論文

• N. Yoneyama, S. Kumai, A. Sato, M. Komatsu, M. Kiritani. Effects of Solidification Structure on Short Fatigue Crack Growth in Al- Al-7%Si-0.4%Mg Alloy Castings, Materials Science and Engineering, Vol. 157, 109-126, 2003.
• S. Muraishi, S. Kumai, A. Sato. Stress-oriented Nucleation of Ω-phase Plates In an Al-Cu-Mg-Ag Alloy, Philosophical Magazine A 82[2], 415-428(2002), Vol. 82, No. 2, pp. 415-420, 2002.
• N. Yoneyama, S. Kumai, A. Sato, M. Komatsu, M. Kiritani. Microstructures in an Fe Based Shape Memory Alloy and Al Based Dual Phase Crystals after High Speed Deformation, Radiation Effects and Defects in Solids, Vol. 157, pp. 109-126, 2002.
• T. Murakumo, K. Haruta, N. Yoneyama, A. Sato. In-situ Observation of Superdislocation Motion in Pre-trained Ni┣D23┫D2Ge Single Crystals, Journal of Microscopy, Vol. 203, No. 1, pp. 57-67, 2001.
• AKIKAZU SATO. Origin of Improved Ductility in Semi-Liquid Die-Cast Al-7%Si-0.4 %Mg Alloys, Mater. Trans. JIM, Vol. 42, No. 2, pp. 342-349, 2001.
• T. Murakumo, S. Ueta, A. Miyahara, T. Hannuki, A. Sato. Irradiation Induced Defects in Deformed Ni┣D23┫D2Ge and Ni┣D23┫D2Al Single Crystals, Philosophical Magazine A, Vol. 80, No. 4, pp. 893-918, 2000.
• AKIKAZU SATO. Irradiation Induced Defects in Deformed Ni3Ge and Ni3Al Single Crystals, Philosophical Magazine, Vol. 80, No. 4, pp. 893-981, 2000.
• T. Masuya, N. Yoneyama, S. Kumai, A. Sato. Strengthening of Fe-Mn-Si Based Shape Memory Alloys by Grain Size Refinement, Materials Science Forum, Vol. 327-328, pp. 223-226, 2000.
• AKIKAZU SATO. Grain Size Effect on the Microstructure of Deformed Fe-Mn-Si Based Shape Memory Alloys, Materials Science Forum, Vol. 327-328, pp. 267-270, 2000.
• K. Yamashita, I. Fujimoto, T. Murakumo, S. Kumai, A. Sato. Observation of Gride Dislocations in D020 Ordered Al3Ni, Philosophical Magazine, Vol. 80, No. 1, pp. 219-235, 2000.
• t. Murakumo, S. Kumai, A. Sato. Effects of Mechanical Constraint on the Strength of Ni┣D23┫D2Ge Single Crystals, Mater. Trans. JIM, Vol. 41, No. 2, pp. 279-286, 2000.
• K. Yamashita, C. Watanabe, S. Kumai, M. Kato, A. Sato, Y. Watanabe. Cyclic Deformation and Decelopement of Dislocation Structures in a Centrifugally Cast Al-Al3Ti of Functionally Graded Material, Mater. Trans. JIM, Vol. 41, No. 10, pp. 1322-1328, 2000.
• AKIKAZU SATO. Effects of Extrusion Temperature on Creep Properties of Spray-Formed and Hot-Extruded Al-8 mass% Fe Alloys, Mater. Trans. JIM, Vol. 41, No. 4, pp. 527-534, 2000.
• A. SATO, T. MASUYA, M. MORISHITA, S. KUMAI, A. INOUE. Strengthening of Fe-Mn-Si Based Shape Memory Alloys by Grain Size Refinement, Materials Science Forum Vols. 327-328, Poc. of Int. Conf. on Shape Memory Materials, Kanazawa, Japan, 223-226, 1999.
• AKIKAZU SATO. Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack Growth in Cast and HIPed AC4CH Alloys, Mater. Trans. JIM, Vol. 40, No. 7, pp. 685-691, 1999.
• AKIKAZU SATO. Dislocation Structures and Dislocation Sources in Deformed Metals, Radiation Effects & Defects in Solids, 148, pp. 345-360, 1999.
• 佐藤彰一. Fe-Mn-Si系形状記憶合金におけるショックレイ部分転位の増殖, まてりあ, Vol. ３７, No. ５, pp. ３８５, 1998.
• AKIKAZU SATO. Plastic Deformation of D022 Ordered Al3Ti in a Centrifugally Cast Al-Al3Ti Composite, Mater. Trans. JIM, Vol. 39, No. 8, pp. 824-833, 1998.
• AKIKAZU SATO. Formation of Antiphase-boundary Tubes and Magnetization in Fe-35at%Al by Plastic Deformation at 77 K, Philosophical Magazine A, Vol. 78, No. 2, pp. 285-303, 1998.
• AKIKAZU SATO. Nucleation-and-growth Kinetics of Small Crystals in Amorphous Al┣D288┫D2Ce┣D22┫D2 Nig Fe, Philosophical Magazine A, Vol. 76, No. 2, pp. 387-412, 1997.
• AKIKAZU SATO. Cube Slips and Anomalous Strengthening in Ni3Ge Single Crystals, Philosophical Magazine, Vol. 75, No. 2, pp. 563-585, 1997.
• AKIKAZU SATO. Rapid Work Hardring Caused by Cube Cross Slip in Ni┣D23┫D2Al Single Crystals, Philosophical Magazine A, Vol. 73, No. 2, pp. 353-364, 1996.
• 佐藤彰一. Fe16N2析出物の磁気異方性と外部磁場による配向 , 機能材料, Vol. １５, No. ２, pp. ２０－３１, 1995.
• AKIKAZU SATO. Crystalliozation of Al3Ti in Al-5wt%Ti by Centrifugal Casting and the Strengthening, Proc. Int. Symp. on Advanced Materials and Technology for the 21st Century, The 117th Meeting, JIM, pp. 1307, 1995.
• AKIKAZU SATO. Dislocation Structure and Strengthening in Ni3Ge Single Crystals, Proc. Int. Symp. on Advanced Materials and Technology for the 21st Century, The 117th Meeting, JIM, pp. 290, 1995.
• AKIKAZU SATO. Dislocation Structure and SME in　Austenitic Steels, Proc. Int. Symp. onAdvanced Materials and　Technology for the　21 st Century,the 117 th meeting of JIM, pp. １０１, 1995.
• AKIKAZU SATO. Observation of Crack Propagation in Amorphous Al┣D288┫D2Ce┣D22┫D2Ni┣D29┫D2Fe Containing Nanoscale Crystals, Phil. Mag. Lett., Vol. 71, No. 3, pp. 179-184, 1995.
• AKIKAZU SATO. Crystallization of Al３Ti in Al-5wt%Tiby Centrifugal Castingand the strengthening, Proc. Int. Symp. onAdvanced Materials and　Technology for the　21 st Century,the 117 th meeting of JIM, pp. 1307, 1995.
• AKIKAZU SATO. Dislocation Structure and Strengtheningin Ni３Ge Single Crystals, Proc. Int. Symp. onAdvanced Materials and　Technology for the　21 st Century,the 117 th meeting of JIM, pp. 290, 1995.
• AKIKAZU SATO. Dislocation Structure and SME in Austenitic Steels, Proc. Int. Symp. on Advanced Materials and Technology for the 21st Century, The 117th Meeting, JIM, pp. 101, 1995.
• 佐藤彰一. Fe16N2 析出物の磁気異方性と外部磁場による配向, 機能材料, Vol. １５, No. ２, pp. ２０－３１, 1995.
• AKIKAZU SATO. Formation of h. c. p. and f. c. c. Twins in an Fe-Mn-Cr-Si-Ni Alloy, Acta Metall. Mater., Vol. 42, No. 4, pp. 1201-1213, 1994.
• AKIKAZU SATO. Temperature Dependence of Strain Rate Sensitivity, Work Hardening and Dislocation Structure in Ni┣D23┫D2Al Single Crystals, Philosophical Magazine, Vol. 69, No. 6, pp. 1111-1124, 1994.
• AKIKAZU SATO. Yield Stress of Afed Cu-Fe Alloy Single Crystals at Low Temperatures, J. Materials Science Letters, Vol. 13, pp. 922-924, 1994.
• AKIKAZU SATO. Training Effect in Fe-Mn-Si Shape-Memory, J. of Materials Science, Vol. 28, pp. 1509-1514, 1993.
• AKIKAZU SATO. In Situ Observation of Superdislocation Motion and High-Temperature Strengthening of Ni┣D2O┫D2Al Single Crystals, Philosophical Magazine, Vol. A67, No. 3, pp. 627-641, 1993.
• AKIKAZU SATO. In Situ Observation of Moving Dislocations in a Cu-10Ni-6Sn Spindle Alloy, Acta metall mater., Vol. 41, No. 4, pp. 1047-1055, 1993.
• AKIKAZU SATO. Temperature Dependence of the Amount of Transformed Fe Particles in a Cu-1.5-mass% Fe Alloy, J. of Materials Science, Vol. 28, pp. 4578-4582, 1993.
• AKIKAZU SATO. In-situ Deformation and Description of Mechanical Behaviors in Ni┣D23┫D2Al, Micros. Microanal. Microstruct., Vol. 4, pp. 171-181, 1993.
• Toshioyuki Fujii, Yoshimi Watanabe, Teruhiko Enami, Akikazu Sato, Masaharu Kato. Magnetic Anisotropy Caused by the Formation of Stress-Induced Martensite in Small Iron Particles in a Copper Matrix, ISIJ International, Vol. 32, No. 9, pp. 1027-1033, Sept. 1992.
• AKIKAZU SATO. In Situ Deformation and Unfaulting of Interstitial Loops in ProtonーIrradiated Steels, Philosophical Magazine A, Vol. 65, pp. 6, 1992.
• AKIKAZU SATO. (Review)Martensitic Transformation and Shear Deformation Examined by In-situ Experiments in a HVEM, ISIJ International, Vol. 32, No. 7, pp. 799-811, 1992.
• AKIKAZU SATO. Magnetic Anisotropy Caused by the Formation of Stress-induced Martensite in Small Iron Particles in a Copper Martix, ISIJ International, Vol. 32, No. 9, pp. 1027-1033, 1992.
• AKIKAZU SATO. In-situ Observation of Partial Dislocation Motion during γ→ε Transformation in a Fe-Mn-Si shape Memory Alloy, Materials Transactions, JIM(Special Issue on Martensitic Transformations 'in memory of the late Professor Z. Nishiyama'), Vol. 33, No. 3, pp. 253-262, 1992.
• AKIKAZU SATO. In situ deformation and unfaulting of interstitial loops in proton-irradiated steels, Philosophical Magazine, Vol. A65, No. 6, pp. 1309-1326, 1992.
• AKIKAZU SATO. Martensitic Transformation of Antiferro Magnetic Fe Particles Embedded in a Cu Matrix in a Magnetic Field, 北海道大学工学部研究報告, Vol. 162, pp. 99-108, 1992.
• AKIKAZU SATO. In Situ deformation of proton-irradiated molybdenum in a high-voltage electron microscope, Philosophical Magazine, Vol. A64, No. 2, pp. 395-411, 1991.
• AKIKAZU SATO. In situ deformation of proton-irradiated metals, Ultramicroscopy, Vol. 39, pp. 92-99, 1991.
• AKIKAZU SATO. Development of a Shape Memory Alloy Fe-Mn-Si, Materials Science and Eng., Vol. A146, pp. 197-204, 1991.
• AKIKAZU SATO. Effect of Magnetic Fields on the Formation Fe┣D216┫D2N┣D22┫D2 Precipitates in Fe-N Alloys, Materials Science and Eng., Vol. A146, pp. 151-160, 1991.
• AKIKAZU SATO. Formation of Fe┣D216┫D2N┣D22┫D2 and Development of Magnetic Anisotropy in a Fe-N Alloy, Acta metall. mater., Vol. 39, No. 12, pp. 3161-3166, 1991.
• AKIKAZU SATO. Further analysis on the stress-assisted nucleation of interstitial loops in an electron-irradiated Fe-18Cr-14Ni alloy(Letter to the Editors), Journal of Nuclear Materials, Vol. 184, pp. 144-145, 1991.
• AKIKAZU SATO. In-situ observation of γ→α transformation of Fe particles in a Cu-Fe alloy, Philosophical Magazine, Vol. A64, No. 2, pp. 387-394, 1991.
• AKIKAZU SATO. Growth kinetics and martensitic transformation of larger Fe particles in a Cu-1.5mass%Fe alloy, Journal of Materials Science, Vol. 26, pp. 4307-4312, 1991.
• AKIKAZU SATO. In-situ Observation of γ-ε Transformation in Fe-Mn-Si, Materials Science Forum(ICOMAT-89), Vol. 56-58, pp. 643-648, 1990.
• AKIKAZU SATO. The Effect of Magnetic Field on the Martensitic Transformation of Fe Particles in a Cu-Fe Alloy, Materials Science Forum (ICOMAT-89), Vol. 56-58, pp. 241-246, 1990.
• 佐藤彰一. オーステナイト系鉄基合金の形状記憶効果, セラミックス, Vol. 25, No. 5, pp. 422-427, 1990.
• AKIKAZU SATO. Effect of an Internal Stress on Formation of Stacking Fault Tetrahedra in an Electron-Irradiated Cu-Fe Alloy, Philosophical Magazine, Vol. A61, No. 6, pp. 929-941, 1990.
• AKIKAZU SATO. Stress-Assisted Nucleation of Interstitial Loops in an Electron-irradiated Fe-18Cr-14Ni Alloy, Journal of Nuclear Materials, Vol. 172, pp. 97-105, 1990.
• AKIKAZU SATO. Epitaxy of Cubic Crystals on (001) Cubic Substates, Acta Metallurgica, Vol. 37, No. 3, pp. 749-756, 1989.
• AKIKAZU SATO. Electron Irradiation Hardening of Magnesium and Zinc Single Crystals at 4.2K, Journal of Nuclear Materials, Vol. 169, pp. 64-72, 1989.
• AKIKAZU SATO. Formation of Stacking Fault Tetrahedra around α-Fe Particles in a Cu-Fe Alloy, Philosophical Magazine Letters, Vol. 60, No. 6, pp. 255-259, 1989.
• AKIKAZU SATO. Shape Memory Effect and Physical Properties of Fe-Mn-Si Alloys, MRS Int'1 Mtg. on Adv. Mats., Vol. 9, pp. 431-445, 1989.
• AKIKAZU SATO. Growth of a Nitrogen Defect Cluster in a BCC Lattice Examined by a Lattice Theory, J. Phys. Chem. Solids, Vol. 50, No. 9, pp. 957-961, 1989.
• AKIKAZU SATO. Effect of a Magnetic Field on Martensitic Transformation of Antiferromagnetic Fe Particles in Single Crystals of a Cu-1.5wt%Fe Alloy, Scripta Metallurgica, Vol. 23, pp. 359-362, 1989.
• AKIKAZU SATO. Internal Friction due to ε→γ Reverse Transformation Fe-Mn-Si-Cr shape Memory Alloy, Materials Science and Engineering A, Vol. 101, pp. 25-30, 1988.
• AKIKAZU SATO. Octahedral Defects in a B. C. C. Lattice Examined by Lattice Theory, J. Phys. Chem. Solids, Vol. 49, No. 5, pp. 529-540, 1988.
• AKIKAZU SATO. Stress Aging of a Cu-10Ni-6Sn Spindle Alloy, Acta Metallurgica, Vol. 36, No. 3, pp. 633-640, 1988.
• AKIKAZU SATO. Cyclic Deformation and Fracture Behavior of Fe-Mn-Si Shape Memory Alloys, Proceedings of the International Conference on Martensitic Transformations (The Japan Inst. of Metals), pp. 979-984, 1987.
• 佐藤彰一. 材料設計による形状記憶合金Fe-Mn-Siの発見, 日本結晶学会誌, Vol. 29, No. 3, 1987.
• AKIKAZU SATO. Deformation Behavior and Microstructure of Cu-10Ni-6Sn Spindle Alloy Single Crystals, Materials Science and Engineering, Vol. 77, pp. 95-102, 1986.
• AKIKAZU SATO. F. C. C. to B. C. C. Transformation in Iron Films Deposited onto Copper and Nickel Substrates, Proceedings of the International Conference on Martensitic Transformations(The Japan Inst. of Metals), pp. 343-348, 1986.
• AKIKAZU SATO. F. C. C. to B. C. C. Transformation in Thin Iron Films Deposited onto Copper Single Crystals, Acta Metallurgica, Vol. 34, No. 7, pp. 1179-1188, 1986.
• AKIKAZU SATO. Stress Effect on Formation of Interstitial Loops in an Electron Irradiated Fe-18Cr-14 Ni Alloy, Scripta Metallurgica, Vol. 20, pp. 1119-1124, 1986.
• AKIKAZU SATO. Physical Properties Controlling Shape Memory Effect in FeMn-Si Alloys, Acta Metallurgica, Vol. 34, No. 2, pp. 287-294, 1986.
• AKIKAZU SATO. Nucleaton and Growth of Defect Clusters in an Electron Irradiated CuーFe Alloy, Matericals Science and Engineering, Vol. 81, pp. 427-432, 1986.
• AKIKAZU SATO. Microscopic Observation of Elastic Distortions Caused by Orowan Loops, Acta Metallurgica, Vol. 34, No. 9, pp. 1751-1758, 1986.
• AKIKAZU SATO. Nucleation and Growth of Defect Clusters in an Electron Cu-Fe Alloy, Materials Science and Engineering, Vol. 81, pp. 427-432, 1986.
• AKIKAZU SATO. Climb of Orowan Loops in a Cu-Zn-SiO┣D22┫D2 Alloy, Scripta Metallurgica, Vol. 19, pp. 311-313, 1985.
• AKIKAZU SATO. Observation of dislocation sources in a quenched and stress-aged Al-4wt%Cu alloy single crystal, Philosophical Magazine, Vol. A51, No. 1, pp. 133-143, 1985.
• AKIKAZU SATO. Stress Assisted Nucleation of Vacancy Loops in a Quenched Al-4%Cu Alloy Single Crystal, Scripta Metallurgica, Vol. 19, pp. 377-380, 1985.
• AKIKAZU SATO. Low-Temperature Recovery of Dispersion-Hardened Cu-GeO┣D22┫D2 Alloy Single Crystals, J. Mater. Shi. Lett., Vol. 4, No. 12, pp. 1504-1506, 1985.
• AKIKAZU SATO. Orientation and Composition Dependencies of Shape Memory Effect in Fe-Mn-Si Alloys, Acta Metallurgica, Vol. 32, No. 4, pp. 539-547, 1984.
• AKIKAZU SATO. Elastic Distortion of α-Fe Particles in a Cu Matrix Caused by Orowan Loops, Acta Metallurgica, Vol. 32, No. 5, pp. 655-661, 1984.
• AKIKAZU SATO. Plastic Deformation and Martensitic Transformation of γ-Fe Particles in a Cu-Fe Alloy Single Crystal, Transactions of the Japan Institute of Metals, Vol. 24, No. 12, pp. 863-869, 1984.
• 佐藤彰一. アルミニウム合金の応力時効, 軽金属学会「解説」, Vol. 34, No. 11, pp. 657-663, 1984.
• AKIKAZU SATO. Effect of External Stress on Formation of Vacancy Loops in Quenched Aluminum, Acta Metallurgica, Vol. 31, No. 5, pp. 805-811, 1983.
• AKIKAZU SATO. Orientation Relationship between a Martensitically Transformed α-Iron Particle and Cu Matrix, Acta Metallurgica, Vol. 31, No. 8, pp. 1267-1272, 1983.
• AKIKAZU SATO. Resolution of Cu Atoms in a GP(1) Zone in Al-Cu by FIM and Determination of the GP(1) Structure, Japanese Journal of Applied Physics, Vol. 22, No. 3, pp. L203-L205, 1983.
• AKIKAZU SATO. Internal Friction Caused by Diffusion around a Second Phase Particle- Cu-Fe Alloy, Acta metallurgica, Vol. 31, No. 4, pp. 519-524, 1983.
• 佐藤彰一. 相変態・析出におよぼす応力の影響, 鉄と鋼「技術資料」, Vol. 69, No. 14, 1983.
• AKIKAZU SATO. Hardening Due to Pre-existing ε-Marten-site in an Fe-30Mn-1Si Alloy SingleCrystal, Acta Metallurgica, Vol. 30, No. 10, pp. 1901-1907, 1982.
• AKIKAZU SATO. Shape Memory Effect in γ(]G0228[)ε Transformation in Feー30Mn-1Si Alloy Single Crystal, Acta Metallurgica, Vol. 30, pp. 6, 1982.
• AKIKAZU SATO. Shape Memory Effect and MechanicalBehaviour of an Fe-30Mn-1Si Alloy SingleCrystal, Proceedings of Interna-tional Conference onMartensitic TransformationJournal de Physique, pp. 797-802, 1982.
• AKIKAZU SATO. Calculation of Int1eraction Energy betweena Self-Interstitial and a (1/2)＜111＞Screw Dislocation in BCC Transition Metals: Moments Approach, Philosophical Magazine, Vol. 43B, No. 5, pp. 969-879, 1981.
• AKIKAZU SATO. Calculation of Core Structure and CoreEnergy of a (1/2)<111> Screw Dislocationin BCC Transition Metals: Inclusion ofd-Orbital Anisotropy, Journal of the Physical Society of Japan, Vol. 50, No. 2, pp. 569-576, 1981.
• AKIKAZU SATO. Screw Dislocation Motion in BCC TransitionMetals: Model Calculation Using a Tight-Binding Type Electronic Theory, Philosophical Magazine, Vol. 43B, No. 1, pp. 1-17, 1981.
• AKIKAZU SATO. Calculation of core structure and coreenergy of 1/2<111>{110} and 1/2<111>{112}edge dislocations in b.c.c. transitionmetal: Moments approach, Philosophical Magazine, Vol. 48B, No. 1, pp. 19-28, 1981.
• AKIKAZU SATO. Structural Changes of Iron Particles in aDeformed and Annealed Cu-Fe Alloy SingleCrystals, Transactions of the JapanInstitute of Metals, Vol. 22, No. 1, pp. 65-73, 1981.
• AKIKAZU SATO. Electronic Theory of Screw DislocationMotion in BCC Transition Metals, U.S.-Japan Seminar onCharacteristics of Mecha-nical Properties of Body-Centered-Cubic Metals, 1981.
• AKIKAZU SATO. Effects of d-Orbital Anisotropy on theCore Behavior of a (1/2)<111> ScrewDislocation in BCC Transition Metals, U.S.-Japan Seminar onCharacteristics of Mecha-nical Properties of Body-Centered-Cubic Metals, 1981.
• 佐藤彰一. BCC 遷移金属の強度とｄ 電子状態, 日本金属学会会報 「解説」, Vol. 20, No. 9, pp. 745-752, 1981.
• AKIKAZU SATO. Electronic Theory for Screw Dislocation Motion in Dilute BCC Transition MetalAlloys, Philosophical Magazine, Vol. 44A, No. 4, pp. 799-814, 1981.
• AKIKAZU SATO. Stress Orienting Effect of the Fe16N2 in Fe-N Alloy, Scripta Metallurgica, Vol. 15, No. 2, pp. 131-132, 1981.
• AKIKAZU SATO. Effect of External Stress on the γ→ε→α Martensitic Transformation Examined bya Double Tensile Deformation, Acta Metallurgica, Vol. 28, No. 9, pp. 1223-1228, 1980.
• AKIKAZU SATO. Solid Solution Softening in Fe-N AlloySingle Crystals, Acta Metallurgica, Vol. 28, No. 8, pp. 1077-1083, 1980.
• AKIKAZU SATO. Interaction Energy between a Self-Interstitial and a (1/2)<111> ScrewDislocation in BCC Transition Metals, Journal of the PhysicalSociety of Japan, Vol. 48, No. 4, pp. 1233-1236, 1980.
• AKIKAZU SATO. Stress Induced Martensitic Transformationin Fe-Ni-C Alloy Single Crystals, Acta Metallurgica, Vol. 28, No. 3, pp. 367-376, 1980.
• AKIKAZU SATO. Stress Induced Martensitic Transformationof Fe-Ni-C Alloy Single Crystal, Proceedings of the Inter-national Conference onMartensitic Transformation, Vol. 6, pp. 331-336, 1979.
• AKIKAZU SATO. Reversibility of γ ε Transformation in ←Fe-18Cr-14Ni Alloy Single Crystal, Proceedings of the Inter-national Conference onMartensitic Transformation, Vol. 6, pp. 131-136, 1979.
• AKIKAZU SATO. Stress Distribution around an Inclusion in an Fe-N Single Crystal, Acta Metallurgica, Vol. 27, No. 1, pp. 131-136, 1979.
• AKIKAZU SATO. Orientation dependence of screw disloca-tion motion in bcc transition metals, Solid State Communications, Vol. 29, No. 7, pp. 545-548, 1979.
• AKIKAZU SATO. Martensitic Transformation of Iron Parti-cles in Cu-Fe Alloy Single Crystals, Proceedings of Joint U.S./Japan Seminar, Vol. 6, pp. 132, 1979.
• AKIKAZU SATO. Electronic theory for screw dislocation inb.c.c. transition metals: Calculation ofthe Peierls stress and the core energy, Philosophical Magazine B, Vol. 27, No. 1, pp. 531-, 1978.
• AKIKAZU SATO. Stress Assisted Nucleation of αPrecipitates in Fe-N Single Crystals, Acta Metallurgica, Vol. 26, No. 3, pp. 529-540, 1978.
• AKIKAZU SATO. Stress-Oriented Precipitation of G.P.Zones and θ' in an Al-Cu Alloy, Acta Metallurgica, Vol. 26, No. 4, pp. 499-508, 1978.
• AKIKAZU SATO. Contribution of the γ→ε Transformationto the Plastic Deformation of StainlessSteel Single Crystals, Acta Metallurgica, Vol. 25, No. 6, pp. 627-634, 1977.
• AKIKAZU SATO. Solution Softening and Hardening in theIron-Carbon System, Materials Science andEngineering, Vol. 18, pp. 199, 1975.
• AKIKAZU SATO. Mechanical Effects of Electron Irradia-tion in Iron Single Crystals, Fundamental Aspects of Radiation Damage inMetals, Proceedings of Inter-natioal Conference,Gatlinburg, Tenn., pp. 984-990, 1975.
• AKIKAZU SATO. Deformation Structures in Ultrapure Iron, Philosophical Magazine, Vol. 32, pp. 1107, 1975.
• AKIKAZU SATO. Microyielding and Effect of ElectronIrradiation in High Purity Iron SingleCrystals, physica status solidi(a), Vol. 28, pp. 561-569, 1975.
• AKIKAZU SATO. Recovery of Irradiation-Induced Defects inHigh-Purity Iron-Carbon Solid Solutions, physica status solidi(a), Vol. 22, pp. 253, 1974.
• AKIKAZU SATO. Asymmetry in Yield Stress and Irradiation Softening of High Purity Iron Single Crystals, Scripta Metallurgica, Vol. 8, pp. 851-859, 1974.
• AKIKAZU SATO. Irradiation Softening in Pure Iron SingleCrystals, physica status solidi, Vol. 18, pp. 699-709, 1973.
• AKIKAZU SATO. Solid Solution Softening and Solid Solution Hardening, Acta Metallurgica, pp. 21, 1973.
• AKIKAZU SATO. Effect of Electron Irradiation on theStrength of Iron Single Crystals, The 2nd InternationalConference of the Strengthon Metals and Alloys, ASM, Vol. 2, pp. 747-751, 1970.
• AKIKAZU SATO. Second Order Electrical Resistivity Decayin Quenched Aluminum, Journal of the PhysicalSociety of Japan, Vol. 29, No. 6, pp. 1494-1499, 1970.
• AKIKAZU SATO. Influence of Plastic Deformation on theClustering of Vacancies in Quenched Gold, Journal of the PhysicalSociety of Japan, Vol. 24, No. 3, pp. 461-467, 1968.
• AKIKAZU SATO. On Experimental Determination of StackingFault Energy in Aluminum, The 1st Inter. Conf. onthe Strength Aluminum ofMetals and Alloys, Supple-ment to Transactions ofJapan Inst. of Metals, Vol. 9, pp. 567-568, 1968.
• AKIKAZU SATO. Formation of Dislocation Loops in Degassedand Quenched Aluminum, Journal of the PhysicalSociety of Japan, Vol. 22, No. 5, pp. 1198-1201, 1967.
• AKIKAZU SATO. Quantitative Study of Nucleation andGrowth of Voids in Quenched Aluminum, Proceedings of the SixthInternational Conferencefor Electron Microscopy,Kyoto, pp. 341-342, 1966.
• AKIKAZU SATO. Influence of Plastic Deformation on theClustering of Quenched-in Vacancies inAluminum, Journal of the PhysicalSociety of Japan, Vol. 21, No. 11, pp. 1955-1962, 1966.
• AKIKAZU SATO. Nucleation and Growth of Voids in Quenched Aluminum, Journal of the Physical Society of Japan, Vol. 21, No. 11, pp. 2291-2299, 1966.
• AKIKAZU SATO. Activation Energy of Recrystallization inPure Aluminum, Journal of Science of theHiroshima University, Vol. A-II-29, pp. 57-62, 1965.

国内会議発表 (査読なし・不明)

• 渡邉満洋, 佐藤彰一, 熊井真次. fcc金属の薄膜圧縮試験による強加工と変形組織, 日本金属学会第135回秋期大会講演概要, pp. 294, 2004.

その他の論文・著書など

• 佐藤彰一, 加藤雅治. 相変態・析出におよぼす応力の影響, 鉄と鋼, Vol. 69, No. 14, pp. 1531-1539, 1983.

学位論文

• Effect of Electron Irradiation on the Strength of Iron Single Crystals,  本文,  Ph.D,  Northwestern University,  1971/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]