@book{CTT100801887,
  author = {齋藤義夫 and 山崎 一男},
  title = {株式会社光陽社},
  publisher = {砥粒加工学会},
  year = 2013,
}

@book{CTT100801997,
  author = {齋藤義夫 and 福島 洋一},
  title = {企業トップに聞く!},
  publisher = {砥粒加工学会},
  year = 2013,
}

@book{CTT100802206,
  author = {齋藤義夫 and 黒田 浩史},
  title = {企業トップに聞く!},
  publisher = {砥粒加工学会},
  year = 2013,
}

@book{CTT100402828,
  author = {斎藤義夫分担 and 日本機械学会編},
  title = {機械工学便覧 デザイン編 β7生産システム工学},
  publisher = {丸善株式会社},
  year = 2005,
}

@book{CTT100427434,
  author = {齋藤義夫},
  title = {精密工作便覧},
  publisher = {コロナ社},
  year = 1992,
}

@book{CTT100427435,
  author = {齋藤義夫},
  title = {やさしい生産加工技術},
  publisher = {工業調査会},
  year = 1992,
}

@book{CTT100427433,
  author = {齋藤義夫},
  title = {潤滑ハンドブック},
  publisher = {養賢堂},
  year = 1987,
}

@article{CTT100700214,
  author = {Muslimin and Jiang ZHU and Hayato YOSHIOKA and Tomohisa TANAKA and Yoshio SAITO},
  title = {Study on plane feature extraction in registration of laser scanning data sets for reverse engineering},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100699107,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the mechanism of laser forming to the thin stainless-steel wire},
  journal = {International Journal of Nanomanufacturing},
  year = 2015,
}

@article{CTT100696389,
  author = {Jiang ZHU and Masato KATO and Tomohisa TANAKA and Hayato YOSHIOKA and Yoshio SAITO},
  title = {Graph based automatic process planning system for multi-tasking machine},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100684117,
  author = {Yasunori SAKAI and Tomohisa TANAKA and Hayato YOSHIOKA and Jiang ZHU and Masaomi TSUTSUMI and Yoshio SAITO},
  title = {Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100677370,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100677369,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100664709,
  author = {Yuanrui Zhang and Shigenobu Nagase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Positioning calibration of a parallel mechanism worktable with 6-DOF},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100664707,
  author = {JIANG Zhu and AKIMITSU Hozumi and TOMOHISA Tanaka and Yoshio Saito},
  title = {High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100801602,
  author = {Ahmad, N. and Tanaka, T. and YOSHIO SAITO},
  title = {Machining parameter optimisation by genetic algorithm and artificial neural network},
  journal = {International Journal of Data Analysis Techniques and Strategies},
  year = 2014,
}

@article{CTT100645620,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable},
  journal = {Key Egineering Materials (Emerging Technology in Precision Engineering XIV)},
  year = 2012,
}

@article{CTT100641001,
  author = {Kohei Ogura and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100641002,
  author = {Shunsuke Oike and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Robust Production Scheduling Using Autonomous Distributed Systems},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100634441,
  author = {Xiaoyi Wang and Jing Chen and Jiang Zhu and Yoshio Saito and Tomohisa Tanaka},
  title = {Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100630821,
  author = {Jiang Zhu and Tomohisa TANAKA and Yoshio SAITO and Ryuta TANABE and Masaaki TAKENAKA and Toru FUKAMI},
  title = {On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2011,
}

@article{CTT100626163,
  author = {Jiang Zhu and Yuichi Takekuma and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction},
  journal = {Advanced Materials Research},
  year = 2011,
}

@article{CTT100620032,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito and Lining Sun},
  title = {Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation},
  journal = {International Journal of Design Engineering},
  year = 2011,
}

@article{CTT100611694,
  author = {Tomohisa Tanaka and Ryo Suzuki and Jiang Zhu and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2010,
}

@article{CTT100609833,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609835,
  author = {TOMOHISA TANAKA and Masahiro Komori and JIANG ZHU and YOSHIO SAITO},
  title = {Development of Flexible Worktable for Endmilling Based on Parallel Mechanism},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609834,
  author = {JIANG ZHU and Keisuke Nomura and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Planning Assist System for Freeform Surface Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100565220,
  author = {JIANG ZHU and Ryo Suzuki and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2008,
}

@article{CTT100556173,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2007,
}

@article{CTT100556172,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2007,
}

@article{CTT100523443,
  author = {田中智久 and 齋藤義夫},
  title = {発泡スチロールの熱線加工メカニズム(熱線停止時の加工特性)},
  journal = {日本機械学会論文集（C)},
  year = 2006,
}

@article{CTT100523488,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-Axis Robot Based Rough Cutting System for Surface Sculpturing},
  journal = {Proc. The 11th International Conference on Precision Engineering (ICPE)},
  year = 2006,
}

@article{CTT100523499,
  author = {Nafis Ahmad and Ryo Wakabayashi and Tomohisa Tanaka and Yoshio Saito},
  title = {Experimental Analysis and Optimization of Cutting Parameters for End Milling Aluminium Alloy},
  journal = {Proc. The 11th International Conference on Precision Engineering (ICPE)},
  year = 2006,
}

@article{CTT100523459,
  author = {田中智久 and 飯田喜洋 and 齋藤義夫},
  title = {環境対応型工作機械用MQLオイルミストセンサシステムの試作},
  journal = {日本機械学会論文集(C)},
  year = 2006,
}

@article{CTT100523480,
  author = {Nafis AHMAD and Tomohisa TANAKA and Yoshio SAITO},
  title = {Cutting Parameters Optimization and Constraints Investigation for Turning Process by GA with Self-Organizing Adaptive Penalty Strategy},
  journal = {JSME International Journal Series C},
  year = 2006,
}

@article{CTT100403716,
  author = {J.Zhu and T.Tanaka and Y.Saito},
  title = {3D Mesh Simplification for Freeform Surface},
  journal = {Tehran International Congress on Manufacturing Engineering (TICME2005)},
  year = 2005,
}

@article{CTT100404087,
  author = {Nafis Ahmad and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimization of Cutting Parameters for End Milling Operation by SOAP based Genetic Algorithm},
  journal = {International Conference on Mechanical Engineering},
  year = 2005,
}

@article{CTT100541447,
  author = {Nafis Ahmad and Tomohisa Tanaka and Yoshio Saito},
  title = {Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy},
  journal = {Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2005,
}

@article{CTT100402836,
  author = {Javad AKBARI and Shinzo ENOMOTO and Kazuhiko KATO and Yoshiyuki YAKABE and Tomohisa TANAKA and Yoshio SAITO},
  title = {An Experimental Investigation on EDM Process Using a Desktop Machine Tool},
  journal = {Proceedings of ICoPE2003/2004},
  year = 2004,
}

@article{CTT100402838,
  author = {YOSHIO SAITO},
  title = {Using Ultrasound for Measuring Grasping Force of Robot Soft Finger},
  journal = {JSME International Journal, Series C},
  year = 2004,
}

@article{CTT100494149,
  author = {J. Akbari and M.Imamura and T. Tanaka and Y. Saito},
  title = {Ultrasonic Tactile Sensor for Robot Gripper},
  journal = {International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2003,
}

@article{CTT100494146,
  author = {Takashi Sugie and Tomohisa Tanaka and Javad Akbari and Yoshio Saito},
  title = {An Approximation of Free-Formed Surface for NC Machining},
  journal = {International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2003,
}

@article{CTT100477959,
  author = {Javad Akbari and Eiji Utada and Tomohisa Tanaka and Yoshio Saito},
  title = {Sensor Integrated Locator for Intelligent Fixture},
  journal = {Proceeding of 6th International Conference on Mechatronics Technology},
  year = 2002,
}

@article{CTT100478061,
  author = {Javad Akbari and Keigo Oyamada and Yoshio Saito},
  title = {LCA of Machine Tools with Regard to their Secondary Effects on Quality of Machined Parts},
  journal = {Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing},
  year = 2001,
}

@article{CTT100447836,
  author = {稲場千佳郎 and 小田切拓哉 and 斎藤義夫 and 伊東 誼},
  title = {システムマシン用二層主軸の熱変形抑制},
  journal = {日本機械学会論文集(C編)},
  year = 2000,
}

@article{CTT100447834,
  author = {稲場千佳郎 and 山中 暁 and 斎藤義夫 and 伊東 誼},
  title = {空気浮上支持された球体の回転運動計測},
  journal = {日本機械学会論文集(C編)},
  year = 2000,
}

@article{CTT100447835,
  author = {稲場千佳郎 and 朝永 祐 and 伊東 誼 and 斎藤義夫},
  title = {超音波計測に基づく軸受部接触圧力の推定},
  journal = {日本機械学会論文集(C編)},
  year = 2000,
}

@article{CTT100427431,
  author = {齋藤義夫},
  title = {環境を考慮した工作機械技術},
  journal = {砥粒加工学会誌},
  year = 1999,
}

@article{CTT100427432,
  author = {沈 英謀 and 津村幸治 and 吉田嘉太郎 and 斎藤義夫},
  title = {陰影情報およびB-Spline曲面近似による立体形状の認識（第３報、制御点の配置と認識効率）},
  journal = {日本機械学会論文集（C編）},
  year = 1999,
}

@article{CTT100418192,
  author = {稲場千佳郎 and 伊東 誼 and 斎藤義夫 and 野尻 恭},
  title = {浮上回転方式による球体の塗装方法の一提案},
  journal = {日本機械学会論文集(C編)},
  year = 1998,
}

@article{CTT100418191,
  author = {沈 英謀 and 藤村 誠 and 津村幸治 and 斎藤義夫 and 吉田嘉太郎},
  title = {陰影情報およびB-Spline曲面近似による立体形状の認識},
  journal = {日本機械学会論文集},
  year = 1998,
}

@article{CTT100418190,
  author = {津村幸治 and 村田修一 and 齋藤義夫},
  title = {Gradient Flowによるシステム空間の解析},
  journal = {計測自動制御学会論文集},
  year = 1998,
}

@article{CTT100427430,
  author = {津村幸治 and 齋藤義夫},
  title = {有限時間整定による連続時間系の多目的制御},
  journal = {システム制御情報学会論文集},
  year = 1998,
}

@article{CTT100427429,
  author = {沈 英謀 and 藤村 誠 and 津村幸治 and 斎藤義夫 and 吉田嘉太郎},
  title = {陰影情報およびB-Spline曲面近似による立体形状の認識},
  journal = {日本機械学会論文集（C編）},
  year = 1998,
}

@article{CTT100427427,
  author = {樋口静一 and 戸塚貴之 and 斎藤義夫},
  title = {コーテッドアブレーシブ型研磨工具における研削痕軌跡の形成過程},
  journal = {砥粒加工学会誌},
  year = 1998,
}

@article{CTT100427428,
  author = {津村幸治 and 伊藤 晃 and 齋藤義夫},
  title = {同定誤差とシステムの不確かさに関して},
  journal = {計測自動制御学会論文集},
  year = 1998,
}

@article{CTT100427426,
  author = {津村幸治 and 森田 洋 and 齋藤義夫},
  title = {連続時間H∞制御系の有限時間整定},
  journal = {計測自動制御学会論文集},
  year = 1998,
}

@inproceedings{CTT100698665,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100698664,
  author = {Tomohisa Tanaka and Syo Harada and Jiang Zhu and Hayato Yoshioka and Yoshio Saito},
  title = {Fundamental Study for Control of Hue and Brightness in the Laser Coloring},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100696387,
  author = {Jiang Zhu and Masato Kato and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine},
  booktitle = {Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)},
  year = 2015,
}

@inproceedings{CTT100696388,
  author = {朱 疆 and 齋藤 義夫},
  title = {樹脂材料の加工特性及び積層造型と切削加工によるハイブリッド造型法に関する研究},
  booktitle = {日本設計工学会2015年度春季大会研究発表講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684081,
  author = {原田将 and 朱 疆 and 田中智久 and 吉岡勇人 and 齋藤義夫},
  title = {チタンへのレーザ照射による構造色に関する研究－色再現性の向上と広色空間の実現},
  booktitle = {日本機械学会生産システム部門研究発表講演会2015講演論文集},
  year = 2015,
}

@inproceedings{CTT100684116,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684114,
  author = {Saurabh Bhide and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684112,
  author = {原幹也 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {切削条件がPTFEの加工面精度に与える影響に関する研究},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684105,
  author = {加藤雅人 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {グラフを用いた複合加工機のための自動加工工程設計システム},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684102,
  author = {長瀬重信 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {分割領域毎の最適加工パスによる自由曲面加工の効率化},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684100,
  author = {酒井康徳 and 吉岡勇人 and 朱疆 and 齋藤義夫 and 田中智久},
  title = {転がり案内における非線形摩擦に起因する振動の複素ばねモデルを用いた解析},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684096,
  author = {高卉葳 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {自律分散システムを用いた柔軟な生産スケジューリングシステムの構築},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684086,
  author = {yuanrui zhang and JIANG ZHU and Hayato Yoshioka and YOSHIO SAITO and TOMOHISA TANAKA},
  title = {Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100684089,
  author = {Yasunori Sakai and JIANG ZHU and TOMOHISA TANAKA and Hayato Yoshioka and YOSHIO SAITO},
  title = {Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100684265,
  author = {Yasunori SAKAI and Jiang Zhu and Tomohisa Tanaka and Hayato Yoshioka and Yoshio Saito},
  title = {Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway},
  booktitle = {Proceedings of MECHATRONICS 2014},
  year = 2014,
}

@inproceedings{CTT100678675,
  author = {酒井康徳 and 朱 疆 and 田中智久 and 吉岡勇人 and 齋藤義夫},
  title = {転がり出し領域における摩擦が転がり案内の送り方向動特性に及ぼす影響},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100677367,
  author = {原 幹也 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {切削条件が PTFE エンドミル加工の切削抵抗に及ぼす影響},
  booktitle = {２０１４年度砥粒加工学会学術講演会論文集},
  year = 2014,
}

@inproceedings{CTT100668349,
  author = {前田直輝 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {レーザを用いた金属細線の積層による3次元形状の創成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100668345,
  author = {小池勇樹 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668346,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction Using Segmentation},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668347,
  author = {酒井康徳 and 花岡俊樹 and 朱疆 and 齋藤義夫 and 田中智久},
  title = {加振力振幅が直動転がり案内の動特性に及ぼす影響},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668348,
  author = {大石真也 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {ステンレス線材のレーザフォーミングメカニズムに関する研究},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100680828,
  author = {岩附信行 and 齋藤義夫 and 齊藤卓志},
  title = {機械設計教育と連動した創造性育成科目（東京工業大学工学部機械知能システム学科「機械知能システム創造」について）},
  booktitle = {Designシンポジウム2014USB講演論文集},
  year = 2014,
}

@inproceedings{CTT100664708,
  author = {Xu Zhou and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Titanium Coloring Mechanism through Laser Irradiation},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664710,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the Laser Forming of Thin Stainless-steel Wire},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664706,
  author = {Jiang ZHU and Saori MUTO and Tomohisa Tanaka and Yoshio SAITO},
  title = {Development of Automatic Machining Process Deciding System Based on 3D-Model},
  booktitle = {Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2013,
}

@inproceedings{CTT100661084,
  author = {原幹也 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {切削条件がPTFEの加工面性状に与える影響に関する研究},
  booktitle = {ABTEC2013砥粒加工学会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100651334,
  author = {長谷川将臣 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによる多軸加工機の粗加工の効率化},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100651345,
  author = {穂積昭充 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {NURBS曲面の分割による高効率加工パスの生成},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100651354,
  author = {武藤沙織 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元形状モデルからの加工工程自動決定システムの開発},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100651298,
  author = {Osama Abdelaal and Jiang Zhu and Tomohisa Tanaka and Saied Darwish and Yoshio Saito},
  title = {Additive Manufacturing of Custom-made Hip Implants},
  booktitle = {Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013},
  year = 2013,
}

@inproceedings{CTT100651290,
  author = {大石真也 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {ステンレス線材へのレーザフォーミングの適用},
  booktitle = {日本機械学会生産システム部門研究発表講演会2013講演論文集},
  year = 2013,
}

@inproceedings{CTT100645590,
  author = {Xu Zhou and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the Structural Color Appearance of Titanium by Laser Irradiation},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645589,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645066,
  author = {朱疆 and 後藤純平 and 田中智久 and 齋藤義夫},
  title = {放電加工を利用した積層造型法のツールパス生成},
  booktitle = {第9回生産加工・工作機械部門講演会論文集},
  year = 2012,
}

@inproceedings{CTT100645065,
  author = {周煦 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {レーザ照射によるチタン酸化被膜の発色メカニズムに関する研究},
  booktitle = {第9回生産加工・工作機械部門講演会論文集},
  year = 2012,
}

@inproceedings{CTT100634443,
  author = {塚崎 遥 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザを用いた金属樹脂混成積層造形に関する研究},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634445,
  author = {張遠瑞 and 武 建涛 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {6-DOFパラレルメカニズムのワークテーブルの誤差要因解析},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634444,
  author = {関口 翔太 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸冗長ロボットシステムを用いた加工システムの構築},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634442,
  author = {飯塚祐哉 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザフォーミングによる細線構造物の造形に関する研究},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634447,
  author = {長谷川将臣 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによるターニングセンタの粗加工工程の検証},
  booktitle = {日本機械学会生産システム部門研究発表講演会2012講演論文集},
  year = 2012,
}

@inproceedings{CTT100645619,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100631593,
  author = {Jiang Zhu and Yusuke Narabu and Tomohisa Tanaka and Yoshio Saito},
  title = {Manufacturing Feature Extraction System of 3D-Model for Process Planning},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100631596,
  author = {Takahiro Kubo and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100628709,
  author = {関口 翔太 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸冗長ロボットシステムによる三次元加工},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628711,
  author = {大池 瞬介 and 田中 智久 and 朱 疆 and 齋藤 義夫},
  title = {自律分散システムを応用した堅牢な生産スケジューリングシステム},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628707,
  author = {木下 真也 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {チタンへのレーザ照射による構造色の発見に関する研究},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628706,
  author = {西尾 拓 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザーを用いた異種材料混成造形物創成のための基礎的研究},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628705,
  author = {穂積 昭充 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {6軸制御ワイヤ放電加工機用加工支援システムの作成},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628704,
  author = {塚崎 遥 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {5軸制御によるサポートフリーRP装置の開発},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628703,
  author = {武藤沙織 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {RP装置による三次元形状の創成と評価},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628702,
  author = {飯塚裕哉 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザフォーミングによる細線構造物造形},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100631779,
  author = {Asim Al-Sofi and Yoshio Saito and Tomohisa Tanaka and Jiang Zhu},
  title = {Generating the Measurement Points Based on Finishing NC Data},
  booktitle = {Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)},
  year = 2011,
}

@inproceedings{CTT100619339,
  author = {小倉康平 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {PMMAの三次元形状加工に向けたエキシマレーザアブレーションの加工特性},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619341,
  author = {武隈裕一 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元モデルの比較による形状評価システムの構築},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619340,
  author = {奈良部優介 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元形状モデルからの加工法自動決定システムの開発},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619713,
  author = {大池瞬介 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {自律分散システムを応用した堅牢な生産スケジューリングシステム},
  booktitle = {日本機械学会生産システム部門研究発表講演会2011講演論文集},
  year = 2011,
}

@inproceedings{CTT100619395,
  author = {Jiang Zhu and Akira Yanagisawa and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT)},
  booktitle = {Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011},
  year = 2011,
}

@inproceedings{CTT100619342,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {粗さ接触面における接触部直接観察による高荷重摩耗特性評価},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100801788,
  author = {Ahmad, N. and Tanaka, T. and YOSHIO SAITO},
  title = {Optimization of multipass turning parameters by genetic algorithm},
  booktitle = {Advanced Materials Research},
  year = 2011,
}

@inproceedings{CTT100615871,
  author = {Jiang Zhu and Keisuke Nomura and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh},
  booktitle = {Proceeding of the 14th International Conference on Mechatronics Technology},
  year = 2010,
}

@inproceedings{CTT100617994,
  author = {新宅健吾 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {既加工部の形状測定データを利用したワーク付け替え時における精度維持},
  booktitle = {日本機械学会 第八回生産加工・工作機械部門講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100614418,
  author = {Shota Sekiguchi and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Freeform Surface Machining and Measurement by 8-axis Robot System},
  booktitle = {Proceedings of the 14th International Machine Tool Egineers' Conference},
  year = 2010,
}

@inproceedings{CTT100612497,
  author = {西山浩司 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {2.5軸輪郭加工に適した高効率加工パスの生成},
  booktitle = {2010年度精密工学会秋季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100611645,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {高荷重域における粗さ接触表面下の塑性変形状態判別},
  booktitle = {ABTEC2010砥粒加工学会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601111,
  author = {野村佳佑 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによるターニングセンタの高効率化加工},
  booktitle = {2010年度精密工学会春季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601112,
  author = {小森正裕 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {6軸パラレルメカニズムを用いたワークテーブルの開発},
  booktitle = {2010年度精密工学会春季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100600908,
  author = {奈良部優介 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {加工のためのCADモデル特徴領域の自動抽出},
  booktitle = {日本機械学会北陸信越支部第47期総会・講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100593349,
  author = {Jiang Zhu and Ryota Tanabe and Tomohisa Tanaka and Yoshio Saito},
  title = {Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593350,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593348,
  author = {Xiaoyi Wang and Quanxian Wang and Yoshio Saito and Jiang Zhu and Tomohisa Tanaka},
  title = {Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593347,
  author = {Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100592664,
  author = {Masahiro Komori and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100592662,
  author = {Yusuke Narabu and Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100589860,
  author = {武隈裕一 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {セラミックスのフルモールド成形法に関する研究},
  booktitle = {2009年度精密工学会秋季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589411,
  author = {小森正裕 and 齋藤 義夫 and 田中 智久 and 朱 疆},
  title = {工作機械に適した6軸パラレルメカニズムを用いたワークテーブルの開発},
  booktitle = {2009年度砥粒加工学会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589858,
  author = {Xiaoyi Wang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Assembly Model Capable of Reorganizing Assembly Structure},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009},
  year = 2009,
}

@inproceedings{CTT100589859,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {粗さ面の真実接触部判定の高精度化に関する研究},
  booktitle = {2009年度精密工学会秋季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589861,
  author = {鈴木純 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {作業区間をシェルに内包する小型工作機械},
  booktitle = {日本機械学会2009年度年次大会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589862,
  author = {奈良部優介 and ﾊﾗﾉﾄﾞｼﾞｮﾝｼ and 朱疆 and 田中智久 and 齋藤義夫},
  title = {自由曲面ミル加工のための形状に基づくパス選択},
  booktitle = {日本機械学会2009年度年次大会講演論文集},
  year = 2009,
}

@inproceedings{CTT100592000,
  author = {Tomohisa TANAKA and Bruno LEBAN and Takahiro KUBO and Yoshio SAITO and Massimiliano PAU and Hua CHEN and Makoto ISHIDA},
  title = {Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces},
  booktitle = {Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems},
  year = 2009,
}

@inproceedings{CTT100571835,
  author = {鈴木 僚 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {パルス数制御による高分子材料の自由曲面レーザアブレーション加工},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571834,
  author = {田辺龍太 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールによる３次元形状の加工と計測},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571833,
  author = {棚瀬雅貴 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる非接触三次元形状計測パスの生成方法},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571435,
  author = {馮飛 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸加工システムによる３Dモデルの加工に適用するツールパスの生成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2009講演論文集},
  year = 2009,
}

@inproceedings{CTT100566328,
  author = {Ryuta Tanabe and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement and machining using polar coordiante desktop machine tool},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566327,
  author = {Masataka Tanase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Freeform surface sculpturing and measurement system based on 8-axis robot system},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566627,
  author = {朱 疆 and ハラノド ジョンシ and 田中 智久 and 齋藤 義夫},
  title = {CG画像簡略化技術を利用した自由曲面特徴領域の抽出に関する研究},
  booktitle = {日本機械学会 第七回生産加工・工作機械部門講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565455,
  author = {田辺龍太 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた加工},
  booktitle = {２００８年度精密工学会秋季大会学術講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565219,
  author = {JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO and Lining Sun},
  title = {Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100592810,
  author = {Shunsuke Oike and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Flexible Manufacturing Scheduling},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100565454,
  author = {棚瀬雅貴 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる非接触三次元形状計測},
  booktitle = {２００８年度精密工学会秋季大会学術講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565340,
  author = {野村佳佑 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸加工システムの高機能化に関する研究},
  booktitle = {日本機械学会2008年度年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100562126,
  author = {朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {自由曲面加工に適した粗加工モデルの生成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2008講演論文集},
  year = 2008,
}

@inproceedings{CTT100562127,
  author = {ハラノド ジョンシ and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {自由曲面加工に適した工具パスの生成方法},
  booktitle = {日本機械学会生産システム部門研究発表講演会2008講演論文集},
  year = 2008,
}

@inproceedings{CTT100562699,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100556212,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis Surface Sculpturing System by Heated Cutting Tools},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562700,
  author = {Ryo Tanabe and Yoshio Saito and Tomohisa Tanaka},
  title = {Measurement and Machining by using Polar Coordinate Desktop Machine Tool},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562695,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {一体構造による工作機械の小型軽量化に関する研究},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562698,
  author = {本田兼基 and 齋藤義夫 and 田中智久},
  title = {高周波誘導加熱によるCFRPの成形過程},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562696,
  author = {波田純一 and 田中智久 and 齋藤義夫},
  title = {複合加工に適した工程設計システム},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100610616,
  author = {Guanglei Liu and Tomohisa Tanaka and Yoshio Saito},
  title = {A Study on Miniature Automatic Tool Changer for Desktop Machine Tool},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2007,
}

@inproceedings{CTT100556211,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  booktitle = {Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21},
  year = 2007,
}

@inproceedings{CTT100544167,
  author = {田中智久 and Leban Bruno and 齋藤義夫 and 陳樺 and 石田誠},
  title = {球状凸面と平面の接触における全反射接触部観察の特性評価},
  booktitle = {トライボロジー会議予稿集 佐賀 2007-9},
  year = 2007,
}

@inproceedings{CTT100544164,
  author = {田中智久 and 木村雄一郎 and 齋藤義夫 and 汲田孝行 and 駒井保宏},
  title = {マシニングセンタ用ホーニングツールの実用化に関する研究},
  booktitle = {2007年度砥粒加工学会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100544175,
  author = {波田純一 and 田中智久 and 齋藤義夫},
  title = {複合加工に適した工程設計システム},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544174,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {一体構造による工作機械の小型軽量化に関する研究},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544173,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on constant scallop height tool path generation for freeform surface machining},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544172,
  author = {小森正裕 and 齋藤義夫 and 田中智久},
  title = {直動型パラレルメカニズムの機構特性},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544165,
  author = {田中智久 and 高下法子 and Leban Bruno and 齋藤義夫},
  title = {すべり接触する突起の真実接触部挙動観察},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100556210,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {A Surface Sculpturing System Based on 8-Axis Robot},
  booktitle = {Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007},
  year = 2007,
}

@inproceedings{CTT100544171,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {エンドミル加工におけるスピンドルスルーMQLの効果},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100535250,
  author = {竹中正彬 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた計測},
  booktitle = {日本機械学会第6回生産加工･工作機械部門講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100571836,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis robot integrated surface sculpturing system},
  booktitle = {New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference},
  year = 2006,
}

@inproceedings{CTT100562123,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough machining process and its simulation for robot integraged surface sculpturing system},
  booktitle = {Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems},
  year = 2006,
}

@inproceedings{CTT100523511,
  author = {Tomohisa Tanaka and Masahiro Ashizuka and Yoshio Saito and Tsunamitsu Nakahara},
  title = {Study on The Contact Characteristics of Truncated Surfaces},
  booktitle = {Proc. The 3rd Asia International Conference on Tribology},
  year = 2006,
}

@inproceedings{CTT100556205,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-axis robot based rough cutting system for surface sculpturing},
  booktitle = {Towards Synthesis of Micro-/Nano-systems},
  year = 2006,
}

@inproceedings{CTT100535245,
  author = {下河辺学 and 田中智久 and 齋藤義夫},
  title = {CAMシステムを利用したポケット形状加工の体系化},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100535248,
  author = {本田兼基 and 田中智久 and 齋藤義夫},
  title = {MQL加工用ミストセンサの開発},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100541453,
  author = {芦塚正博 and 田中智久 and 斎藤義夫},
  title = {トランケーションが及ぼす接触特性への影響(第2報)},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100535244,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる形状計測と精度評価},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100535247,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {エキシマレーザ加工による高分子材料の3次元形状創成},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100556203,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D mesh simplification for freeform surfacing},
  booktitle = {},
  year = 2005,
}

@inproceedings{CTT100541452,
  author = {高下法子 and 田中智久 and 斎藤義夫},
  title = {弾性変形拡張方式によるホーニングツールの開発},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100562128,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A new mesh simplification algorithm for the application of surface sculpturing},
  booktitle = {Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics},
  year = 2005,
}

@inproceedings{CTT100541451,
  author = {菅谷健二郎 and 田中智久 and 斎藤義夫},
  title = {高分子材料へのエキシマレーザアブレーション加工に関する研究},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100541449,
  author = {原 雄太 and 田中智久 and 斎藤義夫},
  title = {工作機械の消費電力評価方法の構築},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100541450,
  author = {深見 徹 and 田中智久 and 斎藤義夫},
  title = {極座標型デスクトップマシンツールを用いた加工と計測},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100541448,
  author = {杉恵貴史 and 田中智久 and 斎藤義夫},
  title = {8軸制御曲面加工システムの構築とそのプログラミング},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100541454,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {ＭＱＬ加工用ミストセンサの開発},
  booktitle = {2004年度精密工学会秋季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100402839,
  author = {歌田英司 and 菅谷健二郎 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {発泡スチロールのエキシマレーザ加工に関する研究},
  booktitle = {精密工学会},
  year = 2004,
}

@inproceedings{CTT100402840,
  author = {山田維祐 and 大野竜太 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {デスクトップ型工作機械用オートアライメント機構の開発},
  booktitle = {精密工学会},
  year = 2004,
}

@inproceedings{CTT100402842,
  author = {高本尚志 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {コンポジットめっきの超精密切削に関する研究},
  booktitle = {精密工学会},
  year = 2004,
}

@inproceedings{CTT100402841,
  author = {福永悦史 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {超小型工作機械用高速主軸の開発とMQL加工への適用},
  booktitle = {精密工学会},
  year = 2004,
}

@inproceedings{CTT100388684,
  author = {齋藤義夫},
  title = {モノづくりから創成教育へ},
  booktitle = {日本機械学会2004年度年次大会講演資料集(8)},
  year = 2004,
}

@inproceedings{CTT100495674,
  author = {深見徹 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {弾性変形拡張方式を利用したホーニングツールの開発},
  booktitle = {2003年度精密工学会秋季大会学術講演会講演論文集},
  year = 2003,
}

@inproceedings{CTT100477963,
  author = {坂谷内篤 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {ロボットの把持動作に関する学習制御},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100477961,
  author = {歌田英司 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {超音波接触判定センサを持つロケータの開発},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495706,
  author = {山中暁 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {環境対応型工作機械用ミストセンサの開発},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495705,
  author = {前田陽介 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495704,
  author = {杉田芳史 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {自由曲面形状の創成と計測に関する研究},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495693,
  author = {矢ヶ部善幸 and 山田洋維祐 and 田中智久 and アキバリ ジャワド and 斎藤義夫},
  title = {PC制御デスクトップマシンによる放電加工機},
  booktitle = {日本機械学会第4回生産加工･工作機械部門講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495708,
  author = {小山田圭吾 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械の環境への2次的影響},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495709,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495710,
  author = {黄 士元 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究},
  booktitle = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495711,
  author = {今村光広 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {超音波センサ組み込みソフトフィンガによる把持状態の検出},
  booktitle = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495713,
  author = {芦塚正博 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―},
  booktitle = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495730,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―},
  booktitle = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100495731,
  author = {吉柳一郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {多軸ロボットによる自由曲面生成アルゴリズムの構築},
  booktitle = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@inproceedings{CTT100460314,
  author = {小野田達志 and 斎藤義夫},
  title = {発泡スチロールの熱線による３Ｄラピッドプロトタイピング},
  booktitle = {第２０回ラピッド・プロトタイピング　シンポジウム},
  year = 2001,
}

@misc{CTT100801860,
  author = {齋藤義夫},
  title = {工作機械の環境対応に関する規格},
  year = 2012,
}

@misc{CTT100402837,
  author = {齋藤義夫 and 齊藤卓志 and 原 精一郎},
  title = {モノづくりと創造性教育 (機械知能システム創造)},
  year = 2005,
}

@misc{CTT100460315,
  author = {綱清一郎 and 斎藤義夫},
  title = {超音波を用いた軸受部接触圧力の測定},
  year = 2001,
}

@misc{CTT100594771,
  author = {齋藤義夫},
  title = {被削材周辺条件と研削加工精度に関する研究},
  year = 1984,
}

@misc{CTT100595041,
  author = {YOSHIO SAITO},
  title = {研削油剤の潤滑効果に関する研究},
  year = 1975,
}



@phdthesis{CTT100594771,
  author = {齋藤義夫},
  title = {被削材周辺条件と研削加工精度に関する研究},
  school = {東京工業大学},
  year = 1984,
}

@mastersthesis{CTT100595041,
  author = {YOSHIO SAITO},
  title = {研削油剤の潤滑効果に関する研究},
  school = {東京工業大学},
  year = 1975,
}