論文

• Toshiyuki Obikawa, Yasuhiro Kamata, Jun Shinozuka. High Speed Grooving with Applying MQL, International Journal of Machine Tools and Manufacture, Vol. 46, No. 14, pp. 1854-1861, 2006.
• 篠塚　淳, 内海幸治, ﾊﾞｽﾃｨ ｱﾘ, 帯川利之. 薄膜熱電対内蔵型切削工具による工具すくい面温度分布の測定, 日本機械学会論文集（C編）, Vol. 72, No. 717, pp. 1687-1694, 2006.
• Yoshifumi Ohbuchi, Toshiyuki Obikawa. Surface Generation Model in Grinding with Effect of Grain Shape and Cutting Speed, JSME International Journal (Series C), Vol. 49, No. 1, pp. 114-120, 2006.
• 帯川利之, 釜田康裕, 篠塚淳. 高速・高能率溝入れ加工におけるMQLの効果, 日本機械学会論文集（C編）, Vol. 71, No. 701, pp. 311-318, 2005.
• J. Shinozuka, T. Obikawa. Development of Orthogonal Impact Cutting Testing Machine, Key Engineering Materials, Vol. 291-292, pp. 507-512, 2005.
• T. Obikawa, Y. Kamata. MQL Cutting of Inconel 718 with a Super Lattice Coating Tool, Key Engineering Materials, Vol. 291-292, pp. 433-438, 2005.
• T. Obikawa, J. Shinozuka. Analysis of Grinding Temperature Considering Surface Generation Mechanism, Key Engineering Materials, Vol. 291-292, pp. 97-102, 2005.
• Weihong Li, Weiguo Gong, T. Obikawa, T. Shirakashi. A method of recognizing tool-wear states based on a fast algorithm of wavelet transform, Journal of Materials Processing Technology, Vol. 170, pp. 374-380, 2005.
• Y. Ohbuchi, T. Obikawa. Adiabatic shear in chip formation with negative rake angle, International Journal of Mechanical Sciences, Vol. 47, pp. 1377-1392, 2005.
• 釜田康裕, 帯川利之. MQL溝入れ加工におけるミストの流れと工具摩耗, 精密工学会誌, Vol. 71, No. 6, pp. 734-738, 2005.
• 萩原親作, 村上譲司, 佐野照雄, 帯川利之. ダイヤモンド砥粒先端エッジの評価に関する基礎的研究, 精密工学会誌, Vol. 71, No. 5, pp. 618-622, 2005.
• Y. Kamata, T. Obikawa, J. Shinozuka. Analysis of Mist Flow in MQL Cutting, Key Engineering Materials, Vol. 257, pp. 339-344, 2004.
• J. Shinozuka, T. Obikawa. Development of Cutting Tools with Built-In Thin Film Thermocouples, Key Engineering Materials, Vol. 257, pp. 547-552, 2004.
• Weiguo Gong, Weihong Li, T. Shirakashi, T. Obikawa. An active method of monitoring tool wear states by impact diagnostic excitation, International Journal of Machine Tools and Manufacture, Vol. 44, No. 8, pp. 847-854, 2004.
• Toshiyuki Obikawa, Jun Shinozuka. Monitoring of flank wear of coated tool in high speed machining with a neural network ART2, International Journal of Machine Tools and Manufacture, Vol. 44, No. 12, pp. 1311-1318, 2004.
• Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi. Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models, International Journal of Machine Tools and Manufacture, Vol. 44, No. 7, pp. 815-822, 2004.
• 篠塚　淳, 帯川利之, 李　成発. 超高速切削過程における衝撃波と切削機構, 日本機械学会論文集（C編）, Vol. 69, No. 680, pp. 1123-1130, 2003.
• Takahiro Shirakashi, Toshiyuki Obikawa. Feasibility of gentle mode machining of brittle materials and its condition, Journal of Materials Processing Technology, Vol. 138, No. 1, pp. 522-526, 2003.
• Y. Ohbuchi, T. Obikawa. Finite Element Modeling of Chip Formation in the Domain of Negative Rake Angle Cutting, Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 125, No. 3, pp. 324 -332, 2003.
• 帯川利之, 李　成発, 篠塚　淳. 切削シミュレーションによるニッケル基超耐熱合金の被削性評価, 精密工学会誌, Vol. 69, No. 1, pp. 105-109, 2003.
• 大渕慶史, 帯川利之. 砥粒切削シミュレーションによる被研削性の解析的検討, 日本機械学会論文集（C編）, Vol. 68, No. 665, pp. 315-322, 2002.
• Shinsaku Hagiwara, Toshiyuki Obikawa. Evaluation of Edge Fracture Characteristics of Diamond Grains in Stone Grinding Processes, Machining Science and Technology, Vol. 6, No. 1, pp. 53-66, 2002.
• 大渕慶史, 帯川利之. 高速研削における砥粒切削状態の解析的予測, 精密工学会誌, Vol. 67, No. 6, pp. 910-915, 2001.
• 萩原親作, 帯川利之, 五味瑞樹, 松村 隆, 飯綱崇明, 由井明紀. 砥石ドレッシング音による加工状態の予測, 精密工学会誌, Vol. 67, No. 1, pp. 137-141, 2001.
• 大渕慶史, 帯川利之. 砥粒切削過程の有限要素シミュレーション－負のすくい角における切削状態の解析－, 精密工学会誌, Vol. 66, No. 9, pp. 1467-1471, 2000.
• 吉野雅彦, 帯川利之, 篠塚淳. 薄鋼鈑積層造形法によるRapid Manufacturing System, 日本機械学会論文集（Ｃ編）, Vol. 66, No. 642, pp. 313-318, 2000.
• T. Obikawa, M. Yoshino, J. Shinozuka. Sheet Steel Lamination for Rapid Manufacturing, Journal of Materials Processing Technology, Vol. 89, pp. 171-176, 1999.
• 萩原親作, 帯川利之, 田辺 亮. フラクタル次元に基づく砥粒切れ刃エッジの切削能力とその評価, 精密工学会誌, Vol. 65, No. 9, pp. 1350-1354, 1999.
• 白樫高洋, 帯川利之, 篠塚 淳, 吉野雅彦. 反力制御切削加工ヘッドの試作とその特性（第2報）, 日本機械学会論文集 (C), Vol. 65, No. 631, pp. 1223-1228, 1999.
• 帯川利之, 鹿子木修, 白樫高洋. 3次元温度数値解析による研削エネルギー分配率の検討（第2報）, 精密工学会誌, Vol. 64, No. 4, pp. 583-587, 1998.
• 笹原弘之, 帯川利之. 二相合金切削の有限要素法シミュレーション, 精密工学会誌, Vol. 64, No. 7, pp. 1083-1087, 1998.
• Toshiyuki OBIKAWA, Osamu KAKOKI, Takahiro SHIRAKASHI. Energy Flowing Rate into Workpiece in Surface Grinding Based on 3-Dimensional Temperature Analysis(2nd Report), Int. Journal of the Japan Society for Precision Engineering, Vol. 32, No. 1, pp. 19-24, 1998.
• 萩原親作, 本郷寛記, 帯川利之. ラッピング圧力による砥粒形状の変化とその評価, 精密工学会誌, Vol. 64, No. 2, pp. 292-296, 1998.
• Masahiko YOSHINO, Takahiro SHIRAKASHI, Toshiyuki OBIKAWA, Eiji USUI. Electrolytic Cut-off Grinding Machine for Composite Materials, Journal of Materials Processing Technology, Vol. 74, pp. 131-136, 1998.
• Takahiro SHIRAKASHI, Toshiyuki OBIKAWA. Recent Progress and Some Difficulties in Computational Modeling of Machining, Journal of Machining Science and Technology, Vol. 2, No. 2, pp. 277-301, 1998.
• S. Hagiwara, T. Obikawa, E. Usui. Edge Fracture Characteristic of Abrasive Grain, Journal of Manufacturing Science and Engineering, Transactions of ASME, Vol. 120, No. 4, pp. 708-714, 1998.
• T. Shirakashi, T. Obikawa. Numerical Simulation of Collision Process of High Speed Debris against Thin Plate, Journal de Physique IV, Vol. 7, No. C3, pp. 1027-1032, 1997.
• T. Obikawa, H. Sasahara, T. Shirakashi, E. Usui. Application of Computational Machining Method to Discontinuous Chip Formation, Journal of Manufacturing Science and Engineering, Transactions of ASME, Vol. 119, pp. 667-674, 1997.
• W. G. Gong, T. Obikawa, T. Shirakashi. Monitoring of Tool Wear States in Turning Based on Wavelet Analysis, JSME International Journal, Vol. 40, pp. 447-453, 1997.
• H. Sasahara, T. Obikawa, T. Shirakashi. Finite Element Modeling of Residual Stress Control on Machined Surface, Transactions of NAMRI/SME, Vol. 25, pp. 213-218, 1997.
• H. Hagiwara, S. Iwata, T. Obikawa, E. Usui. Study on the Transition Process of Diamond Grain Shape in Stone Grinding, Journal of Materials Processing Technology, Vol. 63, pp. 892-896, 1997.
• T. Obikawa, T. Matsumura, T. shirakashi, E. Usui. Wear Characteristic of Alumina Coated and Alumina Ceramic Tools, Journal of Materials Processing Technology, Vol. 63, pp. 211-216, 1997.
• T．Obikawa, E. Uusi. Computational Machining of Titanium Alloy -Finite Element Modeling and a Few Results-, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 118, No. 2, pp. 208-215, 1996.
• H. Maekawa, T. Shirakashi, T. Obikawa. Recent Progress of Computer-Aided Simulation of Chip Flow and Tool Damage in Metal Machining, IMechE Journal of Engineering Manufacture, Vol. 210, No. 5, pp. 233-242, 1996.
• T. Obikawa, H. Takahata, T. Shirakashi. Energy Flowing Rate into Workpiece in Surface Grinding Based on 3-Dimensional Temperature Analysis(1st Report), International Journal of the Japan Society for Precision Engineering, Vol. 30, No. 1, pp. 29-34, 1996.
• T. Obikawa, C. Kaseda, T. Matsumura, W.G. Gong, T. Shirakashi. Tool Wear Monitoring for Optimizing Cutting Conditions, Journal of Materials Processing Technology, Vol. 62, No. 4, pp. 374-379, 1996.
• J. Shinozuka, T. Obikawa, T. Shirakashi. Chip Breaking Analysis from the Viewpoint of the Optimum Tool Geometry Design, Journal of Materials Processing Technology, Vol. 62, No. 4, pp. 345-351, 1996.
• H. Sasahara, T. Obikawa, T. Shirakashi. FEM Analysis of Cutting Sequence Effect on Mechanical Characteristics in Machined Layer, Journal of Materials Processing Technology, Vol. 62, No. 4, pp. 448-453, 1996.
• 帯川利之, 高畑博之, 白樫高洋. ３次元温度数値解析による研削エネルギ分配率の検討（第1報）－細孔を利用した温度測定法の妥当性－, 精密工学会誌, Vol. 62, No. 1, pp. 90-94, 1996.
• 白樫高洋, ｺﾞﾝ 衛国, 帯川利之. 能動的方法による工具損傷のインプロセス検出（第2報）－減衰係数に及ぼす工具刃形と切削条件の影響－, 精密工学会誌, Vol. 62, No. 8, pp. 1146-1150, 1996.
• 篠塚 淳, 帯川利之, 白樫高洋. チップブレーカによる切りくず破断過程の熱弾塑性有限要素法シミュレーション, 精密工学会誌, Vol. 62, No. 8, pp. 1161-1166, 1996.
• 萩原親作, 岩田秀志, 帯川利之, 臼井英治. 石材研削におけるダイヤモンド砥粒形状の変化過程とその評価, 砥粒加工学会誌, Vol. 39, No. 3, pp. 149-154, 1995.
• 帯川利之, 篠塚 淳, 白樫高洋. 溝型すくい面工具の切削特性, 精密工学会誌, Vol. 61, No. 9, pp. 1295-1299, 1995.
• 笹原弘之, 帯川利之, 白樫高洋. 切削工程による加工変質層の推移と制御, 精密工学会誌, Vol. 61, No. 10, pp. 1453-1457, 1995.
• 白樫高洋, ｺﾞﾝ 衛国, 帯川利之. 能動的方法による工具損傷のインプロセス検出（第1報）－工具摩耗による振動減衰係数の推移－, 精密工学会誌, Vol. 61, No. 12, pp. 1750-1754, 1995.
• 萩原親作, 帯川利之, 谷内　浩. 形状特徴に基づくラッピング砥粒の評価, 精密工学会誌, Vol. 61, No. 12, pp. 1760-1764, 1995.
• 吉野雅彦, 帯川利之, 白樫高洋. 反力制御切削加工ヘッドの試作とその特性, 日本機械学会論文集 (C), Vol. 60, No. 577, pp. 2952-2957, 1994.
• 笹原弘之, 帯川利之, 白樫高洋, 臼井英治. 自励びびり振動における動的切削過程の非線形効果（第４報）, 精密工学会誌, Vol. 60, No. 4, pp. 565-569, 1994.
• 笹原弘之, 帯川利之, 白樫高洋. 切削加工変質層生成過程のシミュレーション解析（第3報）, 精密工学会誌, Vol. 60, No. 12, pp. 1801-1805, 1994.
• 白樫高洋, 吉野雅彦, 帯川利之, 堀江　琢. 研削加工層の残留応力に及ぼす流動応力特性の影響, 日本機械学会論文集 (C), Vol. 60, No. 577, pp. 2946-2951, 1994.
• 萩原親作, 帯川利之, 岩田秀志, 臼井英治. 石材研削におけるダイヤモンド砥粒の破砕性, 日本機械学会論文集 (C), Vol. 60, No. 577, pp. 2917-2923, 1994.
• Takashi Matsumura, Toshiyuki Obikawa, Takahiro Shirakashi, Eiji Usui. An Adaptive Prediction of Machining Accuracy in Turning Operation, Transactions of NAMRI/SME, Vol. 22, pp. 305-312, 1994.
• Eiji Usui, Toshiyuki Obikawa, Shinsaku Hagiwara. Study on Edge Fracture of Abrasive Grain during Grinding with Applying the Theory of Markov Process (2nd Report), International Journal of the Japan Society for Precision Engineering, Vol. 28, No. 2, pp. 111-116, 1994.
• Hiroyuki Sasahara, Toshiyuki Obikawa, Takahiro Shirakashi. FEM Analysis on Three Dimensional Cutting, International Journal of the Japan Society for Precision Engineering, Vol. 28, No. 2, pp. 123-128, 1994.
• Takahiro Shirakashi, Hiroyuki Sasahara, Toshiyuki Obikawa, Takeshi Wada. The Analytical Prediction of Residual Stress within Machined Sublayer and Its Effect on Accuracy, International Journal of the Japan Society for Precision Engineering, Vol. 28, No. 3, pp. 200-205, 1994.
• Toshiyuki Obikawa, Shinsaku Hagiwara, Eiji Usui. Study on Edge Fracture of Abrasive Grain during Grinding with Applying the Theory of Markov Process (3rd Report), International Journal of the Japan Society for Precision Engineering, Vol. 28, No. 3, pp. 206-211, 1994.
• 白樫高洋, 帯川利之, 笹原弘之, 和田武司. 切削加工変質層生成過程のシミュレーション解析（第２報）, 精密工学会誌, Vol. 59, No. 12, pp. 2003-2008, 1993.
• 帯川利之, 松村 隆, 田中浩征, 白樫高洋, 臼井英治. コーテッド工具のすくい面摩耗予測, 精密工学会誌, Vol. 59, No. 1, pp. 143-148, 1993.
• 帯川利之, 田口克行, 笹原弘之, 白樫高洋, 臼井英治. せん断形切りくず生成の有限要素法シミュレーション, 精密工学会誌, Vol. 59, No. 5, pp. 821-826, 1993.
• 帯川利之, 臼井英治. Ti合金（Ti-6Al-4V）の鋸歯状切りくず生成のFEMシミュレーション（第２報）, 精密工学会誌, Vol. 59, No. 6, pp. 933-938, 1993.
• 松村 隆, 帯川利之, 白樫高洋, 臼井英治. 切削加工の自律型作業設計, 精密工学会誌, Vol. 59, No. 10, pp. 1676-1682, 1993.
• Takashi Matsumura, Toshiyuki Obikawa, Takahiro Shirakashi, Eiji Usui. Autonomous Turning Operation Planning with Predicting Tool Wear and Surface Roughness, Transactions of NAMRI/SME, Vol. 21, pp. 359-366, 1993.
• 白樫高洋, 帯川利之, 笹原弘之, 和田武司. 切削加工変質層生成過程のシミュレーション解析(第1報), 精密工学会誌, Vol. 59, No. 10, pp. 1695-1700, 1993.
• 笹原弘之, 帯川利之, 白樫高洋. 三次元切削の有限要素法シミュレーション, 精密工学会誌, Vol. 59, No. 8, pp. 1275-1280, 1993.
• 帯川利之, 笹原弘之, 白樫高洋, 臼井英治. 自励びびり振動における動的切削過程の非線形効果(第3報), 精密工学会誌, Vol. 59, No. 7, pp. 1151-1156, 1993.
• Takashi Matsumura, Toshiyuki Obikawa, Takahiro Shirakashi, Eiji Usui. Autonomous Turning Operation Planning with Adaptive Prediction of Tool Wear and Surface Roughness, Journal of Manufacturing Systems, Vol. 12, No. 3, pp. 253-262, 1993.
• 帯川利之, 臼井英治. Ti合金（Ti-6Al-4V）の鋸歯状切りくず生成のFEMシミュレーション（第１報）, 精密工学会誌, Vol. 58, No. 6, pp. 1072-1078, 1992.
• 松村 隆, 吉野雅彦, 帯川利之, 白樫高洋, 臼井英治. 最適切削条件選定用エキスパートシステムの開発に関する研究（第３報）, 精密工学会誌, Vol. 58, No. 4, pp. 661-666, 1992.
• 白樫高洋, 吉野雅彦, 帯川利之, 臼井英治. 電解複合切断法の基本特性とアモルファスコアへの適用, 精密工学会誌, Vol. 58, No. 3, pp. 513-515, 1992.
• 松村 隆, 帯川利之, 白樫高洋, 臼井英治. 最適切削条件選定用エキスパートシステムの開発に関する研究（第４報）, 精密工学会誌, Vol. 58, No. 10, pp. 1691-1696, 1992.
• 松村 隆, 帯川利之, 白樫高洋, 臼井英治. 切削加工の適応予測, 精密工学会誌, Vol. 58, No. 12, pp. 2044-2050, 1992.
• 帯川利之, 笹原弘之, 臼井英治. チップブレーカ作用の有限要素法解析, 精密工学会誌, Vol. 58, No. 12, pp. 2051-2056, 1992.
• 帯川利之, 松村隆, 白樫高洋. Al┣D22┫D2O┣D23┫D2/SiCwの摩擦・摩耗の異方性, 粉体および粉末冶金, Vol. 39, No. 1, pp. 65-71, 1992.
• 呉 進, 帯川利之, 臼井英治. 接触面積拘束工具のびびり振動抑制効果(第2報), 精密工学会誌, Vol. 57, No. 1, pp. 161-165, 1991.
• 帯川利之, 白樫高洋, 臼井英治. FRP切削の有限要素法シミュレーション, 精密工学会誌, Vol. 57, No. 6, pp. 1029-1034, 1991.
• 松村 隆, 帯川利之, 白樫高洋, 臼井英治. 最適切削条件選定用エキスパートシステムの開発に関する研究(第2報), 精密工学会誌, Vol. 57, No. 6, pp. 1053-1059, 1991.
• 臼井英治, 呉 進, 帯川利之. 接触面積拘束工具のびびり振動抑制効果（第１報）, 精密工学会誌, Vol. 56, No. 2, pp. 329-335, 1990.
• 帯川利之, 松村 隆, 臼井英治. 切れ刃離脱時の非定常切削過程と欠損の発生（第１報）, 精密工学会誌, Vol. 56, No. 2, pp. 336-342, 1990.
• 臼井英治, 帯川利之, 松村 隆. 切れ刃離脱時の非定常切削過程と欠損の発生(第2報), 精密工学会誌, Vol. 56, No. 5, pp. 911-916, 1990.
• 臼井英治, 帯川利之, 笹原弘之, 白樫高洋. 自励びびり振動における動的切削過程の非線形効果（第２報）, 精密工学会誌, Vol. 56, No. 4, pp. 661-666, 1990.
• 萩原親作, 帯川利之, 臼井英治. ドレッシングにおける砥粒切れ刃の形状分布, 精密工学会誌, Vol. 56, No. 1, pp. 164-168, 1990.
• 萩原親作, 帯川利之, 臼井英治. 各種砥粒材種の破砕特性とその評価, 精密工学会誌, Vol. 55, No. 3, pp. 551-556, 1989.
• 帯川利之, 萩原親作, 臼井英治. 研削における砥粒破砕のマルコフ過程的解析(第5報), 精密工学会誌, Vol. 54, No. 7, pp. 1291-1297, 1988.
• 帯川利之, 萩原親作, 臼井英治. 研削における砥粒破砕のマルコフ過程的解析（第４報）, 精密工学会誌, Vol. 54, No. 4, pp. 749-754, 1988.
• Eiji Usui, Toshiyuki Obikawa, Shinsaku Hagiwara. Study on Edge Fracture of Abrasive Grain during Grinding with Applying the Theory of Markov Process (1st Report), Bulletin of the Japan Society of Precision Engineering, Vol. 22, No. 2, pp. 95-101, 1988.
• 帯川利之, 安味貞正, 白樫高洋, 臼井英治. 高分子材料の切削過程の有限要素法解析（その１）, 精密工学会誌, Vol. 53, No. 2, pp. 288-294, 1987.
• 帯川利之, 白樫高洋, 臼井英治. 快削添加物粒子のぜい性効果（その２）, 精密工学会誌, Vol. 53, No. 7, pp. 1057-1063, 1987.
• 臼井英治, 帯川利之, 白樫高洋. 難削材の切削過程の解析(第2報), 精密工学会誌, Vol. 52, No. 9, pp. 1623-1630, 1986.
• 帯川利之, 萩原親作, 臼井英治. 研削における砥粒破砕のマルコフ過程的解析（第３報）, 精密工学会誌, Vol. 52, No. 4, pp. 685-691, 1986.
• 帯川利之, 白樫高洋, 臼井英治. 難削材の切削過程の解析（第１報）, 精密工学会誌, Vol. 52, No. 1, pp. 127-133, 1986.
• 臼井英治, 帯川利之, 萩原親作. 研削における砥粒破砕のマルコフ過程的解析（第２報）, 精密機械, Vol. 51, No. 2, pp. 428-434, 1985.
• 安味貞正, 益子正巳, 帯川利之, 白樫高洋, 臼井英治. 高分子材料の変形応力特性（第１報）, 精密機械, Vol. 51, No. 4, pp. 790-795, 1985.
• 臼井英治, 帯川利之, 萩原親作. 研削における砥粒破砕のマルコフ過程的解析（第１報）, 精密機械, Vol. 50, No. 10, pp. 1652-1658, 1984.
• 臼井英治, 井原 透, 金沢憲一, 帯川利之, 白樫高洋. 円板圧縮破壊試験による脆性材料の強度評価の一試案, 材料科学, Vol. 19, No. 4, pp. 238-243, 1982.
• 臼井英治, 北川武揚, 前川克廣, 帯川利之, 白樫高洋. 切削工具寿命の解析的予測に関する研究（第３報）, 精密機械, Vol. 48, No. 9, pp. 1231-1237, 1982.
• 臼井英治, 帯川利之, 白樫高洋. 快削添加物粒子のぜい性効果（その1）, 精密機械, Vol. 46, No. 7, pp. 849-855, 1980.
• 臼井英治, 白樫高洋, 帯川利之. 切削油剤作用の力学的シミュレーション, 精密機械, Vol. 43, No. 9, pp. 1063-1068, 1977.

著書

• 帯川利之, 笹原弘之, 池野順一, 大竹尚登, 国枝正典, 長藤圭介, 新野俊樹. はじめての生産加工学２, 講談社, June 2016.
• 安永暢男, 帯川利之, 厨川常元, 渡邉純二, 渡部武弘, 森田　昇. 超精密加工の基礎と実際, 日刊工業新聞社, Feb. 2006.
• 帯川利之他. 機械加工ハンドブック, 朝倉書店, 2006.
• 安永暢男, 帯川利之, 厨川常元, 渡邉純二, 渡部武弘, 森田　昇. 超精密加工の基礎と実際, 日刊工業新聞社, 2006.
• 帯川利之他. 機械工学便覧B2加工学・加工機器, 日本機械学会, 2006.
• 帯川利之（分担）. 金属学会編，金属便覧（改訂6版）, 丸善, 丸善, 2000.
• Thomas H.C. CHILDS, Katsuhiro MAEKAWA, Toshiyuki OBIKAWA, Yasuo YAMANE. Metal Machining - Theory and Application, Arnold, Arnold, pp. 177-198, 265-327, 396-400, 2000.
• 帯川利之（分担）. 精密工学会編，精密加工実用便覧, 日刊工業新聞社, 日刊工業新聞社, 2000.
• 中沢弘, 帯川利之, 他. 生産加工の原理, 日刊工業新聞社, 日刊工業新聞社, 1998.
• 帯川利之（分担）. 機械工学事典, 日本機械学会, 日本機械学会, 1997.
• 帯川利之（分担）. 切削・研削・研磨用語辞典, 工業調査会, 工業調査会, 1995.
• 帯川利之. やさしい生産加工技術101選(共著), 工業調査会, 工業調査会, 1992.

国際会議発表 (査読なし・不明)

• Toshiyuki Obikawa, Shunsuke Satou, Yasuhiro Kunieda, Jun Shinozuka. Ductile-Brittle Mode Transition in End Milling of Glass, 2006 International Symposium on Flexible Automation, Proceedings of 2006 International Symposium on Flexible Automation, pp. 104-107, July 2006.
• Y. Kamata, T. Obikawa. High speed MQL finish-turning of Inconel 718 with different coated tools, Proceedings of the Seventh Asia Pacific conference on Material Processing, Singapore, pp. 321-326, 2006.
• Yasuhiro Kamata, Kousuke Nakayama, Jun Shinozuka, Toshiyuki Obikawa. Effects of Pinpoint Oil Mist Jet on Flank Wear in Turning of Inconel 718, Proceedings of the Eighth International Conference on Progress of Machining Technology (ICPMT’2006), Matsue, pp. 145-148, 2006.
• A. Basti, T. Obikawa, J. Shinozuka. Tools with Built-in Thin Film Thermocouple Sensors for Monitoring Cutting Temperature, Proceedings of the First Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, pp. 1-8, Dec. 2005.
• Toshiyuki Obikawa. High Speed Machining, Advances in Machining Technology, Proceedings of the Seventh International Workshop, Department of Mechanical Science and Engineering, Tokyo Institute of Technology, pp. 33-42, 2005.
• Yoshifumi Ohbuchi, Toshiyuki Obikawa. Surface Generation Model in Grinding with Effect of Grain Shape and Cutting Speed, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Nagoya, Vol. 2, 595-600, 2005.
• Toshiyuki Obikawa, Hiroyuki Sasahara, Takahiro Shirakashi. Basic Nonlinearity of Tool Chatter Vibration, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Nagoya, Vol. 1, pp. 169-172, 2005.
• T. Shirakashi, J. Shinozuka, T. Obikawa. Simulation Analysis on Chip Breaking Process by Grooved Tool, Proceedings of the Eighth International ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, pp. 733-736, 2005.
• Obikawa, T., Shinozuka, J., Sonoda, T., Sasajima, K.. Development of cutting simulator for end milling, Proceedings of the Seventh International Conference on Progress of Machining Technology (ICPMT’2004), Suzhou, Progress of Machining Technology, ed. W. Chen et al., Aviation Industry Press, pp. 753-758, 2004.
• T. Obikawa, J. Shinozuka, H. Nakamoto. Monitoring of High Speed Machining States with an Neural Network ART2, Proceedings of the International Conference on Leading Edge Manufacturing in　21st Century, pp. 669-674, 2003.
• Yoshifumi Ohbuchi, Toshiyuki Obikawa. Thermal Aspects of Abrasive Grain Machining Processes, Proceedings of the NSF Workshop on Researches Needs in Thermal Aspects of Material Removal Processes, edited Ranga Komanduri, Stillwater, pp. 228-239, 2003.
• T. Matsumura, T. Obikawa, T. Shirakashi, E. Usui. On the Development of Cutting Process Simulator for Turning Operation, Proceedings of the Sixth International ESAFORM Conference on Material Forming, edited V. Brucato, Salerno, pp. 519-522, 2003.
• T. Obikawa. Finite Element Modeling of Machining Processes with Fracture or Adiabatic Shear of Work Materials, Abstracts of the Fourth International Conference of Mechanics and Materials in Design, Nagoya, pp. 57-58, 2002.
• Toshiyuki Obikawa, Chengfa Li, Jun Shinozuka. Finite Element Analysis of Machining Nickel-base Superalloy, Proceedings of the Sixth International Conference on Progress of Machining Technology (6th ICPMT), Xi'an, Progress of Machining Technology, ed. D. Chen et al., Aviation Industry Press, pp. 772-777, 2002.
• T. Shirakashi, T. Obikawa, H. Sasahara. Estimation of residual stress distribution in machined surface and its control through FEM simulation, Proceedings of the Forth International ESAFORM Conference on Material Forming, Liege, pp. 639-641, 2001.
• J. Shinozuka, M. Yoshino, T. Obikawa. Machine Parts Manufacturing by Sheet Steel Lamination Technology, Proceedings of the Tenth International Conference on Precision Engineering (10th ICPE), Yokohama, Initiatives of Precision Engineering at the Beginning of a Millenium, I. Inasaki, ed., pp. 127-131, 2001.
• Takahiro SHIRAKASHI, Toshiyuki OBIKAWA. Feasibility of Gentle Machining of Brittle Materials and Its Condition, the Ninth International Manufacturing Conference in China (IMCC'2000), Hong Kong, Proceedings of the Ninth International Manufacturing Conference in China (IMCC'2000), Hong Kong, pp. 161-171, 2000.
• Toshiyuki OBIKAWA, Jun SHINOZUKA, Hiroshi KIKUCHI, Keiji YOSHINO, Koh TANABE, Hiroyuki SASAHARA, Takahiro SHIRAKASHI. Finite Element Modeling of Machining with a Helical End Mill, Proceedings of the Fifth International Conference on Progress of Machining Technology (ICPMT'2000), Beijing, pp. 715-720, 2000.
• Jun Shinozuka, Toshiyuki Obikawa. Simulation Analysis of Hyper Velocity Machining, Proceedings of the Third International Conference on Abrasive Technology (ABTEC’99), Brisbane, Abrasive Technology, ed. J. Wang et al., World Scientific, Singapore, pp. 378-385, 1999.
• H. Sasahara, T. Obikawa, T. Shirakashi. Control of Residual Stress within Machined Surface Layer on Face Turning, Proceedings of the US-Japan Symposium on High-Efficiency, Damage-Free Finishing of Advanced Materials, Stillwater, pp. 71-81, 1999.
• S. Hagiwara, T. Obikawa, E. Usui. Evaluation of Edge Fracture Characteristics of Diamond Grain in Stone Grinding Processes, Proceedings of the US-Japan Symposium on High-Efficiency, Damage-Free Finishing of Advanced Materials, Stillwater, pp. 83-93, 1999.
• T. Obikawa, J. Shinozuka. Assessment of Cutting Temperature in Machining of Ceramics, Proceedings of the US-Japan Symposium on High-Efficiency, Damage-Free Finishing of Advanced Materials, Stillwater, pp. 245-256, 1999.
• Takahiro SHIRAKASHI, Toshiyuki OBIKAWA, Jun SHINOZUKA. Development of Intelligent Milling Head, Proceedings of the Fourth International Conference on Progress of Cutting and Grinding (ICPCG’98), Progress of Cutting and Grinding, ed. N. Narutaki et al., Vol. 4, pp. 344-349, 1998.
• Masahiko YOSHINO, Toshiyuki OBIKAWA, Jun SHINOZUKA, Yuki HANAWA, Fumitoshi ITO. Mechanical Properties of Laminated Sheet Steel Products by Rapid Manufacturing System, Proceedings of the Fourteenth International Conference on Computer-Aided Production Engineering (CAPE’98), Tokyo, pp. 271-276, 1998.
• Toshiyuki OBIKAWA, Masahiko YOSHINO, Takashi MATSUMURA, Hiroyuki SASAHARA, Jun SHINOZUKA, Koji FURUSAWA. Rapid Manufacturing System by Sheet Steel Lamination, Proceedings of the Fourteenth International Conference on Computer-Aided Production Engineering (CAPE’98), Tokyo, pp. 265-270, 1998.
• Takahiro SHIRAKASHI, Toshiyuki OBIKAWA. Recent Progress of Computational Modeling and Some Difficulties, Proceedings of CIRP International Workshop on Modeling of Machining Operations, Atlanta, No. 2B1, pp. 1-12, 1998.
• Takahiro SHIRAKASHI, Toshiyuki OBIKAWA. Energy Flowing Rate into Work in Surface Grinding, Proceedings of the Eighth International Manufacturing Conference (IMCC’98), Singapore, pp. 366-371, 1998.
• OBIKAWA, T., MATSUMURA, T., SHIRAKASHI, T., USUI, E.. Analytical Prediction of Crater Wear of Multi-Layer Coated Tools, Proceedings of the International Conference on Precision Engineering (ICPE’97, 3rd ICMT), Taipei, pp. 473-478, 1997.
• SASAHARA, H., OBIKAWA, T., SHIRAKASHI, T.. FEM Simulation on Machining Process of Two Phase Alloy, Proceedings of the International Conference on Precision Engineering (ICPE’97, 3rd ICMT), Taipei, pp. 467-472, 1997.
• Jun SHINOZUKA, Toshiyuki OBIKAWA, Takahiro SHIRAKASHI. A CAE System for High Performance Metal Cutting Tool Geometry, Proceedings of the International Conference on Precision Engineering (ICPE’97, 3rd ICMT), Taipei, pp. 941-946, 1997.
• T. SHIRAKASHI, W.G. GONG, T. OBIKAWA. In-Process Monitoring of Cutting Tool Wear Using Damping Coefficient, The Third International Conference on Progress of Cutting and Grinding (ICPCG’96), Osaka, Proceedings of the Third International Conference on Progress of Cutting and Grinding (ICPCG’96), Osaka, Progress of Cutting and Grinding, N. Narutaki et al. ed., Vol. 3, pp. 311-316, 1996.
• S. HAGIWARA, T. OBIKAWA, E. USUI. Edge Shape Distribution on Dressed Grinding Wheel Surface, ICPE’95, Singapore, Proc. ICPE’95, Singapore, pp. 9-12, 1995.
• T. OBIKAWA, T. SHIRAKASHI, E. USUI. Finite Element Modeling of Machining of Glass Fiber Reinforced Plastics, 31st MATADOR Conference, Proceedings of 31st MATADOR Conference, Manchester, Vol. 31, pp. 223-228, 1995.
• K. MAEKAWA, T. SHIRAKASHI, T. OBIKAWA. Computer-Aided Simulation of Chip Flow and Tool Damage in Metal Machining, ICES’95, Proc. ICES’95, Computational Mechanics’95, S.N. Atluri et al. ed., Springar, New York, pp. 2105-2110, 1995.
• T. SHIRAKASHI, W.G. GONG, T. OBIKAWA. In Process Monitoring of Tool Wear by Diagnostic Impulse Excitation, IMCC’95, Proc. IMCC’95, No. 2, pp. 1-6, 1995.
• T. OBIKAWA, W.N. LIU, T. SHIRAKASHI. Prediction of Cutting Temperature and Flank Wear Rate for Practical Use Using Personal Computer, IMCC’95, Proc. IMCC’95, No. 2, pp. 55-60, 1995.
• J. SHINOZUKA, T. OBIKAWA, T. SHIRAKASHI. Chip Breaking Analysis from the View Point of the Optimum Tool Geometry Design, ICPE’95, Singapore, Proc. ICPE’95, Singapore, pp. 323-326, 1995.
• H. SASAHARA, T. OBIKAWA, T. SHIRAKASHI. FEM Analysis of Cutting Sequence Effect on Mechanical Characteristics in Machined Layer, ICPE’95, Singapore, Proc. ICPE’95, Singapore, pp. 581-584, 1995.
• T. OBIKAWA, C. KASEDA, W.G. GONG, T. SHIRAKASHI, T. MATSUMURA. Tool Wear Monitoring for Optimizing Cutting Condidions, ICPE’95, Singapore, Proc. ICPE’95, Singapore, pp. 630-633, 1995.
• T. SHIRAKASHI, T. OBIKAWA. Effect of Measuring Method on Temperature Distribution within Work in Surface Grinding, 2nd Int. ABTEC Conf., Proc. 2nd Int. ABTEC Conf., pp. 227-234, 1995.
• T. Obikawa, T. Shirakashi. Analysis of Metal Cutting and Its Application to Machining Operation Planning, Proc. ICPE’95, Keynote Papers and Invited Papers, pp. 51-58, 1995.
• H. Sasahara, T. Obikawa, T. Shirakashi. The Prediction of Effects of Cutting Condition on Mechanical Characteristics in Machined Layer, The Seventh International Conference on Production/Precision Engineering, Chiba, Proceedings of the Seventh International Conference on Production/Precision Engineering, Chiba, Advancement of Intelligent Production, E. Usui ed., Elsevier, Amsterdam, pp. 473-478, 1994.
• Masahiko Yoshino, Takahiro Shirakashi, Toshiyuki Obikawa. Numerical Analysis of Residual Stress in a Ground Surface Layer, The Seventh International Conference on Production/Precision Engineering, Chiba, Proceedings of the Seventh International Conference on Production/Precision Engineering, Chiba, Advancement of Intelligent Production, E. Usui ed., Elsevier, Amsterdam, pp. 497-502, 1994.
• Takahiro Shirakashi, Masahiko Yoshino, Toshiyuki Obikawa. Gang Milling Head for Controlling Resultant Cutting Force, The First Asia-Pacific and Second Japan-China International Conference on Progress of Cutting and Grinding (ICPCG’94), Shanghai, Proceedings of the First Asia-Pacific and Second Japan-China International Conference on Progress of Cutting and Grinding (ICPCG’94), Shanghai, Progress of Cutting and Grinding, N. Narutaki et al. ed., International Academic Publishers, Beijing, pp. 314-319, 1994.
• J. Shinozuka, T. Obikawa, T. Shirakashi. Cutting Performance of Tools with Curved Rake Face, The Seventh International Conference on Production/Precision Engineering, Chiba, Proceedings of the Seventh International Conference on Production/Precision Engineering, Chiba, Advancement of Intelligent Production, E. Usui ed., Elsevier, Amsterdam, pp. 379-384, 1994.
• T. Matsumura, T. Obikawa, T. Shirakashi, E. Usui. An Adaptive Prediction of Machining Processes, International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, Proceedings of International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, pp. 391-396, 1993.
• T. Obikawa, J. Shinozuka, T. Shirakashi. FEM Analysis on Cutting Performance of Tools with Secondary Rake Face, International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, Proceedings of International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, pp. 21-26, 1993.
• H. Sasahara, T. Obikawa, T. Shirakashi. 3-D FEM Analysis on Large Chip Deformation at Tool Entry, International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, Proceedings of International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, pp. 7-12, 1993.
• M. Yoshino, T. Obikawa, T. Shirakashi. Ductile Mode Cutting of Glass, International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, Proceedings of International Conference on Machining Technology in Asia and Pacific Regions (ICMT’93), Guangzhou, pp. 1-6, 1993.
• Takahiro Shirakashi, Hiroyuki Sasahara, Toshiyuki Obikawa. The Prediction of the Mechanical State of Machined Surface by FEM, Proceedings of the Sixth International Manufacturing Conference in China (IMCC’93), Vol. 2, pp. 65-70, 1993.
• Takashi Matsumura, Toshiyuki Obikawa, Takahiro Shirakashi, Eiji Usui. Computer Aided Optimization of Machining Process with Tool Failure, The Third International Conference on High Technology, Chiba, Proceedings of the Third International Conference on High Technology, Chiba, pp. 409-414, 1992.
• E. Usui, T. Obikawa, T. Shirakashi. Study on Chip Segmentation in Machining Titanium Alloy, The Fifth International Conference on Production Engineering, Tokyo, Proceedings of the Fifth International Conference on Production Engineering, Tokyo, pp. 233-239, 1984.
• T. Obikawa, S. Ramalingam. Computation of the Temperature Field Generated during Extrusion/Drawing of Rigid, Perfectly Plastic Materials with and without Die-Wall Friction, The Fifth International Conference on Production Engineering, Tokyo, Proceedings of the Second International Computer Engineering Conference, San Diego, Computers in Engineering 1982, T. J. Cokonis et al. ed., ASME, New York, Vol. 1, pp. 185-198, 1982.
• E. Usui, T. Obikawa, T. Shirakashi. Embrittling Effect of MnS in Free-Machining Steel, The Tenth North American Manufacturing Research Conference, Hamilton, Proceedings of the Tenth North American Manufacturing Research Conference, Hamilton, pp. 247-254, 1982.

その他の論文・著書など

• 帯川利之. 切削四話, 精密工学会誌, Vol. 69, No. 10, pp. 1397-1400, 2003.
• 帯川利之. 難削材切削加工技術の本質と特異性(１), 機械の研究, Vol. 54, No. 2, pp. 227-235, 2002.
• 帯川利之. 難削材切削加工技術の本質と特異性(２), 機械の研究, Vol. 54, No. 3, pp. 362-369, 2002.
• 帯川利之, 篠塚 淳. 機械加工とトライボロジー, 精密工学会誌, Vol. 67, No. 12, pp. 1937-1940, 2001.
• 帯川利之. 難削材加工の基本戦略, ツールエンジニア, Vol. 41, No. 5, pp. 56-61, 2000.
• 帯川利之. 研削加工における工作物温度とエネルギ配分率の求め方, 砥粒加工学会誌, Vol. 42, No. 2, pp. 51-55, 1998.
• 帯川利之, 松村 隆. 切削加工技術の可視化，適応，最適化, 精密工学会誌, Vol. 60, No. 5, pp. 641-646, 1994.
• 帯川利之, 白樫高洋. 機械加工現象のシミュレーション, 日本機械学会誌, Vol. 96, No. 891, pp. 124-128, 1993.

特許など

• 帯川利之, 篠塚淳, 釜田　康裕. 最少量潤滑切削工具、最少量潤滑切削装置および最少量潤滑切削方法. 特許. 公開. 国立大学法人東京工業大学. 2004/11/10. 特願2004-325854. 2006/06/01. 特開2006-136953. 2006.

学位論文

• 硫黄快削鋼におけるMnS粒子の快削作用に関する研究,  本文,  Doctor of Engineering,  東京工業大学,  1980/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]