"Maho Watanabe,KAZUHIRO YOSHIDA,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Three-dimensional AC electroosmotic micropump with high power density",,"Journal of Micromechanics and Microengineering",,"Vol. 33",,"  105008 (12pp)",2023,Aug.
"金 俊完,横田 眞一","MEMS技術を用いたECFジェット用の電極対",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 105-108",2022,Apr.
"横田 眞一,金 俊完","ECFマイクロポンプの高圧化の可能性について",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,"pp. 101-104",2022,Apr.
"吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","交流電気浸透を応用したマイクロポンプ",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 83-86",2022,Apr.
"吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","ERFを用いたマイクロアクチュエータシステム",,"機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書","一般社団法人 日本フルードパワーシステム学会",,,"pp. 11-14",2022,Apr.
"Zebing Mao,Tomonobu Nagaoka,Shinichi Yokota,Joon-wan Kim","Soft fiber-reinforced bending finger with three chambers actuated by ECF (electro-conjugate fluid) pumps",,"Sensors and Actuators A: Physical",,"volume 310","Number 1","pp. 112034",2020,Aug.
"Dong Han,Yoshiho Yamada,Shinichi Yokota,Joon-wan Kim","Multilayer Fabrication of Micromolding and Electroforming with the Planarization of Grinding for High-Aspect-Ratio Microelectrodes in Electro-conjugate Fluid (ECF) Micropumps",,"International Journal of Precision Engineering and Manufacturing",,"Vol. 21","No. 5","pp. 927?936",2020,May
"Joon-Wan Kim,Kazuhiro Yoshida,Toru Ide,Shinichi Yokota","Fabrication, Experiment, and Simulation of a Flexible Microvalve-Integrated Microarm for Microgrippers Using Electrorheological Fluid",,"Journal of Robotics and Mechatronics",,"Vol. 32","No. 2","pp. 333-343",2020,Apr.
"Dong Han,Haibo Wang,Shinichi Yokota,Joon-Wan Kim","Configurations of triangular prism and slit electrode pairs to enhance the performance of electro-conjugate fluid micropumps",,"Journal of Micromechanics and Microengineering",,"Volume 30","Number 2","  025007",2020,Jan.
"Joon-wan Kim,Yoshiho Yamada,Shinichi Yokota","Micro ECF (electro-conjugate fluid) hydraulic power sources based on the modular design of TPSEs (triangular prism and slit electrode pairs)",,"The International Journal of Advanced Manufacturing Technology",,"Volume 106",,"Page 627-639",2019,Nov.
"Joon-wan Kim,Yusuke Tanabe,Shinichi Yokota","Comprehending Electro-conjugate Fluid (ECF) Jets by Using the Onsager Effect",,"Sensors and Actuators A: Physical",,"Vol. 295","No. 15","pp. 266-273",2019,June
"Tomonobu Nagaoka,Zebing Mao,Kenjiro Takemura,Shinichi Yokota,Joon-wan Kim","ECF (electro-conjugate fluid) finger with bidirectional motion and its application to a flexible hand",,"Smart Materials and Structures",,"Volume 28","Number 2","Page 025032",2018,Nov.
"Joon-wan Kim,Yusuke Tanabe,Shinichi Yokota","Modeling Electro-conjugate Fluid (ECF) Jet by Using Onsager Effect","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)","International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018)",,,,"p. 82",2018,Sept.
"中村 栄竣,田中豊,金城 拓,枝村一弥,横田眞一","機能性流体パワーを用いた小形吸着アクチュエータ","平成30年春季フルードパワーシステム講演会","平成30年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 44-46",2018,May
"Dong Han,Yong Xia,Shinichi Yokota,Joon-wan Kim","UV-LIGA technique by back UV exposure with self-alignment for ECF (electro-conjugate fluid) micropumps",,"Journal of Micromechanics and Microengineering",,"Volume 27","Number 12","Page 125008",2017,Oct.
"KAZUHIRO YOSHIDA,tomoyuki satou,Sang In EOM,Joon-wan KIM,SHINICHI YOKOTA","A study on an AC electroosmotic micropump using a square pole - slit electrode array",,"Sensors and Actuators A: Physical",,"Vol. 265",,"pp. 152-160",2017,Aug.
"Dong Han,Hongri Gu,Joon-wan Kim,Shinichi Yokota","A bio-inspired 3D-printed hybrid finger with integrated ECF (electro-conjugate fluid) micropumps",,"Sensors and Actuators A: Physical",,"Vol. 257","No. 15","pp. 47-57",2017,Apr.
"Jung-Ho Park,Young-Bog Ham,So-Nam Yun,KAZUHIRO YOSHIDA,SHINICHI YOKOTA","Thumbnail-sized Powerful Piezoelectric Micropumps as a Fluid Power Source","BIT's 3rd Annual World Congress of Smart Materials (WCSM-2017)","Conf. Proc. of BIT's 3rd Annual World Congress of Smart Materials (WCSM-2017)",,,,,2017,Mar.
"Dong HAN,Shinichi Yokota,Kazuya Edamura,Joon-wan KIM","Dynamic Characteristics of Hybrid 3D-printed Mini Finger Embedding ECF (Electro-conjugate Fluid) Micropump","20th International Conference  on Mechatronics  Technology（ICMT2016）","20th International Conference  on Mechatronics  Technology（ICMT2016）",,,,"p. 89-90",2016,Oct.
"Joon-Wan Kim,Thanh V.X.Nguyen,Kazuya Edamura,Shinichi Yokota","Triangular Prism and Slit Electrode Pair for ECF Jetting Fabricated by Thick Micromold and Electroforming as Micro Hydraulic Pressure Source for Soft Microrobots",,"International Journal of Automation Technology","富士技術出版株式会社ＩＪＡＴ編集部","Vol. 10","No. 4","p. 470-478",2016,July
"嵯峨由彬,金俊完,横田眞一,枝村一弥","ECFマイクロ液圧源を内蔵した偏心チューブ形マイクロハンドに関する研究","ロボティクス・メカトロニクス講演会2016 in Yokohama","ロボティクス・メカトロニクス講演会2016 講演概要集",,,"No. 16-2","pp. 195",2016,June
"Joon-wan Kim,Kazuyoshi  Kondo,Shinichi  Yokota,Kazuya Edamura","MEMS-Fabricated Needle & Ring Electrode Pair (NRE) and its Application to the Braille Cell","The 4th Japan-China Joint Workshop on Fluid Power","Proceedins of The 4th Japan-China Joint Workshop on Fluid Power","The Japan Fluid Power System Society(JFPS)",,,"pp. 71-73",2016,May
"HAN DONG,金 俊完,横田 眞一,枝村 一弥","ハイブリッド3DプリンタによるミニサイズECFフィンガの動特性に関する研究","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 30-32",2016,May
"嚴 祥仁,宝来 亮汰,吉田 和弘,横田 眞一","積層ダイアフラム形DEアクチュエータを用いたマイクロポンプに関する基礎的研究","平成28年春季フルードパワーシステム講演会","平成28年春季フルードパワーシステム講演会 講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 33-35",2016,May
"Sang In EOM,Hiroki Masuda,SHINICHI YOKOTA,KAZUHIRO YOSHIDA,Kazuya Edamura","An ECF-jet driven mini hydraulic piston actuator",,"Sensors and Actuators A",,"Vol. 247",,"pp. 164-171",2016,May
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Joon-wan KIM,Sang In EOM,SHINICHI YOKOTA","An MEMS-based multiple electro-rheological bending actuator system with an alternating pressure source",,"Sensors and Actuators A",,"Vol. 245",,"pp. 68-75",2016,Apr.
"金 俊完,中川 卓也,横田 眞一,枝村 一弥","ECF可変焦点形液体レンズの高速応答に関する研究","第16回 日本機械学会 機素潤滑設計部門講演会","第16回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人日本機械学会",,,"pp. 67-68",2016,Apr.
"松原 竜也,金 俊完,横田 眞一,枝村 一弥","ECFジェット駆動水溶液ポンピングシステムにおける流路への水の残留に関する研究","第16回機素潤滑設計部門講演会","第16回機素潤滑設計部門講演会 講演論文集",,,,"pp. 65-66",2016,Apr.
"Dong HAN,J.W. KIM,S.YOKOTA,E.EDAMURA","ECF MICROPUMP FABRICATED BY ELECTROFORMING WITH NOVEL SELF-ALIGNED MICRO-MOLDING TECHNOLOGY","The 15th International Conference on Micro and Nanotechnology for Power Generationand Energy Conversion Applications (PowerMEMS 2015)","Journal of Physics: Conference Series","IOP Publishing","Vol. 660","No. 1","pp. 012029",2015,Dec.
"Kazuhiro Yoshida,Souta Hara,Sang In Eom,Shinichi Yokota","A novel soft microgripper using divided-electrode type flexible ER valves",,"Bulletin of the JSME, Mechanical Engineering Journal",,"Vol. 2","No. 6","  Paper No. 15-00340",2015,Dec.
"韓冬,金俊完,横田眞一,枝村一弥","自己整合によるマイクロ鋳型を用いたECFマイクロポンプの提案","平成27年秋季フルードパワーシステム講演会","平成２７年秋季フルードパワーシステム講演会 講演論文集","日本フルードパワーシステム学会",,,"pp. 14-16",2015,Nov.
"Sang in Eom,Ryota Horai,Kazuhiro Yoshida,Shinichi Yokota","A Study on a Micropump Using Stacked Diaphragm-Type Dielectric Elastomer Actuators - Concept and Basic Investigations -","The 19th International Conference on Mechatronics Technology(ICMT2015)","Proceedings of the 19th International Conference on Mechatronics Technology（ICMT2015)",,,,"  C13",2015,Nov.
"Kazuhiro Yoshida,Maho Watanabe,Joon wan Kim,Sang in Eom,Shinichi Yokota","Characterization of an AC Electroosmotic Micropump Using Plate-Cylinder Electrode Array","The 19th International Conference on Mechatronics Technology(ICMT2015)","Proceedings of the 19th International Conference on Mechatronics Technology（ICMT2015)",,,,"  C10",2015,Nov.
"Joon-wan KIM,Seiya FURUKI,Shinichi YOKOTA,Kazuya EDAMURA","Study on increasing output power density in ECF micropumps","The KSFC 2015 Autumn Conference on Drive and Control International Session","Proceedings of The KSFC 2015 Autumn Conference on Drive and Control International Session",,,,"pp. 131-134",2015,Oct.
"松原竜也,金 俊完,横田眞一,枝村一弥","ディフューザ形状の非対称流路とECFマイクロポンプを統合した水溶液ポンピングシステムの開発","山梨講演会2015","山梨講演会講演論文集",,,"No. 150-3","pp. 84-85",2015,Oct.
"中川卓也,金 俊完,横田眞一,枝村一弥","可変焦点形液体レンズを駆動するECFマイクロポンプの検討","山梨講演会2015","山梨講演会講演論文集",,,"No. 150-3","pp. 82-83",2015,Oct.
"吉田和弘,笹山裕貴,嚴 祥仁,横田眞一","流体共振回路を用いた複数アクチュエータシステムのマイクロ化に関する研究","山梨講演会2015","山梨講演会講演論文集",,,"No. 150-3","pp. 86-87",2015,Oct.
"松原竜也,金俊完,横田眞一,枝村一弥","ECFジェット駆動ディフューザ形バルブレスマイクロポンプの提案","日本機械学会 2015年度年次大会","日本機械学会 2015年度年次大会DVD論文集【No.15-1】","一般社団法人 日本機械学会",,"No. 15-1",,2015,Sept.
"横田眞一,金俊完","ECFマイクロポンプの高圧化の可能性について",,"JFPS機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,,2015,Sept.
"金俊完,横田眞一","MEMS技術を用いたECFジェット用の電極対",,"JFPS機能性流体との融合化によるフルードパワーシステムの新展開に関する研究委員会 研究成果報告書",,,,,2015,Sept.
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Joon-wan KIM,Sang-In Eom,Shinichi Yokota","DEVELOPMENT OF A MEMS-BASED ELECTRO-RHEOLOGICAL MICROFINGER SYSTEM WITH AN ALTERNATING PRESSURE SOURCE","The 18th Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers 2015)","Proc.of the 18th Int. Conf. on Solid-State Sensors, Actuators and Microsystems (Transducers 2015)",,,,"pp. 823-826",2015,June
"金 俊完,三栗野 功大,横田 眞一,枝村 一弥","ECFと五角柱電極アレイを用いた強制液冷システム","平成27年春季フルードパワーシステム講演会","平成27年春季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 73-75",2015,May
"清水美咲,金俊完,横田眞一,枝村一弥","DRIEを用いた三角柱ｰスリット型電極対の製作によるECF効果に関する研究","日本設計工学会 2015年度春季大会研究発表講演会","日本設計工学会 2015年度春季大会研究発表講演会講演論文集","公益社団法人 日本設計工学会",,,"pp. 81-82",2015,May
"吉田 和弘,渡邊 真帆,金 俊完,嚴 祥仁,横田 眞一","平板?円筒電極アレイを用いた交流電気浸透マイクロポンプの開発","平成27年春季フルードパワーシステム講演会","平成27年春季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 67-69",2015,May
"Kazuhiro Yoshida,Satoshi Yamamoto,Sang In Eom,Shinichi Yokota","A Multiple-Microactuator System Using a High-Frequency Pressure Source",,"Sensors and Materials","MYU K.K.","Vol. 27","No. 4","pp. 317-328",2015,May
"小林 紀穂,飯島 佳樹,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体の旋回流を用いた液滴混合デバイスによる生体発光","平成27年春季フルードパワーシステム講演会","平成27年春季フルードパワーシステム講演会論文集","一般社団法人日本フルードパワーシステム学会",,,"pp. 61-63",2015,May
"Tatsuya Matsubara,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Proposal of Pumping Aqueous Solution Using ECF Micropump with Diffuser & Nozzle Mechanism","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 326-327(TH-PO-18)",2015,Apr.
"吉田和弘,横田眞一","滑らかな関節の動きを実現する材料：機能性流体の応用",,"パワーアシスト・ロボットに関する材料，電子機器，制御と実用化，その最新技術",,,,"pp. 134-140",2015,Apr.
"Yoshiki Iijima,Kyohei Hosoda,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Numerical Simulation of Electro-conjugation Fluid Flow Considering Electric Double Layer","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 466-467(FR-PO-32)",2015,Apr.
"Misaki Shimizu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Proposal of DRIE-Fabricated Silicon Electrode Pairs for ECF Micropumps","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 126-127(TH-D-1-6)",2015,Apr.
"Dong Han,Hongri Gu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","A Novel 3D-Printed Finger Integrated with ECF Micropump","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 124-125",2015,Apr.
"Tomoya Miyoshi,Kazuhiro Yoshida,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Fabrication of a MEMS-Based Electro-Rheological Microfinger System with an Alternating Pressure Source","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 476-477",2015,Apr.
"Kazuhiro Yoshida,Souta Hara,Sang In Eom,Shinichi Yokota","Development of a Soft Microgripper Using Divided-Electrode Type Flexible ER Valves","The 6th  International Conference on Manufacturing, Machine Design and Tribology","ICMDT2015 Proceedings",,,,"pp. 464-465",2015,Apr.
"Tomoya Miyoshi,KAZUHIRO YOSHIDA,Sang In EOM,SHINICHI YOKOTA","Proposal of a multiple ER microactuator system using an alternating pressure source",,"Sensors and Actuators A",,"Vol. 222",,"pp. 167-175",2014,Dec.
"吉田 和弘,金 俊完,横田 眞一","IFPEX2014?カレッジコーナーに見る最新技術?横田・吉田・金研究室",,"油空圧技術","日本工業出版","Vol. 53","No. 12","pp. 19-23",2014,Nov.
"Tomoya MIYOSHI,Kazuhiro YOSHIDA,Joon-wan KIM,Sang In EOM,Shinichi YOKOTA","FABRICATION OF A MEMS-BASED ER MICROGRIPPER WITH ALTERNATING-PRESSURE SOURCE","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014","The Japan Fluid Power System Society (JFPS)",,,"pp. 438-441",2014,Oct.
"吉田和弘,渡邊真帆,金俊完,嚴祥仁,横田眞一","平板−円筒電極対を用いた交流電気浸透マイクロポンプの特性評価","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 21-22",2014,Oct.
"Kazuhiro Yoshida,Satoshi Yamamoto,Sang In Eom,Shinichi Yokota","Proposal of a Multiple Microactuators System Using High Frequency Alternating-Pressure Source","The 18th International Conference on Mechatronics Technology","ICMT2014 The 18th International Conference on Mechatronics Technology",,,,"  ID69",2014,Oct.
"Kazuhiro Yoshida,Maho Watanabe,Joon-wan Kim,Sang In Eom,Shinichi Yokota","Development of a Novel AC Electroosmosis Micropump Using Plate-Cylinder Electrode pair","The 18th International Conference on Mechatronics Technology","ICMT2014 The 18th International Conference on Mechatronics Technology",,,,"  ID45",2014,Oct.
"Kazuyoshi Kondo,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Miniaturization of braille cells by utilizing ECF micro actuators","The 18th International Conference on Mechatronics Technology","ICMT2014 The 18th International Conference on Mechatronics Technology",,,,"  ID100",2014,Oct.
"Kazuhiro YOSHIDA,Noboru TSUKAMOTO,Joon-Wan KIM,Sang In EOM,Shinichi YOKOTA","CHARACTERISTICS OF MEMS-BASED DIVIDED ELECTRODE TYPE FLEXIBLE ELECTRO-RHEOLOGICAL VALVE","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014",,,,"pp. 435-437",2014,Oct.
"金俊完,三栗野功大,横田眞一,枝村一弥","MEMS技術による五角柱電極アレイ形ECFマイクロポンプ","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 19-20",2014,Oct.
"田邊勇典,金俊完,横田眞一,枝村一弥","オンサガー効果によるECFジェットのシミュレーション","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 15-16",2014,Oct.
"Hongri GU,Joon-wan KIM,Shinichi YOKOTA,Kazuya EDAMURA","3-TRIANGULAR PRISM ELECTRODES DESIGN FOR ELECTRO-CONJUGATE FLUID MICROPUMP","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014","The Japan Fluid Power System Society (JFPS)",,,"pp. 571-573",2014,Oct.
"Mika NARAKI,Kenjiro TAKEMURA,Shinichi YOKOTA,Kazuya EDAMURA","EFFECT OF ELECTRODE MATERIALS ON ELECTRO-CONJUGATE FLUID FLOW GENERATION","the 9th JFPS International Symposium on Fluid Power Matsue 2014","Proceedings of the 9th JFPS International Symposium on Fluid Power Matsue 2014","The Japan Fluid Power System Society (JFPS)",,,"pp. 447-451",2014,Oct.
"古木星哉,金俊完,横田眞一,枝村一弥","MEMS技術を用いた集積化によるECFマイクロポンプの高圧化","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 17-18",2014,Oct.
"近藤一由,金俊完,横田眞一,枝村一弥","点字表示セル用ECFマイクロアクチュエータ","山梨講演会2014","山梨講演会講演論文集","一般社団法人 日本機械学会関東支部",,"No. 140-3","pp. 13-14",2014,Oct.
"田中 豊,神戸 晴夏,林田 直之,横田 眞一,枝村 一弥","機能性流体による高機能メカトロシステムのデザイン","第24回フルードパワー国際見本市","第24回フルードパワー国際見本市  カレッジ研究発表展示コーナー論文集","（一社）日本フルードパワーシステム学会",,,"pp. 13-14",2014,Sept.
"吉田和弘,渡邊真帆,金俊完,嚴祥仁,横田眞一","平板─円筒電極を用いた交流電気浸透マイクロポンプの提案","日本機械学会年次大会2014","日本機械学会年次大会2014 DVD論文集","一般社団法人 日本機械学会",,"No. 14-1","  J1130103",2014,Sept.
"横田 眞一,金 俊完","マイクロ液圧と機能性流体ECFを用いたマイクロ液圧源","第24回フルードパワー国際見本市","第24回フルードパワー国際見本市  カレッジ研究発表展示コーナー論文集","（一社）日本フルードパワーシステム学会",,,"pp. 35-36",2014,Sept.
"Joon-wan Kim,Shinichi Yokota,Masaya Satoh,Kazuya Edamura","ECF MICROPUMP-INTEGRATED MICRO HAND BY MEMS TECHNOLOGY","Bath/ASME symposium on fluid power and motion control (FPMC 2014)","Proceedings of ASME/Bath 2014 symposium on fluid power and motion control (FPMC 2014)",,,,"pp. FPMC2014-7843(1-3)",2014,Sept.
"Shohei Uenoa,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Micro inchworm robot using electro-conjugate fluid",,"Sensors and Actuators A: Physical","Elsevier","Vol. 216",,"pp. 36-42",2014,Sept.
"Joon-wan Kim,Koudai Mikurino,Shinichi Yokota,Kazuya Edamura","ECF Micro Hydraulic Power Source by MEMS-Fabricated Pentagonal Prism Electrode Arrays","World Automation Congress 2014（WAC2014）","World Automation Congress 2014（WAC2014）",,,,"pp. 1569917659(1-3)",2014,Aug.
"Kazuhiro Yoshida,Noboru Tsukamoto,Joon-wan Kim,Shinichi Yokota","A study on a soft microgripper using MEMS-based divided electrode type flexible electro-rheological valves",,"Mechatronics","Elsevier",,,"pp. 1-7",2014,Aug.
"SHINICHI YOKOTA","A review on micropumps from the viewpoint of volumetric power density",,"Mechanical Engineering Reviews",,"Vol. 1","No. 2","p. DSM0014",2014,July
"Tomoya Miyoshi,Kazuhiro Yoshida,J.-W. Kim,S. Eom,S. Yokota","Development of a MEMS-Based ER Microgripper Using Alternating-Pressure Source","14th International Conference on New Actuators(ACTUATOR 2014)）","ACTUATOR14","MESSE BREMEN",,,"pp. 394-397",2014,June
"J.-W. Kim,Masaya Satoh,S. Yokota,K. Edamura","Micropump-Integrated Eccentric Tube Type Microactuator by Electro-Conjugate Fluid","14th International Conference on New Actuators (Actuator2014)","ACTUATOR14","MESSE BREMEN",,,"pp. 410-413",2014,June
"横田 眞一,佐藤 政哉,金 俊完,枝村 一弥","偏心チューブ形アクチュエータを用いたECFマイクロハンドの提案","平成26年春季フルードパワーシステム講演会","平成26年春季フルードパワーシステム講演会講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 70-72",2014,May
"小林 紀穂,倉科 佑太,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を用いた Droplet μTAS のための液滴混合テ?ハ?イスの開発",,"日本機械学会論文集",,"Vol. 80","No. 819",,2014,May
"金俊完,近藤一由,横田眞一,枝村一弥","点字表示器用ECF マイクロアクチュエータ","ロボティクス・メカトロニクス講演会2014 in Toyama","ロボティクス・メカトロニクス講演会2014 講演論文集",,,,"  3P2-G08",2014,May
"吉田 和弘,塚本 昇,金 俊完,嚴 祥仁,横田 眞一","MEMS技術を用いた電極分割形フレキシブルERマイクロバルブの開発","平成26年春季フルードパワーシステム講演会","平成26年春季フルードパワーシステム講演会講演論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 82-84",2014,May
"古木星哉,金俊完,横田眞一,枝村一弥","MEMS 技術を用いた集積化による高圧ECF マイクロポンプ","ロボティクス・メカトロニクス講演会2014 in Toyama","ロボティクス・メカトロニクス講演会2014 講演論文集",,,,"  3P2-H06",2014,May
"三栗野 功大,横田 眞一,金 俊完,枝村 一弥","五角柱電極アレイを用いた高出力ECF マイクロポンプの提案","ロボティクス・メカトロニクス講演会2014 in Toyama",,,,,"  3P2-I07",2014,May
"吉田 和弘,山本 悟史,嚴 祥仁,横田 眞一","高周波交流圧力源を用いた多自由度マイクロアクチュエータシステムの開発","第14回 日本機械学会 機素潤滑設計部門講演会","第14回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人 日本機械学会",,"No. 14-6","pp. 135-136",2014,Apr.
"三好 智也,吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","交流圧力源を用いたMEMS-ERマイクログリッパに関する研究","第14回 日本機械学会 機素潤滑設計部門講演会","第14回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人 日本機械学会",,"No. 14-6","pp. 35-36",2014,Apr.
"GU Hongri,金 俊完,横田 眞一,枝村 一弥","三角柱−テーパースリット電極対を用いたECFマイクロポンプ","第14回 日本機械学会 機素潤滑設計部門講演会","第14回 日本機械学会 機素潤滑設計部門講演会 講演論文集","一般社団法人 日本機械学会",,"No. 14-6","pp. 137-138",2014,Apr.
"吉田 和弘,嚴 祥仁,金 俊完,横田 眞一","機能性流体ERFを用いたマイクロアクチュエータシステム","第24回フルードパワー国際見本市","第24回フルードパワー国際見本市  カレッジ研究発表展示コーナー論文集","（一社）日本フルードパワーシステム学会",,,"pp. 37-38",2014,
"J.-w. Kim,satoru yamasita,S. Yokota,K. Edamura","Flexible Microgripper by Integrating Balloon-type Microactuators with Built-in ECF Micropumps","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-02-4",2013,Nov.
"S. Ueno,K. Takemura,S. Yokota,K. Edamura","An Inchworm Robot using Electro-conjugate Fluid","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-02-1",2013,Nov.
"上野将平,竹村研治郎,横田眞一,枝村 一弥","電界共役流体を用いたマイクロロボットハンド","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 109-111",2013,Nov.
"吉田和弘,山本悟,嚴祥仁,横田眞一","高周波交流圧力源を用いた多自由度マイクロアクチュエータシステムの開発（1 自由度システムの特解析）","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 64-66",2013,Nov.
"小林紀穂,竹村研治郎,横田眞一,枝村 一弥","電界共役流体を用いたDroplet μTAS のための液滴混合デバイス(複数液滴の自律的混合)","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 121-123",2013,Nov.
"佐藤政哉,金俊完,横田眞一,枝村 一弥","ECF マイクロポンプ組込偏心チューブ形マイクロアクチュエータに関する研究","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 112-114",2013,Nov.
"K. Nakagawa,T. Okada,K. Takemura,S. Yokota,K. Edamura","Understanding of Electro-conjugate Fluid Flow through Flow Visualization Experiments","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-02-1",2013,Nov.
"田中豊,横田眞一,枝村 一弥","機能性流体ECF を用いたマイクロポンプモジュール（小形化と高出力化のための一提案）","平成25年秋季フルードパワーシステム講演会","平成25年秋季フルードパワーシステム講演会 講演論文集",,,,"pp. 124-126",2013,Nov.
"K. Yoshida,N. Tsukamoto,J.-W. Kim,SHINICHI YOKOTA","A Divided Electrode Type Flexible Electro-Rheological Valve Fabricated by MEMS Technologies","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)","The 12th International Symposium on Fluid Control, Measurement and Visualization (FLUCOME 2013)",,,,"  OS5-01-1",2013,Nov.
"吉田 和弘,山本 悟史,嚴 祥仁,横田 眞一","高周波交流圧力源を用いた多自由度マイクロアクチュエータシステム","山梨講演会","山梨講演会講演論文集",,,"No. 130-3","pp. 28-29",2013,Oct.
"吉田 和弘,塚本 昇,金 俊完,横田 眞一","MEMS技術を用いた電極分割形フレキシブルERバルブ","山梨講演会","山梨講演会講演論文集",,,"No. 130-3","pp. 22-23",2013,Oct.
"吉田 和弘,三好 智也,嚴 祥仁,横田 眞一","交流圧力源を用いたMEMSベースERマイクロフィンガ","山梨講演会","山梨講演会講演論文集",,,"No. 130-3","pp. 24-25",2013,Oct.
"吉田 和弘,横田 眞一","?滑らかな関節の動きを実現するマテリアル?「ER流体、MR流体、電界共役流体」",,"マテリアルステージ","(株)技術情報教会","Vol. 13","No. 7","pp. 36-39",2013,Oct.
"Hongri Gu,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Study on Output Characteristics of downsized ECF micropump","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 283-285",2013,Oct.
"Sang In Eom,Shinichi Yokota,Joon-Wan Kim,Kazuhiro Yoshida,Kazuya Edamura","A silicone rubber bimorph actuator driven by bidirectional ECF jet generator","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 149-151",2013,Oct.
"Kazuhiro Yoshida,Tomoyuki Sato,Sang In Eom,Joon-Wan Kim,Shinichi Yokota","Development of an AC Electroosmotic Micropump Using Square Pole - Slit Electrodes","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 146-148",2013,Oct.
"Kazuhiro Yoshida,Noboru Tsukamoto,Joon-Wan Kim,Shinichi Yokota","A Microgripper Using MEMS-Based Divided Electrode Type Flexible Electro-Rheological Valves","17th International Conference on Mechatronics Technology (ICMT2013)","17th International Conference on Mechatronics Technology (ICMT2013) PROCEEDINGS",,,,"pp. 107-109",2013,Oct.
"佐藤 政哉,金 俊完,横田 眞一,枝村 一弥","ECFジェット駆動偏心チューブマイクロアクチュエータの特性評価","山梨講演","山梨講演会講演論文集",,,"No. 130-3","pp. 26-27",2013,Oct.
"嚴 祥仁,横田 眞一,金 俊完,枝村 一弥","両方向ECFマイクロポンプによるマイクロアクチュエータの駆動","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集",,"  J114023",,,2013,Sept.
"金 俊完,近藤 一由,横田 眞一,枝村 一弥","MEMS技術を用いた針?円筒スリット形ECFマイクロ液圧源","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集",,"  J114013",,,2013,Sept.
"吉田 和弘,渡邊 真帆,嚴 祥仁,横田 眞一","周波数可変交流圧力源を用いた多自由度マイクロアクチュエータシステム","日本機械学会 2013年度年次大会","日本機械学会2013年度年次大会 ＤＶＤ論文集",,,,"  J114025",2013,Sept.
"グ ホンリ,金 俊完,横田 眞一,枝村 一弥","電極対のマイクロ化によるECF効果に関する研究","日本機械学会 2013年度年次大会","2013年度年次大会 ＤＶＤ論文集 2013年9月7日発行",,"  J114012",,,2013,Sept.
"Yoko Abe,Kenjiro Takemura,SHINICHI YOKOTA,Kazuya Edamura","Droplet μTAS using Electro-conjugate Fluid - feedback position control of multiple droplets in flow channel matrix",,"Sensors and Actuators A: Physical",,"Vol. 198",,"pp. 1-7",2013,Aug.
"横田 眞一,吉田 和弘","電界共役流体（ECF)，電気粘性流体（ERF)の応用",,"日本ロボット学会誌","一般社団法人日本ロボット学会","Vol. 31","No. 5","pp. 461-464",2013,June
"金 俊完,山田 嘉穂,横田 眞一,枝村 一弥","多層化による高アスペクト比電極対を用いたECFマイクロポンプ","平成25年春季フルードパワーシステム講演会",,,,,"pp. 109-111",2013,May
"上野 将平,竹村研治郎,横田眞一,枝村一弥","電界共役流体を用いたシャクトリムシ型ロボット","ロボティクス・メカトロニクス講演会2013","ロボティクス・メカトロニクス講演会2013講演論文集",,,,"  2A1-M05",2013,May
"佐藤政哉,金俊完,横田眞一,枝村 一弥","ECFマイクロポンプ組み込み可変焦点形液体レンズに関する研究","ロボティクス・メカトロニクス講演会2013","ロボティクス・メカトロニクス講演会2013講演論文集",,,,"  2A1-D11",2013,May
"吉田和弘,塚本昇,金俊完,横田眞一","電極分割形フレキシブルER バルブを用いたマイクログリッパ","日本機械学会ロボティクス・メカトロニクス講演会2013","日本機械学会ロボティクス・メカトロニクス講演会2013講演論文集",,,,"  2A1-D08",2013,May
"小林 紀穂,竹村研治郎,横田眞一,枝村一弥","電界共役流体を用いたタンク・ポンプ一体型3関節ロボットフィンガ","ロボティクス・メカトロニクス講演会2013","ロボティクス・メカトロニクス講演会2013 講演論文集",,,,"page 1A1-L04",2013,May
"吉田 和弘,箱田 智史,嚴 祥仁,横田 眞一","形状適応機能を有する多自由度ERアクチュエータに関する研究（基本ユニットラージモデルの試作および基礎実験）","平成25年春季フルードパワーシステム講演会","平成25年春季フルードパワーシステム講演会講演論文集",,,,"pp. 112-114",2013,May
"Kazuhiro Yoshida,Satoshi Hakoda,Sang In Eom,Shinichi Yokota","Development of Multi-DOF Electro-Rheological Actuator with Shape Adaptation Capability - Fundamental Experiments of Basic Unit Large Model ?","The 5th International Conference on Manufacturing, Machine Design and Tribology (ICMDT 2013)",,,,,"p. 85",2013,May
"Kazuhiro YOSHIDA,Tomoya MIYOSHI,Sang In EOM,Shinichi YOKOTA","Development of a Multi-DOF ER Microactuator System with Alternating-pressure Source","The 5th International Conference on Manufacturing, Machine Design and Tribology (ICMDT 2013)",,,,,"p. 78",2013,May
"Joon-wan Kim,satoru yamasita,Shinichi Yokota,Kazuya Edamura","Micropump-Integrated Balloon Type Microactuators","The 5th International Conference on Manufacturing, Machine Design and Tribology（ICMDT2013 ）",,,,,"pp. 143",2013,May
"Kazuhiro Yoshida,Tomoyuki Sato,Sang In Eom,Joon-wan Kim,Shinichi Yokota","An AC Electroosmotic Micropump Using Square Pole - Slit Electrodes","The 5th International Conference on Manufacturing, Machine Design and Tribology",,,,,"p. 141",2013,May
"Kazuhiro Yoshida,Satoshi Hakoda,Sang In Eom,Shinichi Yokota","A Study on Multi-DOF Electro-Rheological Actuator with Shape Adaptation Capability","The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013)","Proceedings of the Eighth International Conference on Fluid Power Transmission and Control (ICFP 2013)","World Publishing Corporation",,,"pp. 542-545",2013,Apr.
"Shinichi Yokota","Micro Hydraulics Using Functional Fluid ECF","The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013)","Proceedings of the Eighth International Conference on Fluid Power Transmission and Control (ICFP 2013)","World Publishing Corporation",,,"pp. 18-23",2013,Apr.
"Joon-wan Kim,Yoshiho Yamada,Shinichi Yokota,Kazuya Edamura","High Performance ECF Micropump by the 3D Integration of MEMS-fabricated Eectrodes","The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013)","Proceedings of the Eighth International Conference on Fluid Power Transmission and Control (ICFP 2013)","World Publishing Corporation",,,"pp. 68-72",2013,Apr.
"吉田和弘,箱田智史,嚴祥仁,横田眞一","形状適応機能を有する多自由度ERアクチュエータの開発（提案と基礎実験）","2013年度精密工学会春季大会学術講演会","2013年度精密工学会春季大会学術講演会講演論文集",,,,"pp. 751-752",2013,Feb.
"横田眞一,吉田和弘","東京工業大学横田・吉田研究室",,"フルードパワーシステム",,"Vol. 44","No. 1","pp. 54-56",2013,Jan.
"吉田 和弘,箱田 智史,嚴 祥仁,横田 眞一","形状適応機能を有する多自由度ERアクチュエータに関する研究","平成24年秋季フルードパワーシステム講演会","平成24年秋季フルードパワーシステム講演会 論文集","一般社団法人 日本フルードパワーシステム学会",,,"pp. 25-27",2012,Nov.
"Yoko Abe,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Active Flow Channel Matrix using Electro-conjugate Fluid for μTAS application",,"JFPS International Journal of Fluid Power System",,"Vol. 5","No. 1","pp. 11-15",2012,Nov.
"吉田 和弘,佐藤 智之,嚴 祥仁,金 俊完,横田 眞一","スリット―直方体電極対を用いた交流電気浸透マイクロポンプ","第21回ＭＡＧＤＡコンファレンス","第21回ＭＡＧＤＡコンファレンス講演論文集","日本ＡＥＭ学会",,,"pp. 275-275",2012,Nov.
"安部 陽子（慶應義塾大学）,竹村 研治郎,佐藤 克成,横田 眞一,枝村 一弥","電界共役流体を用いたDroplet μTASのためのアクティブ流路マトリクス：複数液滴の位置制御","平成24年秋季フルードパワーシステム講演会","平成24年秋季フルードパワーシステム講演会 論文集",,,,"pp. 31-33",2012,Nov.
"吉田和弘,横田眞一","機能性流体を応用したマイクロデバイス",,"油空圧技術",,"Vol. 51","No. 11","pp. 99-103",2012,Oct.
"吉田 和弘,箱田 智史,嚴 祥仁,横田 眞一","形状適応機能を有する多自由度ERアクチュエータに関する研究（可動電極形ERバルブの開発）","山梨講演会","山梨講演会講演論文集","社団法人 日本機械学会関東支部",,"No. 120-3","pp. 20-21",2012,Oct.
"Joon-wan Kim,Yuji Miyagawa,Shinichi Yokota,Kazuya Edamura","Study on Closed Loop ECF Micro Devices for Cooling a Micro Chip","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 15-18",2012,Oct.
"Yoshiho Yamada,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","ECF Micropump by the 3D Integration of MEMS-fabricated Triangular Prism and Slit (TPS) Electrode Pairs","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 10-14",2012,Oct.
"Sang In Eom,Shinichi Yokota,Joon-wan Kim,Kazuya Edamura","New Design of an Electrode for ECF Jet Micro Cylinder","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 6-9",2012,Oct.
"Kazuhiro Yoshida,Tomoya Miyoshi,Sang In Eom,Shinichi Yokota","A Multi-DOF ER Microactuator System Using Alternating-Pressure Source","16th International Conference on Mechatronics Technology","16th International Conference on Mechatronics Technology PROCEEDINGS",,,,"pp. 1-5",2012,Oct.
"吉田 和弘,佐藤 智之,嚴 祥仁,金 俊完,横田 眞一","スリット?直方体電極対を用いた交流電気浸透マイクロポンプの特性評価","山梨講演会","山梨講演会講演論文集","社団法人 日本機械学会関東支部",,"No. No.120-3","pp. 18-19",2012,Oct.
"山下悟,金俊完,横田眞一,枝村 一弥","ECFジェット駆動バルーン形マイクロアクチュエータ","山梨講演会","山梨講演会講演論文集","社団法人 日本機械学会関東支部",,"No. 120-3","pp. 16-17",2012,Oct.
"金 俊完,宮川 裕史,横田 眞一,枝村 一弥","マイクロチップ冷却用環状ECFマイクロデバイスの特性評価","日本機械学会 2012年度年次大会","2012年度年次大会DVD論文集",,,,"  J113036",2012,Sept.
"Kazuhiro Yoshida,Souta Hara,Sang In Eom,Shinichi Yokota","A Novel Microgripper Using Flexible Electro-Rheological Valves","The 13th Mechatronics Forum International Conference","The 13th Mechatronics Forum International Conference Proceedings",,"Vol. 3/3",,"pp. 834-839",2012,Sept.
"今村 恒彦,NGUYEN Vinh Xuan Thanh,金 俊完,横田 眞一,枝村 一弥","MEMS 技術によるECF マイクロレートジャイロの開発と性能評価","日本機械学会 2012年度年次大会","2012年度年次大会DVD論文集",,,,"  J113035",2012,Sept.
"吉田 和弘,三好 智也,嚴 祥仁,横田 眞一","交流圧力源を用いた多自由度ER マイクロアクチュエータシステム","日本機械学会 2012年度年次大会","2012年度年次大会DVD論文集",,,"  J113015",,2012,Sept.
"金俊完,横田眞一","MEMS 技術を用いたマイクロ液圧源とその応用",,"JFPS 機能性流体を核としたフルードパワーシステムの融合化に関する研究委員会 研究成果報告書",,,,,2012,Sept.
"A. Yamaguchi,K. Takemura,S. Yokota,K. Edamura","Robot Finger Using Electro-conjugate Fluid",,"Advanced Robotics",,"Vol. 26",,"pp. 861/876",2012,July
"Joon-Wan Kim,Takashi Yoshimoto,Shinichi Yokota,Kazuya Edamura","Concept of a Focus-Tunable ECF Microlens and Fabrication of a Large Model Prototype",,"Fuji Technology Press Co., Ltd.",,"Vol. 6","No. 4","pp. 476-481",2012,July
"Hiroaki Kuwano,Shinichi Yokota","Application of Electro-Hydraulic Servo Systems to Hot Strip Down Coilers",,"International Journal of Automation Technology","Fuji Technology Press Co., Ltd.","Vol. 6","No. 4","pp. 445-449",2012,July
"Kazuhiro Yoshida,Tomohisa Muto,Joon-Wan Kim,Shinichi Yokota","An ER Microactuator with Built-in Pump and Valve",,"International Journal of Automation Technology","Fuji Technology Press Co., Ltd.","Vol. 6","No. 4","pp. 468-475",2012,July
"Yoko Abe,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Active Flow Channel Matrix Using Electro-conjugate Fluid for μTAS Application","The 2nd Japan-China Joint Workshop on Fluid Power",,,,,"pp. 45 ? 49",2012,May
"阿部 陽子,竹村 研治郎,佐藤 克成,横田 眞一,枝村 一弥","電界共役流体を用いたμTAS用次世代アクティブ流路マトリクス","平成24年春季フルードパワーシステム講演会",,,,,"pp. 1 -3",2012,May
"金 俊完,山田 嘉穂,横田 眞一,枝村 一弥","三角柱?スリット形電極を用いたECF マイクロポンプの立体集積化","ロボティクス・メカトロニクス講演会2012",,,,"No. 12-3","  2P1-E11(1)-2P1-E11(2)",2012,May
"Kento Mori,Akihiro Yamaguchi,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Control of a novel flexible finger using electro-conjugate fluid with built-in angle sensor",,"Sensors and Actuators A: Physical",,"Volume 183",,"pp. 75-83",2012,May
"嚴 祥仁,増田 弘樹,横田 眞一,吉田 和弘,枝村 一弥","ECF マイクロシリンダ","第２４回「電磁力関連のダイナミクス」シンポジウム",,,,,"pp. 297-298",2012,May
"嚴 祥仁,増田 弘樹,横田 眞一,吉田 和弘,枝村 一弥","ECFジェット駆動マイクロ液圧用シリンダ","ロボティクス・メカトロニクス講演会2012",,,,"No. 12-3","pp. 2P1-E10(1)-2P1-E10(2)",2012,May
"中川 慶（慶應義塾大学）,森 健人（慶應義塾大学）,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を駆動源とした衝突形マイクロ流体素子―駆動原理の確認および流路形状の検討―","ロボティクス・メカトロニクス講演会2012",,,,"No. 12-3","pp. 1P1-V04(1)- 1P1-V04(4)-",2012,May
"上野 将平（慶應義塾大学）,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を用いた小型壁面移動ロボット","ロボティクス・メカトロニクス講演会2012",,,,"No. 12-3","pp. 2A1-M04(1)-2A1-M04(4)",2012,May
"楢木 美香（慶應義塾大学）,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を応用したタービン型モータ","ロボティクス・メカトロニクス講演会2012",,,,"No. 12-3","pp. 2A2-A10(1)- 2A2-A10(4)",2012,May
"吉田 和弘,三好智也,嚴 祥仁,横田 眞一","交流圧力源を用いた多自由度ERマイクロアクチュエータシステムの提案","第12回機素潤滑設計部門講演会","第12回機素潤滑設計部門講演会 講演論文集",,,"No. 12-14","pp. 157-158",2012,Apr.
"金俊完,山田嘉穂,横田眞一,枝村 一弥","三角柱?スリット形電極対の三次元集積化によるECFマイクロポンプ","第12回機素潤滑設計部門講演会","第12回機素潤滑設計部門講演会 講演論文集",,,"No. 12-14","p. 151-152",2012,Apr.
"吉田 和弘,原 創太,嚴 祥仁,横田 眞一","バルブ分割形FERVを用いたマイクログリッパ","第12回機素潤滑設計部門講演会","第12回機素潤滑設計部門講演会 講演論文集",,,"No. 12-14","pp. 155-156",2012,Apr.
"金 俊完,王 海波,横田 眞一,枝村 一弥","MEMS技術を用いたECF三角柱?スリット形電極対の性能評価","第12回機素潤滑設計部門講演会","第12回機素潤滑設計部門講演会 講演論文集",,,"No. 12-14","pp. 153-154",2012,Apr.
"K. Yoshida,K. Kamiyama,J.-W. Kim,S. Yokota","An intelligent microactuator robust against disturbance using electro-rheological fluid",,"Sensors and Actuators A",,"Vol. 175",,"pp. 101-107",2012,Mar.
"J.-w. KIM,T. SUZUKI,S. YOKOTA,K. EDAMURA","Tube-type micropump by using electro-conjugated fluid (ECF)",,"Sensors and Actuators: A",,"Vol. 174",,"pp. 155/161",2012,Feb.
"吉田 和弘,横田 眞一","機能性流体ERFを用いた位置制御マイクロシステム",,"油空圧技術",,"vol. 5","No. 2","pp. 11-16",2012,Feb.
"Joon-wan KIM,Yu SAITO,Shinichi YOKOTA,Kazuya EDAMURA","Flexible Hydraulic Micro Actuator Based on McKibben-type ECF Artificial Muscles","11th International Conference on Fluid Control, Measurements and Visualization",,,,,,2011,Dec.
"Joon-wan Kim,Vinh Xuan Thanh Nguyen,Shinichi Yokota,Kazuya EDAMURA","High Performance ECF (Electro-Conjugate Fluid) Micropump by the In- plane Integration of MEMS-fabricated electrodes","15th International Conference on Mechatronics Technology (ICMT2011)",,,,,,2011,Dec.
"Kenichiro Tokida,Akihiro Yamaguchi,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","A Bio-inspired Robot Using Electro-conjugate Fluid","15th International Conference on Mechatronics Technology (ICMT2011)",,,,,,2011,Dec.
"Vinh Xuan Thanh Nguyen,Tsunehiko Imamura,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Development of MEMS-based ECF micro rate gyroscopes with the micro hydraulic power source and flow sensor in a chip","15th International Conference on Mechatronics Technology (ICMT2011)",,,,,,2011,Dec.
"Atsushi Yashiki,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","A Flexible Pump Using Electro-Conjugate Fluid for Liquid Cooling of Electronic Chips","15th International Conference on Mechatronics Technology (ICMT2011)",,,,,,2011,Nov.
"Vinh Xuan Thanh Nguyen,Tsunehiko Imamura,Joon-Wan Kim,Shinichi Yokota,Kazuya Edamura","MEMS-Based Liquid-Rate Gyroscope Using Electro-Conjugate Fluid","The 20th MAGDA Conference in Pacific Asia",,,,,,2011,Nov.
"Kazuhiro YOSHIDA,Satoshi Hakoda,Sang In Eom,Shinichi Yokota","An ER Microvalve Having Two-DOF Flexibility","15th International Conference on Mechatronics Technology (ICMT2011)",,,,"  CD-ROM","pp. 46-49",2011,Nov.
"Hai-bo Wang,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","Parameter Optimization on Power Density of MEMS-based Micro Triangular-prism-slit Electrode Array as an ECF-jet Generator","15th International Conference on Mechatronics Technology (ICMT2011)",,,,,,2011,Nov.
"Sang In Eom,Hiroki Masuda,Shinichi Yokota,Kazuhiro YOSHIDA,Kazuya Edamura","Study about Micro Cylinder for Bidirectional Rolling Diaphragm Actuator Using ECF Jet","15th International Conference on Mechatronics Technology (ICMT2011)",,,,"  CD-ROM","pp. 461-464",2011,Nov.
"Haibo,Joon-wan,Shinichi,Kazuya Edamura","Performance Evaluation of a Triangular-Prism-Slit Electrode Pair As an Electro-Conjugate Fluid Jet Generator","2011 ASME Dynamic Systems and Control Conference, and Bath/ASME Symposium on Fluid Power and Motion Control",,,,,,2011,Nov.
"T. Imamura,T. Suzuki,J.-w. Kim,S. Yokota,K. Edamura","Development of MEMS-based ECF micro rate gyro","8th JFPS international Symposium on Fluid Power","Proceedings of JFPS International Symposium on Fluid Power",,"  2B2-1",,"  471-476",2011,Oct.
"田中 豊,酒井 朗弘,横田 眞一,枝村 一弥","電界共役流体の電気的特性に関する実験的検討","山梨講演会2011",,,,,,2011,Oct.
"吉田 和弘,原 創太,嚴 祥仁,横田 眞一","フレキシブル ER バルブを用いたマイクログリッパ","山梨講演会2011",,,,,"pp. 52-53",2011,Oct.
"K. Yoshida,T. Anzai,J.-w. Kim,S. Yokota","A micro mobile hydraulic system using electro-rheological fluid","8th JFPS international Symposium on Fluid Power",,,"  2B2-2",,"  471-476",2011,Oct.
"H.-b. Wang,J.-w. Kim,S. Yokota,K. Edamura","Parameter optimization of MEMS-based micro triangular-prism-slit electrode pair as an electro-conjugate fluid jet generator","8th JFPS international Symposium on Fluid Power","Proceedings of JFPS International Symposium on Fluid Power",,"  2B2-3",,"  477-481",2011,Oct.
"増田弘樹,嚴 祥仁,横田 眞一,吉田 和弘,枝村 一弥","ECF ジェット圧力駆動マイクロシリンダの試作および特性解明","山梨講演会2011",,,,,"pp. 54-55",2011,Oct.
"K. Mori,A. Yamaguchi,K. takemura,S. Yokota,K. Edamura","The control of a bellows actuator using electro-conjugate fluid","8th JFPS international Symposium on Fluid Power","Proceedings of JFPS International Symposium on Fluid Power",,"  2B3-1",,"  488-494",2011,Oct.
"J.-w. Kim,S. Yokota,K. Edamura","Needle-ring electrode pair as an ECF-jet generator by using MEMS technology","8th JFPS international Symposium on Fluid Power","Proceedings of JFPS International Symposium on Fluid Power",,"  2B2-4",,"  482-487",2011,Oct.
"田中 豊,渡邉 彬,酒井 朗弘,横田 眞一,枝村 一弥","電極間における電界共役流体の流れの可視化","日本機械学会 2011年度年次大会",,,,,,2011,Sept.
"嚴 祥仁,増田 弘樹,横田 眞一,吉田 和 弘,枝村 一弥","ECF ジェットを用いた両方向ローリングダイアフラ ムマイクロアクチュエータに関する研究","日本機械学会 2011年度年次大会",,,,"  DVD-ROM","  S113041",2011,Sept.
"吉田 和弘,村松 恵治,金 俊完,嚴 祥仁,横田 眞一","偏流板を用いた交流電気浸透マイクロポンプ","日本機械学会 2011年度年次大会",,,,"  DVD-ROM","  J112021",2011,Sept.
"今村 恒彦,鈴木 俊也,金 俊完,横田 眞一,枝村 一弥","MEMS 技術によるECF マイクロレートジャイロの開発","日本機械学会 2011年度年次大会",,,,,,2011,Sept.
"嚴祥仁,横田眞一,吉田和弘,増田弘樹,枝村 一弥","高温環境におけるECF アクチュエータの可能性?温度変化による電流値の変化","第２９回日本ロボット学会学術講演会",,,,,"  RSJ2011AC3K1-4",2011,Sept.
"横田 眞一,吉田 和弘","アクチュエータ 研究開発の最前線（分担）",,,"株式会社エヌ・ティー・エス",,,"pp. 61-70, 165-173",2011,Aug.
"J.-w. Kim,T. Yoshimoto,S. Yokota,K. Edamura","Focus-tunable ECF microlens by MEMS technology","2011 International Conference on Fluid Power and Mechatronics","Proceedings of 2011 International Conference on Fluid Power and Mechatronics",,"  P0162",,"  738-741",2011,Aug.
"H.-b. Wang,J.-w. Kim,S. Yokota,K. Edamura","A flexible electro-conjugate fluid micropump with three-dimensional triangular-prism-slit electrode pair","2011 International Conference on Fluid Power and Mechatronics","Proceedings of 2011 International Conference on Fluid Power and Mechatronics",,"  P0093",,"  385-389",2011,Aug.
"吉田 和弘,金 俊完,嚴 祥仁,横田 眞一","機能性流体ERF を用いた位置制御マイクロシステム",,"IFPEXカレッジコーナー講演論文集",,,,"pp. 19-20",2011,July
"横田 眞一,吉田 和弘","IFPEX2011 ?フルードパワーの可能性? 東京工業大学 横田・吉田研究室",,"油空圧技術",,"vol. 50","No. 6","pp. 24-26",2011,June
"金俊完,横田眞一,枝村一弥","三角柱?スリット形電極対を用いた両方向ＥＣＦポンプ","第２３回「電磁力関連のダイナミクス」シンポジウム",,,,,,2011,May
"グェン ヴィンソンタン,金 俊完,横田 眞一,枝村 一弥","三角柱?スリット形電極の直列・並列化によるECF マイクロポンプの性能評価","日本機械学会 ロボティクス・メカトロニクス講演会2011",,,,,,2011,May
"森 健人,山口 彰浩,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を用いたベローズアクチュエータの制御","日本機械学会 ロボティクス・メカトロニクス講演会2011",,,,,,2011,May
"山口 彰浩,竹村 研治郎,横田 眞一,枝村 一弥","電界共役流体を用いたロボットハンド","日本機械学会 ロボティクス・メカトロニクス講演会2011",,,,,,2011,May
"吉灘 裕,岡村 健治,横田 眞一","油圧ショベルに適した異構造マスタ・スレーブ操作方式の研究","日本機械学会 ロボティクス・メカトロニクス講演会2011",,,,,,2011,May
"箱田 智史,吉田和弘,Sang In EOM,横田 眞一","2 自由度屈曲可能なER マイクロバルブ","平成23年春季フルードパワーシステム講演会",,,,,"pp. 79-81",2011,May
"増田 弘樹,嚴 祥仁,横田 眞一,吉田 和弘,枝村 一弥","ECF ジェット駆動マイクロシリンダの開発","平成23年春季フルードパワーシステム講演会",,,,,"pp. 82-84",2011,May
"グェン ヴィンソンタン,金  俊完,横田 眞一,枝村 一弥","MEMS 電極の平面集積化によるECF マイクロポンプの性能評価","平成23年春季フルードパワーシステム講演会",,,,,,2011,May
"金 俊完,斎藤 優,横田 眞一,枝村 一弥","McKibben 形ECF 人工筋を有する拮抗駆動マイクロアクチュエータ","平成23年春季フルードパワーシステム講演会",,,,,,2011,May
"吉田和弘,佐藤智之,嚴祥仁,横田眞一","交流電気浸透を用いたマイクロ流動発生器の提案","第２３回「電磁力関連のダイナミクス」シンポジウム",,,,,"pp. 481-484",2011,May
"HAIBO WANG,Joon-wan KIM,SHINICHI YOKOTA,枝村一弥","A flexible electro-conjugate fluid (ECF) micropump with three-dimensional triangular-prism-slit (TPS) electrode array","第２３回「電磁力関連のダイナミクス」シンポジウム",,,,,,2011,May
"Masahiro Ishida,Yutaka Tanaka,Shinichi Yokota,Kazuya Edamura","Design and Fabrication of Electrodes for High-Powered Micro Pump Using Electro-Conjugate Fluid","The 4th International Conference on Manufacturing, Machine Design and Tribology",,,,,,2011,Apr.
"Kazuhiro Yoshida,Keiji Muramatsu,Joon-wan Kim,Sang In Eom,Shinichi Yokota","A Study on Micro Flow Generator Using AC Electroosmosis","The 4th International Conference on Manufacturing, Machine Design and Tribology",,,,,"pp. 67-68",2011,Apr.
"J.-w. Kim,S. Yokota,K. Edamura","ECF-jet Micro-generator with multiple needle-hole electrode pairs","International Conference on Manufacturing, Machine Design and Tribology","Proceedings of the International Conference on Manufacturing, Machine Design and Tribology",,"  P-39",,"  235-236",2011,Apr.
"Kento Mori,Hideki Yamamoto,Kenjiro Takemura,SHINICHI YOKOTA,Kazuya Edamura","Dominant Factors Inducing Electro-conjugate Fluid Flow",,"the Journal of Sensors and Actuators A","Elsevier","vol. 167",,"  84-90",2011,Mar.
"横田眞一,尾川宜嗣,枝村 一弥,竹村研治郎","ECFジェット駆動３軸液体マイクロレートジャイロ","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B08",2011,Feb.
"吉田和弘,横田眞一","液晶系ERFを用いたマイクロシステム",,"フルードパワーシステム",,"Vol. 42","No. 1","pp. 16-19",2011,Jan.
"尾川宜嗣,横田眞一,枝村 一弥,竹村研治郎","電界共役流体を用いた2軸液体マイクロレートジャイロの開発",,"日本機械学会論文集",,"  77巻","  773号","  204-211",2011,Jan.
"A. Yamaguchi,K. Takemura,S. Yokota,K. Edamura","A Robot Hand Using Electro-conjugate Fluid",,"Sensors & Actuators: A",,"Vol. 170",,"pp. 139-146",2011,
"吉田和弘,横田眞一","液晶系ERFを用いたマイクロシステム",,"フルードパワーシステム",,"Vol. 42","No. 1","pp. 16-19",2011,
"K. Tokida,K. Takemura,S. Yokota,K. Edamura","Robotic earthworm using electro-conjugate fluid",,"International Journal of Applied Electromagnetics and Mechanics",,"Vol. 33","No. 4","  1643-1651",2011,
"A. Yamaguchi,K. Takemura,S. Yokota,K. Edamura","An In-pipe Mobile Robot Using Electro-Conjugate Fluid",,"Journal of Advanced Mechanical Design, Systems,and manufacturing",,"Vol. 5","No. 3","pp. 214-226",2011,
"山口彰浩,竹村研治郎,横田眞一,枝村一弥","電界共役流体を用いたポンプ・タンク一体型液圧駆動ロボットフィンガ",,"日本機械学会論文集Ｃ",,"Vol. 76","No. 772","pp. 3689/3696",2010,Dec.
"山口彰浩,竹村研治郎,横田眞一,枝村 一弥","電界共役流体を用いたロボットハンド","平成22年秋季フルードパワーシステム講演会","平成22年秋季フルードパワーシステム講演会講演論文集","フルードパワーシステム学会",,,"pp. 106/108",2010,Dec.
"森 健人,山口彰浩,竹村研治郎,横田眞一,枝村 一弥","電界共役流体の制御モデルの構築","平成22年秋季フルードパワーシステム講演会","平成22年秋季フルードパワーシステム講演会講演論文集","フルードパワーシステム学会",,,"pp. 103/105",2010,Dec.
"金 俊完,由元 崇,横田眞一,枝村 一弥","MEMS 技術を用いたECF 可変焦点マイクロレンズの提案","平成22年秋季フルードパワーシステム講演会","平成22年秋季フルードパワーシステム講演会講演論文集","フルードパワーシステム学会",,,"pp. 109/111",2010,Dec.
"鈴木俊也,金 俊完,横田眞一,枝村 一弥,今村恒彦","MEMS技術によるECFマイクロレートジャイロの開発","平成22年秋季フルードパワーシステム講演会","平成22年秋季フルードパワーシステム講演会講演論文集","フルードパワーシステム学会",,,"pp. 112/114",2010,Dec.
"横田眞一","機能性流体を利用したアクチュエータ","日本機械学会東北学生会学術講演会",,"日本機械学会",,,,2010,Dec.
"横田眞一","マイクロ液圧","平成22年度秋季フルードパワーシステム学術講演会","平成22年度秋季フルードパワーシステム学術講演会講演論文集","日本フルードパワーシステム学会",,,"pp. 3/6",2010,Dec.
"Tsunehiko Imamura,Toshiya Suzuki,Joon-wan KIM,Shinichi Yokota,Kazuya Edamura","Miniaturization of ECF Micro Rate Gyro by using MEMS Technology","The 14th International Conference on Mechatronics Technology(ICMT2010)","The 14th International Conference on Mechatronics Technology(ICMT2010)",,,,,2010,Nov.
"Shinichi Yokota,Yoshitsugu Ogawa,Kenjiro Takemura,Kazuya Edamura","A dual-axis liquid rate micro gyroscope using Electro-Conjugate Fluid",,"Journal of Advanced Computational Intelligence and Intelligent Informatics",,"Vol. 14","No. 7","pp. 751/755",2010,Nov.
"Hai-bo Wang,Joon-wan Kim,Shinichi Yokota,Kazuya Edamura","A High Performance ECF-jet Generator using Improved Three-dimensional Electrode Structures","The 14th International Conference on Mechatronics Technology(ICMT2010)","The 14th International Conference on Mechatronics Technology(ICMT2010)",,,,"pp. 142/146",2010,Nov.
"Kazuhiro Yoshida,Takefumi Anzai,Joon-wan Kim,Shinichi Yokota","A Micro Rolling Diaphragm Actuator Equipped with an ER Valve","The 14th International Conference on Mechatronics Technology(ICMT2010)","The 14th International Conference on Mechatronics Technology(ICMT2010)",,,,"pp. 147-151",2010,Nov.
"吉田和弘,村松恵治,金 俊完,嚴 祥仁,横田眞一","交流電気浸透流を用いたアクチュエータ駆動用マイクロポンプ","日本機械学会関東支部山梨講演会2010","日本機械学会関東支部山梨講演会2010講演論文集,","日本機械学会",,,"pp. 62/63",2010,Oct.
"Shinichi YOKOTA,Fumiya YAJIMA,Kenjiro TAKEMURA,Kazuya EDAMURA","ECF-jet driven Micro artificial antagonistic muscle actuators and its integration",,"Advanced Robotics","VSP","Vol. 24","No. 14","pp. 1929-1943",2010,Oct.
"斎藤 優,横田眞一,竹村研治郎,枝村 一弥","コモンラインを有する拮抗ECFマイクロアクチュエータ","日本機械学会関東支部山梨講演会2010","日本機械学会関東支部山梨講演会2010講演論文集","日本機械学会",,,"pp. 54/55",2010,Oct.
"Kenichiro Tokida,Kenjiro Takemura,Shinichi Yokota,Kazuya Edamura","Robotic earthworm using electroconjugate fluid",,"International Journal of Applied Electromagnetics and Mechanics",,"Vol. 33","No. 4","pp. 1643/1651",2010,Oct.
"Jung-Ho Park,Young-Bog Ham,So-Nam Yun,Mi-Young Seo,Kazuhiro Yoshida,Shinichi Yokota","High-Power Piezoelectric Micropumps Using Resonance Drive and/or Fluid Inertia Effect","7th International Workshop on Microfactories (IWMF2010)","7th International Workshop on Microfactories (IWMF2010)",,,,"pp. 464/469",2010,Oct.
"吉田和弘,村松 恵治,金 俊完,横田眞一","交流電気浸透流を用いたマイクロアクチュエータの提案","日本機械学会2010年度年次大会","日本機械学会2010年度年次大会講演論文集","日本機械学会","Vol. 7",,"pp. 341/342",2010,Sept.
"Kazuhiro Yoshida,Toru Ide,Joon-wan Kim,Shinichi Yokota","A Microgripper Using Flexible Electro-Rheological Valves","WAC 2010（World Automation Congress）","WAC 2010（World Automation Congress）",,,,,2010,Sept.
"吉田和弘,横田眞一,枝村一弥","高温環境における機能性流体アクチュエータの可能性",,"第26回日本ロボット学会学術講演会講演論文集",,,,"  RSJ2010AC1N1-2",2010,Sept.
"Joon-wan KIM,Vinh Xuan Thanh Nguyen,Shinichi YOKOTA,Kazuya EDAMURA","MEMS-based tube-type micropump by using electro-conjugated fluid (ECF)","Proc. ICEM2010","Proc. ICEM2010",,,,"  RF-003174",2010,Sept.
"A. Yamaguchi,K. Takemura,S. Yokota,K. Edamura","A robot finger using electro-conjugate fluid","Proc. ICEM2010","Proc. ICEM2010",,,,"  RF-002852",2010,Sept.
"Yutaka Tanaka,Masahiro Ishida,Shinichi Yokota,Kazuya EDAMURA","Miniaturized and High-Powered Micro Pump Using Electro-Conjugate Fluid","WAC 2010（World Automation Congress）","WAC 2010（World Automation Congress）",,,,,2010,Sept.
"K. Mori,H. Yamamoto,K. Takemura,S. Yokota,K. Edamura","Theoretical Modeling and Corroborative Experiments for Electro-conjugate Fluid Flow","Proc. ICEM2010","Proc. ICEM2010",,,,"  RF-002283",2010,Sept.
"横田眞一","会長就任にあたって、挨拶",,"日本フルードパワーシステム学会誌",,"Vol. 41","No. 4","pp. 181",2010,July
"横田 眞一","機能性流体を利用したマイクロアクチュエータ",,"科学と工業","社団法人大阪工研協会","Vol. 84","No. 6","pp. 12/17",2010,June
"吉田和弘,金俊完,横田眞一","均一系ER流体を用いたフレキシブルERマイクロアクチュエータ",,"日本フルードパワーシステム学会機能性流体を活用した次世代型フルードパワーシステムに関する研究委員会研究成果報告書",,,,"pp. 22-25",2010,June
"王 海波,金 俊完,横田眞一,枝村 一弥","三角柱-スリット形電極対を用いたECF ジェット発生器の性能評価MEMS技術を用いた管路形ECFマイクロポンプ","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B03",2010,June
"グェン ヴィン ソン タン,金 俊完,横田眞一,枝村 一弥","MEMS技術を用いた管路形ECFマイクロポンプ","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B05",2010,June
"吉田和弘,金 俊完,安斎 隆史,横田眞一","ベロフラムアクチュエータのマイクロ化とERマイクロアクチュエータへの応用","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B06",2010,June
"竹村研治郎,横田 眞一","電界共役流体の基礎と応用",,"日本AEM学会誌","日本AEM学会","Vol. 18","No. 2","pp. 142/147",2010,June
"KAZUHIRO YOSHIDA,Tomohisa Muto,Joon-wan KIM,SHINICHI YOKOTA","An ER Microactuator with Built-in Pump and Valve","12th Int. Conf. on New Actuators (ACTUATOR 2010)","Proc. 12th Int. Conf. on New Actuators (ACTUATOR 2010)",,,,"pp. 556-559",2010,June
"Hideki Yamamoto,Kento Mori,Kenjiro Takemura,Leslie Yeo,James Friend,Shinichi Yokota,Kazuya Edamura","Numerical Modeling of Electro-Conjugate Fluid Flows",,"SENSORS AND ACTUATORS A-PHYSICAL","ELSEVIER SCIENCE SA","Vol. 161","No. 1-2","pp. 152-157",2010,June
"鈴木俊也,横田眞一,金 俊完,今村恒彦,枝村 一弥","MEMS技術によるECFマイクロレートジャイロの特性評価","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B04",2010,June
"森 健人,竹村研治郎,横田眞一,枝村 一弥","電界共役流体に発生する流動の可視化","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom, 1P1-B02",2010,June
"山口彰浩,竹村研治郎,横田眞一,枝村 一弥","電界共役流体を用いたロボットフィンガ","日本機械学会ロボティクス・メカトロニクス講演会2010","日本機械学会ロボティクス・メカトロニクス講演会2010講演論文集","日本機械学会",,,"  CD-rom,1P1-B01",2010,June
"金 俊完,横田眞一,枝村 一弥","ECFを用いた可変焦点マイクロレンズ","平成22年度春季フルードパワーシステム学術講演会","平成22年度春季フルードパワーシステム学術講演会講演論文集","フルードパワーシステム学会",,,"pp. 127/129",2010,May
"吉田和弘,安斎隆史,金 俊完,横田眞一","ERFを作動流体としたポンプ搭載形管内走行マイクロマシン","平成22年度春季フルードパワーシステム学術講演会","平成22年度春季フルードパワーシステム学術講演会講演論文集","フルードパワーシステム学会",,,"pp. 70/72",2010,May