"Moeko Yamazaki,Kazuhiro Ishikawa,TOSHIYUKI FUJII,Yoji Miyajima","Effects of a preannealing process on the morphology of developed kinks in mille-feuille structured Cu/A5052 alloy fabricated by accumulative roll bonding: criteria for kink formation",,"Materials Transactions",,"Vol. 64","No. 4","pp. 827-834",2023,Apr.
"山崎萌子,石川和宏,藤居俊之,宮嶋陽司","Cu/A5052異種金属積層材の焼鈍による変形挙動の変化","令和4年度 日本金属学会・日本鉄鋼協会北陸信越支部連合講演会",,,,,,2022,Dec.
"山崎萌子,石川和宏,藤居俊之,宮嶋陽司","fcc金属で構成される異種金属積層材の圧縮変形挙動に及ぼす焼鈍の影響","日本金属学会2022年秋期(第171回)講演大会","日本金属学会2022年秋期(第171回)講演大会講演概要",,,,,2022,Sept.
"Yoji Miyajima,Takuya Yamada,TOSHIYUKI FUJII","Plastic instability criterion based on new necking parameters for Cu?Al, Cu?A5052, and Cu?A5083 roll-bonded laminated metal composites fabricated without post-annealing",,"Journal of Materials Processing Technology",,"Vol. 306",,"pp. 117634",2022,Aug.
"遠藤稜,鈴木敬康,宮澤知孝,藤居俊之,宮嶋陽司,萩原幸司","長周期積層構造型マグネシウム合金における塑性変形挙動の温度とひずみ速度依存性","日本金属学会2021年秋期 (第169回)講演大会",,,,,,2021,Sept.
"藤居俊之,遠藤稜,宮澤知孝,宮嶋陽司,萩原幸司","LPSO 相を含むマグネシウム合金における塑性変形挙動の温度とひずみ速度依存性","軽金属学会第140回春期大会",,,,,,2021,May
"宮嶋陽司,宮澤知孝","ミニ特集「若手研究グループ活動報告」 No.3:多様な先端観察・測定法を用いた組織の定量と力学特性解析への適用",,"まてりあ / Materia Japan","日本金属学会","Vol. 59","No. 12","pp. 685-687",2020,Dec.
"Ryosuke Matsutani,Yoji Miyajima,Susumu Onaka","Refinement and Coarsening of Grains Caused by Tensile-Shear Tests in Ultra-Fine Grained Cu Processed by Severe Plastic Deformation",,"Materials Transactions",,"Vol. 60","No. 5","pp. 751-757",2019,Apr.
"高増宣仁,宮澤知孝,宮嶋陽司,足立大樹,尾中晋","ARB加工した超微細粒Ni多結晶材のX線回折による弾性変形挙動の評価",,"日本金属学会誌",,"Vol. 83","No. 5","pp. 157-163",2019,Mar.
"村松星彦,宮嶋陽司,尾中晋","ECAP加工で作製された超微細結晶粒AlのXRD測定による内部応力状態の評価","日本金属学会秋期講演大会",,,,,,2018,Sept.
"高増宣仁,宮嶋陽司,尾中晋","引張変形中その場XRD測定による超微細粒Ni多結晶の弾塑性変形挙動の評価","日本金属学会講演大会",,,,,,2018,Sept.
"東海泰三,宮嶋陽司,尾中晋","超微細粒Al-Fe合金のARB加工とその後の焼鈍に伴う力学的特性と電気的特性の変化","日本金属学会秋期講演大会",,,,,,2018,Sept.
"宮嶋陽司,藤岡和毅,尾中晋","超微細粒金属の変形中その場電気抵抗測定","日本金属学会秋期講演大会",,,,,,2018,Sept.
"服部夏実,宮嶋陽司,尾中晋","Cu単結晶における圧痕周りでの結晶方位変化の位置依存性","日本金属学会秋期講演大会",,,,,,2018,Sept.
"古谷玲,宮嶋陽司,尾中晋","引張変形により延性破壊した銅単結晶試料表面の方位測定","日本金属学会秋期講演大会",,,,,,2018,Sept.
"松谷亮輔,宮嶋陽司,尾中晋","ECAP加工で作製した超微細粒銅の引張変形時における単純せん断変形","日本金属学会秋期講演大会",,,,,,2018,Sept.
"松谷亮輔,宮嶋陽司,尾中晋","大変形前後における超微細粒銅での同一領域での組織変化の観察","日本金属学会講演大会",,,,,,2018,Mar.
"Yoji Miyajima,Takahiko Shinohara,Hiroki Adachi,Toshiyuki Fujii,Susumu Onaka,MASAHARU KATO","Change in Electrical Resistivity of Pure Cu Processed by Accumulative Roll Bonding",,"Materials Transactions",,"Vol. 59","No. 3","pp. 393-398",2018,Feb.
"松谷亮輔,宮嶋陽司,尾中晋","超微細粒銅の塑性変形に伴う結晶粒の形状と方位の変化","日本金属学会講演大会",,,,,,2017,Sept.
"浜野航貴,宮嶋陽司,尾中晋","双結晶銅における圧延による方位変化に及ぼす粒界と低温 焼鈍の影響","日本金属学会講演大会",,,,,,2017,Sept.
"宮嶋陽司,小ヶ倉勇樹,尾中晋","MWP 法および CMWP 法による超微細粒銅の引張試験中そ の場 XRD 測定結果の解析","日本金属学会講演大会",,,,,,2017,Sept.
"高増宣仁,小ヶ倉勇樹,宮嶋陽司,尾中晋","超微細粒 Ni 多結晶材の集合組織と弾性変形挙動の評価","日本金属学会講演大会",,,,,,2017,Sept.
"宮嶋 陽司","Al -Fe 合金の巨大ひずみ加工に伴う電気抵抗率，力学特性組織の変化","高温変形の組織ダイナミクス研究会「平成 29 年度 夏の学校」",,,,,,2017,Sept.
"Yoji Miyajima","Microstructural evolution of Cu-1.6mass% Fe alloy during accumulative roll bonding","FiMPART 2017",,,,,,2017,July
"Yoji Miyajima,Daisuke Kashioka,Nobuhiro Tsuji","Ultimate Rolling Texture in Pure Aluminum Highly Deformed by  Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain  Subdivision",,"Materials Transactions",,"Vol. 58","No. 08","pp. 1127-1133",2017,July
"宮嶋陽司,福田晃二郎,足立大樹,尾中晋,加藤雅治","巨大ひずみ加工を用いたアルミニウムの結晶粒超微細化に及ぼす鉄添加の効果","日本軽金属学会秋期講演大会",,,,,,2016,Nov.
"小ヶ倉勇樹,宮嶋陽司,尾中 晋","種々のFCC金属超微細粒材についての引張変形中その場XRD測定","第13回ヤングメタラジスト研究交流会",,,,,,2016,Oct.
"Yoji Miyajima,Satoshi Okubo,Tomotaka Miyazawa,Hiroki Adachi,Toshiyuki Fujii","In-situ X-ray diffraction during tensile deformation of ultrafine-grained copper using synchrotron radiation",,"Philosophical Magazine Letters","Taylor & Francis","Vol. 96","No. 8","page 294-304",2016,Oct.
"藤岡 和毅,宮嶋 陽司,尾中 晋","純銅の室温引張変形にともなう転位密度化電気抵抗率測定よる評価","第13回ヤングメタラジスト研究交流会",,,,,,2016,Oct.
"鯵坂祐介,宮嶋陽司,尾中 晋","銅単結晶の冷間圧延による方位変化のSEM/EBSD解析","第13回ヤングメタラジスト研究交流会",,,,,,2016,Oct.
"宮嶋陽司,海住亮太,尾中晋,加藤雅治","超微細粒Al-Mg合金における温度77Kから323Kでの熱活性化変形過程","日本金属学会秋期講演大会",,,,,,2016,Sept.
"藤岡和毅,宮嶋陽司,尾中晋","純銅の室温引張変形にともなう格子欠陥量変化の電気抵抗率を用いた検出","日本金属学会秋期講演大会",,,,,,2016,Sept.
"鯵坂祐介,宮嶋陽司,尾中 晋","冷間圧延による{111}<112> 銅単結晶の方位変化のSEM/EBSD解析",,"日本金属学会誌",,"Vol. 80","No. 9","pp. 553-561",2016,July
"Yoji Miyajima,Midori Uchiyama,Hiroki Adachi,Toshiyuki Fujii,Susumu Onaka,Masaharu Kato","Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper",,"MATERIALS TRANSACTIONS","The Japan Institute of Metals and Materials","Vol. 57","No. 9","pp. 1411-1417",2016,June
"M.  Mito,H. Matsui,T. Yoshida,T. Anami,K. Tsuruta,H. Deguchi,T. Iwamoto,Daisuke Terada,Y. Miyajima,N. Tsuji","Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation",,"Review of Scientific Instruments","AIP publishing","Volume 87","Number 5",,2016,May
"Yoji Miyajima","Dislocation density of ultrafine grained Cu fabricated by severe plastic deformation","THERMEC’2016","Abstract book",,,,,2016,May
"Hayashi, K.,Osada, M.,Kurosu, Y.,Miyajima, Y.,Onaka, S.","Log angles: Characteristic angles of crystal orientation given by the logarithm of rotation matrix",,"Materials Transactions",,"Vol. 57","No. 4","pp. 507-512",2016,Mar.
"Miyajima yoji,Ueda Taro,Hiroki Adachi,Fujii Toshiyuki,SUSUMU ONAKA,Kato Masaharu","Dislocation Density of FCC Metals Processed by ARB","6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD)",,,,,,2016,
"Hiroki Adachi,Y. Miyajima,M. Sato,Nobuhiro Tsuji","Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique",,"Mater Trans",,"Vol. 56",,"pp. 671-678",2015,Apr.
"Yoji Miyajima,Satoshi Ookubo,Hiroki Abe,Hiroki Okumura,TOSHIYUKI FUJII,SUSUMU ONAKA,MASAHARU KATO","Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing",,"Materials Characterization",,"Vol. 104",,"pp. 101-106",2015,Apr.
"Y. Miyajima,S. Komatsu,M.  Mitsuhara,Satoshi Hata,Hideharu Nakashima,Nobuhiro Tsuji","Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium",,"Philos Mag",,"Vol. 95",,"pp. 1139-1149",2015,Mar.
"Hayashi Kunio,Osada Motoki,Kurosu Yuki,Yoji Miyajima,Onaka susumu","Log Angles: Characteristic Angles of Crystal Orientation Given by the Logarithm of Rotation Matrix",,"JOURNAL OF THE JAPAN INSTITUTE OF METALS","The Japan Institute of Metals and Materials","Vol. 79","No. 1","p. 9-15",2015,Jan.
"齋藤 遼太,冠 和樹,宮嶋 陽司,宮澤 知孝,藤居 俊之,加藤 雅治","Cu-Ag 合金箔の繰り返し変形に伴う転位組織の発達過程","2014年秋期講演大会(第155回)","日本金属学会講演概要","公益社団法人 日本金属学会",,,,2014,Sept.
"大久保 智,宮澤 知孝,宮嶋 陽司,足立 大樹,藤居 俊之,尾中 晋,加藤 雅治","超微細粒Cuにおける引張変形中の転位密度変化","2014年秋期講演大会(第155回)","日本金属学会講演概要","公益社団法人 日本金属学会",,,,2014,Sept.
"齋藤 実奈子,宮嶋 陽司,宮澤 知孝,藤居 俊之,加藤 雅治","Fe析出粒子を含むCu合金の巨大ひずみ加工による組織変化","2014年秋期講演大会(第155回)","日本金属学会講演概要","公益社団法人 日本金属学会",,,,2014,Sept.
"Satoshi Ookubo,Hiroki Abe,Yoji Miyajima,TOSHIYUKI FUJII,SUSUMU ONAKA,MASAHARU KATO","Effects of temperature and strain rate on plastic deformation of ultrafine-grained copper prepared by equal-channel angular pressing",,"MATERIALS TRANSACTIONS","The Japan Institute of Metals and Materials","Vol. 55","No. 10","pp. 1325-1530",2014,Aug.
"Yoji Miyajima,Kotaro Iguchi,SUSUMU ONAKA,MASAHARU KATO","Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding",,"Advances in Materials Science and Engineering","Hindawi Publishing Corporation","Vol. 2014","  ID614821","  11 pages",2014,Apr.
"Akari Yoshida,Yoji Miyajima,SUSUMU ONAKA","Evolution of the spread of crystal orientation with plastic deformation in a cold-rolled Cu single crystal",,"Journal of Materials Science",,"Vol. 49","No. 5","pp. 2013-2017",2014,
"吉田暁海理,宮嶋陽司,尾中 晋","圧延と繰り返し重ね接合圧延による銅単結晶の方位の回転と分裂",,"日本金属学会誌",,"Vol. 77","No. 10","pp. 435-439",2014,
"Satoshi Ookubo,Yoji Miyajima,TOSHIYUKI FUJII,SUSUMU ONAKA,MASAHARU KATO","Grain Size Variation during Low Temperature Creep and Tensile Deformation of  Ultrafine-Grained Copper",,"Materials Transactions",,"Vol. 54","No. 9","pp. 1605-1611",2013,May
"P. P. Bhattacharjee,Y. Takatsuji,Y. Miyajima,Daisuke Terada,Nobuhiro Tsuji","Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture",,"Mater Sci Forum",,"Vol. 753",,"pp. 293-296",2013,Mar.
"Yukito Nakanishi,Yoji MIYAJIMA,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Stability of Fatigued Dislocation Wall Structure in Coarse-Grained and Ultrafine-Grained Aluminum against Monotonic Tensile Deformation",,"Materials Transactions",,"Vol. 54","No. 1","pp. 43-49",2013,Jan.
"Yoji MIYAJIMA,Hiroki Abe,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Effects of Si on mechanical properties and microstructure evolution in ultrafine-grained Cu-Si alloys processed by accumulative roll bonding",,"Acta Materialia",,,,,2013,
"Hiroki Adachi,Y. Miyajima,A. Shibata,Daisuke Terada,Nobuhiro Tsuji","Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation",,"Proceedings of the 13th International Conference on Aluminum Alloys (Icaa13)",,,,"pp. 61-66",2012,Sept.
"P.P.Bhattacharjee,Y.Takatsuji,Y.Miyajima,D.Terada,N.Tsuji","Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}) Polycrystalline Nickel Sheet",,"Metallurgical and Materials Transactions A",,"Vol. 43A",,"Page 2442-2452",2012,July
"Tomotaka Miyazawa,Yuta Ozawa,Miyajima,TOSHIYUKI FUJII,SUSUMU ONAKA,MASAHARU KATO","Morphological and crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix",,"MATERIALS TRANSACTIONS","The Japan Institute of Metals","Vol. 53","No. 5","pp. 893-901",2012,Mar.
"Yoji MIYAJIMA,Takashi ARAGAKI,Hiroki Adachi,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Retardation of Softening of Ultrafine-Grained Copper during Low Temperature Annealing under Uniaxial Tensile Stress",,"Materials Transactions",,"Vol. 53","No. 1","pp. 96-100",2012,Jan.
"Satoshi Hata,M. Shimizu,R. Akiyoshi,M. Mitsuhara,Ken-ichi Ikeda,Y. Miyajima,H. Nakashima,M. Kato","Electron Tomography Observation of Dislocations Near a Symmetric Tilt Boundary in a Deformed Mo Bicrystal","The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials",,,,,,2012,
"Yukito Nakanishi,Yoji MIYAJIMA,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Stability of Fatigued Dislocation Structure in UFG Aluminum against Monotonic Tensile  Deformation","International Workshop on Bulk Nanostructured Metals",,,,,,2012,
"Yoji MIYAJIMA,Midori Uchiyama,TOSHIYUKI FUJII,Susumu ONAKA,Masaharu KATO","Effect of additional shear stress on texture evolution during ARB process","International Workshop on Bulk Nanostructured Metals","Materials Transactions",,,,,2012,
"Yoji MIYAJIMA,Hiroki Abe,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Relationship between mechanical properties and microstructure in ultrafine-grained Cu-Si alloy processed by accumulative roll bonding","International Workshop on Bulk Nanostructured Metals",,,,,,2012,
"Satoshi Okubo,Yoji MIYAJIMA,Toshiyuki FUJII,Susumu ONAKA,Masaharu KATO","Low temperature creep behavior of ultrafine-grained Cu","International Workshop on Bulk Nanostructured Metals",,,,,,2012,
"Nobuhiro Tsuji,Y. Takatsuji,Y. Miyajima,P. P. Bhattacharjee,Daisuke Terada","Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel",,"Mater Sci Forum",,"Vol. 702-703",,"pp. 402-405",2011,Dec.
"Y. Miyajima,D. Kashioka,Nobuhiro Tsuji","Texture evolution in ARB processed commercial purity aluminium",,"Mater Sci Forum",,"Vol. 702-703",,"pp. 173-176",2011,Dec.
"Y. Miyajima,Yann Tison,C. E.  Giusca,Vlad Stolojan,H. Watanabe,Hitoe Habuchi,S. J.  Henley,Jhon M. Shannon,S Ravi P Silva","Probing the band structure of hydrogen-free amorphous carbon and the effect of nitrogen incorporation",,"Carbon",,"Vol. 49",,"pp. 5229-5238",2011,July
"K. Kashihara,W. Ikushima,Y. Miyajima,Daisuke Terada,Nobuhiro Tsuji","Change in Crystal Orientations of a {100} < 001 > Pure Aluminum Single Crystal during Accumulative Roll Bonding",,"Mater Trans",,"Vol. 52",,"pp. 825-829",2011,Apr.
"Y. Miyajima,S. J.  Henley,S Ravi P Silva","Hydrogenated amorphous carbon and carbon nitride films deposited at low pressure by plasma enhanced chemical vapor deposition",,"Thin Solid Films",,"Vol. 519",,"pp. 6374-6380",2011,Apr.
"T. Miyazaki,Daisuke Terada,Y. Miyajima,C. Suryanarayana,R. Murao,Y. Yokoyama,K. Sugiyama,M. Umemoto,Y. Todaka,Nobuhiro Tsuji","Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion",,"J Mater Sci",,"Vol. 46",,"pp. 4296-4301",2011,Jan.
"Akari Yoshida,Yoji Miyajima,TOSHIYUKI FUJII,SUSUMU ONAKA,MASAHARU KATO","Microstructural evolution caused by accumulative roll-bonding of Cu (100)[001] single crystals",,"Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM-2010)",,,,"p. 106",2010,Nov.
"Y. Miyajima,M.  Mitsuhara,Satoshi Hata,Hideharu Nakashima,Nobuhiro Tsuji","Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation",,"Mat Sci Eng a-Struct",,"Vol. 528",,"pp. 776-779",2010,Sept.
"Y. Miyajima,S. Y. Komatsu,M.  Mitsuhara,Satoshi Hata,Hideharu Nakashima,Nobuhiro Tsuji","Change in electrical resistivity of commercial purity aluminium severely plastic deformed",,"Philos Mag",,"Vol. 90",,"pp. 4475-4488",2010,July
"Y. Miyajima,M. Shkunov,S Ravi P Silva","Amorphous carbon and carbon nitride bottom gate thin film transistors",,"Appl Phys Lett",,"Vol. 95",,,2009,Sept.
"Y. Miyajima,S. J.  Henley,G. Adamopoulos,Vlad Stolojan,E. Garcia-Caurel,B. Drevillon,Jhon M. Shannon,S Ravi P Silva","Pulsed laser deposited tetrahedral amorphous carbon with high sp(3) fractions and low optical bandgaps",,"J Appl Phys",,"Vol. 105",,,2009,Apr.
"Y. Miyajima,G. Adamopoulos,S. J.  Henley,Vlad Stolojan,Yann Tison,E. Garcia-Caurel,B. Drevillon,Jhon M. Shannon,S Ravi P Silva","Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen",,"J Appl Phys",,"Vol. 104",,,2008,Sept.
"Y. Miyajima,A. A. D. T.  Adikaari,S. J.  Henley,J. M. Shannon,S. R. P. Silva","Electrical properties of pulsed UV laser irradiated amorphous carbon",,"Appl Phys Lett",,"Vol. 92",,,2008,Apr.
"Y. Miyajima,Jhon M. Shannon,S. J.  Henley,Vlad Stolojan,D. C.  Cox,S Ravi P Silva","Electrical conduction mechanism in laser deposited amorphous carbon",,"Thin Solid Films","Elsevier","Volume 516",,"Page 257-261",2007,May
"Paul C P  Watts,Natacha Mureau,Zhenni Tang,Yoji Miyajima,J David Carey,S Ravi P Silva","The importance of oxygen-containing defects on carbon nanotubes for the detection of polar and non-polar vapours through hydrogen bond formation",,"Nanotechnology","IOP Science","Volume 18","Number 17",,2007,Apr.
"Y. Miyajima,Shoji Nitta,S Ravi P Silva,D. A. Zeze","Surface induced bulk modifications of amorphous carbon nitride films by post-deposition oxygen and hydrogen plasma treatment",,"Thin Solid Films","Elsevier","Volume 491",,"Page 161-167",2005,July