@book{CTT100661610,
author = {熊井真次},
title = {明日のものづくり技術を支える材料系学生の育成 -東京工業大学 熊井研究室-},
publisher = {素形材センター},
year = 2013,
}
@book{CTT100801626,
author = {Takayama, Y. and Shibayanagi, T. and Matsuda, K. and Tsuchida, T. and SHINJI KUMAI and Umezawa, O. and Sato, T.},
title = {Special issue on aluminium alloys 2010: Preface},
publisher = {},
year = 2011,
}
@book{CTT100553452,
author = {熊井真次},
title = {レアメタルの代替材料とリサイクル},
publisher = {シーエムシー出版},
year = 2008,
}
@book{CTT100469012,
author = {熊井 真次 and 竹山 雅夫 and 入戸野 修 and 芳賀 由美子},
title = {材料の科学と工学},
publisher = {培風館},
year = 2002,
}
@book{CTT100469190,
author = {扇澤敏明 and 久保山敬一 and 熊井真次 and 竹山雅夫 and 入戸野修 and 芳賀由美子 and 安盛敦雄},
title = {材料の科学と工学},
publisher = {培風館},
year = 2002,
}
@book{CTT100452585,
author = {大橋照男 and 吉田英雄 and 里 達雄 and 小林俊郎 and 東郷敬一郎 and 鈴木秀人 and 小川欽也 and 戸梶恵郎 and 熊井真次 and 越智保雄 and 横山 隆 and 戸田裕之 and 菊池正紀},
title = {アルミニウム合金の強度},
publisher = {内田老鶴圃},
year = 2001,
}
@book{CTT100433136,
author = {加藤雅治 and 熊井真次 and 尾中晋},
title = {材料強度学},
publisher = {朝倉書店},
year = 1999,
}
@book{CTT100453996,
author = {Tatsuo Sato and Shinji Kumai and Toshiro Kobayashi and Yotaro Murakami},
title = {ALUMINUM ALLOYS Their Physical and Mechanical Properties},
publisher = {The Japan Institute of Light Metals},
year = 1998,
}
@article{CTT100882061,
author = {Thai Ha Nguyen and Ram Song and Yohei Harada and Shinji Muraishi and Shinji Kumai},
title = {Effect of Large Particles in Central Band of Al4%Mn1%Si High-Speed Twin-Roll Cast Strip on Elongation of Cold-Rolled and Annealed Sheets},
journal = {Materials Transactions},
year = 2022,
}
@article{CTT100903754,
author = {Li Jiedi and Muraishi Shinji and KUmai Shinji},
title = {Experimental and Numerical Analyses of Cooling and Intermediate Layer Formation Process at the Magnetic Pulse Welded Al/Fe Joint Interface},
journal = {MATERIALS TRANSACTIONS},
year = 2021,
}
@article{CTT100903753,
author = {Jiedi Li and Shinji Muraishi and SHINJI KUMAI},
title = {Experimental and Numerical Analyses of Wavy Interface Formation and Local Melting Phenomena at the Magnetic Pulse Welded Al/Fe Joint Interface},
journal = {MATERIALS TRANSACTIONS},
year = 2021,
}
@article{CTT100861840,
author = {川下道宏 and 大野孝之 and 星暁生 and 伊藤健児 and 下平貴之 and 熊井真次},
title = {実機に搭載された多層ベローズ排気管の破損メカニズムの解明},
journal = {日本機械学会論文集},
year = 2021,
}
@article{CTT100853251,
author = {熊井真次},
title = {電磁成形したA1050アルミニウム板の電磁成形挙動と高速変形組織},
journal = {軽金属},
year = 2021,
}
@article{CTT100838193,
author = {Thai Ha Nguyen and Ram Song and Yohei Harada and SHINJI KUMAI},
title = {Color metallography of characteristic microstructure in high-speed twin-roll cast Al-Mn-Si alloy strip using Weck’s reagent},
journal = {MATERIALS TRANSACTIONS},
year = 2020,
}
@article{CTT100834867,
author = {Y. Harada and H. Shinohara and T. Goda and S. Kumai},
title = {Reduction of elongation anisotropy in cold-rolled and annealed Al-7%Si alloy strips fabricated by vertical-type high-speed twin-roll casting},
journal = {MATERIALS TRANSACTIONS},
year = 2020,
}
@article{CTT100834868,
author = {S. Lei and L. Gao and Y. Harada and S. Kumai},
title = {Microstructure Analysis of Quenched Semi-Solid A356 Aluminum Alloy Slurry by Using Weck’s Reagent},
journal = {MATERIALS TRANSACTIONS},
year = 2020,
}
@article{CTT100861841,
author = {川下道宏 and 下平貴之 and 大野孝之 and 星暁生 and 伊藤健児 and 宍道康彦 and 熊井真次},
title = {多層ベローズ排気管の疲労寿命評価技術の開発},
journal = {日本機械学会論文集},
year = 2020,
}
@article{CTT100836269,
author = {Mitsuhiro Watanabe and SHINJI KUMAI},
title = {Dissimilar Metal Lap Welding of A5052 Aluminum Alloy and TP340 Pure Titanium Plates by using Magnetic Pulse Welding},
journal = {Journal of Light Metal Welding},
year = 2020,
}
@article{CTT100836323,
author = {Takashi Kambe and Yasutaka Kedo and Shinji Muraishi and SHINJI KUMAI},
title = {Experimental and Numerical Analyses of Magnetic Pulse Forming of A1050 Aluminum Sheet},
journal = {Materials Transactions},
year = 2020,
}
@article{CTT100813632,
author = {Takashi Kambe and Shinji Muraishi and Shinji Kumai},
title = {Experimental and Numerical Analysis of MPW and MPF of Al Sheet},
journal = {The 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@article{CTT100813634,
author = {Jiedi Li and Shinji Muraishi and Shinji Kumai},
title = {Influence of Kinetic Parameters on Interface Formation of Al/Fe Magnetic Pulse Welded Joints},
journal = {Proceedings of the 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@article{CTT100813636,
author = {Maya Okihara and Shinji Muraishi and Shinji Kumai},
title = {Welding Interface of MPWed Aluminium Plates with Different Hardness},
journal = {Proceedings of the 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@article{CTT100813637,
author = {Yohei Harada and Taichi Asakura and Shinji Kumai},
title = {Joining of Aluminum Alloy Stud and Aluminum alloy/Resin Composite Panel by Solid-State Stud-Welding},
journal = {Proceedings of the 14th International Aluminum Conference (INALCO2019)},
year = 2019,
}
@article{CTT100807836,
author = {Y. Harada and N. Jiang and S. Kumai},
title = {Mechanical properties of cold-rolled and annealed Al-12%Mg alloy sheet with high Mg solid solubility fabricated from vertical-type high-speed twin-roll cast strip},
journal = {Materials Transactions},
year = 2019,
}
@article{CTT100813651,
author = {Mitsuhiro Watanabe and Shinji Kumai},
title = {Dissimilar Metal Lap Joining of A5052 Aluminum Alloy Plate and TP340 Pure Titanium Plate by Magnetic Pulse Welding},
journal = {Proceedings of the 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@article{CTT100813639,
author = {Min-Seok Kim and Hyoung-Wook Kim and Su-Hyeon Kim and Shinji Kumai},
title = {Role of Roll Separation Force in High-Speed Twin-Roll Casting of Aluminum Alloys},
journal = {Metals},
year = 2019,
}
@article{CTT100836272,
author = {Tomoo Goda and SHINJI KUMAI},
title = {Center Segregation and Cross-Hatched Surface Pattern of Vertical-Type High-Speed Twin-Roll Cast Al-Si-Mg Alloy Strip Formed by Wide Rolls},
journal = {Materials Transactions},
year = 2019,
}
@article{CTT100813638,
author = {Tomoo Goda and Shinji Kumai},
title = {Center Segregation and Cross-Hatched Surface Pattern of Vertical-Type High-Speed Twin-Roll Cast Al-Si-Mg Alloy Strip Formed by Wide Rolls},
journal = {Materials Transactions},
year = 2019,
}
@article{CTT100800492,
author = {高山雄介 and 原田陽平 and 村石信二 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したA3003/A4045クラッド材界面の接合状態},
journal = {鋳造工学},
year = 2019,
}
@article{CTT100813643,
author = {Ram Song and Shinji Kumai},
title = {Solidification Structure and Secondary Particles in Vertical-Type High-Speed Twin-Roll Cast 3003 Aluminum alloy Strip},
journal = {Materials Transactions},
year = 2019,
}
@article{CTT100786115,
author = {D. Kikuchi and Y. Harada and S. Kumai},
title = {Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin-roll casting},
journal = {Journal of Manufacturing Processes},
year = 2019,
}
@article{CTT100786116,
author = {原田陽平 and Nan Jiang and 熊井真次},
title = {縦型高速双ロールキャストしたAl-Mg合金板の表面模様に及ぼすMg含有量の影響},
journal = {鋳造工学},
year = 2019,
}
@article{CTT100777482,
author = {Tomoo Goda and Shinji Kumai},
title = {Microstructure and Elongation Anisotropy of Cold Rolled and solution Treated A356 Alloy Strips Fabricated via High-Speed Twin-Roll Casting},
journal = {Materials Transactions},
year = 2018,
}
@article{CTT100777428,
author = {Mitsuhiro Watanabe and Kentaro Ishiuchi and Shinji Kumai},
title = {Interfacial Microstructure and Hardness of Magnetic Pulse Welded Copper/Nickel Lap Joint},
journal = {Materials Transactions},
year = 2018,
}
@article{CTT100777427,
author = {熊井真次},
title = {異種金属の衝撃圧接},
journal = {溶接学会誌},
year = 2018,
}
@article{CTT100758186,
author = {R. Song and Y. Harada and S. Kumai},
title = {Influence of cooling rate on primary particle and solute distribution in high-speed twin-roll cast Al-Mn based alloy strip},
journal = {Materials Transactions},
year = 2018,
}
@article{CTT100758185,
author = {原田陽平 and 浅倉太一 and 熊井真次},
title = {アルミニウム合金スタッドとアルミニウム合金/樹脂積層板の固相スタッド接合},
journal = {軽金属},
year = 2017,
}
@article{CTT100753551,
author = {高山雄介 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法で作製したAl-Mn/Al-Si合金クラッド材皮材の凝固挙動},
journal = {鋳造工学},
year = 2017,
}
@article{CTT100752744,
author = {Min-Seok Kim and Hyoung-Wook Kim and SHINJI KUMAI},
title = {Direct Temperature Measurement of Al-2mass%Si Alloy Strips during High-Speed Twn-Roll Casting and Its Application in Determining Melt/Roll Heat Transfer Coeeficient for Simulation},
journal = {MATERIALS TRANSACTIONS},
year = 2017,
}
@article{CTT100752339,
author = {西脇淳人 and 熊井真次},
title = {Cu/Al爆発圧接材の接合界面の冷却過程および中間層の生成過程のシミュレーション},
journal = {溶接学会論文集},
year = 2017,
}
@article{CTT100743196,
author = {K. Prapasajchavet and Y. Harada and S. Kumai},
title = {Microstructure analysis of Al-5.5at%Mg alloy semi-solid slurry by Weck's reagent},
journal = {International Journal of Metalcasting},
year = 2017,
}
@article{CTT100752484,
author = {Seweon Choi and Hoonsung Cho and SHINJI KUMAI},
title = {Titanium as an intermetallic phase stabilizer and its effect on the mechanical and thermal properties of Al-Si-Mg-Cu-Ti alloy},
journal = {Materials Science and Engineering: A},
year = 2016,
}
@article{CTT100752482,
author = {Seweon Choi and Hoonsung Cho and SHINJI KUMAI},
title = {Effect of the preipitation of secondary phases on the thermal diffusivity and thermal conductivity of Al-4.5Cu alloy},
journal = {Journal of Alloys and Compounds},
year = 2016,
}
@article{CTT100752481,
author = {Seweon Choi and Hoonsung Cho and SHINJI KUMAI},
title = {Influence of precipitation on the coefficient of thermal expansion of l-Si-Mg-Cu-(Ti) alloys},
journal = {Journal of Alloys and Compounds},
year = 2016,
}
@article{CTT100752376,
author = {吉野路英 and 岩尾 祥平 and 江戸 正和 and 村石信二 and 熊井真次},
title = {ろう付処理したAl-Mn系合金の材料特性に及ぼす均質化処理およびろう付条件の影響},
journal = {軽金属},
year = 2016,
}
@article{CTT100726557,
author = {高山雄介 and 山野花穂 and 成田渉 and 中村亮司 and 筒井あかり and 原田陽平 and 村石信二 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製した熱交換器材料の組織とろう付特性},
journal = {鋳造工学},
year = 2016,
}
@article{CTT100719717,
author = {Y. Aizawa and J. Nishiwaki and Y. Harada and S. Muraishi and S. Kumai},
title = {Experimental and Numerical Analysis of the Formation Behavior of Intermediate Layers at Explosive Welded Al/Fe Joint Interfaces},
journal = {Journal of Manufacturing Processes},
year = 2016,
}
@article{CTT100719938,
author = {原田陽平 and 山田洋希 and 熊井真次},
title = {固相スタッド接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織と温度履歴},
journal = {軽金属},
year = 2016,
}
@article{CTT100709466,
author = {Y. Harada and Y. Sada and S. Kumai},
title = {Joining Steel Studs and Steel Plates by Solid-State Stud Welding and Estimation of Temperature near the Joint Interface},
journal = {Journal of Manufacturing Processes},
year = 2016,
}
@article{CTT100752372,
author = {西脇淳人 and 熊井真次},
title = {Cu/Al爆発圧接界面における局所融解領域形成に関するシミュレーション},
journal = {溶接学会論文集},
year = 2016,
}
@article{CTT100752492,
author = {米原 牧子 and 熊井真次 and 磯野 宏秋 and 木原 幸一郎 and 杉林 俊雄},
title = {銅及び銅合金の色とテクスチャ評価},
journal = {銅と銅合金},
year = 2016,
}
@article{CTT100719589,
author = {熊井真次},
title = {銅及び銅合金の色とテクスチャ評価},
journal = {銅と銅合金},
year = 2016,
}
@article{CTT100752479,
author = {Seweon Choi and Hoonsung Cho and Changseog Kang and SHINJI KUMAI},
title = {Precipitation dependence of thermal properties for Al-Si-Mg-Ciu-(Ti) alloy with variou heat treatment},
journal = {Journal of Alloys and Compounds},
year = 2015,
}
@article{CTT100698912,
author = {原田陽平 and 山本裕晃 and 長野新介 and 金民錫 and 熊井真次},
title = {展伸材への利用に向けた鋳造用アルミニウム合金の高速双ロールキャストによる高性能化},
journal = {鋳造工学},
year = 2015,
}
@article{CTT100698629,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Microstructural characterization of aluminum alloys using Weck's reagent, part II: Coloring mechanism},
journal = {Materials Characterization},
year = 2015,
}
@article{CTT100698628,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Microstructural characterization of aluminum alloys using Weck's reagent, part I: Applications, Materials Characterization},
journal = {Materials Characterization},
year = 2015,
}
@article{CTT100690356,
author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
title = {Cu/Al爆発圧接材の接合プロセスと接合界面形態の数値解析},
journal = {スマートプロセス学会誌},
year = 2015,
}
@article{CTT100752476,
author = {Seweon Choi and Yumi Kim and Kyungmin Lee and Sungkil Hong and Youungchan Kim and SHINJI KUMAI},
title = {The effects of cooling rate and heat treatment on mechanical and thermal characteristics of Al-Si-Cu-Mg foundry alloys},
journal = {Journal of Alloys and Compounds},
year = 2014,
}
@article{CTT100679024,
author = {中村亮司 and 筒井あかり and 羽賀俊雄 and 原田陽平 and 熊井真次 and 寺山和子 and 新倉昭男},
title = {タンデム式縦型高速双ロールキャスト法で作製した4045/3003/4045アルミニウム合金クラッド材の組織と機械的性質},
journal = {軽金属},
year = 2014,
}
@article{CTT100679027,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Visualization of solute distributions in dendritic and spheroidized Al grains characterized by both color etching method and electron probe microanalysis},
journal = {Journal of Materials Science},
year = 2014,
}
@article{CTT100676289,
author = {Y. Harada and Y. Sada and S. Kumai},
title = {Dissimilar joining of AA2024 aluminum studs and AZ80 magnesium plates by high-speed solid-state welding},
journal = {Journal of Materials Processing Technology},
year = 2014,
}
@article{CTT100801647,
author = {Haga, T. and Tsuge, H. and Ishihara, T. and SHINJI KUMAI and Watari, H.},
title = {A vertical type tandem twin roll caster for clad strip equipped with a scraper},
journal = {Key Engineering Materials},
year = 2014,
}
@article{CTT100676290,
author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
title = {タンデム式縦型双ロールキャスト法で作製したA4045/A3003/A4045合金クラッド材の接合界面組織},
journal = {鋳造工学},
year = 2014,
}
@article{CTT100661604,
author = {SHINJI KUMAI},
title = {Solidification Structure and Casting Defects in High-Speed Twin-Roll Cast Al-2 mass%Si Alloy Strip},
journal = {Materials Transactions},
year = 2013,
}
@article{CTT100657795,
author = {Yohei Harada and Shinji Kumai},
title = {Effect of ceramics coating using sol-gel processing on corrosion resistance and age hardening of AZ80 magnesium alloy substrate},
journal = {Surface & Coatings Technology},
year = 2013,
}
@article{CTT100661605,
author = {SHINJI KUMAI},
title = {Influence of probe bottom shape on microstructure and mechanical properties in friction stir spot welded 6022 aluminum alloy sheets},
journal = {Journal of Light Metal Welding},
year = 2013,
}
@article{CTT100658466,
author = {下坂大輔 and 越川翔太 and 原田陽平 and 熊井真次},
title = {急冷凝固したAl-11%Si-2.5%Cu合金板の曲げ性に及ぼす共晶Si相形態の影響},
journal = {鋳造工学},
year = 2013,
}
@article{CTT100657743,
author = {下坂大輔 and 原田陽平 and 熊井真次},
title = {急冷凝固したAl-11%Si-2.5%Cu合金の共晶Si相形態の変化と機械的性質への影響},
journal = {鋳造工学},
year = 2013,
}
@article{CTT100801543,
author = {Haga, T. and Nakamura, R. and SHINJI KUMAI and Watari, H.},
title = {A vertical type twin roll caster for an aluminium alloy clad strip},
journal = {Archives of Materials Science and Engineering},
year = 2013,
}
@article{CTT100801032,
author = {Haga, T. and Tsuge, H. and SHINJI KUMAI and Watari, H.},
title = {A roll caster to cast clad strip},
journal = {Key Engineering Materials},
year = 2013,
}
@article{CTT100653338,
author = {髙谷謙斗 and 原田陽平 and 熊井真次 and 北山健二},
title = {高速固相接合した2024アルミニウム合金スタッドと6N01アルミニウム合金板の界面組織と機械的性質},
journal = {軽金属},
year = 2012,
}
@article{CTT100639958,
author = {Li Gao and Yohei Harada and Shinji Kumai},
title = {Analysis of Microstructure Evolution and Precise Solid Fraction Evaluation of A356 Aluminum Alloy during Partial Re-Melting by a Color Etching Method},
journal = {Journal of Materials Science},
year = 2012,
}
@article{CTT100802178,
author = {熊井真次 and 林田 慶祐},
title = {プロジェクション形状改良による2024アルミニウム合金スタッド/5052アルミニウム合金薄板高速固相接合材の接合強度の向上},
journal = {軽金属},
year = 2012,
}
@article{CTT100802195,
author = {熊井真次 and 高谷 謙斗},
title = {高速固相接合した2024アルミニウム合金スタッドと5052アルミニウム合金板の組織と強度に及ぼす板厚の影響},
journal = {軽金属},
year = 2012,
}
@article{CTT100638666,
author = {SHINJI KUMAI},
title = {Microstructural Characterization of Intermediate Layer Produced at aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding},
journal = {Materials Transactions},
year = 2012,
}
@article{CTT100639858,
author = {SHINJI KUMAI},
title = {Analysis of microstructure evolution and precise solid fraction evaluation of A356 aluminum alloy during partial re-melting by a color etching method},
journal = {Jornal of Materials Science},
year = 2012,
}
@article{CTT100638667,
author = {熊井真次},
title = {スクレイパを用いた単ロール法によるアルミニウム合金板の作製},
journal = {軽金属},
year = 2012,
}
@article{CTT100634851,
author = {SHINJI KUMAI},
title = {A single roll caster for aluminum alloy strip},
journal = {Advanced Materials Research},
year = 2012,
}
@article{CTT100634852,
author = {SHINJI KUMAI},
title = {Roll casting of recycled AA5182},
journal = {Applied Mechanics and Materials},
year = 2012,
}
@article{CTT100801729,
author = {Haga, T. and Komeda, K. and Mtsuoka, K. and SHINJI KUMAI and Watari, H.},
title = {Effect of Si on AA5182 strip cast by a high speed twin roll caster},
journal = {Applied Mechanics and Materials},
year = 2012,
}
@article{CTT100801697,
author = {Yamashiki, T. and Haga, T. and SHINJI KUMAI and Watari, H.},
title = {Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster},
journal = {Applied Mechanics and Materials},
year = 2012,
}
@article{CTT100801111,
author = {Haga, T. and SHINJI KUMAI and Watari, H.},
title = {Strip casting of recycled aluminum alloys by a twin roll caster},
journal = {Waste and Biomass Valorization},
year = 2012,
}
@article{CTT100634848,
author = {SHINJI KUMAI},
title = {Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper},
journal = {Advanced Materials Research},
year = 2012,
}
@article{CTT100801248,
author = {Haga, T. and Akitsu, K. and Kamakura, K. and SHINJI KUMAI and Watari, H.},
title = {Single roll caster equipped with a scraper},
journal = {Key Engineering Materials},
year = 2012,
}
@article{CTT100634849,
author = {SHINJI KUMAI},
title = {Strip casting of Al-25%Si alloy},
journal = {Advanced Materials Research},
year = 2012,
}
@article{CTT100634850,
author = {SHINJI KUMAI},
title = {Roll casting of clad strip},
journal = {Materials Science forum},
year = 2012,
}
@article{CTT100634025,
author = {熊井真次},
title = {電磁シーム溶接による純アルミニウム多層板の接合挙動と接合界面組織},
journal = {軽金属溶接},
year = 2011,
}
@article{CTT100802043,
author = {馮 科研 and 渡邉 満洋 and 熊井真次},
title = {6022アルミニウム合金板/めっき鋼板摩擦攪拌スポット接合材のミクロ組織と接合強度},
journal = {軽金属},
year = 2011,
}
@article{CTT100634051,
author = {SHINJI KUMAI},
title = {Microstructure and joint Strength of Friction Stir Spot Welded 6022 aluminum Alloy Sheets and Plated Steel sheets},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634026,
author = {熊井真次},
title = {衝撃圧着時のメタルジェット放出および接合界面形態に関する数値解析ならびに実験的検討},
journal = {軽金属},
year = 2011,
}
@article{CTT100634047,
author = {熊井真次},
title = {Al-5.5%Mg-2.3%Si-0.6%MnおよびAl-13%Mg2Si擬二元系合金の第二相粒子形態と引裂靭性の及ぼす凝固中の冷却速度の影響},
journal = {軽金属},
year = 2011,
}
@article{CTT100634049,
author = {SHINJI KUMAI},
title = {Simulation and Experimental Analysis of Metal Jet Emission and weld Interface Morphology in Impact Welding},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634029,
author = {SHINJI KUMAI},
title = {Advanced High-Speed Solid-State Joining of 2024 Aluminum Alloy Studs to 5052 Aluminum Alloy Plates},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634032,
author = {熊井真次},
title = {新しい高速固相接合法による2024アルミニウム合金製スタッドと5052アルミニウム合金板の接合},
journal = {軽金属},
year = 2011,
}
@article{CTT100634039,
author = {SHINJI KUMAI},
title = {Growth Manner of Intermetallic Compound Layer Produced at Welding Interface of Friction Stir Spot Welded Aluminum/Steel Lap Joint},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634041,
author = {SHINJI KUMAI},
title = {Effect of Si Content on Strip Thickness and solidified Structure in High-Speed Twin-Roll ast Al-Si Alloy Strips},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634044,
author = {SHINJI KUMAI},
title = {Effect of Cooling Rates during Solidification of Al-5.5%Mg-2.3%Si-0.6%Mn and Al-13%Mg2Si Pseudo-Binary Alloys on Their Secondary-Particle Morphology and Tear Toughness},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100801831,
author = {米原 牧子 and 熊井真次 and 磯野 宏秋 and 杉林 俊雄},
title = {金属表面のテクスチャ評価指標 : 表面性状が光沢度および表面色に及ぼす影響},
journal = {実験力学 : journal of JSEM},
year = 2011,
}
@article{CTT100634027,
author = {熊井真次},
title = {電子ビーム溶接したNi基超合金/合金鋼異材接合部のミクロ組織と引張強度},
journal = {溶接学会論文集},
year = 2011,
}
@article{CTT100802070,
author = {秋津 和哉 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {スクレイパーを用いたロールキャスターによるアルミニウム合金板の作製},
journal = {日本機械学会論文集 A編},
year = 2011,
}
@article{CTT100634853,
author = {SHINJI KUMAI},
title = {Casting of aluminum alloy clad strip using a roll caster},
journal = {Journal of solid mechanics and materials engineering},
year = 2011,
}
@article{CTT100633121,
author = {Y. Harada and S. Tamura and S. Kumai},
title = {Effects of High-Temperature Solutionizing on Microstructure and Tear Toughness of A356 Cast Aluminum Alloy},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100801982,
author = {中村 亮司 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {クラッド材作製用縦型タンデム双ロールキャスターの特性},
journal = {日本機械学会論文集 A編},
year = 2011,
}
@article{CTT100633120,
author = {原田陽平 and 田村信一 and 熊井真次},
title = {A356アルミニウム合金鋳物の組織と引裂靭性に及ぼす高温溶体化処理の影響},
journal = {軽金属},
year = 2011,
}
@article{CTT100634855,
author = {SHINJI KUMAI},
title = {Effect of Si content of Al-Si matrix on roll cast wire inseted strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100634854,
author = {SHINJI KUMAI},
title = {Casting of wire inserted strip using a twin roll caster equipped with two nozzles},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638482,
author = {SHINJI KUMAI},
title = {Effect of some factors on fabrication of clad strip by a roll caster},
journal = {Advanced Material Research},
year = 2011,
}
@article{CTT100638485,
author = {SHINJI KUMAI},
title = {Strip casting of 6061 and recycled 6061 alloy by an unequal diameter twin roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638486,
author = {SHINJI KUMAI},
title = {Roll casting of Al-40%Sn-1%Cu alloy strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638487,
author = {SHINJI KUMAI},
title = {Casting of Al-25%Si strip using a vertical type twin roll caster},
journal = {Advanced Materials Reseach},
year = 2011,
}
@article{CTT100638488,
author = {SHINJI KUMAI},
title = {Clad strip casting by a roll caster},
journal = {Applied Mechanics and Materials},
year = 2011,
}
@article{CTT100638489,
author = {SHINJI KUMAI},
title = {Casting of clad strip by a roll caster},
journal = {Materials Science Forum},
year = 2011,
}
@article{CTT100638490,
author = {SHINJI KUMAI},
title = {Roll casting of Al-SiCp strip},
journal = {Materials Science Forum},
year = 2011,
}
@article{CTT100638491,
author = {SHINJI KUMAI},
title = {Clad strip casting using a twin roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638492,
author = {SHINJI KUMAI},
title = {Improvement of porosity of strip using a scraper on the casting by a vertical type high speed roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100801713,
author = {Haga, T. and Takahashi, K. and SHINJI KUMAI and Watari, H.},
title = {Roll casting of a wire inserted strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638493,
author = {SHINJI KUMAI},
title = {High speed twin roll casting of Al-Mg alloys},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638506,
author = {SHINJI KUMAI},
title = {Casting of net inserted aluminum alloy composite strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100610105,
author = {Shinji Kumai and Mitsuhiro Watanabe and Keyan Feng},
title = {Microstructure and joint strength of similar- and dissimilar lap joints fabricated by several advanced solid-state welding methods},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100610106,
author = {Keyan Feng and Mitsuhiro Watanabe and Shinji Kumai},
title = {Joint interface morphology of friction stir spot welded aluminum alloy sheets and plated steel sheets},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100610104,
author = {Mitsuhiro Watanabe and Shinji Kumai},
title = {Welding interface in magnetic pulse welded joints},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100638517,
author = {SHINJI KUMAI},
title = {Roll casting of three layers clad strip},
journal = {Key Engineering Materials},
year = 2010,
}
@article{CTT100801676,
author = {Nakamura, R. and Haga, T. and SHINJI KUMAI and Watari, H.},
title = {Casting of aluminium alloy clad strip using a vertical type tandem twin roll Caster},
journal = {Proceedings of the 36th International MATADOR Conference},
year = 2010,
}
@article{CTT100801378,
author = {Akitsu, K. and Haga, T. and SHINJI KUMAI and Watari, H.},
title = {Casting of aluminum alloy strip by improved single-roll caster},
journal = {Proceedings of the 36th International MATADOR Conference},
year = 2010,
}
@article{CTT100801275,
author = {Serizawa, H. and Shibahara, I. and Rashed, S. and Murakawa, H. and SHINJI KUMAI},
title = {Effect of various factors on interface formation in magnetic pressure seam welding},
journal = {Ceramic Engineering and Science Proceedings},
year = 2010,
}
@article{CTT100801150,
author = {Nakamura, R. and Haga, T. and Tsuge, H. and Watari, H. and SHINJI KUMAI},
title = {Roll casting of aluminum alloy clad strip},
journal = {AIP Conference Proceedings},
year = 2010,
}
@article{CTT100801129,
author = {Kim and M.-S. and Arai, Y. and Hon, Y. and SHINJI KUMAI},
title = {Formation of internai crack in high-speed twin-roll cast 6022 aluminum alloy strip},
journal = {Materials Transactions},
year = 2010,
}
@article{CTT100801127,
author = {Haga, T. and Sawai, M. and Nakamura, R. and Watari, H. and SHINJI KUMAI},
title = {Casting of clad strip by an unequal diameter twin roll caster},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100801060,
author = {Miyazaki, S. and SHINJI KUMAI and Sato, A.},
title = {Plastic deformation of a monoclinic Al13Fe4at 300 ∼ 873 K},
journal = {Philosophical Magazine},
year = 2010,
}
@article{CTT100638512,
author = {SHINJI KUMAI},
title = {Roll casting of Al-SiCp composite strip},
journal = {Advanced Materials Research},
year = 2010,
}
@article{CTT100638513,
author = {SHINJI KUMAI},
title = {Inline rolling of 5182 aluminum alloy strip cast by a vertical type high speed twin roll caster},
journal = {Advanced Materials Research},
year = 2010,
}
@article{CTT100638514,
author = {SHINJI KUMAI},
title = {In-line rolling of aluminum alloy strip cast by a high speed twin roll caster},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100638515,
author = {SHINJI KUMAI},
title = {Roll casting of Al-SiCp strip},
journal = {Materials Science Forum},
year = 2010,
}
@article{CTT100638516,
author = {SHINJI KUMAI},
title = {Strip casting by a single roll caster equipped with a scraper},
journal = {Key Engineering Materials},
year = 2010,
}
@article{CTT100638522,
author = {SHINJI KUMAI},
title = {Casting of aluminum alloy clad strip using a vertical type tandem twin roll caster},
journal = {Advanced Materials Research},
year = 2010,
}
@article{CTT100638523,
author = {SHINJI KUMAI},
title = {Roll casting of Al-25%Si alloy},
journal = {Advanced Materials Research},
year = 2010,
}
@article{CTT100638540,
author = {SHINJI KUMAI},
title = {Roll caster for the three-layer clad-strip},
journal = {Archives of Materials Science and engineering},
year = 2010,
}
@article{CTT100638541,
author = {SHINJI KUMAI},
title = {Clad strip casting by a twin roll caster},
journal = {Archives of Materials Science and Engineering},
year = 2010,
}
@article{CTT100590412,
author = {渡邉満洋 and 熊井真次},
title = {電磁力衝撃圧着における純アルミニウム板の高速変形ならびに衝突挙動},
journal = {軽金属},
year = 2009,
}
@article{CTT100588657,
author = {Mitsuhiro Watanabe and Shinji Kumai},
title = {High-Speed Deformation and Collision Behavior of Pure Aluminum Plates in Magnetic Pulse Welding},
journal = {Materials Transactions},
year = 2009,
}
@article{CTT100576811,
author = {Mitsuhiro Watanabe and Shinji Kumai and Go Hagimoto and Qingsheng Zhang and Koji Nakayama},
title = {Interfacial Microstructure of Aluminum/Metallic Glass Lap Joints Fabricated by Magnetic Pulse Welding},
journal = {Materials Transactions},
year = 2009,
}
@article{CTT100574891,
author = {渡邉満洋 and 熊井真次},
title = {電磁力衝撃圧着したAl/AlおよびCu/Cu重ね合せ接合材の接合界面形態},
journal = {軽金属},
year = 2009,
}
@article{CTT100570678,
author = {Mitsuhiro Watanabe and Shinji Kumai},
title = {Interfacial Morphology of Magnetic Pulse Welded Aluminum/Aluminum and Copper/Copper Lap Joints},
journal = {Materials Transactions},
year = 2009,
}
@article{CTT100638542,
author = {SHINJI KUMAI},
title = {Roll casting of 5182 aluminum alloy},
journal = {Journal of Achevements in Materials and Manufacturing Engineering},
year = 2009,
}
@article{CTT100567288,
author = {Mitsuhiro Watanabe and SHINJI KUMAI and 岡川啓悟 and 相沢友勝},
title = {In-situ Observation of Magnetic Pulse Welding Process for Similar and Dissimilar Lap Joints Using a High-Speed Video Camera},
journal = {Aluminium Alloys},
year = 2008,
}
@article{CTT100567293,
author = {Shinji Kumai and Kwang-Jin Lee and Mitsuhiro Watanabe},
title = {Characteristic Interfacial Microstructure of Aluminum Alloy / Steel Lap Joints Fabricated by Several Advanced Welding Methods},
journal = {Aluminium Alloys},
year = 2008,
}
@article{CTT100638543,
author = {SHINJI KUMAI},
title = {Casting of aluminum alloy bar by semisplid roll casting},
journal = {Solid State Phenomena},
year = 2008,
}
@article{CTT100638587,
author = {SHINJI KUMAI},
title = {Casting of aluminum alloy strip using an unequal diameter twin roll caster},
journal = {Archives of Materials Science and engineering},
year = 2008,
}
@article{CTT100638586,
author = {SHINJI KUMAI},
title = {Grooved Roll for a High Speed Twin Roll Caster},
journal = {Archives of Materials science and Engineering},
year = 2008,
}
@article{CTT100638585,
author = {SHINJI KUMAI},
title = {High Speed Twin Roll Casting of 6061 Alloy Strips},
journal = {Archives of Materials Science and Engineering},
year = 2008,
}
@article{CTT100553331,
author = {熊井真次},
title = {直径1500mm双ロールキャスターによる6061アルミニウム合金板の作製},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100553338,
author = {SHINJI KUMAI},
title = {Formability of roll cast recycled aluminum alloy},
journal = {Key Engineering Materials},
year = 2007,
}
@article{CTT100553425,
author = {SHINJI KUMAI},
title = {Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding},
journal = {Mater. Sci. and Eng. A},
year = 2007,
}
@article{CTT100553231,
author = {熊井真次},
title = {凝固組織微細化によるADC12アルミニウム合金の引裂靭性の向上},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100553343,
author = {SHINJI KUMAI},
title = {Casting of Al-Si hypereutectic aluminum alloy strip using an unequal diameter twin roll caster},
journal = {J. Materials Processing and Technology},
year = 2007,
}
@article{CTT100553363,
author = {SHINJI KUMAI},
title = {High speed twin roll casting of recycled Al-3Si-0.6Mg strip},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2007,
}
@article{CTT100553370,
author = {SHINJI KUMAI},
title = {High speed twin roll casting of 6016 aluminium alloy strip},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2007,
}
@article{CTT100553356,
author = {SHINJI KUMAI},
title = {Roll casting of wire inserted aluminum alloy strip},
journal = {J. Materials Processing and Technology},
year = 2007,
}
@article{CTT100553225,
author = {熊井真次},
title = {アルミニウム合金鋳物・ダイカストの新しい引裂靭性表示法},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100567287,
author = {渡邉満洋 and 大川武士 and 熊井真次},
title = {アルミニウム合金/鋼摩擦攪拌重ね合せ接合界面における層状組織の生成},
journal = {軽金属},
year = 2007,
}
@article{CTT100567285,
author = {熊井真次 and 佐藤 宏昌 and 鈴木 健太 and 大川武士 and 李光鎭 and 渡邉満洋},
title = {アルミニウム合金/鋼摩擦攪拌重ね合せ接合材の組織と接合強度に及ぼすプローブ先端位置の影響},
journal = {軽金属},
year = 2007,
}
@article{CTT100553373,
author = {熊井真次},
title = {アルミニウム合金/鋼摩擦攪拌重ね合せ接合界面における層状組織の生成},
journal = {軽金属},
year = 2007,
}
@article{CTT100553372,
author = {熊井真次},
title = {アルミニウム合金/鋼摩擦攪拌重ね合せ接合材の組織と接合強度に及ぼすプローブ先端位置の影響},
journal = {軽金属},
year = 2007,
}
@article{CTT100553250,
author = {熊井真次},
title = {高速双ロールキャスタにより作製した鉄量の多い6022アルミニウム合金板の機械的性質},
journal = {軽金属},
year = 2007,
}
@article{CTT100638589,
author = {熊井真次},
title = {直径1500mm双ロールキャスタによる6016合金板の作製},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100638588,
author = {熊井真次},
title = {異径ロールキャスタによる6061アルミニウム合金板の鋳造とその薄板の特性},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100553326,
author = {熊井真次},
title = {異径双ロールキャスタによる6061アルミニウム合金板の作製},
journal = {鋳造工学},
year = 2007,
}
@article{CTT100553384,
author = {SHINJI KUMAI},
title = {Growth manner of intermetallic compounds at the weld interface of steel/aluminum alloy lap joint fabricated by a defocused laser beam},
journal = {Materials Transactions},
year = 2007,
}
@article{CTT100553243,
author = {熊井真次},
title = {高速双ロールキャスタにより作製した6022アルミニウム合金板の内部割れと鋳造条件},
journal = {軽金属},
year = 2007,
}
@article{CTT100553239,
author = {SHINJI KUMAI},
title = {High-speed twin-rollcasting of Al-Mg-Si alloys},
journal = {Int. J. Microstructure and Mechanical Properties},
year = 2007,
}
@article{CTT100639910,
author = {SHINJI KUMAI},
title = {High-speed twin-roll casting of Al-Mg-Si alloy},
journal = {International Journal of Microstructure and Materials Properties},
year = 2007,
}
@article{CTT100526051,
author = {T.Haga and M.Ikawa and H.Watari and S.Kumai},
title = {High speed twin roll casting of recycled Al-3Si-0.6Mg strip},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2007,
}
@article{CTT100639911,
author = {SHINJI KUMAI},
title = {Casting of Al-Si hypereutectic aluminum alloy strip using an unequal diameter twin roll caster},
journal = {Journal of Materials Processing and Technology},
year = 2007,
}
@article{CTT100526050,
author = {H.Sakaguchi and T.Haga and H.Watari and S.Kumai},
title = {High speed twin roll casting of 6016 aluminum alloy strip},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2007,
}
@article{CTT100567286,
author = {Mitsuhiro Watanabe and SHINJI KUMAI and Tomokatsu Aizawa},
title = {Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap Joints},
journal = {Materials Science Frorum},
year = 2006,
}
@article{CTT100639912,
author = {SHINJI KUMAI},
title = {Semisolid casting of aluminum alloy strip and its properties},
journal = {Solid State Phonomena},
year = 2006,
}
@article{CTT100526049,
author = {K-J.Lee and S.Kumai},
title = {Characterization of Intermetallic Compound Layer Formed at the Weld Interface of the Defocused Laser Welded Low Carbon Steel/6111 Aluminum Alloy Lap Joint},
journal = {Materials Transactions},
year = 2006,
}
@article{CTT100526048,
author = {Y.Yamaguchi and S.Miyazaki and S.Kumai and A.Sato},
title = {Strengthening of a FeMnSi-based Shape Memory Alloy by Dispersion of χ-phase Domains},
journal = {Philosophical Magazine},
year = 2006,
}
@article{CTT100526047,
author = {M.Taniguchi and K.Morizumi and S.Miyazaki and S.Kumai and A.Sato},
title = {Dislocation Motion on Octahedral and Cube Planes in Fe3Ge Polycrystals},
journal = {Philosophical Magazine},
year = 2006,
}
@article{CTT100526045,
author = {Y.Watanabe and M.Kurahashi and I-S Kim and S.Miyazaki and S.Kumai and A.Sato and S.Tanaka},
title = {Fiber-Reinforced Functionally Graded Materials Fabricated by a Centrifugal in-situ Method from Al-Cu-Fe Ternary Alloy},
journal = {Composites Part A},
year = 2006,
}
@article{CTT100526044,
author = {T.Haga and M.Ikawa and H.Watari and S.Kumai},
title = {High speed twin roll casting of 6016 strip},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2006,
}
@article{CTT100526043,
author = {T.Haga and H.Watari and S.Kumai},
title = {High speed roll casting of Mg alloy strip by a vertical twin roll caster},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2006,
}
@article{CTT100526042,
author = {T.Haga and H.Sakaguchi and H.Inui and H.Watari and S.Kumai},
title = {Aluminum alloy semisolid strip casting using an uneqal diameter twin roll caster},
journal = {Journal of Achievements in Materials and Manufacturing Engineering},
year = 2006,
}
@article{CTT100526041,
author = {米原牧子 and 熊井真次 and 磯野宏秋 and 杉林俊雄 and 井形直弘},
title = {5052アルミニウム合金板材の陽極酸化処理表面における光沢度と表面色に及ぼす表面粗さの影響},
journal = {軽金属},
year = 2006,
}
@article{CTT100526040,
author = {熊井真次 and 小林慶},
title = {AC4CHアルミニウム合金レオキャスト材およびスクイズキャスト材の引裂靱性},
journal = {軽金属},
year = 2006,
}
@article{CTT100526037,
author = {S.Kumai},
title = {Tear Toughness Evaluation of High-Quality Squeeze-Cast and Rheocast Aluminum Alloy Castings},
journal = {Materials Science Forum},
year = 2006,
}
@article{CTT100526036,
author = {K-J.Lee and S.Kumai and N.Ishikawa and K.Furuya},
title = {Interfacial Microstructure of A6111/Steel Lap Joint Fabrication by Defocused Laser Beam Welding},
journal = {Materials Science Forum},
year = 2006,
}
@article{CTT100526035,
author = {M.Watanabe and S.Kumai and T.Aizawa},
title = {Interfacial Microstructure of Magnetic Pressure Seam Welded Al-Fe, Al-Ni and Al-Cu Lap joints},
journal = {Materials Science Forum},
year = 2006,
}
@article{CTT100526034,
author = {K.Suzuki and S.Kumai and K.Tokuda and T.Miyazaki and A.Ishihara and Y.Nagata and T.Haga},
title = {Solidification Structure and Casting Defect in a High-Speed Twin-Roll Cast A6022 Aluminum Alloy With Various Fe Contests},
journal = {Materials Science Forum},
year = 2006,
}
@article{CTT100526033,
author = {K.Tokuda and S.Kumai and A.Ishihara and K.Suzuki},
title = {Influence of Iron Content and Solidification Rate on Mechanical Properties of 6022 Base Alloys},
journal = {Materials Science Forum},
year = 2006,
}
@article{CTT100406832,
author = {T. Haga and M. Ikawa and H. Watari and K. Suzuki and S. Kumai},
title = {High-Speed Twin Roll Casting of Thin Aluminum Alloy Strips Containing Fe Impurities},
journal = {Materials Transactions},
year = 2005,
}
@article{CTT100406831,
author = {K. Suzuki and S. Kumai and Y. Saito and T. Haga},
title = {High-Speed Twin-Roll Strip Casting of Al-Mg-Si Alloys with High Iron Content},
journal = {Materials Transactions},
year = 2005,
}
@article{CTT100406681,
author = {O. Umezawa and M. Nakamoto and Y. Osawa and K. Suzuki and S. Kumai},
title = {Microstructural Refinement of Hyper-Eutectic Al-Si-Fe-Mn Cast Alloys to Produce a Recyclable Wrought Material},
journal = {Materials Transactions},
year = 2005,
}
@article{CTT100406680,
author = {K. J. Lee and S. Kumai and T. Arai},
title = {Interfacial Microstructure and Strength of Steel to Aluminum Alloy Lap Joints Welded by a Defocused Laser Beam},
journal = {Materials Transactions},
year = 2005,
}
@article{CTT100406679,
author = {S. Miyazaki and A. Kawachi and S. Kumai and A. Sato},
title = {Plastic deformation of hardly deformable Al13Fe4 particles embedded in an Al-Al13Fe4 dual phase alloy},
journal = {Materials Science and Engineering A},
year = 2005,
}
@article{CTT100406676,
author = {S. Miyazaki and S. Kumai and A. Sato},
title = {Plastic deformation of Al-Cu-Fe quasicrystals embedded in Al2Cu at low temperatures},
journal = {Materials Science and Engineering A},
year = 2005,
}
@article{CTT100406675,
author = {熊井 真次 and 小林 慶 and 朱 洪 and 鈴木 健太 and 羽賀 俊雄},
title = {真空ダイカストならびに高速双ロールキャストしたアルミニウム合金の組織と引裂靱性},
journal = {軽金属},
year = 2005,
}
@article{CTT100406674,
author = {熊井 真次 and 二木 秀幸 and 朱 洪},
title = {摩擦撹拌接合した6N01アルミニウム合金継手の引裂靱性評価},
journal = {軽金属},
year = 2005,
}
@article{CTT100503361,
author = {熊井真次},
title = {アルミニウム合金ダイカストの破壊特性と靭性評価},
journal = {日本鋳造工学会第145回全国講演大会講演概要集},
year = 2004,
}
@article{CTT100504406,
author = {Hon Zhu and Shinji Kumai and toshikazu tanaak and Akikazu Sato},
title = {Tear Toughness Evaluation of a Permanent Mold Cast A356 Aluminum Alloy Using a Small-Size Specimen },
journal = {Materials Transactions},
year = 2004,
}
@article{CTT100504403,
author = {Toshio Haga and Masaaki Ikawa and Shinji Kumai},
title = {High speed twin roll caster for aluminum alloy thin strips},
journal = {Trans. Mater. Res. Soc. Jpn.},
year = 2004,
}
@article{CTT100504400,
author = {Shinji Kumai and Kenta Suzuki and Yuichi Saito and Toshio Haga},
title = {Significance of Rapidly Solidified Aluminum Alloy Strips for High Quality Recycling},
journal = {Trans. Mater. Res. Soc. Jpn.},
year = 2004,
}
@article{CTT100504395,
author = {Kenta Suzuki and Shinji Kumai and Yuichi Saito and Akikazu Sato and Toshio Haga},
title = {Refined Solidification Structure and Improved Formability of A356 Aluminum Alloy Plate Produced using a High-Speed Twin-Roll Strip Caster},
journal = {Materials Transactions},
year = 2004,
}
@article{CTT100504389,
author = {S. W. Han and S. W. Kim and Shinji Kumai},
title = {Effects of solidification structure on tear resistanace of Al-7%Si-0.4%Mg cast alloys},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = 2004,
}
@article{CTT100504383,
author = {Eiji Tada and Kazuhiko Noda and Shinji Kumai and Tooru Tsuru},
title = {Monitoring of corrosion fatigue cracking using harmonic analysis of current responses induced by cyclic stressing},
journal = {Corrosion Science},
year = 2004,
}
@article{CTT100504365,
author = {Takashi Arai and K. J. Lee and Shinji Kumai and Akikazu Sato and Tomokatsu Aizawa},
title = {Microstructure and mechanical properties of the magnetic pressure seam welded SPCC/6111-T4 plates},
journal = {Aluminum Alloys, Proc. of ICAA-9, Brisbane},
year = 2004,
}
@article{CTT100504351,
author = {Kenta Suzuki and Shinji Kumai and Hiromasa Sato and K. J. Lee and Takeshi Ookawa and Akikazu Sato},
title = {Microstructure in friction stir welded SPCC/6022 aluminum alloy joints},
journal = {Aluminum alloys, Proc. of ICAA-9, Brisbane},
year = 2004,
}
@article{CTT100504347,
author = {Hon Zhu and Shinji Kumai and Akikazu Sato},
title = {Teat toughness evaluation of aluminum alloy castings using a small-size specimen},
journal = {Aluminum alloys, Proc. of ICAA-9, Brisbane},
year = 2004,
}
@article{CTT100504346,
author = {Shinji Kumai and Kenta Suzuki and yuichi saito and akikazu Sato and toshio Haga},
title = {Possibility of Rapidly solidified Thin Strips Produced by a Twin Roll Caster for New Alloy Development and High-grade Recycling of Widely-used Conventional Alloys},
journal = {Aluminum Alloys, Proc. of ICAA-9, Brisbane},
year = 2004,
}
@article{CTT100504341,
author = {乾 秀喜 and 羽賀 俊雄 and 井川 雅章 and 熊井 真次 and 渡利 久規},
title = {アルミニウム合金用異径双ロールキャスターの開発},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504339,
author = {井川 雅章 and 羽賀 俊雄 and 大濱 徳也 and 出口 要 and 熊井 真次 and 渡利 久規},
title = {アルミニウム合金用高速双ロールキャスターの開発},
journal = {軽金属学会第107回秋期大会講演概要},
year = 2004,
}
@article{CTT100504338,
author = {新井 貴 and 李 光鎮 and 熊井 真次 and 佐藤 彰一 and 相沢 友勝},
title = {電磁シーム接合したSPCC/6111-T4接合界面組織の透過電子顕微鏡観察},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504335,
author = {李 光鎮 and 新井 貴 and 熊井 真次 and 佐藤 彰一},
title = {透過電子顕微鏡によるSPCC/アルミニウム合金レーザ接合材の接合界面観察},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504333,
author = {小林 慶 and 朱 洪 and 熊井 真次 and 佐藤 彰一},
title = {AC4CH合金レオキャスト材およびスクイズキャスト材の引裂靭性に及ぼす熱処理の影響},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504330,
author = {大川 武士 and 李 光鎮 and 鈴木 健太 and 熊井 真次 and 佐藤 彰一},
title = {摩擦撹拌を利用したFe/Al異材重ね合わせ接合材のミクロ組織と力学的特性},
journal = {軽金属学会第107回秋期大会講演概要},
year = 2004,
}
@article{CTT100504325,
author = {二木 秀幸 and 小林 慶 and 朱 洪 and 熊井 真次 and 佐藤 彰一},
title = {摩擦撹拌接合した6N01アルミニウム合金の引裂靭性評価},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504321,
author = {河野 卓 and 鈴木 健太 and 小林 慶 and 熊井 真次 and 佐藤 彰一 and 羽賀 俊雄},
title = {高速双ロールキャストによるダイカスト用アルミニウム合金の組織微細化},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504317,
author = {石原 暁子 and 鈴木 健太 and 熊井 真次 and 佐藤 彰一 and 羽賀 俊雄},
title = {6022合金高速双ロールキャスト材中央部欠陥に及ぼす鋳造条件の影響},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504311,
author = {井川 雅章 and 羽賀 俊雄 and 大濱 徳也 and 出口 要 and 熊井 真次 and 渡利 久規},
title = {6111アルミニウム合金の高速双ロールキャスティング},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504306,
author = {羽賀 俊雄 and 井川 雅章 and 乾 秀喜 and 熊井 真次 and 渡利 久規},
title = {各種アルミニウム合金用高速双ロールキャスティング},
journal = {軽金属学会第107回秋期講演大会概要},
year = 2004,
}
@article{CTT100504296,
author = {李 光鎮 and 熊井 真次 and 新井 貴 and 佐藤 彰一},
title = {SPCC/6000系アルミニウム合金レーザ接合材の力学的性質に及ぼす熱処理の影響},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504247,
author = {Osamu Umezawa and H.Oya and T. Yoshioka and Shinji Kumai and C. Nishimura},
title = {Development of civic model on materials technology for recycling-based society},
journal = {Trans. Mater. Res. soc. Jpn.},
year = 2004,
}
@article{CTT100504241,
author = {小林 慶 and 朱 洪 and 熊井 真次 and 佐藤 彰一},
title = {高速双ロールキャストしたダイカスト用アルミニウム合金の引裂靭性評価},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504238,
author = {河野 卓 and 斎藤 祐一 and 熊井 真次 and 佐藤 彰一 and 羽賀 俊雄},
title = {高速双ロールキャストしたダイカスト用アルミニウム合金のミクロ組織と力学的性質},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504234,
author = {羽賀 俊雄 and 井川 雅章 and 中井 大輔 and 加納 潤也 and 熊井 真次 and 鈴木 健太},
title = {高速ロールキャスティングによるFeを添加したAC4C合金板の作製},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504233,
author = {羽賀 俊雄 and 宇野 生男 and 井川 雅章 and 熊井 真次 and 鈴木 健太},
title = {凝固距離が長い異径双ロールキャスターによるアルミニウム合金板の作製},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504227,
author = {羽賀 俊雄 and 加藤 栄冶 and 井川 雅章 and 熊井 真次 and 鈴木 健太},
title = {異径双ロールキャスターによるアルミニウム合金板の作製},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504226,
author = {鈴木 健太 and 熊井 真次 and 斎藤 祐一 and 佐藤 彰一 and 羽賀 俊雄},
title = {高速双ロールキャストした6022アルミニウム合金薄板の組織と力学的特性に及ぼすFeの影響},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100504221,
author = {朱 洪 and 小林 慶 and 熊井 真次 and 佐藤 彰一},
title = {AC4CH合金半凝固鋳造材およびスクイズ鋳造材の引裂靭性},
journal = {軽金属学会第106回春期講演大会概要},
year = 2004,
}
@article{CTT100503948,
author = {Shinji Kumai and Toshikazu Tanaka and Hon Zhu and Akikazu Sato},
title = {Tear Toughness of Permanent Mold Cast and DC Cast A356 Aluminum Alloys},
journal = {Materials Transactions},
year = 2004,
}
@article{CTT100503396,
author = {李 光鎮 and 熊井 真次 and 新井 貴 and 佐藤 彰一},
title = {SPCC/6000系アルミニウム合金レーザ接合材の力学的性質に及ぼす熱処理の影響},
journal = {軽金属学会第106回春期大会講演概要},
year = 2004,
}
@article{CTT100503378,
author = {井川 雅章 and 羽賀 俊雄 and 乾 秀喜 and 熊井 真次 and 渡利 久規},
title = {異径双ロールキャスターを用いたアルミニウム合金板の製造},
journal = {日本鋳造工学会第145回全国講演大会講演概要},
year = 2004,
}
@article{CTT100503376,
author = {井川 雅章 and 羽賀 俊雄 and 大浜 徳也 and 山口 要 and 熊井 真次},
title = {6000系合金の高速双ロールキャスティング},
journal = {日本鋳造工学会第145回全国講演大会講演概要},
year = 2004,
}
@article{CTT100503375,
author = {小林 慶 and 朱 洪 and 熊井 真次},
title = {各種先端鋳造法により作製したAC4CH合金鋳物のミクロ組織と引裂靭性},
journal = {日本鋳造工学会第145会全国講演大会講演概要},
year = 2004,
}
@article{CTT100503367,
author = {鈴木健太 and 熊井真次 and 羽賀俊雄},
title = {高速双ロールキャストしたアルミニウム合金の急冷凝固組織と力学的特性},
journal = {日本鋳造工学会第145回全国講演大会講演概要},
year = 2004,
}
@article{CTT100539827,
author = {Shinji Muraishi and Shinji Kumai and Akikazu Sato},
title = {Competitive nucleation and growth of {111} Ω with {001} GP zones and θ' in a stress-aged Al-Cu-Mg-Ag alloy},
journal = {Materials Transactions},
year = 2004,
}
@article{CTT100489763,
author = {熊井真次 and 朱 洪},
title = {楽器の疲労-プロの演奏家が25年間使用したアルミニウム合金製打楽器の損傷解析},
journal = {まてりあ},
year = 2003,
}
@article{CTT100504370,
author = {熊井 真次 and 若菜 剛介 and 山脇 正人 and 李 光鎮 and 佐藤 彰一},
title = {摩擦撹拌接合した6061アルミニウム合金薄板の組織と力学的性質},
journal = {軽金属},
year = 2003,
}
@article{CTT100485523,
author = {熊井真次 and 今井達也 and 若菜剛介 and 加藤雅治 and 佐藤彰一},
title = {Cu-15mass%Cr複相合金圧延材における引張特性の異方性},
journal = {日本金属学会誌},
year = 2003,
}
@article{CTT100504374,
author = {李 光鎮 and 熊井 真次 and 佐藤 彰一},
title = {成形用潤滑樹脂をプレコートした6061アルミニウム合金板のレーザ接合材のミクロ組織と力学的性質},
journal = {軽金属},
year = 2003,
}
@article{CTT100485526,
author = {Y. Yoneyama and K. Mizoguchi and S. Kumai and A. Sato and M. Kiritani},
title = {Plastic deformation of Al13Fe4 by high-speed compression},
journal = {Materials Science and Engineering A},
year = 2003,
}
@article{CTT100485529,
author = {熊井真次},
title = {一期一会と'CCイングッシュ’プレゼンテーションの秘訣},
journal = {軽金属},
year = 2003,
}
@article{CTT100486873,
author = {朱 洪 and 熊井真次 and 田中寿和 and 佐藤彰一},
title = {小型試験片を用いたAC4CH合金金型鋳造材の引裂靭性評価},
journal = {軽金属学会第104回春期大会講演概要},
year = 2003,
}
@article{CTT100485524,
author = {熊井真次 and 若菜剛介 and 尾中 晋 and 加藤雅治 and 佐藤彰一},
title = {Cu-15mass%Cr複相合金圧延材におけるヤング率の異方性},
journal = {日本金属学会誌},
year = 2003,
}
@article{CTT100485525,
author = {K. Yamamoto and S. Miyazaki and S. Kumai and A. Sato},
title = {Strong magnetization by antiphase-boundary tubes in a cyclically deformed Fe-35at%Al alloy},
journal = {Philosophical Magazine A},
year = 2003,
}
@article{CTT100486874,
author = {熊井真次 and 田中寿和 and 下条雅幸 and 佐藤彰一 and 津島健次 and 柴田公博},
title = {アルミニウム合金ダイカスト切下欠き材の高速引張破壊},
journal = {軽金属学会第104回春期大会講演概要},
year = 2003,
}
@article{CTT100486888,
author = {Toshio Haga and M. Ikama and Shinji Kumai},
title = {High speed twin roll caster for aluminum alloy thin strips},
journal = {IUMRS-ICAM 2003 Abstracts 2},
year = 2003,
}
@article{CTT100486889,
author = {O. Umezawa and H. Ohya and T. yoshioka and Shinji Kumai and C. Nishimura},
title = {Development of civic model on materials technology for recycling-based society},
journal = {IUMRS-ICAM 2003 Abstracts 2},
year = 2003,
}
@article{CTT100486884,
author = {新井 貴 and 李 光鎮 and 熊井真次 and 佐藤彰一 and 相沢友勝},
title = {電磁シーム溶接したSPCC/A6111-T4接合材の界面組織と力学的特性},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486885,
author = {李 光鎮 and 新井 貴 and 熊井真次 and 佐藤彰一 and 松田富士子 and 齋藤茂樹 and 横森保彦 and 清宮義博},
title = {レーザ溶接したSPCC/A6111-T4溶接材の界面組織と力学的性質},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486887,
author = {Shinji Kumai and Kenta Suzuki and Yuichi Saito and Toshio Haga},
title = {Significance of rapidly solidified aluminum alloy strips for high quality recycling},
journal = {IUMRS-ICAM 2003 Abstracts 2},
year = 2003,
}
@article{CTT100486875,
author = {李 光鎮 and 新井 貴 and 熊井真次 and 佐藤彰一 and 松田富士子 and 齋藤茂樹 and 横森保彦},
title = {レーザ溶接したSPCC/A6111-T4接合材の界面組織},
journal = {軽金属学会第104回春期大会講演概要},
year = 2003,
}
@article{CTT100486876,
author = {宮崎信弥 and 熊井真次 and 佐藤彰一},
title = {低温変形したAl-Cu-Fe正20面体準結晶の組織観察},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486877,
author = {羽賀俊雄 and 熊井真次},
title = {アルミニウム合金のリサイクルを目指した高速双ロールキャスター},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486878,
author = {熊井真次 and 羽賀俊雄},
title = {高品位リサイクルを目指した高速双ロールキャスト法によるアルミニウム合金薄板の直接製造},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486879,
author = {大西宏道 and 山口由紀子 and 熊井真次 and 佐藤彰一},
title = {0.5Tm付近で変形したFe-Mn-Si基形状記憶合金のミクロ組織と形状記憶特性},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486880,
author = {山口由紀子 and 大西宏道 and 熊井真次 and 佐藤彰一},
title = {V, Nの添加ならびに高速変形によるFe-Mn-Si基形状記憶合金の高強度化},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486881,
author = {谷口 真 and 和泉 貴 and 熊井真次 and 佐藤彰一},
title = {Fe3Geの塑性変形を担うせん断系の同定},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486882,
author = {鈴木健太 and 熊井真次 and 佐藤彰一 and 齋藤佑一 and 羽賀俊雄},
title = {高速双ロールキャスターにより作製したAC4C合金薄板の組織と曲げ加工性},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100486883,
author = {熊井真次 and 齋藤佑一 and 鈴木健太 and 佐藤彰一 and 羽賀俊雄},
title = {高速双ロールキャストした6063アルミニウム合金薄板のミクロ組織と力学的特性に及ぼすFe含有量の影響},
journal = {日本金属学会講演概要},
year = 2003,
}
@article{CTT100469007,
author = {Naoki Yoneyama and Shinji Kumai and Masao Komatsu and Michio Kiritanai},
title = {Microstructures in a Fe Based ShapeMemory Alloy and Al Based Dual Phase Crystals after High Speed Deformation},
journal = {Radiation Effects and Defects in Solids},
year = 2002,
}
@article{CTT100477601,
author = {李 光鎮 and 熊井 真次 and 佐藤 彰一},
title = {アルミニウム合金プレコ-ト材のレーザ溶接と引張特性},
journal = {第46回日本学術会議材料研究連合講演会講演論文集},
year = 2002,
}
@article{CTT100469011,
author = {M. Niinomi and T.Akahori and K. Fukunaga and S. Kumai and M. Kanno},
title = {Toughness level of 6061 aluminum alloy added with Mn instead of Cr},
journal = {Materials Science Forum},
year = 2002,
}
@article{CTT100469010,
author = {M. Niinomi and T. Akahori and K. Fukunaga and S. Kumai and M. Kanno},
title = {Possibility of Substituting Mn for Cr in 6061 Aluminum Alloy from the Point of View of toughness and Tensile Properties},
journal = {Light Metals 2002},
year = 2002,
}
@article{CTT100469005,
author = {Shinji Kumai and Sang-Won Han and Akikazu Sato},
title = {Fatigue and Fracture of Al-Si-Mg Cast Alloys Produced by Conventional and Semi-Liquid Processes},
journal = {Materials Science Forum},
year = 2002,
}
@article{CTT100477602,
author = {熊井 真次 and 田中 寿和 and 佐藤 彰一},
title = {アルミニウム合金鋳物・ダイカストの引裂靭性評価},
journal = {第46回日本学術会議材料研究連合講演会講演論文集},
year = 2002,
}
@article{CTT100477603,
author = {熊井 真次 and 田中 寿和 and 佐藤 彰一},
title = {Al-Mg-Si系合金鋳造材の引裂靭性評価},
journal = {軽金属学会第102回春期大会講演概要},
year = 2002,
}
@article{CTT100477604,
author = {李 光鎮 and 熊井 真次 and 佐藤 彰一},
title = {レーザ溶接したアルミニウム合金プレコ-ト材の組織と機械的性質},
journal = {軽金属学会第102回春期大会講演概要},
year = 2002,
}
@article{CTT100477605,
author = {李 光鎮 and 新井 貴 and 熊井 真次 and 佐藤 彰一 and 松田 富士子 and 齋藤 茂樹 and 武士 正美},
title = {レーザ溶接したFe/Al接合材のミクロ組織と力学的性質},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100477606,
author = {若菜 剛介 and 熊井 真次 and 佐藤 彰一},
title = {摩擦撹拌接合した6061アルミニウム合金薄板の組織と力学的性質},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100477607,
author = {田中 寿和 and 熊井 真次 and 佐藤 彰一 and 下条 雅幸 and 津島 健次 and 柴田 公博},
title = {交流電位差法を用いたアルミニウム合金ダイカスト切欠き材の破壊解析},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100477608,
author = {安井 健志 and 佐藤 宏昌 and 熊井 真次 and 佐藤 彰一},
title = {Al-Cu-Mg-Ag合金におけるΩ相の高温安定性に及ぼす外力付加の効果},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100477609,
author = {朱 洪 and 田中 寿和 and 熊井 真次 and 佐藤 彰一},
title = {AC4CHアルミニウム合金金型鋳造材の引裂靭性に及ぼす試験片厚さの影響},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100477600,
author = {熊井 真次 and 奥津 正人 and 米山 夏樹 and 佐藤 彰一},
title = {2024アルミニウム合金423K時効材における初期急速硬化の起源},
journal = {軽金属},
year = 2002,
}
@article{CTT100477599,
author = {Sang-Won Han and Koji Katsumata and Shinji Kumai and Akikazu Sato},
title = {Effects of solidification structure and aging condition on cyclic stress-strain response in Al-7%Si-0.4%Mg cast alloys},
journal = {Materials Science and Engineering A},
year = 2002,
}
@article{CTT100477610,
author = {齋藤 祐一 and 熊井 真次 and 佐藤 彰一 and 羽賀 俊雄},
title = {高速ロールキャスティングしたAC4Cアルミニウム合金のミクロ組織},
journal = {軽金属学会第103回秋期大会講演概要},
year = 2002,
}
@article{CTT100485528,
author = {N. Yoneyama and S. Kumai and A. Sato and M. Komatsu and M. Kiritani},
title = {MIcrostructures in an Fe based shape memory alloy and al based dual phase crystals after high speed deformation},
journal = {Radiation Effects and Defects in Solids},
year = 2002,
}
@article{CTT100485527,
author = {N. Yoneyama and K. Mizoguchi and S. Kumai and A. Sato and M. Kiritani},
title = {Structural refinement and strengthening of an Fe-Mn-Si-Cr-Ni shape memory alloy by high-speed rolling},
journal = {Materials Science and Engineering A},
year = 2002,
}
@article{CTT100538366,
author = {Shinji Muraishi and Shinji Kumai and Akikazu Sato},
title = {Stress-oriented nucleation of Ω-phase plates in an Al-Cu-Mg-Ag alloy},
journal = {Philosophical Magazine A},
year = 2002,
}
@article{CTT100408403,
author = {Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Effects of Solidification Structure on Short Fatigue Crack Growth in Al-7%Si-0.4%Mg Alloy Castings},
journal = {Materials Science and Engineering A},
year = 2002,
}
@article{CTT100477598,
author = {Shinji Muraishi and Nobutaka Niwa and Atsushi Maekawa and Shinji Kumai and Akikazu Sato},
title = {Strengthening of Al-Cu single crystals by stress-oriented Guinier-Preston zones},
journal = {Philosophical Magazine A},
year = 2002,
}
@article{CTT100469009,
author = {Shinji Muraishi and Shinji Kumai and Akikazu Sato},
title = {Yield Shear Stress Anisotropy of Al-Cu Single Crystals Containing Single Variant GP Zones},
journal = {Materials Science Forum},
year = 2002,
}
@article{CTT100451635,
author = {米山夏樹 and 春田耕平 and 熊井真次 and 佐藤彰一},
title = {Ni3Ge単結晶の拘束圧縮変形},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100451636,
author = {米山夏樹 and 瀬戸田啓志 and 熊井真次 and 佐藤彰一 and 小松正雄 and 桐谷道雄},
title = {Fe-Mn-Si系形状記憶合金の高速変形と組織の微細化},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100451637,
author = {溝口賢一郎 and 米山夏樹 and 熊井真次 and 佐藤彰一},
title = {Al-Al3Fe複相材における高速変形組織の観察},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100451638,
author = {倉橋政人 and 渡辺義見 and 宮崎信弥 and 熊井真次 and 佐藤彰一},
title = {遠心鋳造を行なった3元系Al-Cu-Fe合金の組織},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100451838,
author = {Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Origin of Improved Ductility in Semi-Liquid Die-Cast Al-7%Si-0.4%Mg Alloys},
journal = {Materials Transactions},
year = 2001,
}
@article{CTT100452392,
author = {加藤雅治 and 熊井真次},
title = {転位を通して材料の力学的性質を理解する},
journal = {第5回軽金属フォーラム 21世紀にはばたくアルミニウム その特異性を考える},
year = 2001,
}
@article{CTT100452394,
author = {Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Short and Long Fatigue Crack Growth Behavior in Al-7%Si-0.4%Mg Alloy Castings},
journal = {LiMAT-2001},
year = 2001,
}
@article{CTT100452395,
author = {Shinji Kumai and Toshikazu Tanaka and Sang-Won Han and Akikazu Sato and Sug-Won Kim},
title = {Tensile Ductility and Tear Resistance of A356 Aluminum alloys Fabricated by Conventional and Semi-Liquid Casting Process},
journal = {LiMAT-2001},
year = 2001,
}
@article{CTT100452397,
author = {村石信二 and 熊井真次 and 佐藤彰一},
title = {Al-Cu-Mg-Ag合金の初期時効組織に及ぼす外力の効果},
journal = {軽金属学会第100回春期大会講演概要},
year = 2001,
}
@article{CTT100469004,
author = {Shinji Kumai and Toshikazu Tanaka and Sang-Won Han and Akikazu Sato},
title = {Tensile Ductility and Tear Resistance of A356 Aluminum Alloy Fabricated by conventional and Semi-Liquid Casting Process},
journal = {LiMAT 2001},
year = 2001,
}
@article{CTT100451631,
author = {村石信二 and 前川 淳 and 丹羽信崇 and 熊井真次 and 佐藤彰一},
title = {Al-Cu系合金単結晶の塑性変形に及ぼす析出相配列効果の影響},
journal = {軽金属学会第100回春期大会講演概要},
year = 2001,
}
@article{CTT100451632,
author = {熊井真次 and 奥津正人 and 佐藤彰一},
title = {150℃で時効したAl-Cu-Mg合金の応力‐ひずみ応答},
journal = {軽金属学会第100回春期大会講演概要},
year = 2001,
}
@article{CTT100451633,
author = {若菜剛介 and 今井達也 and 熊井真次 and 佐藤彰一},
title = {Cu-Cr複相合金圧延材におけるヤング率の異方性},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100451634,
author = {熊井真次 and 今井達也 and 若菜剛介 and 佐藤彰一},
title = {Cu-Cr複相合金圧延材の引張特性の異方性},
journal = {日本金属学会第129回大会講演概要},
year = 2001,
}
@article{CTT100454266,
author = {田中寿和 and 熊井真次 and 佐藤彰一},
title = {引裂試験によるAl-Si-Mg系合金鋳造材の靭性評価},
journal = {日本鋳造工学会第139回全国講演大会講演概要集},
year = 2001,
}
@article{CTT100469003,
author = {Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Short and Long Fatigue Crack Growth Behavior in Semi-Liquid Die-Casting Processed Al-Si-Mg Alloys},
journal = {LiMAT 2001},
year = 2001,
}
@article{CTT100537822,
author = {Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure},
journal = {Materials Science and Engineering A},
year = 2001,
}
@article{CTT100452396,
author = {Shinji Muraishi and Shinji Kumai and Akikazu Sato},
title = {Stress-Assisted Nucleation of Omega Precipitate in Al-Cu-Mg-Ag Alloys},
journal = {LiMAT-2001},
year = 2001,
}
@article{CTT100469008,
author = {Shinji Muraishi and Shinji Kumai and Akikazu sato},
title = {Stress-Assisted Nucleation of Ω precipitate in Al-Cu-Mg-Ag Alloys},
journal = {LiMAT 2001},
year = 2001,
}
@article{CTT100429598,
author = {Naoki Oiwa and Tatsuya Imai and Shinji Kumai and Akikazu Sato and Takashi Matsuo},
title = {Effects of Extrusion Temperature on Creep Properties of Spray-Formed and Hot-Extruded Al-8.3mass%Fe Alloys},
journal = {Materials Transactions,JIM},
year = 2000,
}
@article{CTT100419580,
author = {T. Murakumo and Shinji Kumai and Akikazu Sato},
title = {Effects of Mechanocal Constraint on the Strength of Ni3Ge Single Crystals},
journal = {Materials Transactions,JIM},
year = 2000,
}
@article{CTT100419579,
author = {SHINJI KUMAI},
title = {Heterogeneous Recovery and Precipitation of Z Phase during Long Term Creep Deformation of Modified 9Cr-1Mo Steel},
journal = {TETSU-TO-HAGANE},
year = 2000,
}
@article{CTT100419578,
author = {Ken Yamashita and Chihiro watanabe and Shinji Kumai and Masaharu Kato and Akikazu sato and Yoshimi Watanabe},
title = {Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al-Al3Ti of fynctionally Graded Material},
journal = {Materials Transactions,JIM},
year = 2000,
}
@article{CTT100452393,
author = {熊井真次 and 菅野幹宏},
title = {循環性に優れた汎用アルミニウム合金創製に向けて},
journal = {エコデザイン2000ジャパンシンポジウム論文集},
year = 2000,
}
@article{CTT100429599,
author = {K. Yamashita and I. Fujimoto and T. Murakumo and Shinji Kumai and Akikazu Sato},
title = {Observation of Glide Dislocations in DO20 Ordered Al3Ni},
journal = {Philosophical Magazine A},
year = 2000,
}
@article{CTT100433135,
author = {Shinji Kumai and Shoji Aoki and Sang-Won Han and Akikazu Sato},
title = {Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack growth in Cast and HIPed AC4CH Alloys},
journal = {Materials Transactions,JIM},
year = 2000,
}
@article{CTT100408405,
author = {S.W.Kim and Y.C.Kang and D.K.Kim and Shinji Kumai},
title = {Microstructural and Mechanical Characteristics of A356 Alloy Cast by Semi-Solid Squeeze Process},
journal = {J.of Korean Foundrymen's Society},
year = 2000,
}
@article{CTT100408404,
author = {Shinji Kumai and Shoji Aoki and Sang-Won Han and Akikazu Sato},
title = {Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack Growth in Cast and HIPed AC4CH Alloys},
journal = {Materials Transactions,JIM},
year = 1999,
}
@article{CTT100408411,
author = {多田 英司 and 野田 和彦 and 熊井 真次 and 水流 徹},
title = {繰返しひずみ‐電流応答解析による腐食疲労機構の検討},
journal = {日本金属学会誌},
year = 1999,
}
@article{CTT100408413,
author = {多田英司 and 野田和彦 and 熊井真次 and 水流 徹},
title = {分極電流の高調波解析による純鉄の腐食疲労き裂の検出},
journal = {日本金属学会誌},
year = 1998,
}
@article{CTT100408412,
author = {Ken Yamashita and Ichiro Fujimoto and Shinji Kumai and Akikazu Sato},
title = {Plastic Deformation of DO22 Ordered Al3Ti in a Centrifugally Cast Al-Al3Ti Composite},
journal = {Materials Transactions,JIM},
year = 1998,
}
@article{CTT100499361,
author = {T. Fujii and H. Shintate and H. Yaguchi and H. Mitani and A. Inada and K. Shinkai and S. Kumai and M. Kato},
title = {Low Cycle Fatigue of Cu-Fe Alloy Single Crystals Containing Transformable Fe Precipitates},
journal = {ISIJ International},
year = 1997,
}
@article{CTT100413647,
author = {T. Fujii and H. Shintate and H. Yaguchi and H. Mitani and A. Inada and K. Shinkai and S. Kumai and M. Kato},
title = {Deformation Characteristics and Microstructure of a Fatigued Polycrystalline 3003 Aluminum Alloy},
journal = {ISIJ International},
year = 1997,
}
@article{CTT100408417,
author = {Toshiyuki Fujii and Hiroshi Shintate and Hiroshi Yaguchi and Hiroyuki Mitani and Atsushi Inada and Koichi Sshinkai and Shinji Kumai and Masaharu Kato},
title = {Microstructural Development during Fatigue of a Polycrystalline 3003 Aluminum Alloy},
journal = {ISIJ International},
year = 1997,
}
@article{CTT100408416,
author = {Shinji Kumai and Akinori Sekikawa and Akihiko Yoshikawa and Yakichi Higo},
title = {Constant ΔK Fatigue Crack Growth Tests under Programmed Humidity Cycle Conditions - As a Tool to Evaluate the Effect of Humidity on Fatigue Crack Growth of Al-Li Alloys -},
journal = {ISIJ International},
year = 1997,
}
@article{CTT100408415,
author = {Eiji Tada and Kazuhiko Noda and Shinji Kumai and Toru Tsuru},
title = {The Effects of Straining Frequency and Stress Ratio on Polarization Current Responded to Cyclic Strain in a Commercial Iron},
journal = {ISIJ International},
year = 1997,
}
@article{CTT100408414,
author = {多田英司 and 野田和彦 and 熊井真次 and 水流 徹},
title = {ひずみに同期した分極電流による純鉄の腐食疲労過程の解析},
journal = {日本金属学会誌},
year = 1997,
}
@article{CTT100408419,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Effects of Dendrite Cell Size and Particle Distribution on the Near-Threshold Fatigue Crack Growth Behaviour of Cast Al-SiCp Composites},
journal = {Acta METALLURGICA et MATERIALIA},
year = 1996,
}
@article{CTT100408418,
author = {Shinji Kumai and Yakichi Higo},
title = {Effects of delamination on fatigue crack growth retardation after single overloads in 8090 Al-Li alloys},
journal = {Materials Science and Engineering A},
year = 1996,
}
@article{CTT100408421,
author = {熊井真次 and 胡 健群 and 肥後矢吉 and 布村成具},
title = {AC4CHアルミニウム合金鋳造材の疲労き裂伝播に及ぼす凝固組織の影響},
journal = {軽金属},
year = 1995,
}
@article{CTT100408423,
author = {熊井真次 and 胡 健群 and 関川明功 and 肥後矢吉 and 布村成具},
title = {AC4CHアルミニウム合金鋳造材の疲労き裂伝播に及ぼす破面粗さ誘起き裂クロージャーの効果},
journal = {軽金属},
year = 1995,
}
@article{CTT100408420,
author = {胡 健群 and 熊井真次 and 関川明功 and 肥後矢吉 and 布村成具},
title = {SiC粒子強化鋳造用アルミニウム合金複合材料の疲労き裂伝播特性},
journal = {軽金属},
year = 1995,
}
@article{CTT100408425,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Fatigue Crack Growth in SiC-Particulate-Reinforced Cast Aluminium Alloy Composite},
journal = {Transactions of Materials Research Society of Japan},
year = 1994,
}
@article{CTT100408424,
author = {熊井真次 and 胡 健群 and 石倉 誠 and 肥後矢吉 and 布村成具},
title = {SiC粒子強化鋳造アルミニウム合金複合材料の引張特性に及ぼす凝固組織の影響},
journal = {軽金属},
year = 1994,
}
@article{CTT100408426,
author = {Shinji Kumai and Julia E.King and John F.Knott},
title = {Fatigue Crack Growth Behaviour in Molten-Metal Processed SiC Particle-Reinforced Aluminium Alloys},
journal = {Fatigue Fract. Engng Mater. Struct.},
year = 1992,
}
@article{CTT100408431,
author = {S.Nunomura and S.Noguchi and Y.Okamura and S.Kumai and S.Jitsukawa},
title = {Two Micro Fatigue Test Methods for Irradiated Materials},
journal = {Specimen Test Techniques and Their Application to Nuclear Vessel Thermal Annealing and Plant Life Extension, ASTM STP},
year = 1992,
}
@article{CTT100408427,
author = {Shinji Kumai and Kenichi Yoshida and Yakichi Higo and Shigetomo Nunomura},
title = {Effects of the Particle Distribution on Fatigue Crack Growth in Particulate SiC/6061 Aluminium Alloy Composites},
journal = {Int J Fatigue},
year = 1992,
}
@article{CTT100408429,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Hardness Characteristics in Aged Particulate SiC/A356 Cast Aluminium Alloy Composites},
journal = {Scripta METALLURGICA et MATERIALIA},
year = 1992,
}
@article{CTT100408434,
author = {Akihiko Kamio and Shinji Kumai and Hiroyasu Tezuka},
title = {Solidification Structure of Monotectic Alloys},
journal = {Materials Science and Engineering A},
year = 1991,
}
@article{CTT100408433,
author = {Shinji Kumai and Julia E.King and John F.Knott},
title = {Fatigue in a SiC-Particulate-Reinforced Aluminium Alloy Composites},
journal = {Materials Science and Engineering A},
year = 1991,
}
@article{CTT100408436,
author = {Shinji Kumai and Julia E.King and John F.Knott},
title = {Short and Long Fatigue Crack Growth in a SiC Reinforced Aluminium Alloy},
journal = {Fatigue Fract. Engng Mater. Struct.},
year = 1990,
}
@article{CTT100542149,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 末田外洋 and 高橋恒夫},
title = {アルミニウム基合金の偏晶凝固機構},
journal = {日本金属学会誌},
year = 1985,
}
@article{CTT100408439,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 高橋恒夫},
title = {Cu-Pb系偏晶合金の凝固組織制御},
journal = {伸銅技術研究会誌},
year = 1985,
}
@article{CTT100408440,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 小野健二 and 高橋恒夫},
title = {銅基合金の偏晶凝固組織の形成機構},
journal = {日本金属学会誌},
year = 1985,
}
@article{CTT100408459,
author = {Akihiko Kamio and Hiroyasu Tezuka and Shinji Kumai and Tsuneo Takahashi},
title = {Formation Manner of Monotectic Structure in Al-In Alloys Solidified Unidirectionally},
journal = {Trans. JIM},
year = 1984,
}
@article{CTT100408457,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 高橋恒夫},
title = {Al-In偏晶合金の一方向凝固組織},
journal = {日本金属学会誌},
year = 1984,
}
@article{CTT100408460,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 高橋恒夫},
title = {一方向凝固したAl-In合金における偏晶凝固組織の形成機構},
journal = {日本金属学会誌},
year = 1984,
}
@article{CTT100408458,
author = {Akihiko Kamio and Hiroyasu Tezuka and Shinji Kumai and Tsuneo Takahashi},
title = {Unidirectional Solidification Structure of Al-In Monotectic Alloys},
journal = {Trans. JIM},
year = 1984,
}
@article{CTT100408461,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 高橋恒夫},
title = {偏晶系Al-PbおよびAl-Bi合金の凝固組織},
journal = {軽金属},
year = 1983,
}
@article{CTT100408462,
author = {神尾彰彦 and 手塚裕康 and 熊井真次 and 高橋恒夫},
title = {Al-In合金の偏晶凝固組織},
journal = {日本金属学会誌},
year = 1982,
}
@inproceedings{CTT100882016,
author = {Yuji TAKEHARA and Yuki ITO and Thai Ha NGUYEN and Yohei HARADA and Shinji MURAISHI and Shinji KUMAI},
title = {Effect of homogenization heat treatment on elongation anisotropy in cold-rolled and annealed Al-Si alloy sheets fabricated from vertical-type high-speed twinroll cast strips},
booktitle = {},
year = 2022,
}
@inproceedings{CTT100882015,
author = {Shingo KAJIMURA and Seina KUROTATSU and Thai Ha NGUYEN and Yohei HARADA and Shinji MURAISHI and Shinji KUMAI},
title = {Effect of nozzle shape on periodic surface patterns of Al-3 mass% Si alloy strips fabricated by vertical-type high-speed twin-roll casting},
booktitle = {},
year = 2022,
}
@inproceedings{CTT100836098,
author = {丸野瞬 and 吉野路英 and 岩尾祥平 and Nguyen Thai Ha and 原田陽平 and 村石信二 and 熊井真次},
title = {高速双ロール鋳造を用いたAl-高Mn-Si系合金の機械的性質に及ぼす分散粒子の分布状態の影響},
booktitle = {講演概要集},
year = 2020,
}
@inproceedings{CTT100836300,
author = {Maya Okihara and Shinji Muraishi and SHINJI KUMAI},
title = {Welding Interface of MPWed Aluminum Plates with Different Hardness},
booktitle = {Proceedings of 14th International Aluminium Conference (INALCO2019)},
year = 2020,
}
@inproceedings{CTT100834872,
author = {横井湧士 and 原田陽平 and 熊井真次},
title = {FeならびにSi添加したA6022合金における縦型高速双ロールキャスト材の組織と機械的特性},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100834870,
author = {Y. Harada and H. Shinohara and T. Goda and S. Kumai},
title = {Effect of increasing rolling-reduction rate on suppression of elongation anisotropy in cold-rolled and annealed Al-7%Si alloy strip fabricated by vertical-type tandem high-speed twin-roll casting},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100834871,
author = {梅山淳平 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロール鋳造によるA6022/Al-7%Si/A6022 3層クラッド材の作製},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100834873,
author = {宇留野玄暉 and 原田陽平 and 熊井真次},
title = {A356合金板における共晶Si粒子の分散状態と破断伸び異方性に及ぼす高温溶体化処理の影響},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100834869,
author = {T. Ha. Nguyen and R. Song and Y. Harada and S. Muraishi and S. Kumai and S. Maruno and M. Yoshino and S. Iwao},
title = {Microstructure and mechanical properties of high-manganese-containing high-speed twin-roll cast Al-Mn-Si alloy strips and their cold-rolled sheets},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100836375,
author = {熊谷祐太 and 熊井真次 and 渡邉満洋},
title = {Al/Mg電磁圧接材の接合界面組織解析},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100841224,
author = {朴 聖鎭 and 村石 信二 and 原田 陽平 and 熊井 真次},
title = {90%冷間圧延したAA3003アルミニウム合金の粒界3重点の移動による回復挙動},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100836374,
author = {熊谷祐太 and 渡邉満洋 and 熊井真次},
title = {A1050アルミニウム板とAZ31マグネシウム合金板の電磁圧接とその接合界面組織},
booktitle = {軽金属学会第138回春期講演大会講演概要集},
year = 2020,
}
@inproceedings{CTT100834874,
author = {丸野瞬 and 吉野路英 and 岩尾祥平 and Nguyen Thai Ha and 原田陽平 and 村石信二 and 熊井真次},
title = {高速双ロール鋳造を用いたAl-高Mn-Si系合金フィン材の機械的特性},
booktitle = {},
year = 2020,
}
@inproceedings{CTT100836286,
author = {沖原麻耶 and 村石信二 and 熊井真次},
title = {調質の異なる1050アルミニウム板の電磁圧接界面},
booktitle = {軽金属学会第137回秋期講演大会講演概要},
year = 2019,
}
@inproceedings{CTT100836283,
author = {木村慎吾 and 村石信二 and 熊井真次},
title = {Al/CuおよびAl/Niの電磁圧接界面における類似点と相違点},
booktitle = {軽金属学会第137回秋期講演大会講演概要},
year = 2019,
}
@inproceedings{CTT100836295,
author = {Takashi Kambe and Shinji Muraishi and SHINJI KUMAI},
title = {Experimental and Numerical Analysis of MPW and MPF of Al Sheet},
booktitle = {Proceedings of 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@inproceedings{CTT100836296,
author = {Jiedi Li and Shinji Muraishi and SHINJI KUMAI},
title = {Influence of Kinetic Parameters on Interfacial Morphology of Al/Fe Magnetic Pulse welded Joints},
booktitle = {Proceedings of 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@inproceedings{CTT100836298,
author = {Shingo Kimura and Shinji Muraishi and SHINJI KUMAI},
title = {Numerical Analysis of Wavy Interface Formation in MPWed Al/Cu Joint},
booktitle = {Proceedings of 14th International Aluminium Conference (INALCO2019)},
year = 2019,
}
@inproceedings{CTT100836326,
author = {Kawamura Yusei and Mitsuhiro Watanabe and SHINJI KUMAI},
title = {Interface structure and strength of aluminum/aluminum-coated steel joint fabricated using magnetic pulse welding},
booktitle = {Proceedings of 14th International Aluminum Conference (INALCO2019)},
year = 2019,
}
@inproceedings{CTT100836358,
author = {河村宥成 and 渡邉満洋 and 熊井真次},
title = {電磁圧接したアルミニウム板/アルミニウムめっき鋼板接合材の界面組織},
booktitle = {軽金属学会第137回秋期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100813626,
author = {沖原麻耶 and 村石信二 and 熊井真次},
title = {調質の異なる1050アルミニウム板の電磁圧接界面},
booktitle = {軽金属学会 第137回秋期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100806656,
author = {横井湧士 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製した高Mg組成Al-Mg合金板の機械的性質},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100806657,
author = {丸山貴之 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法を用いたAl-Zn/Al-Mn/Al-Si系合金クラッド材の作製},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100836350,
author = {河村 宥成 and 渡邉満洋 and 熊井真次},
title = {アルミニウム/アルミニウムめっき鋼電磁圧接材の界面組織と強度},
booktitle = {軽金属学会関東支部2019年度若手研究者講演発表会概要集},
year = 2019,
}
@inproceedings{CTT100803996,
author = {Yuta Sano and Shinji Muraishi and Yohei Harada and Shinji Kumai},
title = {Effect of GP(I) and GP(II) Zones on Precipitation Microstructure and Hardness in A7050 Aluminum Alloy by Means of Two Step Aging},
booktitle = {},
year = 2019,
}
@inproceedings{CTT100803995,
author = {Ryo Muramatsu and Shinji Muraishi and Shinji Kumai},
title = {Indentation Microstructure and Stress Analysis of Age-Hardenable 7050 Aluminum Alloy},
booktitle = {},
year = 2019,
}
@inproceedings{CTT100813627,
author = {神戸貴史 and 村石信二 and 熊井真次},
title = {電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析},
booktitle = {軽金属溶接協会 年次講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100836289,
author = {神戸貴史 and 村石信二 and 熊井真次},
title = {電磁成形および電磁圧接したアルミニウム板の組織変化と熱履歴の数値解析},
booktitle = {軽金属溶接協会年次講演大会概要},
year = 2019,
}
@inproceedings{CTT100836373,
author = {熊谷 祐太 and 内田 明香 and 長島 遊 and 渡邉満洋 and 熊井真次},
title = {Al/Mg電磁圧接材の強度に及ぼす界面組織の影響},
booktitle = {},
year = 2019,
}
@inproceedings{CTT100813630,
author = {李 傑迪 and 村石信二 and 熊井真次},
title = {運動量パラメーターがAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響},
booktitle = {軽金属学会 第136回春期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100813628,
author = {神戸貴史 and 村石信二 and 熊井真次},
title = {電磁成形したアルミニウム板の最表面に生成される高速変形組織と変形挙動の数値解析},
booktitle = {軽金属学会 第136回春期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100836292,
author = {木村慎吾 and 村石信二 and 熊井真次},
title = {Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響},
booktitle = {軽金属学会第136回春期講演大会講演概要},
year = 2019,
}
@inproceedings{CTT100796013,
author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の圧下率増加によるRD, TD破断伸びの解消},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100836290,
author = {神戸貴史 and 村石信二 and 熊井真次},
title = {電磁成形したアルミニウム板の最表面に形成される高速変形組織と変形挙動の数値解析},
booktitle = {軽金属学会第136回春期講演大会講演概要},
year = 2019,
}
@inproceedings{CTT100836291,
author = {LiJiedi and 村石信二 and 熊井真次},
title = {運動量パラメータ―がAl-Fe電磁圧接界面に生成する中間層と温度履歴に及ぼす影響},
booktitle = {軽金属学会第136回春期講演大会講演概要},
year = 2019,
}
@inproceedings{CTT100813631,
author = {木村慎吾 and 村石信二 and 熊井真次},
title = {Al/Cu電磁圧接界面形態に及ぼす衝突角度の影響},
booktitle = {軽金属学会 第136回春期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100795220,
author = {佐野悠太 and 村石信二 and 原田陽平 and 熊井真次},
title = {A7050アルミニウム合金の時効析出挙動に及ぼす予備時効後の成形加工と2段目時効の効果},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100795221,
author = {Thai Ha Nguyen and Ram Song and Yohei Harada and Shinji Muraishi and Shinji Kumai},
title = {Castability and microstructural evolution of high manganese-containing Al-Mn-Si alloys fabricated by vertical-type high-speed twin-roll casting},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100795222,
author = {Simin Lei and Li Gao and Yohei Harada and Shinji Kumai},
title = {Microstructure analysis of quenched semi-solid A356 aluminum alloy slurry by using Weck’s reagent},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100795218,
author = {村松遼 and 村石信二 and 原田陽平 and 熊井真次},
title = {A7050析出強化型アルミニウム合金のナノインデンテーションによる微細組織と応力解析},
booktitle = {講演概要集},
year = 2019,
}
@inproceedings{CTT100813645,
author = {熊井真次},
title = {鉄鋼/Al合金の異材接合とその機構},
booktitle = {日本鉄鋼協会第177回春季講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100813625,
author = {木村慎吾 and 村石信二 and 熊井真次},
title = {Al/CuおよびAl/Niの電磁圧接界面における相違点と類似点},
booktitle = {軽金属学会 第137回秋期講演大会講演概要集},
year = 2019,
}
@inproceedings{CTT100777446,
author = {沖原麻耶 and 村石信二 and 熊井真次},
title = {調質の異なるアルミニウム板を用いた電磁圧接材の接合界面},
booktitle = {軽金属学会第135回秋期大会講演概要集},
year = 2018,
}
@inproceedings{CTT100777445,
author = {神戸貴史 and 村石信二 and 熊井真次},
title = {電磁圧接ならびに電磁成形したアルミニウム板の組織と変形挙動の数値解析},
booktitle = {軽金属学会第135回秋期大会講演概要集},
year = 2018,
}
@inproceedings{CTT100777053,
author = {佐野悠太 and 原田陽平 and 村石信二 and 熊井真次},
title = {A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100777054,
author = {Nguyenha and Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Muraishi and SHINJI KUMAI},
title = {Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100777442,
author = {熊井真次},
title = {種々の手法を用いて作製した異種金属接合材の接合界面形態と熱履歴},
booktitle = {軽金属学会第135回秋期大会講演概要集},
year = 2018,
}
@inproceedings{CTT100772640,
author = {市川智祥 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si系合金クラッド材の皮材組織形成過程},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100772639,
author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の組織と破断伸び異方性の低減},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100772641,
author = {丸山貴之 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法を用いた7072/3003/4045アルミニウム合金クラッド材の作製},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100777435,
author = {Ram Song and Shinji Muraishi and Shinji Kumai},
title = {EFFECT OF COOLING RATE ON CONSTITUENT PARTICLE FORMATION IN HIGH-SPEED TWIN-ROLL CAST Al-Mn BASED ALLOY STRIPS},
booktitle = {Congress Proceedings of the 73rd World Foundry Congress},
year = 2018,
}
@inproceedings{CTT100777432,
author = {Shinji Kumai and Yusuke Takayama},
title = {DEVEROPMENT OF IN SITU FABRICATION PROCESS OF CLAD MATERIALS BY USING TANDEM TWIN-ROLL CASTING},
booktitle = {Congress Proceedings of the 73rd World Foundry Congress},
year = 2018,
}
@inproceedings{CTT100777429,
author = {Mitsuhiro Watanabe and Shinji Kumai},
title = {Dissimilar Metal Joining of Aluminum and Copper Plates Using Magnetic Pulse Welding and Their Joint Strength},
booktitle = {Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18)},
year = 2018,
}
@inproceedings{CTT100777631,
author = {Shinji Kumai and Junto Nishiwaki},
title = {Formation Mechanism and Control of Impact Welded Interface in Dissimilar Metal Joints},
booktitle = {Proceedings of 2018ICAA16},
year = 2018,
}
@inproceedings{CTT100777633,
author = {Takashi Kambe and Yasutaka Kedo and Shinji Muraishi and Shinji Kumai},
title = {Numerical Analysis of Magnetic Pulse Forming and Deformation Structure of Pure Al and Cu Sheets},
booktitle = {Proceedings of 2018ICAA16},
year = 2018,
}
@inproceedings{CTT100836368,
author = {河村宥成 and 佐野 悠介 and 上田 結香子 and 渡邉満洋 and 熊井真次},
title = {電磁圧接したAl/鋼及びAl/Alめっき鋼板接合材の界面組織},
booktitle = {},
year = 2018,
}
@inproceedings{CTT100768958,
author = {李杰迪 and 神戸貴史 and 山岸大起 and 村石信二 and 熊井真次},
title = {数値解析を用いたAl/Fe電磁圧接界面に生成する中間層の再現},
booktitle = {},
year = 2018,
}
@inproceedings{CTT100777635,
author = {Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Kumai},
title = {Influence of Cooling Rates on Microstructure and Mn Supersaturation in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strips},
booktitle = {Proceedings of 2018ICAA16},
year = 2018,
}
@inproceedings{CTT100767841,
author = {Nan Jiang and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャストしたAl-Mg合金板材の凝固組織と表面性状},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100767842,
author = {原田陽平 and Nan Jiang and 熊井真次},
title = {縦型高速双ロールキャスト法による高Mg含有高強度Al-Mg系合金薄板の作製},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100768025,
author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
title = {縦型高速双ロールキャスト材より作製したAl-1~4mass%Mn合金板の機械的特性},
booktitle = {講演概要集},
year = 2018,
}
@inproceedings{CTT100755349,
author = {Ram Song and 原田陽平 and 村石信二 and 熊井真次},
title = {高速双ロールキャスト法によって作製したAl-Mn系合金板材内の晶出物分析},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100755350,
author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
title = {縦型高速双ロールキャスト材より作製したAl-1~4wt%Mn合金板の再結晶挙動},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100755348,
author = {原田陽平 and 李睿 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製したA356合金板材の周期的表面模様に及ぼす組成の影響},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100755941,
author = {K. Otsuka and Y. Harada and S. Muraishi and S. Kumai},
title = {Solidification process of Al-Mn alloy strips produced by high-speed twin-roll casting},
booktitle = {},
year = 2017,
}
@inproceedings{CTT100755942,
author = {R. Song and Y. Harada and S. Muraishi and S. Kumai},
title = {Microstructural analysis of dispersoids in high-speed twin-roll cast Al-Mn based alloy strip},
booktitle = {},
year = 2017,
}
@inproceedings{CTT100755940,
author = {Y. Takayama and Y. Harada and S. Muraishi and S. Kumai},
title = {Base/overlay interface of Al-Mn/Al-Si clad-strips produced by vertical-type tandem twin-roll casting},
booktitle = {},
year = 2017,
}
@inproceedings{CTT100753616,
author = {Jiang Nan and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製した高Mg組成Al-Mg合金板材の凝固組織},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100752338,
author = {熊井真次},
title = {実験的ならびに数値解析的手法による異種金属衝撃圧接メカニズムの解明},
booktitle = {日本金属学会2017年秋期講演大会(第161回)講演概要集},
year = 2017,
}
@inproceedings{CTT100752382,
author = {占部航平 and 西脇淳人 and 村石信二 and 熊井真次},
title = {Al/Cu異種金属接合材の電磁圧接挙動と中間層形成過程の数値解析},
booktitle = {日本金属学会2017年秋期講演大会講演概要集},
year = 2017,
}
@inproceedings{CTT100752383,
author = {毛戸康隆 and 神戸貴史 and 沖原麻耶 and 村石信二 and 熊井真次},
title = {実験ならびに数値解析によるAl/Al電磁圧接界面組織の検討},
booktitle = {},
year = 2017,
}
@inproceedings{CTT100752469,
author = {神戸貴史 and 毛戸康隆 and 村石信二 and 熊井真次},
title = {電磁圧接ならびに電磁成形した純銅板の組織と変形挙動},
booktitle = {},
year = 2017,
}
@inproceedings{CTT100753612,
author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト材を出発材とするAl-Si合金薄板の組織と機械的性質},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100753615,
author = {市川智祥 and 高山雄介 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製した4045/3003/4045アルミニウム合金クラッド材の皮材凝固挙動},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100743198,
author = {浅倉太一 and 原田陽平 and 熊井真次},
title = {金属樹脂積層板への固相スタッド接合における接合強度と組織に及ぼすスタッド形状の影響},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100743199,
author = {宋濫 and 原田陽平 and 村石信二 and 熊井真次},
title = {高速双ロールキャスト法により作製したAl-Mn系合金板材の分散相},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100743200,
author = {高山雄介 and 原田陽平 and 村石信二 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面接合に及ぼす芯材表面状態の影響},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100768959,
author = {李杰迪 and 西脇淳人 and 神戸貴史 and 山岸大起 and 熊井真次},
title = {実験ならびに数値解析によるAl/Fe電磁圧接挙動の検討},
booktitle = {講演概要集},
year = 2017,
}
@inproceedings{CTT100752541,
author = {西脇淳人 and 熊井真次},
title = {Cu/Al爆発圧接挙動に及ぼす衝突角度の影響},
booktitle = {軽金属学会第132回春期大会講演概要集},
year = 2017,
}
@inproceedings{CTT100752542,
author = {山岸大起 and 西脇淳人 and 村石信二 and 熊井真次},
title = {純アルミニウム/SS400爆発圧接界面の熱履歴と波状界面形成に及ぼす衝突条件の影響},
booktitle = {軽金属学会第132回春期講演大会講演概要},
year = 2017,
}
@inproceedings{CTT100752540,
author = {神戸貴史 and 毛戸康隆 and 西脇淳人 and 村石信二 and 熊井真次},
title = {純銅板の電磁成形挙動の解析と高速変形組織},
booktitle = {日本金属学会2017年春期講演大会(第160回)講演概要},
year = 2017,
}
@inproceedings{CTT100733956,
author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
title = {縦型高速双ロールキャスト法により急冷凝固したAl-1~4wt%Mn合金板のミクロ組織とMn固溶度},
booktitle = {講演概要集},
year = 2016,
}
@inproceedings{CTT100719140,
author = {菊地大輔 and 原田陽平 and 村石信二 and 熊井真次},
title = {縦型高速双ロールキャスト中の溶湯温度測定によるAC7A合金板表面の周期的帯状模様の形成要因の検討},
booktitle = {講演概要集},
year = 2016,
}
@inproceedings{CTT100719144,
author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
title = {縦型高速双ロールキャスト法により急冷凝固したAl-Mn合金板の凝固過程},
booktitle = {講演概要集},
year = 2016,
}
@inproceedings{CTT100719138,
author = {杉山智美 and 原田陽平 and 村石信二 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Cu合金/純Alクラッド材の凝固挙動},
booktitle = {講演概要集},
year = 2016,
}
@inproceedings{CTT100713015,
author = {Y. Takayama and Y. Harada and S. Muraishi and S. Kumai},
title = {Relationship between solidification microstructure and temperature change during clad strip fabrication by using vertical-type tandem twin-roll caster},
booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
year = 2016,
}
@inproceedings{CTT100712368,
author = {D. Kikuchi and Y. Harada and S. Muraishi and S. Kumai},
title = {Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin roll casting},
booktitle = {Technical Program},
year = 2016,
}
@inproceedings{CTT100712369,
author = {T. Sugiyama and Y. Takayama and Y. Harada and S. Kumai},
title = {Thermal history of Al-Cu alloy / pure Al clad strips fabricated by vertical-type tandem twin-roll casting},
booktitle = {Technical Program},
year = 2016,
}
@inproceedings{CTT100712370,
author = {T. Asakura and Y. Harada and S. Muraishi and S. Kumai},
title = {High-speed solid-state joining of aluminum alloy stud on aluminum-resin composite panel},
booktitle = {Technical Program},
year = 2016,
}
@inproceedings{CTT100712372,
author = {D. Yamagishi and Y. Aizawa and J. Nishiwaki and Y. Harada and S. Muraishi and S. Kumai},
title = {Microstructure and thermal history of explosive welded pure aluminum / SS400 steel joint},
booktitle = {Technical Program},
year = 2016,
}
@inproceedings{CTT100752381,
author = {Michihide Yoshino and SHOHEI IWAO and Shinji Muraishi and SHINJI KUMAI},
title = {Effect of Brazing Condition on Mechanical Property for Brazed Al-Mn Alloy},
booktitle = {},
year = 2016,
}
@inproceedings{CTT100719580,
author = {SHINJI KUMAI},
title = {Experimental and Numerical Analyses on Dissimilar-Metal Joining Using Impact Welding},
booktitle = {Final program of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)},
year = 2016,
}
@inproceedings{CTT100713016,
author = {R. Song and K. Otsuka and Y. Harada and S. Muraishi and S. Kumai},
title = {Microstructural characterization in high-speed twin roll cast Al-Mn based alloys strip},
booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
year = 2016,
}
@inproceedings{CTT100713014,
author = {SHINJI KUMAI and Yohei Harada and Li Gao},
title = {Color metallography of A356 aluminum alloy castings using Weck's reagent},
booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
year = 2016,
}
@inproceedings{CTT100714742,
author = {S. Kumai and Y. Takayama and R. Nakamura and D. Shimosaka and Y. Harada and M-S. Kim},
title = {Application of vertical-type high-speed twin-roll casting for up-grade recycling and clad sheets fabrication of aluminum alloys},
booktitle = {Materials Science Forum},
year = 2016,
}
@inproceedings{CTT100714748,
author = {S. Lei and L. Gao and Y. Harada and S. Kumai},
title = {Microstructure and mechanical properties of semi-solid die-cast A356 aluminum alloy},
booktitle = {Materials Science Forum},
year = 2016,
}
@inproceedings{CTT100714745,
author = {R. Song and Y. Harada and S. Muraishi and S. Kumai},
title = {Microstructural evolution of Al-Mn based alloy fabricated by vertical-type high-speed twin-roll casting},
booktitle = {Materials Science Forum},
year = 2016,
}
@inproceedings{CTT100714743,
author = {J. Nishiwaki and T. Kambe and Y. Kedo and Y. Harada and S. Muraishi and S. Kumai},
title = {Numerical analysis of wavy interface formation and successive temperature change in magnetic pulse welded Al/Cu joint},
booktitle = {Materials Science Forum},
year = 2016,
}
@inproceedings{CTT100706889,
author = {K. Prapasajchavet and Y. Harada and S. Kumai},
title = {Microstructure analysis of Al-5%Mg alloy semi-solid slurry by Weck’s reagent},
booktitle = {Program & Proceedings USB},
year = 2016,
}
@inproceedings{CTT100706888,
author = {Y. Takayama and Y. Harada and S. Kumai},
title = {Solidification Manner of Overlay Alloy in Al-Mn/Al-Si Alloy Clad Strips Produced by Vertical-Type Tandem Twin-Roll Casting},
booktitle = {Program & Proceedings USB},
year = 2016,
}
@inproceedings{CTT100707683,
author = {西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
title = {電磁圧接したAl/Cu接合材の波状界面の形成過程と接合界面の温度変化の数値解析},
booktitle = {講演概要集},
year = 2016,
}
@inproceedings{CTT100706887,
author = {S. Kumai and Y. Harada and L. Gao},
title = {Color metallography of A356 aluminum alloy castings using Weck’s reagent},
booktitle = {Program & Proceedings USB},
year = 2016,
}
@inproceedings{CTT100703140,
author = {田中裕太郎 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法によるAl-Mn合金の力学的特性の向上},
booktitle = {講演概要CD},
year = 2016,
}
@inproceedings{CTT100703141,
author = {李 睿 and 原田陽平 and 熊井真次},
title = {A356合金縦型高速双ロールキャスト材の表面周期模様に及ぼす合金成分の影響},
booktitle = {講演概要CD},
year = 2016,
}
@inproceedings{CTT100699103,
author = {山岸大起 and 相澤祐輔 and 西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
title = {純アルミニウム/SS400爆発圧接界面の組織と熱履歴},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100699104,
author = {相澤祐輔 and 西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
title = {Al/Fe爆発圧接界面に生成する中間層の組成と組織},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100699102,
author = {浅倉太一 and 原田陽平 and 熊井真次},
title = {アルミニウム合金スタッドとアルミニウム樹脂積層複合板の高速固相接合},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100752543,
author = {吉野路英 and 岩尾祥平 and 村石信二 and 熊井真次},
title = {ろう付加熱したAl-Mn系合金の機械的性質に及ぼす均質化処理およびろう付条件の影響},
booktitle = {軽金属学会第129回秋期講演大会講演概要},
year = 2015,
}
@inproceedings{CTT100698627,
author = {Y. Takayama and Y. Harada and S. Kumai},
title = {Microstructure of Al-Mn/Al-Si Alloy Clad Strips Produced by Vertical-Type Tandem Twin-Roll Casting},
booktitle = {Program Book},
year = 2015,
}
@inproceedings{CTT100698072,
author = {菊地大輔 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法を用いて作製したAC7A合金板材の表面性状と凝固組織},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100698071,
author = {杉山智美 and 髙山雄介 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法を用いたAl-Cu合金/純Alクラッド材作製中の温度変化と芯材内部割れの関係},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100690354,
author = {高立 and 原田陽平 and 熊井真次},
title = {Weck’s試液を用いた着色腐食法によるアルミニウム合金の組織解析},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100690352,
author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
title = {Cu/Al爆発圧接界面に形成される中間相の生成機構},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100690351,
author = {原田陽平 and 山田洋希 and 村石信二 and 熊井真次},
title = {高速固相接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100690504,
author = {髙山雄介 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法によるAl-Mn/Al-Si合金クラッド材製造中の温度変化と凝固組織の関係},
booktitle = {講演概要集},
year = 2015,
}
@inproceedings{CTT100679028,
author = {相澤祐輔 and 西脇淳人 and 原田陽平 and 熊井真次},
title = {実験ならびにシミュレーションによるAl/Fe爆発圧接と接合界面組織の解析},
booktitle = {軽金属学会第127回秋期大会講演概要},
year = 2014,
}
@inproceedings{CTT100679029,
author = {田中裕太郎 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャストした3003アルミニウム合金の再結晶挙動と力学的特性},
booktitle = {軽金属学会第127回秋期大会講演概要},
year = 2014,
}
@inproceedings{CTT100678347,
author = {髙山雄介 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の皮材凝固組織と界面接合状態の関係},
booktitle = {講演概要集},
year = 2014,
}
@inproceedings{CTT100673745,
author = {J. Nishiwaki and Y. Sawa and Y. Harada and S. Kumai},
title = {SPH analysis on formation manner of wavy joint interface in impact welded Al/Cu dissimilar metal plates},
booktitle = {Materials Science Forum},
year = 2014,
}
@inproceedings{CTT100673743,
author = {Y. Harada and K. Ishizuka and S. Kumai},
title = {Effect of coating layer on advanced stud welding of 2024 aluminum alloy to galvanized and galvannealed steel sheet},
booktitle = {Materials Science Forum},
year = 2014,
}
@inproceedings{CTT100673744,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Visualization of micro-segregations in A356 aluminum alloy by a color etching method},
booktitle = {Materials Science Forum},
year = 2014,
}
@inproceedings{CTT100679046,
author = {SHINJI KUMAI},
title = {Dissimilar-metal joining using several types of high-speed splid-state welding methods},
booktitle = {Materials Science Forum},
year = 2014,
}
@inproceedings{CTT100673037,
author = {山本裕晃 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製したA356合金板材の表面状態に及ぼす鋳造条件ならびに凝固組織の影響},
booktitle = {講演概要集},
year = 2014,
}
@inproceedings{CTT100673036,
author = {髙山雄介 and 中村亮司 and 原田陽平 and 熊井真次},
title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面組織に及ぼすSi組成の影響},
booktitle = {講演概要集},
year = 2014,
}
@inproceedings{CTT100673039,
author = {山田洋希 and 原田陽平 and 熊井真次},
title = {高速固相接合したSS400スタッドと5052アルミニウム合金板の接合強度と界面組織},
booktitle = {講演概要集},
year = 2014,
}
@inproceedings{CTT100679030,
author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
title = {爆発圧接したAl/Cu接合材の波状界面形成挙動の数値解析},
booktitle = {軽金属学会第126回春期大会講演概要},
year = 2014,
}
@inproceedings{CTT100668529,
author = {西脇淳人 and 原田陽平 and 熊井真次},
title = {Cu/Ni電磁圧接材の波状接合界面形成挙動のSPH法による数値解析},
booktitle = {講演概要CD},
year = 2014,
}
@inproceedings{CTT100668530,
author = {Li Gao and Yohei Harada and SHINJI KUMAI},
title = {A color etching method applied to characterize the solute segregation in spheroidal primary phase of semi-solid processed A356 aluminum alloy},
booktitle = {講演概要CD},
year = 2014,
}
@inproceedings{CTT100668527,
author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 寺山和子 and 新倉昭男},
title = {タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003/4045アルミニウム合金クラッド材のミクロ組織と機械的性質},
booktitle = {講演概要CD},
year = 2014,
}
@inproceedings{CTT100801970,
author = {熊井真次 and 金 民錫},
title = {縦型高速双ロールキャストしたアルミニウム合金板材の内部割れとその対策},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2014,
}
@inproceedings{CTT100665156,
author = {J. Nishiwaki and Y. Sawa and Y. Harada and S. Kumai},
title = {SPH analysis of wavy interface formation mechanism in magnetic pulse welded dissimilar metal joints},
booktitle = {Proceedings of IJST2013},
year = 2013,
}
@inproceedings{CTT100665155,
author = {Y. Harada and K. Ishizuka and S. Kumai},
title = {Advanced stud welding of 2024 aluminum alloy studs to SPCC plates},
booktitle = {Proceedings of IJST2013},
year = 2013,
}
@inproceedings{CTT100679032,
author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 寺山和子 and 新倉昭男},
title = {異なるプロセスにより製造した4045/3003アルミニウム合金クラッド材のミクロ組織と引張特性},
booktitle = {軽金属学会第125回秋期大会講演概要},
year = 2013,
}
@inproceedings{CTT100661608,
author = {SHINJI KUMAI},
title = {Development of Recycling-oriented Aluminum Alloys and Fabrication of In-situ Clad Strips by High Speed Twin Roll Casting},
booktitle = {Final Program of ACAA-2013},
year = 2013,
}
@inproceedings{CTT100679031,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Microstructural Characterization of Partially Re-melted A356 Aluminum Alloy by a Color Etching Method},
booktitle = {Final Program of ACAA-2013},
year = 2013,
}
@inproceedings{CTT100660511,
author = {西脇淳人 and 原田陽平 and 熊井真次},
title = {SPH法を用いた衝撃圧接におけるメタルジェットの放出挙動と波状界面形成の数値解析},
booktitle = {講演概要CD},
year = 2013,
}
@inproceedings{CTT100661621,
author = {熊井真次},
title = {高速固相接合したSS400スタッドとSPCCの接合組織},
booktitle = {日本金属学会2013年秋期講演大会講演概要集},
year = 2013,
}
@inproceedings{CTT100660510,
author = {佐田雄太郎 and 原田陽平 and 熊井真次},
title = {高速固相接合したSS400スタッドとSPCCの接合組織},
booktitle = {講演概要CD},
year = 2013,
}
@inproceedings{CTT100659247,
author = {Y. Harada and Y. Sada and S. Kumai},
title = {Joint Strength and Interfacial Microstructure of 2024 Aluminum Alloy Studs and AZ80 Magnesium Alloy Plates Joined by Advanced Stud Welding Method},
booktitle = {Program},
year = 2013,
}
@inproceedings{CTT100679039,
author = {S. Kumai and M-S. Kim and D. Shimosaka and Y. Harada},
title = {Fundamentals and Applications of Aluminum Alloy Strips Produced by Vertical-Type High-Speed Twin-Roll Caster},
booktitle = {Final program of PRICM8},
year = 2013,
}
@inproceedings{CTT100661617,
author = {熊井真次},
title = {縦型高速双ロールキャストしたAl-2mass%Si合金板材の鋳造欠陥の制御},
booktitle = {日本鋳造工学会第162回全国講演大会講演概要集},
year = 2013,
}
@inproceedings{CTT100679036,
author = {Li Gao and Yohei Harada and SHINJI KUMAI},
title = {Micro-segregations in semi-solid microstructure of both Ti-contained and Ti-less A356 aluminum alloys characterized by a color etching method},
booktitle = {日本鋳造工学会第162回全国講演大会講演概要集},
year = 2013,
}
@inproceedings{CTT100679034,
author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 寺山和子 and 新倉昭男},
title = {タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と引張特性に及ぼす熱処理の影響},
booktitle = {軽金属学会第124回春期大会講演概要},
year = 2013,
}
@inproceedings{CTT100679037,
author = {原田陽平 and 長野新介 and 熊井真次},
title = {リサイクル材の用途拡大に向けたFe添加A356アルミニウム合金の縦型高速双ロールキャスティング},
booktitle = {日本鋳造工学会第162回全国講演大会講演概要集},
year = 2013,
}
@inproceedings{CTT100653345,
author = {佐田雄太郎 and 原田陽平 and 熊井真次},
title = {SS400スタッドとSPCCの高速固相接合},
booktitle = {講演概要CD},
year = 2013,
}
@inproceedings{CTT100653344,
author = {西脇淳人 and 澤裕也 and 原田陽平 and 熊井真次},
title = {異種金属の衝撃圧接時の衝突挙動と界面形態に及ぼす金属の密度差の影響},
booktitle = {講演概要CD},
year = 2013,
}
@inproceedings{CTT100653346,
author = {Li Gao and Yohei Harada and SHINJI KUMAI},
title = {Solutes distributions in both dendritic and spheroidal aluminum grains characterized by a color etching method},
booktitle = {講演概要CD},
year = 2013,
}
@inproceedings{CTT100802266,
author = {山敷 拓也 and 白川 祐樹 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響},
booktitle = {日本機械学会論文集 A編},
year = 2013,
}
@inproceedings{CTT100801841,
author = {山敷 拓也 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響},
booktitle = {日本機械学会論文集 A編},
year = 2013,
}
@inproceedings{CTT100802192,
author = {山崎 雄允 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {702 高速双ロール法により作製したAl合金薄板のインライン圧延},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2012,
}
@inproceedings{CTT100802076,
author = {石原 拓也 and 柘植 浩志 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {707 2層クラッド材を用いた半溶融成形},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2012,
}
@inproceedings{CTT100802208,
author = {山敷 拓也 and 白川 祐樹 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {716 高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2012,
}
@inproceedings{CTT100801934,
author = {山敷 拓也 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {715 高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2012,
}
@inproceedings{CTT100801918,
author = {鎌倉 鎌倉 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {714 スクレイパーを装備した単ロール法によるアルミニウム合金薄板の作製},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2012,
}
@inproceedings{CTT100801818,
author = {石原 拓也 and 石井 啓太 and 柘植 浩志 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {縦型双ロールキャスターによるアルミニウム合金クラッド材の作製},
booktitle = {機械材料・材料加工技術講演会 M&P},
year = 2012,
}
@inproceedings{CTT100653343,
author = {中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 藤田和子 and 新倉昭男},
title = {タンデム式縦型双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と機械的性質,軽金属学会},
booktitle = {講演概要集},
year = 2012,
}
@inproceedings{CTT100802269,
author = {鎌倉 圭佑 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {半凝固温度域の広いAl合金の双ロールキャスティング},
booktitle = {機械材料・材料加工技術講演会 M&P},
year = 2012,
}
@inproceedings{CTT100653342,
author = {越川翔太 and 下坂大輔 and 原田陽平 and 熊井真次},
title = {急冷凝固したAl-11%Si-2.5%Cu合金の曲げ特性に及ぼす共晶Si相形態の影響},
booktitle = {講演概要集},
year = 2012,
}
@inproceedings{CTT100653341,
author = {長野新介 and 金民錫 and 原田陽平 and 熊井真次},
title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金板材の板厚中央部の組織に及ぼす鋳造条件の影響},
booktitle = {講演概要集},
year = 2012,
}
@inproceedings{CTT100653340,
author = {Li Gao and Yohei Harada and SHINJI KUMAI},
title = {Evaluation of Microstructure and Solid Fractions during Partial re-melting of A356 Aluminum Alloy by a Color Etching Method},
booktitle = {講演概要CD},
year = 2012,
}
@inproceedings{CTT100639852,
author = {SHINJI KUMAI},
title = {JOINING OF 2024 ALUMINUM ALLOY STUD TO AX80 MAGNESIUM ALLOY EXTRUDED PLATE BY ADVANCED HIGH-SPEED SOLID-STATE METHOD},
booktitle = {Proccedings of the 13th International Conference on Aluminum Alloys},
year = 2012,
}
@inproceedings{CTT100639856,
author = {SHINJI KUMAI},
title = {ANALYSIS OF DENDRITIC PRIMARY Al GRAIN RIPENING AND SOLID FRACTION MEASUREMENT IN A356 ALLOY SEMI-SOLID SLURRY USING SEGREGATION SENSITIVE REAGENT},
booktitle = {Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13)},
year = 2012,
}
@inproceedings{CTT100639854,
author = {SHINJI KUMAI},
title = {SINGLE ROLL CASTER TO CAST ALUMINUM ALLOY STRIP},
booktitle = {Procedings of the 13th International Conference of Aluminum Alloys (ICAA13)},
year = 2012,
}
@inproceedings{CTT100639855,
author = {SHINJI KUMAI},
title = {MICROSTRUCTURE OF 3003/4045 ALUMINUM ALLOY CLAD STRIP FABRICATED BY VERTICAL TYPE TANDEM TWIN ROLL CASTER},
booktitle = {Proceedings of the 13th International Conferece on Aluminum Alloys (ICAA13)},
year = 2012,
}
@inproceedings{CTT100639381,
author = {Y. Harada and Y. Sada and S. Kumai},
title = {Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method},
booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
year = 2012,
}
@inproceedings{CTT100639382,
author = {L. Gao and Y. Harada and S. Kumai},
title = {Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent},
booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
year = 2012,
}
@inproceedings{CTT100639383,
author = {R. Nakamura and T. Haga and Y. Harada and S. Kumai},
title = {Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster},
booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
year = 2012,
}
@inproceedings{CTT100639851,
author = {SHINJI KUMAI},
title = {EFFECTS OF PLATE THICKNESS AND PROJECTION SHAPE ON THE MICROSTRUCTURE AND STRENGTH OF HIGH-SPEED SOLID-STATE JOINED 2024 ALLOY STUDS AND 5052 ALLOY PLATES},
booktitle = {Proceddings of the 13th International Conference on Aluminum Alloys (ICAA13)},
year = 2012,
}
@inproceedings{CTT100639853,
author = {SHINJI KUMAI},
title = {Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Simila- and Dissimilar-Metal Plates},
booktitle = {Proceedings of the 13th International Conference on Aluminum alloys (ICAA13)},
year = 2012,
}
@inproceedings{CTT100639918,
author = {熊井真次},
title = {縦型双ロールキャスターによるクラッド材の作製},
booktitle = {軽金属学会第122回春期講演大会},
year = 2012,
}
@inproceedings{CTT100639917,
author = {熊井真次},
title = {タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織},
booktitle = {軽金属学会第122回春期講演大会概要},
year = 2012,
}
@inproceedings{CTT100639916,
author = {熊井真次},
title = {高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織},
booktitle = {軽金属学会第122回春期大会講演概要},
year = 2012,
}
@inproceedings{CTT100639915,
author = {熊井真次},
title = {6022アルミニウム合金板の摩擦攪拌スポット接合界面の組織と機械的性質に及ぼすプローブ底面形状の影響},
booktitle = {軽金属学会第122回春期大会講演概要},
year = 2012,
}
@inproceedings{CTT100638856,
author = {佐田雄太郎 and 原田陽平 and 熊井真次},
title = {高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織},
booktitle = {講演概要集},
year = 2012,
}
@inproceedings{CTT100638857,
author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
title = {タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織},
booktitle = {講演概要集},
year = 2012,
}
@inproceedings{CTT100639914,
author = {熊井真次},
title = {高速ロールキャスティングにおけるサイドダムプレートの位置がバリの発生に与える影響},
booktitle = {日本鋳造工学会第160回全国講演大会講演概要集},
year = 2012,
}
@inproceedings{CTT100639913,
author = {熊井真次},
title = {スクレイバーを用いた改良型単ロール法によるアルミニウム合金板の作製},
booktitle = {日本鋳造工学会第160回全国講演大会講演概要集},
year = 2012,
}
@inproceedings{CTT100802316,
author = {Haga, Toshio and Tsuge, Hiroshi and Ishihar, Takuya and SHINJI KUMAI and Watari, Hisaki},
title = {ROLL CASTER TO CAST CLAD STRIPS},
booktitle = {PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13)},
year = 2012,
}
@inproceedings{CTT100802249,
author = {鎌倉 圭佑 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {半凝固温度範囲が広域なAl合金の双ロールキャスティング},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2012,
}
@inproceedings{CTT100802149,
author = {山敷 拓也 and 藤野 暢人 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {高速双ロールキャスティングにおけるサイドダムプレートの位置がアルミニウム合金薄板エッジでのバリの発生に与える影響},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2012,
}
@inproceedings{CTT100633137,
author = {原田陽平 and 熊井真次},
title = {AZ80Mg合金の耐食性と時効硬化特性に及ぼすゾル-ゲル法によるCeO2製膜の影響},
booktitle = {講演概要CD},
year = 2011,
}
@inproceedings{CTT100633134,
author = {田中裕一 and 中村亮司 and 羽賀俊雄 and 原田陽平 and 熊井真次},
title = {タンデム式縦型双ロールキャスト法で作製した3000系/4000系アルミニウム合金クラッド材の接合界面組織},
booktitle = {講演概要CD},
year = 2011,
}
@inproceedings{CTT100802174,
author = {熊井真次},
title = {超高速傾斜衝突を利用した同種・異種金属の固相接合},
booktitle = {全国講演大会講演論文集},
year = 2011,
}
@inproceedings{CTT100633136,
author = {原田陽平 and 熊井真次},
title = {AZ80マグネシウム合金の時効硬化とゾル-ゲル法を用いた耐食性の同時付与},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633138,
author = {下坂大輔 and 原田陽平 and 熊井真次},
title = {Al-13%Mg2Si疑二元系共晶合金の共晶相形態と機械的性質におよぼす冷却速度の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633139,
author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
title = {タンデム式縦型双ロールキャスターにより鋳造した3000系/4000系アルミニウム合金クラッド材のミクロ組織},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633143,
author = {原田陽平 and 熊井真次},
title = {ゾルーゲル法によりCeO2製膜したAZ80マグネシウム合金の耐食性と時効硬化特性},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633144,
author = {金民錫 and 國本佳恵 and 原田陽平 and 熊井真次},
title = {Al-Si合金高速双ロールキャスト材の凝固組織に及ぼすSi組成とロール荷重の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633141,
author = {金民錫 and 國本佳恵 and 原田陽平 and 熊井真次},
title = {高速双ロールキャストしたAl-Si合金板材中央部の帯状組織に及ぼすSi組成の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633142,
author = {下坂大輔 and 星野剛 and 原田陽平 and 熊井真次},
title = {Al-11%Si-2.5%Cu合金の組織と機械的性質に及ぼす高速双ロールキャストによる急冷凝固の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633146,
author = {馮科研 and 原田陽平 and 熊井真次},
title = {摩擦撹拌スポット接合したアルミニウム合金板/GAめっき鋼板の接合界面組織},
booktitle = {},
year = 2011,
}
@inproceedings{CTT100633145,
author = {高谷謙斗 and 原田陽平 and 熊井真次},
title = {2024アルミニウム合金スタッドピンと6N01アルミニウム合金押出材の高速固相接合},
booktitle = {},
year = 2011,
}
@inproceedings{CTT100802176,
author = {羽賀 俊雄 and 秋津 和哉 and 山崎 雄允 and 熊井真次 and 渡利 久規},
title = {Al-SiCp合金の高速ロールキャスティング},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802282,
author = {金 民錫 and 熊井真次},
title = {高速双ロールキャストしたAl-2wt%Si合金板材中央部の帯状組織に及ぼす鋳造条件の影響},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802243,
author = {中村 亮司 and 新地 和弘 and 羽賀 俊雄 and 熊井真次},
title = {縦型タンデム双ロールキャスターにより鋳造したアルミニウム合金クラッド材},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802009,
author = {秋津 和哉 and 鎌倉 圭佑 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {スクレイパーを用いた単ロール法によるアルミニウム合金板の鋳造},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802191,
author = {米田 康祐 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {207 縦型高速双ロールキャスターによる5182合金薄板作製における巣の改善(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2010,
}
@inproceedings{CTT100633147,
author = {星野剛 and 原田陽平 and 熊井真次},
title = {高速双ロールキャストしたAl-11%Si-2.5%Cu合金板の組織と機械的性質},
booktitle = {講演概要集},
year = 2010,
}
@inproceedings{CTT100615905,
author = {馮科研 and 渡邉満洋 and 熊井真次},
title = {摩擦撹拌スポット接合したアルミニウム合金板とめっき鋼板の組織と強度に及ぼす接合時間の影響},
booktitle = {軽金属学会第119回秋期大会講演概要集},
year = 2010,
}
@inproceedings{CTT100801929,
author = {中村 亮司 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {203 クラッド材作製用縦型タンデム双ロールキャスターの特性(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2010,
}
@inproceedings{CTT100802140,
author = {秋津 和哉 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {204 スクレイパーを用いたロールキャスターによるアルミニウム合金板の作製(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2010,
}
@inproceedings{CTT100802006,
author = {山林 尚史 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {205 異径双ロールキャスターによるアルミニウム合金クラッド材の作製(溶融加工・半凝固加工,ものづくりにおける基礎研究と先端技術の融合)},
booktitle = {機械材料・材料加工技術講演会講演論文集},
year = 2010,
}
@inproceedings{CTT100633135,
author = {國本佳恵 and 金民錫 and 原田陽平 and 熊井真次},
title = {Al-Si合金高速双ロールキャスト材の粒状晶帯ならびに内部割れ発生に及ぼすSi組成の影響},
booktitle = {講演概要集},
year = 2010,
}
@inproceedings{CTT100633148,
author = {金民錫 and 原田陽平 and 熊井真次},
title = {高速ロールキャストしたAl-Si合金板材の内部割れ発生に及ぼす凝固組織の影響},
booktitle = {講演概要集},
year = 2010,
}
@inproceedings{CTT100614039,
author = {Keyan Feng and Mitsuhiro Watanabe and Shinji Kumai},
title = {Joining of aluminum alloy sheet to plated steel sheet by friction stir spot welding},
booktitle = {Abstracts of 2010 Asia Forum on Light Metals},
year = 2010,
}
@inproceedings{CTT100633128,
author = {Y. Harada and S. Tamura and S. Kumai},
title = {EFFECT OF SOLUTION HEAT TREATMENT CONDITION ON MICROSTRUCTURE AND TEAR TOUGHNESS IN A356 CAST ALLOYS},
booktitle = {Program and Abstract Book},
year = 2010,
}
@inproceedings{CTT100612147,
author = {Mitsuhiro Watanabe and Keyan Feng and Yoshio Nakamura and Shinji Kumai},
title = {Growth Manner of Intermetallic Compound Layer Produced at Friction Stir Spot Welded Al/Steel Lap Joint},
booktitle = {Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)},
year = 2010,
}
@inproceedings{CTT100612150,
author = {Feng Keyan and Mitsuhiro Watanabe and Shinji Kumai},
title = {Microstructure and Joint Strength of Friction Stir Spot Welded Aluminum Alloy Sheet and Plated Steel Sheets},
booktitle = {Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)},
year = 2010,
}
@inproceedings{CTT100612149,
author = {Shougo Kakizaki and Mitsuhiro Watanabe and Shinji Kumai},
title = {Metal Jet Emission and Wavy Interface Formation in High-speed Impact Welding},
booktitle = {Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)},
year = 2010,
}
@inproceedings{CTT100633129,
author = {Y. Harada and S. Tamura and S. Kumai},
title = {Microstructural Change during Solution Heat Treatment and Its Effect on Tear Toughness in A356 Cast Alloys},
booktitle = {Proceedings of ICAA12 (The 12th International Conference on Aluminium Alloys)},
year = 2010,
}
@inproceedings{CTT100612148,
author = {Shinji Kumai and Keisuke Hayashida and Mitsuhiro Watanabe},
title = {High-speed Solid-state Welding of 2xxx Aluminum Alloy Studs to 5xxx Aluminum Alloy Plates},
booktitle = {Proceedings of the 12th International Conference of Aluminum Alloys (ICAA12)},
year = 2010,
}
@inproceedings{CTT100605247,
author = {熊井真次 and 林田慶祐 and 渡邉満洋},
title = {アルミニウム合金スタッド接合材の破壊様式と接合界面組織との関係},
booktitle = {軽金属学会第118回春期大会講演概要集},
year = 2010,
}
@inproceedings{CTT100605439,
author = {相沢友勝 and 岡川啓悟 and 熊井真次 and 渡邉満洋},
title = {電磁シーム溶接された各種金属薄板の接合界面},
booktitle = {日本塑性加工学会第41回春季大会講演概要},
year = 2010,
}
@inproceedings{CTT100605248,
author = {柿崎正悟 and 渡邉満洋 and 熊井真次},
title = {アルミニウム板の高速衝撃圧着時のメタルジェット放出挙動},
booktitle = {軽金属学会第118回春期大会講演概要集},
year = 2010,
}
@inproceedings{CTT100633149,
author = {下坂大輔 and 原田陽平 and 熊井真次 and Federico Casarotto and 渡邉修一郎},
title = {Al-Mg-Si-Mn系合金の引裂靭性に及ぼす第二相粒子の影響},
booktitle = {講演概要集},
year = 2010,
}
@inproceedings{CTT100605246,
author = {Mitsuhiro Watanabe and Hiroshi Matsumoto and Keyan Feng and Yoshio Nakamura and Shinji Kumai},
title = {Effect of tool shape on interfacial microstructure of friction stir spot welded aluminum/steel lap joint},
booktitle = {Proceedings of The 8th International Symposium of Friction Stir Welding},
year = 2010,
}
@inproceedings{CTT100633150,
author = {原田 陽平 and 田村 信一 and 熊井 真次},
title = {時効硬化型AC4CHアルミニウム合金の引裂靭性に及ぼす溶体化処理条件の影響},
booktitle = {講演概要集},
year = 2010,
}
@inproceedings{CTT100802212,
author = {柘植 浩志 and 羽賀 俊雄 and 中村 亮司 and 熊井真次 and 渡利 久規},
title = {縦型タンデム双ロールキャスターにより鋳造したアルミニウム合金クラッド材の特性},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2010,
}
@inproceedings{CTT100801807,
author = {山林 尚史 and 秋津 和哉 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
title = {異径双ロールキャスターにより作製したアルミニウム合金クラッド材の性質},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2010,
}
@inproceedings{CTT100593617,
author = {Shinji Kumai and Mitsuhiro Watanabe and Keigo Okagawa and Tomokatsu Aizawa},
title = {Similar- and dissimilar-metal joining using magnetic pulse welding},
booktitle = {Proceedings of the 18th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XVIII)},
year = 2009,
}
@inproceedings{CTT100633132,
author = {M-S. Kim and D. Shimosaka and Y. Harada and S. Kumai},
title = {Change in Microstructure and Plate Thickness of High Speed Twin-Roll Cast Al-Si Alloys},
booktitle = {Proceedings of PFAM18 (Processing and Fabrication of Advanced Materials)},
year = 2009,
}
@inproceedings{CTT100633131,
author = {D. Shimosaka and M-S. Kim and Y. Harada and S. Kumai and F. Casarotto and S. Watanabe},
title = {Microstructure Refinement and Toughness Improvement of Rapidly-Solidified Aluminum Alloys Including Inherent Brittle Dispersed Particles},
booktitle = {Proceedings of PFAM18 (Processing and Fabrication of Advanced Materials)},
year = 2009,
}
@inproceedings{CTT100593616,
author = {Mitsuhiro Watanabe and Go Hagimoto and Shinji Kumai and Hisamichi Kimura and Akihisa Inoue},
title = {Microstructure of magnetic pulse welded metal/metallic glass interface},
booktitle = {Proceedings of the 18th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XVIII)},
year = 2009,
}
@inproceedings{CTT100592480,
author = {馮科研 and 渡邉満洋 and 熊井真次},
title = {アルミニウム合金板とめっき鋼板の摩擦撹拌スポット接合},
booktitle = {軽金属学会第117回秋期大会講演},
year = 2009,
}
@inproceedings{CTT100592481,
author = {林田慶祐 and 渡邉満洋 and 熊井真次},
title = {アルミニウム合金スタッド接合材の強度と接合機構},
booktitle = {軽金属学会第117回秋期大会講演},
year = 2009,
}
@inproceedings{CTT100592479,
author = {渡邉満洋 and 馮科研 and 熊井真次 and 中村吉男},
title = {摩擦撹拌スポット接合したアルミニウム/鋼接合材の接合界面組織と強度},
booktitle = {軽金属学会第117回秋期大会講演},
year = 2009,
}
@inproceedings{CTT100591524,
author = {原田陽平 and 田村信一 and 熊井真次},
title = {引裂靭性に及ぼすAC4CH合金のSiおよびFe系化合物粒子形態の影響},
booktitle = {講演概要集},
year = 2009,
}
@inproceedings{CTT100591523,
author = {田村信一 and 原田陽平 and 熊井真次},
title = {AC4CHアルミニウム合金鋳物の溶体化処理に伴う共晶Si粒子形態の変化と引裂靭性の関係},
booktitle = {講演概要集},
year = 2009,
}
@inproceedings{CTT100591521,
author = {下坂大輔 and 金民錫 and 原田陽平 and 熊井真次 and Federico Casarotto and 渡邉修一郎},
title = {高速双ロールキャストしたAl-5.5%Mg-2.3%Si-0.6%Mn合金の組織と引裂靱性},
booktitle = {講演概要集},
year = 2009,
}
@inproceedings{CTT100589968,
author = {Mitsuhiro Watanabe and Shinji Kumai and Qingsheng Zhang and Koji Nakayama and Hisamichi Kimura},
title = {Intermediate Layer Produced at Magnetic Pulse Welded Aluminum/Metallic Glass Interface},
booktitle = {},
year = 2009,
}
@inproceedings{CTT100589969,
author = {馮科研 and 渡邉満洋 and 熊井真次},
title = {摩擦撹拌スポット接合したアルミニウム合金/めっき鋼板接合材の接合界面組織と接合強度},
booktitle = {日本金属学会第145回秋期大会講演概要},
year = 2009,
}
@inproceedings{CTT100591522,
author = {Min Seok Kim and Daisuke Shimosaka and Yohei Harada and Shinji Kumai},
title = {Effect of Si Content on Solidification Structure and Plate Thickness of High Speed Twin-Roll Cast Al-Si Alloys},
booktitle = {講演概要集},
year = 2009,
}
@inproceedings{CTT100576521,
author = {林田慶祐 and 渡邉満洋 and 熊井真次},
title = {アルミニウム合金スタッド接合材の強度と接合界面組織},
booktitle = {軽金属学会第116回春期大会講演概要},
year = 2009,
}
@inproceedings{CTT100572396,
author = {渡邉満洋 and 熊井真次 and 萩本豪 and Qingsheng Zhang and 中山幸仁 and 木村久道},
title = {電磁力衝撃圧着した金属/金属ガラス重ね合せ接合材の接合界面組織},
booktitle = {日本金属学会第144回春期大会講演概要},
year = 2009,
}
@inproceedings{CTT100572395,
author = {熊井真次 and 渡邉満洋 and 荒木愛美 and 岡川啓悟 and 相沢友勝},
title = {電磁力衝撃圧着を利用したアルミニウム板多層接合と接合界面解析},
booktitle = {日本金属学会第144回春期大会講演概要},
year = 2009,
}
@inproceedings{CTT100572071,
author = {Hisashi Serizawa and Mitsuhiro Watanabe and Shinji Kumai},
title = {Basic Study of Joint Interface Formation in Magnetic Pressure Seam Welding},
booktitle = {},
year = 2009,
}
@inproceedings{CTT100567311,
author = {Mitsuhiro Watanabe and Shinji Kumai and Go Hagimoto and Qingsheng Zhang and Koji Nakayama},
title = {Interfacial Microstructure of Metal/Metallic Glass Lap Joint Fabricated by Magnetic Pulse Welding},
booktitle = {},
year = 2008,
}
@inproceedings{CTT100567309,
author = {Hisashi Serizawa and Isao Shibahara and Sherif Rashed and Hidekazu Murakawa and Mitsuhiro Watanabe and Shinji Kumai},
title = {Numerical Simulation of Interface Formation in Magnetic Pressure Seam Welding},
booktitle = {},
year = 2008,
}
@inproceedings{CTT100567307,
author = {萩本豪 and 熊井真次 and 渡邉満洋 and 相沢友勝 and 岡川啓悟},
title = {電磁力衝撃圧着したアルミニウム/金属ガラス重ね合せ接合材の接合界面},
booktitle = {軽金属学会第115回秋期大会講演概要},
year = 2008,
}
@inproceedings{CTT100567306,
author = {荒木愛美 and 熊井真次 and 渡邉満洋 and 相沢友勝 and 岡川啓悟},
title = {電磁力衝撃圧着した純アルミニウム板多層接合材の接合界面形態},
booktitle = {軽金属学会第115回秋期大会講演概要},
year = 2008,
}
@inproceedings{CTT100567305,
author = {渡邉満洋 and 熊井真次 and 岡川啓悟 and 相沢友勝},
title = {高速度ビデオカメラによるAl板材の電磁力衝撃圧着の直接観察},
booktitle = {軽金属学会第114回春期大会講演概要},
year = 2008,
}
@inproceedings{CTT100567310,
author = {熊井真次 and 李光鎭 and 渡邉満洋},
title = {種々の先端的手法によるアルミニウム合金/鋼異材重ね合せ接合},
booktitle = {軽金属学会第114回春期大会講演概要},
year = 2008,
}
@inproceedings{CTT100567308,
author = {Shinji Kumai and Mitsuhiro Watanabe},
title = {Microstructure and mechanical properties of friction stir welded aluminum alloy / steel lap joint},
booktitle = {Proceedings of The 7th International Symposium of Friction Stir Welding},
year = 2008,
}
@inproceedings{CTT100567303,
author = {渡邉満洋 and 熊井真次 and 岡川啓悟 and 相沢友勝},
title = {超高速動画撮影による電磁力衝撃圧着過程のその場観察},
booktitle = {溶接学会第82回春季大会講演概要},
year = 2008,
}
@inproceedings{CTT100567304,
author = {渡邉満洋 and 熊井真次},
title = {電磁力衝撃圧着したAl/AlおよびCu/Cu同種接合材の接合界面形態と微細組織},
booktitle = {溶接学会第82回春季大会講演概要},
year = 2008,
}
@inproceedings{CTT100567302,
author = {Shuhei Kajiyama and Mitsuhiro Watanabe and Shinji Kumai and Tomokatsu Aizawa},
title = {Interfacial microstructure of Al/Cu lap joints welded by magnetic pressure seam welding},
booktitle = {},
year = 2007,
}
@inproceedings{CTT100567301,
author = {Mitsuhiro Watanabe and Kentaro Ishiuchi and Shinji Kumai and Nobuhiro Ishikawa and Kazuo Furuya and Tomokatsu Aizawa},
title = {Interfacial microstructure of the impact welded Cu-Ni and Cu-Fe lap joints},
booktitle = {},
year = 2007,
}
@inproceedings{CTT100567300,
author = {渡邉満洋 and 熊井真次 and 石内健太郎 and 梶山修平 and 相沢友勝},
title = {電磁力衝撃圧着したAl/FeおよびAl/Ni接合界面の中間層},
booktitle = {軽金属学会第112回春期大会講演概要},
year = 2007,
}
@inproceedings{CTT100567299,
author = {梶山修平 and 熊井真次 and 渡邉満洋 and 石内健太郎 and 相沢友勝},
title = {電磁力による純アルミニウム板と純銅板の衝撃圧着と接合界面の解析},
booktitle = {軽金属学会第111回秋期大会講演概要},
year = 2006,
}
@inproceedings{CTT100567298,
author = {石内健太郎 and 熊井真次 and 渡邉満洋 and 梶山修平 and 相沢友勝},
title = {電磁力衝撃圧着したCu/Ni,Cu/FeおよびCu/Al接合材の界面組織},
booktitle = {日本金属学会第139回秋期大会講演概要},
year = 2006,
}
@inproceedings{CTT100567296,
author = {渡邉満洋 and 熊井真次 and 石内健太郎 and 梶山修平 and 相沢友勝},
title = {電磁シーム溶接した異種金属接合材の界面組織},
booktitle = {軽金属学会第110回春期大会講演概要},
year = 2006,
}
@inproceedings{CTT100567297,
author = {相沢友勝 and 米山夏樹 and 熊井真次 and 渡邉満洋},
title = {アモルファス金属箔の電磁圧接},
booktitle = {溶接学会第78回春季大会講演概要},
year = 2006,
}
@inproceedings{CTT100526023,
author = {羽賀俊雄 and 阪口洋 and 乾秀喜 and 渡利久規 and 熊井真次 and 鈴木健太},
title = {直径1500mm双ロールキャスターによるA6061合金板の作製},
booktitle = {平成18年度塑性加工春季講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526032,
author = {T.Haga and M.Ikawa and H.Watari and S.Kumai},
title = {High speed roll casting of 6016 aluminum alloy strip},
booktitle = {Manufacturing Science and Technology, ICOMAST2006},
year = 2006,
}
@inproceedings{CTT100526031,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 渡利久規},
title = {異径双ロールキャスターによるA6111のロールキャスティング},
booktitle = {第149回日本鋳造工学会全国講演大会講演概要集},
year = 2006,
}
@inproceedings{CTT100526030,
author = {羽賀俊雄 and 坂口洋 and 乾秀喜 and 熊井真次 and 渡利久規},
title = {直径1500mm双ロールキャスタによる6000系合金のロールキャスティング},
booktitle = {第149回日本鋳造工学会全国講演大会講演概要集},
year = 2006,
}
@inproceedings{CTT100526029,
author = {羽賀俊雄 and 阪口洋 and 乾秀喜 and 熊井真次 and 鈴木健太 and 渡利久規},
title = {直径1500mm双ロールキャスタによるA6061合金のロールキャスティング},
booktitle = {第148回日本鋳造工学会全国講演大会講演概要集},
year = 2006,
}
@inproceedings{CTT100526028,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 鈴木健太 and 渡利久規},
title = {異径双ロールキャスターによる不純物を添加したアルミニウム合金のストリップキャスティング},
booktitle = {第148回日本鋳造工学会全国講演大会講演概要集},
year = 2006,
}
@inproceedings{CTT100526027,
author = {石内健太郎 and 渡邉満洋 and 梶山修平 and 熊井真次 and 相沢友勝},
title = {電磁力衝撃圧着したCu/Ni,Cu/FeおよびCu/Al接合材の界面組織},
booktitle = {日本金属学会第139回大会講演概要},
year = 2006,
}
@inproceedings{CTT100526026,
author = {宮崎武 and 徳田健二 and 石原暁子 and 永田雄介 and 鈴木健太 and 熊井真次 and 羽賀俊雄},
title = {高速双ロールキャストした6022アルミニウム合金板材の鋳造割れ抑制},
booktitle = {日本金属学会第138回大会講演概要},
year = 2006,
}
@inproceedings{CTT100526025,
author = {羽賀俊雄 and 阪口洋 and 乾秀喜 and 熊井真次 and 渡利久規},
title = {異径双ロールキャスターによるA6111合金板の作製},
booktitle = {第57回塑性加工連合講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526024,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 渡利久規},
title = {直径1500mm双ロールキャスターによる6000系Al合金板の作製},
booktitle = {第57回塑性加工連合講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526022,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 鈴木健太 and 渡利久規},
title = {異径双ロールキャスターを用いたリサイクルアルミニウムのロールキャスティング},
booktitle = {平成18年度塑性加工春季講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526020,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 鈴木健太 and 渡利久規},
title = {異径双ロールキャスターによる鋳造用合金のストリップキャスティング},
booktitle = {平成18年度塑性加工春季講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526019,
author = {羽賀俊雄 and 阪口洋 and 乾秀喜 and 渡利久規 and 熊井真次},
title = {直径1500mm双ロールキャスターによるA6061合金板の作製},
booktitle = {2006年度日本機械学会年次大会講演論文集},
year = 2006,
}
@inproceedings{CTT100526018,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 熊井真次 and 渡利久規},
title = {異径双ロールキャスターによる鋳造用合金の半凝固ストリップキャスティング},
booktitle = {2006年度日本機械学会年次大会講演論文集},
year = 2006,
}
@inproceedings{CTT100526017,
author = {羽賀俊雄 and 乾秀喜 and 阪口洋 and 渡利久規 and 熊井真次 and 鈴木健太},
title = {直径1500mm双ロールキャスターによるAl合金板の作製},
booktitle = {第81回日本機械学会関西支部定時総会講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100526016,
author = {乾秀喜 and 羽賀俊雄 and 阪口洋 and 熊井真次 and 鈴木健太 and 渡利久規},
title = {異径双ロールキャスターによるA5182のストリップキャスティング},
booktitle = {第81回日本機械学会関西支部定時総会講演会講演論文集},
year = 2006,
}
@inproceedings{CTT100567295,
author = {渡邉満洋 and 熊井真次 and 石内健太郎 and 梶山修平 and 相沢友勝},
title = {電磁シーム溶接したFe/Al接合材の界面組織解析},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406670,
author = {渡邉 満洋 and 熊井 真次 and 石内 健太郎 and 梶山 修平 and 相沢 友勝},
title = {電磁シーム溶接したFe/Al接合材の界面組織解析},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406669,
author = {李 光鎮 and 熊井 真次 and 石川 信博 and 古屋 一夫},
title = {TEM-EDXと電子回折図形による鉄/アルミニウム合金レーザ接合材の界面組織解析},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406668,
author = {大川 武士 and 李 光鎮 and 佐藤 宏昌 and 熊井 真次 and 鈴木 健太},
title = {Fe/Al重ね合わせ摩擦撹拌接合材の界面に生成した層状組織},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406667,
author = {二木 秀幸 and 熊井 真次},
title = {摩擦撹拌接合した6N01アルミニウム合金の接合まま材および後熱処理材の引裂靱性評価},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406672,
author = {宮崎 武 and 徳田 健二 and 石原 暁子 and 永田 雄介 and 鈴木 健太 and 熊井 真次 and 羽賀 俊雄},
title = {高速双ロールキャストした6022アルミニウム合金板材の鋳造割れに及ぼす凝固組織の影響},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408356,
author = {鈴木 健太 and 熊井 真次 and 羽賀 俊雄},
title = {高速双ロールキャストした6022アルミニウム合金板の中央欠陥に及ぼす結晶粒径の影響},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408355,
author = {羽賀 俊雄 and 大濱 徳也 and 出口 要 and 井川 雅章 and 熊井 真次 and 鈴木 健太},
title = {高速双ロールキャストAl-Mg-Si合金板に及ぼすFeの影響},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408354,
author = {羽賀 俊雄 and 斉藤 祐樹 and 香呂 圭昭 and 井川 雅章 and 熊井 真次 and 鈴木 健太},
title = {高速双ロールキャスターにおけるロール材質とノズルの検討},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408353,
author = {熊井 真次},
title = {アルミニウム合金材料の引裂靱性に及ぼすミクロ組織の影響},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100406665,
author = {李 光鎮 and 新井 貴 and 熊井 真次},
title = {鉄/アルミニウムレーザ接合界面に生成する金属間化合物の種類と形状に及ぼす接合条件の影響},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408352,
author = {熊井 真次 and 羽賀 俊雄},
title = {高速双ロールキャスト法を利用したアルミニウム合金リサイクル材の高品質化と高機能化},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408351,
author = {羽賀 俊雄 and 井川 雅章 and 阪口 洋 and 村上 友幸 and 熊井 真次 and 鈴木 健太},
title = {1500mm大径ロールキャスターの試作},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408350,
author = {乾 秀喜 and 井川 雅章 and 羽賀 俊雄 and 熊井 真次 and 鈴木 健太},
title = {異径双ロールキャスターによる鋳造条件の検討},
booktitle = {軽金属学会第108回春期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408349,
author = {大川 武士 and 熊井 真次 and 鈴木 健太 and 李 光鎮 and 佐藤 宏昌},
title = {摩擦攪拌を利用したFe/Al重ね合わせ接合材の界面組織解析},
booktitle = {日本金属学会第137回大会講演概要},
year = 2005,
}
@inproceedings{CTT100406666,
author = {羽賀 俊雄 and 乾 秀喜 and 阪口 洋 and 堤 裕輔 and 熊井 真次 and 鈴木 健太 and 渡利 久規},
title = {異径双ロールキャスターによる5182アルミニウム合金のロールキャスティング},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100408348,
author = {米原 牧子 and 熊井 真次 and 磯野 宏秋 and 杉林 俊雄},
title = {銅、銅合金の光沢度と表面色に及ぼす表面粗さの影響},
booktitle = {日本金属学会第137回大会講演概要},
year = 2005,
}
@inproceedings{CTT100408347,
author = {宮崎 信弥 and 熊井 真次 and 佐藤 彰一},
title = {巨大単位胞を持つAl13Fe4における変形機構の温度依存},
booktitle = {日本金属学会第137回大会講演概要},
year = 2005,
}
@inproceedings{CTT100408346,
author = {宮崎 信弥 and 河内 篤 and 熊井 真次 and 佐藤 彰一},
title = {Al-Al13Fe4複相材の変形と組織},
booktitle = {日本金属学会第136回大会講演概要},
year = 2005,
}
@inproceedings{CTT100408345,
author = {李 光鎮 and 新井 貴 and 熊井 真次 and 佐藤 彰一},
title = {鉄/アルミニウム合金レーザ接合界面に生成した金属間化合物のTEM観察と微小領域組成分析},
booktitle = {日本金属学会第136回大会講演概要},
year = 2005,
}
@inproceedings{CTT100408344,
author = {鈴木 健太 and 熊井 真次 and 佐藤 彰一 and 石原 暁子 and 羽賀 俊雄},
title = {高速双ロールキャストした6022アルミニウム合金板の結晶粒形状制御による中心欠陥低減},
booktitle = {日本金属学会第136回大会講演概要},
year = 2005,
}
@inproceedings{CTT100408342,
author = {鈴木 健太 and 熊井 真次 and 徳田 健二 and 石原 暁子 and 宮崎 武 and 永田 雄介 and 羽賀 俊雄},
title = {高速双ロールキャスターにより作製したAl-Mg-Si合金薄板のミクロ組織と力学的性質に及ぼす鉄量の影響},
booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
year = 2005,
}
@inproceedings{CTT100408341,
author = {羽賀 俊雄 and 乾 秀喜 and 阪口 洋 and 熊井 真次 and 鈴木 健太 and 渡利 久規},
title = {異径双ロールキャスタによる鋳造用合金の双ロールキャスティング},
booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
year = 2005,
}
@inproceedings{CTT100408340,
author = {羽賀 俊雄 and 阪口 洋 and 乾 秀喜 and 熊井 真次 and 鈴木 健太 and 渡利 久規},
title = {直径1500双ロールキャスタによる高速ロールキャスティング},
booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
year = 2005,
}
@inproceedings{CTT100408339,
author = {向山 陽 and 熊井 真次},
title = {ADC12アルミニウム合金ダイカスト材の引裂靱性評価},
booktitle = {日本鋳造工学会第147回全国講演大会講演概要集},
year = 2005,
}
@inproceedings{CTT100406671,
author = {石原 暁子 and 徳田 健二 and 鈴木 健太 and 熊井 真次 and 羽賀 俊雄},
title = {鉄量の多い6022合金高速双ロールキャスト板材のミクロ組織と力学的特性},
booktitle = {軽金属学会第109回秋期大会講演概要},
year = 2005,
}
@inproceedings{CTT100567294,
author = {渡邉満洋 and 佐藤彰一 and 熊井真次},
title = {fcc金属の薄膜圧縮試験による強加工と変形組織},
booktitle = {日本金属学会第135回秋期大会講演概要},
year = 2004,
}
@inproceedings{CTT100408464,
author = {K.Suzuki and S.Kumai and Y.Saito and A.Sato and T.Haga},
title = {Microstructure and mechanical properties of aluminum alloy strips fabricated by a high speed twin-roll caster},
booktitle = {LiMAT 2003 Conference},
year = 2003,
}
@inproceedings{CTT100408463,
author = {K.J.Lee and S.Kumai and A.Sato},
title = {Interfacial strength and microstructure of laser-welded joints between aluminum alloy and steel plates},
booktitle = {LiMAT 2003 Conference},
year = 2003,
}
@inproceedings{CTT100408465,
author = {S.Miyazaki and T.Hirose and S.Kumai and A.Sato},
title = {Microstructures in an Al-Cu-Fe Quasi-Crystal after Deformation at Room Temperature},
booktitle = {Electron Microscopy: Its Role in Materials Science (The Mike Meshii Symposium)},
year = 2003,
}
@inproceedings{CTT100408466,
author = {Shinji Kumai and Sang-Won Han and Akikazu Sato},
title = {Fatigue and Fracture of Al-Si-Mg Cast Alloys Produced by Conventional and Semi-Liquid Processes},
booktitle = {Materials Science Forum(ICAA-8, Cambridge, UK)},
year = 2002,
}
@inproceedings{CTT100408470,
author = {Koji Katsumata and Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Low Cycle Fatigue and Fatigue Crack Growth in Semi-Liquid Die-Casting Processed Al-Si-Mg Alloys},
booktitle = {Fatigue},
year = 1999,
}
@inproceedings{CTT100408469,
author = {Natsuki Yoneyama and Takeyuki Masuya and Shinji Kumai and Akikazu Sato},
title = {High Speed Deformation and Structural Change in Ferrous Shape Memory Alloys},
booktitle = {Proc. Int. Conf. on Solid-Solid Phase Transformations (JIMIC-3)},
year = 1999,
}
@inproceedings{CTT100408468,
author = {Takeyuki Masuya and Natsuki Yoneyama and Shinji Kumai and Akikazu Sato},
title = {Grain Size Effect on the Microstructure of Deformed Fe-Mn-Si Based Shape Memory Alloys},
booktitle = {Proc. Int. Conf. on Shape Memory Materials, Materials science Forum},
year = 1999,
}
@inproceedings{CTT100408467,
author = {Akikazu Sato and Takeyuki Masuya and M. Morishita and Shinji Kumai and Akihisa Inoue},
title = {Strengthening of Fe-Mn-Si Based Shape Memory Alloys by Grain Size Refinement},
booktitle = {Proc. Int. Conf. on Shape Memory Materials, Materials Science Forum},
year = 1999,
}
@inproceedings{CTT100408471,
author = {Shinji Kumai and Koji Katsumata and Akikazu Sato},
title = {Effects of Microstructure on Low Cycle Fatigue Properties in HIP Treated Al-Si-Mg Base Cast Aluminum Alloys},
booktitle = {Proc. of 6th Int. Conf. on Aluminum alloys (ICAA-6, Toyohashi, Japan)},
year = 1998,
}
@inproceedings{CTT100408472,
author = {Shoji Aoki and Sang-Won Han and Shinji Kumai and Akikazu Sato},
title = {Fatigue Crack Growth Properties of Al-Si-Mg Base Cast aluminum Alloys},
booktitle = {Proc. of 6th Int. Conf. on Aluminum alloys (ICAA-6, Toyohashi, Japan)},
year = 1998,
}
@inproceedings{CTT100408474,
author = {Naoki Oiwa and Tatsuya Imai and Shinji Kumai and Akikazu Sato and Takashi Matsuo},
title = {Effect of Extruding Temperature on Creep Behavior of Spray-Forming Processed Al-8wt%Fe Alloys},
booktitle = {Proc. of 6th Int. Conf. on Aluminum alloys (ICAA-6, Toyohashi, Japan)},
year = 1998,
}
@inproceedings{CTT100408473,
author = {Akikazu Sato and Shinji Kumai and Yoshinao Mishima},
title = {Mechanical Properties of a Centrifugally Cast Al-Al3Ti Composite},
booktitle = {Proc. of 11th Congress of the International Federation for Heat Treatment and Surface Engineering},
year = 1998,
}
@inproceedings{CTT100408476,
author = {Eiji Tada and Kazuhiro Noda and Shinji Kumai and Tooru Tsuru},
title = {Monitoring and Analysis of Polarization Current Respond to Stress Cycles during Corrosion Fatigue Test},
booktitle = {13th International Corrosion Congress Proceedings},
year = 1996,
}
@inproceedings{CTT100408475,
author = {Shinji Kumai and Yakichi Higo},
title = {Effects of Delamination on the Transient Fatigue Crack Growth Behaviour Following Overloads in 8090-T8 Al-Li Alloys},
booktitle = {Proc. of the 5th International Conference on Aluminum Alloys},
year = 1996,
}
@inproceedings{CTT100408477,
author = {Shinji Kumai},
title = {Fatigue in Cast Aluminum Alloys and Composites},
booktitle = {NDT & SAFETY, International Workshop on Application of NDT Technology and Integrity Evaluation for Structural Safety Assurance},
year = 1996,
}
@inproceedings{CTT100408478,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Effects of Solidification Structure on Fatigue Crack Growth Properties of Cast Al-SiCp Composites},
booktitle = {Proc. of the 3rd Asian Foundry Congress},
year = 1995,
}
@inproceedings{CTT100408480,
author = {Jianqun Hu and Shinji Kumai and Yakichi Higo and Shigetomo Nunomura},
title = {The Effect of Microstructural Characteristics on Fatigue Crack Growth in SiC-Particulate-Reinforced Cast Aluminum Alloy Composites},
booktitle = {Proc. of the 5th International Conference on Fatigue and Fatigue Threshold},
year = 1993,
}
@inproceedings{CTT100408482,
author = {Shigetomo Nunomura and Shinji Noguchi and Tatsuo Yokoi and Shinji Kumai},
title = {Indentation Fatigue Testing for Micro Specimen and its Damaging Behaviour},
booktitle = {Proc. of the 5th International Conference on Fatigue and Fatigue Threshold},
year = 1993,
}
@inproceedings{CTT100408479,
author = {Shinji Kumai and Jianqun Hu and Makoto Ishikura and Yakichi Higo and Shigetomo Nunomura},
title = {The Effect of Particle Fracture on the Fatigue Crack Growth in Particulate-Reinforced Metal Matrix Composites},
booktitle = {Proc. of the 5th International Conference on Fatigue and Fatigue Threshold},
year = 1993,
}
@inproceedings{CTT100408483,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Tensile Properties of SiC Particlate Reinforced Cast Aluminium Alloy Composites},
booktitle = {Proc. of 3rd International Conference on Aluminium Alloys},
year = 1992,
}
@inproceedings{CTT100408484,
author = {Shinji Kumai and Jianqun Hu and Yakichi Higo and Shigetomo Nunomura},
title = {Fatigue Crack Growth in SiC Particulate Reinforced Cast Aluminium Alloy Composites},
booktitle = {Proc. of the 3rd International Conference on Aluminium Alloys},
year = 1992,
}
@inproceedings{CTT100408485,
author = {Yuzo Uchida and Shinji Kumai and Yakichi Higo and Shigetomo Nunomura},
title = {Stress Ratio Effects on Striation Morphology in 7075-T6 Aluminium Alloys},
booktitle = {Proc. of the 3rd International Conference on Aluminium Alloys},
year = 1992,
}
@inproceedings{CTT100408486,
author = {Shinji Kumai and Yakichi Higo and Shigetomo Nunomura},
title = {Effects of the Particle Distribution on Fatigue Crack Growth in SiC Particulate-Reinforced Aluminium Alloy Composites},
booktitle = {Science and Engineering of Light Metals (RASELM 91)},
year = 1991,
}
@inproceedings{CTT100408488,
author = {Shinji Noguchi and Yakichi Higo and Shinji Kumai and Shigetomo Nunomura},
title = {Indentation Loading Method as Minituarized Fatigue Tests},
booktitle = {Proc. of the 4th International Conference on Fatigue and Fatigue Threshold},
year = 1990,
}
@inproceedings{CTT100408487,
author = {Shinji Kuamai and Julia E.King and John F.Knott},
title = {Fatigue Crack Growth in SiC Particulate-Reinforced Aluminium Alloys},
booktitle = {Proc. of the 5th International Conference on Fatigue and Fatigue Threshold},
year = 1990,
}
@inproceedings{CTT100408489,
author = {Xiao Jie GAO and Yakichi HIGO and Shinji KUMAI and Masashi ONO and Shigetomo Nunomura and Kagehisa Murota and Yasuji Tomita and Hajime Sugiyama},
title = {Application of Acoustic Emission to Artificial Joint},
booktitle = {Progress in Acoustic Emission},
year = 1986,
}
@inproceedings{CTT100408490,
author = {Shinji Kumai and Michio Kawashima and Yakichi Higo and Shigetomo Nunomura},
title = {Acoustic Emission Generated during Cyclic Deformation in Al-1wt%Si Alloys},
booktitle = {Progress in Acoustic Emission},
year = 1986,
}
@misc{CTT100813646,
author = {熊井真次},
title = {My Favorite Things ー大学、研究室、学生諸君、そしてアルミニウムー},
year = 2019,
}
@misc{CTT100813647,
author = {熊井真次},
title = {衝撃圧接による異種金属の接合},
year = 2019,
}
@misc{CTT100813641,
author = {熊井真次},
title = {強くて優しい社会基盤材料を創るー東工大 熊井・村石研究室ー},
year = 2019,
}
@misc{CTT100753550,
author = {熊井真次 and 村石信二 and 原田陽平 and 糸井貴臣 and 前田将克},
title = {種々の先端的高速固相接合法により作製したアルミニウム合金同種・異種接合材の組織形成ならびに接合メカニズムの解明-軽金属奨学会平成27年度統合的先端研究の成果-},
year = 2017,
}
@misc{CTT100802151,
author = {熊井真次},
title = {贈る言葉},
year = 2013,
}
@misc{CTT100638670,
author = {熊井真次},
title = {研究、製造技術の歩みと展望 溶解・凝固・鋳造},
year = 2011,
}
@misc{CTT100553428,
author = {熊井真次},
title = {金属材料表面のテクスチャ -表面の凹凸と色との関係-},
year = 2007,
}
@misc{CTT100526046,
author = {T.Haga and H.Watari and S.Kumai},
title = {High Speed Roll Casting of Al Alloy and Mg Alloy Strips},
year = 2006,
}
@misc{CTT100526038,
author = {熊井真次},
title = {循環型アルミニウム材料の創製-凝固プロセスの開発と力学的特性の向上-},
year = 2006,
}
@misc{CTT100406673,
author = {熊井 真次},
title = {5.材料力学},
year = 2005,
}
@misc{CTT100596216,
author = {熊井真次},
title = {アルミニウム基合金および銅基合金の偏晶凝固に関する研究},
year = 1985,
}
@misc{CTT100734412,
author = {原田陽平 and 熊井真次 and 竹永 健二 and 斉藤 恒成 and 久保寺 美憲 },
title = {積層複合板への接合に用いるスタッドピン接合装置、及びスタッドピン接合方法},
howpublished = {登録特許},
year = 2020,
month = {},
note = {特願2015-038064(2015/02/27), 特開2016-159308(2016/09/05), 特許第6639790号(2020/01/07)}
}
@misc{CTT100711415,
author = {熊井真次 and 原田陽平 and 井上 馨亮 and 桜井 寛 and 源島 文彦 and 惣田 裕司 and 神戸 洋史 and 林 憲司 and 大塚 真司},
title = {成形性に優れたアルミニウム合金板},
howpublished = {登録特許},
year = 2019,
month = {},
note = {特願2014-217433(2014/10/24), 特開2016-084501(2016/05/19), 特許第6474582号(2019/02/08)}
}
@phdthesis{CTT100596216,
author = {熊井真次},
title = {アルミニウム基合金および銅基合金の偏晶凝固に関する研究},
school = {東京工業大学},
year = 1985,
}