",,,"No. 20020019",,2002,
"大熊政明,田中慎一郎,中原健志","モード解析による構造動力学の観点からのトンボの羽の基礎研究",,"日本機械学会機械力学計測制御部門講演会D＆D２００２CD-ROM論文集",,,,"pp. 6",2002,
"MASAAKI OKUMA","Experimental methods for identifying spatial matrices and rigid body properties",,"Recent Research and Development of Sound and Vibration",,,,"pp. 133-147",2002,
"Mulyadi Bur,Masaaki Okuma,Meifal Rusli,Lovely Son","Comparison Study of Dynamical Structural Indentification in Time and Frequency Domain ",,"Proceedings of Conference name: Seminar on Science and Technology 2002",,,,,2002,
"松岡久祥,大熊政明,安藤正登","円筒形構造物に対する定常波離散化による新しい実験的モード特性同定法およびタイヤのモデル化への適用",,"日本機械学会論文集Ｃ編",,"Vol. 68","No. 675","pp. 3322-3328",2002,
"金祐永,中原健志,大熊政明","三次元構造物の自動最適化のための成長変形法の開発",,"日本機械学会第５回最適化シンポジウム講演論文集",,"Vol. 2","No. 3","pp. 101-106",2002,
"Taro Tomatsu,Modak S.,Masaaki Okuma,Kundra T.","dentification and prediction of F-shape structure dynamics by spatial matrix identification method",,"CD-ROM proceedings of ISMA2002",,,,,2002,
"吉田 実,金祐永,大熊政明","新しい成長変形型最適化設計法とピストンクランク機構モデルへの適用事例",,"日本機械学会第５回最適化シンポジウム講演論文集",,"Vol. 2","No. 3","pp. 101-106",2002,
"Hisayoshi Matsuoka,Masaaki Okuma","A new experimental modal parameter estimation method for cylindrical structures by standing wave decomposition and application to tire modeling",,"CD-ROM proceedings of ISMA2002",,,,,2002,
"Taro Tomatsu,Masaaki Okuma,Tetsuya Sakai","Experimental Estimation of Rigid Body Properties of Heavy Structures Using Only SIMO FRFs",,"CD-ROM proceedings of ASME 6th Biennial Conference on Engineering Systems Design and Analysis",,,,,2002,
"MASAAKI OKUMA","Experimental Spatial Matrix Identification and a Consideration of the Relationship between the Uniqueness of Solution and the Practical Implementation",,"International Conference Proceedings of Experimental and Theoretical Mechanics 2002",,,,"pp. 190-197",2002,
"中原健志,山本正晃,大熊政明","圧電素子による高周波域での自己コンプライアンス計測",,"日本機械学会機械力学計測制御部門講演会D＆D２００２CD-ROM論文集",,,,"pp. 5",2002,
"Masaaki Okuma,Ward Heylen,Hisayoshi Matsuoka,Paul Sas","Identification and Prediction of Frame Structure Dynamics by Spatial Matrix Identification Method",,"Transaction of ASME, Journal of Acoustics and Vibration",,,"No. 123","pp. 390-394",2001,
"Masaaki Okuma,Mutsumi Ozaki","A Basic Research on Engineering Sound Source Localization System Imitating Human Auditory Mechanism",,"Proceedings of the 8th International Congress of Sound and Vibration",,,,"pp. 933-940",2001,
"Hisayoshi Matsuoka,Masaaki Okuma","A Method for Determination of A Set of Spatial Matrices from Modal Parameters and the Effectiveness",,"Proceedings of the 8th International Congress of Sound and Vibration",,,,"pp. 1933-1940",2001,
"中原健志,大熊政明","振動特性計測による構造物欠陥同定に関する実験的一考察",,"日本機械学会機械学力計測制御部門講演会論文集、CD-ROM論文集",,,,,2001,
"Masaaki Okuma,Tadashi Hayashi,Yoshifumi Hanamura,Hiroshi Takata","Application of Experimental Spatial Matrix Identification to An Actual Vehicle Chassis",,"Proceedings of the 9th International Symposium on Dynamic Problems of Mechanics",,,,"pp. 413-418",2001,
"中原健志,大熊政明","機械構造物の実時間状態監視法の開発に関する研究 （第1報、定常稼動状態での周波数応答関数計測法）",,"日本機械学会論文集Ｃ編",,"Vol. 67","No. 660","pp. 2476-2483",2001,
"松岡久祥,大熊政明","モード特性による特性行列算出のの一手法",,"日本機械学会論文集Ｃ編",,"Vol. 67","No. 655","pp. 648-652",2001,
"M. Okuma,H. Sakuma,K. Hashidume","An Evolutionary Optimization Method for Structural Dynamics (To Optimize the Structural Components of Super Mechano-systems)",,"Proc. of 5th International Symposium on Artificial Life and Robotics",,"Vol. 2",,"pp. 515-518",2000,
"大熊政明（分担）","現場実務者と設計者のための「実用振動・騒音制御ハンドブック」",,"エヌエスティー","エヌエスティー",,,"pp. 158-169",2000,
"大熊政明","制振制御のためのモード解析",,"日本音響学会誌","日本音響学会誌","Vol. 56","No. 10","pp. 727-733",2000,
"Masaaki Okuma,Ward Heylen,Hisayoshi Matsuoka,Paul Sas","Identification and Prediction of Frame Structure Dynamics by Spatial Matrix Identification Method",," Proceedings of 2000 ASME International Mechanical Engineering Congress and Exposition, Dynamics, Acoustics and Simulations",,"Vol. 108","No. 68","pp. 99-105",2000,
"Masaaki Okuma,Ward Heylen,Paul Sas","Identification of rigid body properties of 3-D frame structure by MCK identification method,",,"CD-ROM Proceedings of ISMA25",,,,,2000,
"佐々木真吾,岩附信行,高橋秀智,大熊政明","固有振動の機能化に関する基礎的研究（単純な往復搬送システムの設計と検証）",,"日本機械学会機械力学計測制御部門CD-ROM講演論文集",,,,,2000,
"金祐永,大熊政明","振動解析のための適切な有限要素分割法に関する研究 （アイソパラメトリック立方体要素によるモデル化）",,"日本機械学会機械力学計測制御部門CD-ROM講演論文集",,,,,2000,
"大熊政明,橋詰賢二,佐久間毅","成長最適化法を用いた構造物の動設計",,"日本機械学会機械力学計測制御部門CD-ROM講演論文集",,,,,2000,
"松岡久祥,大熊政明","モード特性による特性行列算出とその有効性",,"日本機械学会機械力学計測制御部門CD-ROM講演論文集",,,,,2000,
"大熊政明,Ward Heylen,Paul Sas","MCK同定法による３次元構造物の剛体特性の同定",,"日本機械学会機械力学計測制御部門CD-ROM講演論文集",,,,,2000,
"金祐永,松岡久祥,大熊政明","建築・土木大型構造物計測のための非固定型レーザー振動計の開発",,"日本機械学会北陸信越支部第37期総会講演会講演論文集",,,,"pp. 25-26",2000,
"Masaaki Okuma,Qinhzong Shi,Tatsuya Oho","Develpment of Experimental Spatial Matrix Identification Method ( Presentation of Current Theory and Basic Develpment of Experimental Spatial Matrix Identification Method)",,"Journal of Sound and Vibration",,"Vol. 219","No. 1","pp. 5-22",1999,
"大熊政明","モード解析ハンドブック",,"コロナ社","コロナ社",,,,1999,
"林 禎,花村良文,高田博,大熊政明","実車シャシーへの実験的特性行列同定法の適用",,"日本機械学会論文集Ｃ編",,"Vol. 65","No. 631","pp. 895-901",1999,
"Masaaki Okuma,Tatsuya Oho","Development of experimental spatial matrix identification method( Basic studies of the identification )",,"Proceedings of the 23rd International Symposium of Modal Analysis (ISMA23)",,"Vol. 1",,"pp. 377-384",1998,
"Masaaki Okuma,Tatsuya Oho","Experimental Spatial Matrix Identification As A Practical Inverse Problem in Mechanics",,"Proceedings of ASME International Symposium on Computational Methods for Solution of Inverse Problems in Mechanics",,"Vol. 228",,"pp. 73-79",1998,
"Masaaki Okuma,Ryota Momose,Hiroshi Takata","A Study on Applicability of Experimental Spatial Matrix Identification Method for Simulation of Flexible Link Systems",,"Proceedings of the 4th Movic",,"Vol. 1",,"pp. .285-290",1998,
"Masaaki Okuma,Qinzhong Shi","Identification of the Principal Rigid Body Modes Under Free-Free Boundary Condition",,"Transactions of ASME, Journal of Vibration and Acoustics",,"Vol. 119","No. 3","pp. 341-345",1997,
"大熊政明,百瀬良太","Estimation of Modal Damping Ratios from Mode Indicator Function",,"Transactions of the Japan Society of Mechanical Engineers.",,"Vol. 63","No. 616","pp. 4166-4170",1997,
"大熊政明,施勤忠実,於保辰也","実験的特性行列同定法の開発(開発理論と基礎的検証)",,"日本機械学会論文集C編",,"Vol. 63","No. 616","pp. 4171-4178",1997,
"大熊政明,佐久間広毅,百瀬良太","音源定位に関する聴覚情報処理メカニズムの工学的研究(水平2.5゜分解能の方向定位)",,"日本機械学会機械力学計測制御部門講演論文集",,"Vol. 97","No. 10B","pp. 191-194",1997,
"Masaaki Okuma,QINZHONG SHI","Modeling and Identification of Vibration Damping Composite Steel by Experimental MCK Identification Method","ISMA21 Leuven Conference","Proceedings of ISMA21 Leuven Conference",,,,"pp. 1137-1148",1996,Sept.
"大熊政明,吉野雅彦,大竹尚登,持丸義弘","よくわかる工業力学(共著)",,"培風館","培風館",,,,1996,
"大熊政明,尾島宏一,森伸介","音源定位に関する聴覚情報処理メカニズムの工学的研究(通常室内空間の複数音源の定位に関する基礎検討)",,"日本機械学会第73期通常総会講演会講演論文集",,"Vol. 96","No. 1(IV)","pp. 249-250",1996,
"Masaaki Okuma,Qinzhong Shi","Identification of the Principal Rigid Body Modes Under Free-Free Boundary Condition",,"Proceedings of ASME/JSME PVP95 Conference",,"Vol. PVP-309",,"pp. 129-134",1995,
"MASAAKI OKUMA","Identification of the Principal Rigid Body Modes Under Free-Free Boundary Condition",,"Transaction of JSME",,"Vol. 96","No. 1(IV)","pp. 2888-2894",1995,
"大熊政明,安川 潔,半田文隆","特性行列の実験的決定による系の固定(第9報.物理的モデル化制約条件の提案)",,"日本機械学会論文集C編",,"Vol. 61","No. 584C","pp. 1411-1416",1995,
"大熊政明,安川 潔,半田文隆","特性行列の実験的決定による系の同定(第9報。物理的モデル化制約条件の提案)",,"日本機械学会論文集C編",,"Vol. 61","No. 584","pp. 1411-1416",1995,
"大熊政明,前野敦,孫国一,長松昭男","振動解析における適切な有限要素分割法に関する研究(第2報、一般三角形要素についてのデータベース)",,"日本機械学会論文集C編",,"Vol. 60","No. 572","pp. 1144-1150",1994,
"大熊政明,片岡啓,末吉雅吉","音源定位に関する聴覚情報処理メカニズムの工学的研究(単音源、前後定位の識別に関する基礎的研究)",,"日本機械学会機械力学計測制御部門講演論文集",,"Vol. 940","No. 26(I)","pp. 201-204",1994,
"MASAAKI OKUMA","Correction of Finite Element Models Using Experimental Modal Data for Vibration Analysis",,"The International Journal of Applied Finite Elements and Computer Aided Engineering",,"Vol. 14","No. 2-3","pp. 153-162",1993,
"K.Sohn,S.Honda,M.Okuma,T.Ishii,A.Nagamatsu","Basic Research on the Vibration and Noise of Internal Combustion Engines (Vibration Analysis and Prediction of Actual Responses on the Whole Structure",,"JSME International Journal",,"Vol. 36","No. 4","pp. 413-420",1993,
"中村正信,山口正勝,大熊政明","An Improved Force-Response Window Function for Impact Vibration Testing",,"日本機械学会論文集",,"Vol. 59","No. 562","pp. 1672-1677",1993,
"MASAAKI OKUMA","Experimental Identification of Mechanical Structures with Spatial Matrlces (8th report, Introduction of Modelling Constraints)",,"日本機械学会論文集",,"Vol. 57","No. 541C",,1991,
"MASAAKI OKUMA","Basic Research on the Vibration and Noise of Internal Combustion Engines(5th report, Vibration Analysis and Prediction of Actual Responses on the Whole Structure)",,"日本機械学会論文集",,"Vol. 57","No. 541C",,1991,
"MASAAKI OKUMA","Studies of Appropriate Finite Element Modelling For Vibration Analysis (First report)",,"日本機械学会論文集",,"Vol. 57","No. 544C",,1991,
"MASAAKI OKUMA","Correction of Finite Element Models Using Experimental Modal Data",,"日本機械学会論文集",,"Vol. 57",,"pp. 537C",1991,
"長松昭男,大熊政明","部分構造合成法(共著)",,"培風館","培風館",,,,1991,
"大熊政明","特性行列の実験的決定による系の同定(第7報、実用的方法の提案)",,"日本機械学会論文集",,"Vol. 54",,"pp. 507C",1988,
"大熊政明","共振点と反共振点の感度を用いた構造物の最適化方法",,"日本機械学会論文集",,"Vol. 54",,"pp. 505C",1988,
"MASAAKI OKUMA","Technique of Structural Dynamic Optimization (First report, Use of Mathematical Pseudo Inverse Method and Substructure Synthesis Method)",,"Transaction of JSME",,"Vol. 54",,"pp. 504C",1988,
"大熊政明","部分構造合成法による振動解析",,,,,,,1987,Mar.
"大熊政明","多自由度系の等価質量同定法",,"日本機械学会論文集",,"Vol. 53",,"pp. 485C",1987,
"大熊政明","多重区分モード合成法による振動解析",,"日本機械学会論文集",,"Vol. 49",,"pp. 446C",1983,
"MASAAKI OKUMA","区分モード合成法による振動解析",,,,,,,1981,