@article{CTT100882061,
  author = {Thai Ha Nguyen and Ram Song and Yohei Harada and Shinji Muraishi and Shinji Kumai},
  title = {Effect of Large Particles in Central Band of Al­4%Mn­1%Si High-Speed Twin-Roll Cast Strip on Elongation of Cold-Rolled and Annealed Sheets},
  journal = {Materials Transactions},
  year = 2022,
}

@article{CTT100838193,
  author = {Thai Ha Nguyen and Ram Song and Yohei Harada and SHINJI KUMAI},
  title = {Color metallography of characteristic microstructure in high-speed twin-roll cast Al-Mn-Si alloy strip using Weck’s reagent},
  journal = {MATERIALS TRANSACTIONS},
  year = 2020,
}

@article{CTT100834867,
  author = {Y. Harada and H. Shinohara and T. Goda and S. Kumai},
  title = {Reduction of elongation anisotropy in cold-rolled and annealed Al-7%Si alloy strips fabricated by vertical-type high-speed twin-roll casting},
  journal = {MATERIALS TRANSACTIONS},
  year = 2020,
}

@article{CTT100834868,
  author = {S. Lei and L. Gao and Y. Harada and S. Kumai},
  title = {Microstructure Analysis of Quenched Semi-Solid A356 Aluminum Alloy Slurry by Using Weck’s Reagent},
  journal = {MATERIALS TRANSACTIONS},
  year = 2020,
}

@article{CTT100813637,
  author = {Yohei Harada and Taichi Asakura and Shinji Kumai},
  title = {Joining of Aluminum Alloy Stud and Aluminum alloy/Resin Composite Panel by Solid-State Stud-Welding},
  journal = {Proceedings of the 14th International Aluminum Conference (INALCO2019)},
  year = 2019,
}

@article{CTT100807836,
  author = {Y. Harada and N. Jiang and S. Kumai},
  title = {Mechanical properties of cold-rolled and annealed Al-12%Mg alloy sheet with high Mg solid solubility fabricated from vertical-type high-speed twin-roll cast strip},
  journal = {Materials Transactions},
  year = 2019,
}

@article{CTT100800492,
  author = {高山雄介 and 原田陽平 and 村石信二 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したA3003/A4045クラッド材界面の接合状態},
  journal = {鋳造工学},
  year = 2019,
}

@article{CTT100786115,
  author = {D. Kikuchi and Y. Harada and S. Kumai},
  title = {Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin-roll casting},
  journal = {Journal of Manufacturing Processes},
  year = 2019,
}

@article{CTT100786116,
  author = {原田陽平 and Nan Jiang and 熊井真次},
  title = {縦型高速双ロールキャストしたAl-Mg合金板の表面模様に及ぼすMg含有量の影響},
  journal = {鋳造工学},
  year = 2019,
}

@article{CTT100758186,
  author = {R. Song and Y. Harada and S. Kumai},
  title = {Influence of cooling rate on primary particle and solute distribution in high-speed twin-roll cast Al-Mn based alloy strip},
  journal = {Materials Transactions},
  year = 2018,
}

@article{CTT100758185,
  author = {原田陽平 and 浅倉太一 and 熊井真次},
  title = {アルミニウム合金スタッドとアルミニウム合金/樹脂積層板の固相スタッド接合},
  journal = {軽金属},
  year = 2017,
}

@article{CTT100753551,
  author = {高山雄介 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法で作製したAl-Mn/Al-Si合金クラッド材皮材の凝固挙動},
  journal = {鋳造工学},
  year = 2017,
}

@article{CTT100743196,
  author = {K. Prapasajchavet and Y. Harada and S. Kumai},
  title = {Microstructure analysis of Al-5.5at%Mg alloy semi-solid slurry by Weck's reagent},
  journal = {International Journal of Metalcasting},
  year = 2017,
}

@article{CTT100719717,
  author = {Y. Aizawa and J. Nishiwaki and Y. Harada and S. Muraishi and S. Kumai},
  title = {Experimental and Numerical Analysis of the Formation Behavior of Intermediate Layers at Explosive Welded Al/Fe Joint Interfaces},
  journal = {Journal of Manufacturing Processes},
  year = 2016,
}

@article{CTT100726557,
  author = {高山雄介 and 山野花穂 and 成田渉 and 中村亮司 and 筒井あかり and 原田陽平 and 村石信二 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製した熱交換器材料の組織とろう付特性},
  journal = {鋳造工学},
  year = 2016,
}

@article{CTT100719938,
  author = {原田陽平 and 山田洋希 and 熊井真次},
  title = {固相スタッド接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織と温度履歴},
  journal = {軽金属},
  year = 2016,
}

@article{CTT100709466,
  author = {Y. Harada and Y. Sada and S. Kumai},
  title = {Joining Steel Studs and Steel Plates by Solid-State Stud Welding and Estimation of Temperature near the Joint Interface},
  journal = {Journal of Manufacturing Processes},
  year = 2016,
}

@article{CTT100698912,
  author = {原田陽平 and 山本裕晃 and 長野新介 and 金民錫 and 熊井真次},
  title = {展伸材への利用に向けた鋳造用アルミニウム合金の高速双ロールキャストによる高性能化},
  journal = {鋳造工学},
  year = 2015,
}

@article{CTT100698629,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Microstructural characterization of aluminum alloys using Weck's reagent, part II: Coloring mechanism},
  journal = {Materials Characterization},
  year = 2015,
}

@article{CTT100698628,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Microstructural characterization of aluminum alloys using Weck's reagent, part I: Applications, Materials Characterization},
  journal = {Materials Characterization},
  year = 2015,
}

@article{CTT100690356,
  author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
  title = {Ｃｕ/Ａｌ爆発圧接材の接合プロセスと接合界面形態の数値解析},
  journal = {スマートプロセス学会誌},
  year = 2015,
}

@article{CTT100679024,
  author = {中村亮司 and 筒井あかり and 羽賀俊雄 and 原田陽平 and 熊井真次 and 寺山和子 and 新倉昭男},
  title = {タンデム式縦型高速双ロールキャスト法で作製した4045/3003/4045アルミニウム合金クラッド材の組織と機械的性質},
  journal = {軽金属},
  year = 2014,
}

@article{CTT100679027,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Visualization of solute distributions in dendritic and spheroidized Al grains characterized by both color etching method and electron probe microanalysis},
  journal = {Journal of Materials Science},
  year = 2014,
}

@article{CTT100676290,
  author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型双ロールキャスト法で作製したA4045/A3003/A4045合金クラッド材の接合界面組織},
  journal = {鋳造工学},
  year = 2014,
}

@article{CTT100676289,
  author = {Y. Harada and Y. Sada and S. Kumai},
  title = {Dissimilar joining of AA2024 aluminum studs and AZ80 magnesium plates by high-speed solid-state welding},
  journal = {Journal of Materials Processing Technology},
  year = 2014,
}

@article{CTT100657795,
  author = {Yohei Harada and Shinji Kumai},
  title = {Effect of ceramics coating using sol-gel processing on corrosion resistance and age hardening of AZ80 magnesium alloy substrate},
  journal = {Surface & Coatings Technology},
  year = 2013,
}

@article{CTT100658466,
  author = {下坂大輔 and 越川翔太 and 原田陽平 and 熊井真次},
  title = {急冷凝固したAl-11%Si-2.5%Cu合金板の曲げ性に及ぼす共晶Si相形態の影響},
  journal = {鋳造工学},
  year = 2013,
}

@article{CTT100657743,
  author = {下坂大輔 and 原田陽平 and 熊井真次},
  title = {急冷凝固したAl-11%Si-2.5%Cu合金の共晶Si相形態の変化と機械的性質への影響},
  journal = {鋳造工学},
  year = 2013,
}

@article{CTT100653339,
  author = {Y. H. Han and Y. Harada and J. F. Shackelford and J. Lee and K. Kakegawa},
  title = {HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3−Al2O3 system},
  journal = {Transactions of Nonferrous Metals Society of China},
  year = 2012,
}

@article{CTT100653338,
  author = {髙谷謙斗 and 原田陽平 and 熊井真次 and 北山健二},
  title = {高速固相接合した2024アルミニウム合金スタッドと6N01アルミニウム合金板の界面組織と機械的性質},
  journal = {軽金属},
  year = 2012,
}

@article{CTT100639958,
  author = {Li Gao and Yohei Harada and Shinji Kumai},
  title = {Analysis of Microstructure Evolution and Precise Solid Fraction Evaluation of A356 Aluminum Alloy during Partial Re-Melting by a Color Etching Method},
  journal = {Journal of Materials Science},
  year = 2012,
}

@article{CTT100633121,
  author = {Y. Harada and S. Tamura and S. Kumai},
  title = {Effects of High-Temperature Solutionizing on Microstructure and Tear Toughness of A356 Cast Aluminum Alloy},
  journal = {Materials Transactions},
  year = 2011,
}

@article{CTT100633120,
  author = {原田陽平 and 田村信一 and 熊井真次},
  title = {A356アルミニウム合金鋳物の組織と引裂靭性に及ぼす高温溶体化処理の影響},
  journal = {軽金属},
  year = 2011,
}

@article{CTT100633127,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Formation Process of GdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub> Eutectic-Like Microstructure from Amorphous Phase},
  journal = {Advances in Applied Ceramics},
  year = 2010,
}

@article{CTT100633126,
  author = {Y. H. Han and J. Yun and Y. Harada and T. Makino and K. Kakegawa},
  title = {Eutectic Structure Evolution of Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> System for Potential Hybrid Solar Cell Application},
  journal = {Advances in Applied Ceramics},
  year = 2010,
}

@article{CTT100633123,
  author = {Y. H. Han and J. Yun and Y. Harada and T. Makino and K. Kakegawa},
  title = {Eutectic Structure from Amorphous Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> System by Rapid Quenching Technique for Potential Hybrid Solar Cell Application},
  journal = {Advances in Applied Ceramics},
  year = 2010,
}

@article{CTT100588707,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Fabrication of Dense Material Having Homogeneous GdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub> Eutectic-Like Microstructure with Off-Eutectic Composition by Consolidation of the Amorphous},
  journal = {Journal of the European Ceramic Society},
  year = 2009,
}

@article{CTT100588705,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Development of Formation Method for Homogeneous and Fine Eutectic Like Microstructures with Off Eutectic Composition in Various Rare Earth Oxide-Al<sub>2</sub>O<sub>3</sub> Systems},
  journal = {Advances in Applied Ceramics},
  year = 2009,
}

@article{CTT100588704,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Formation of Ultra Fine Eutectic-Like Microstructures of Various Rare Earth Oxide-Al<sub>2</sub>O<sub>3</sub> Systems by Use of Amorphous Phases},
  journal = {Journal of Materials Research},
  year = 2008,
}

@article{CTT100588703,
  author = {Y. Harada and K. Ayabe and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Formation of GdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub> Composite Having Fine Pseudo-Eutectic Microstructure},
  journal = {Journal of the European Ceramic Society},
  year = 2008,
}

@article{CTT100588834,
  author = {原田 陽平 and 上川 直文 and 小島 隆 and 掛川 一幸},
  title = {アモルファスを用いた均一かつ微細なSmAlO<sub>3</sub>/Al<sub>2</sub>O<sub>3</sub>共晶様組織の形成},
  journal = {無機マテリアル学会会誌},
  year = 2008,
}

@article{CTT100588701,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Formation of Y<sub>3</sub>Al<sub>5</sub>O<sub>12</sub>-Al<sub>2</sub>O<sub>3</sub> Eutectic Microstructure with Off-Eutectic Composition},
  journal = {Journal of the European Ceramic Society},
  year = 2008,
}

@article{CTT100588700,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Fabrication of Y<sub>3</sub>Al<sub>5</sub>O<sub>12</sub>-Al<sub>2</sub>O<sub>3</sub> Eutectic Materials Having Ultra Fine Microstructure},
  journal = {Journal of the European Ceramic Society},
  year = 2008,
}

@article{CTT100588711,
  author = {K. Kakegawa and Y. Harada and N. Uekawa and T. Kojima},
  title = {Preparation of Ultra Fine Eutectic Structure in RE-Al<sub>2</sub>O<sub>3</sub> System (RE: Gd, Y, Sm, Yb, Ho, etc.)},
  journal = {Proceedings of the 2nd International Congress on Ceramics (ICC-2)},
  year = 2008,
}

@article{CTT100588696,
  author = {K. Kageyama and Y. Harada and H. Kato},
  title = {Preparation and Mechanical Properties of Alumina-Zirconia Composites with Agglomerated Structures Using Pre-Sintered Powder},
  journal = {Materials Transactions},
  year = 2003,
}

@article{CTT100588709,
  author = {H. Kato and Y. Harada and K. Kageyama},
  title = {Effect of Sintering Conditions on Mechanical Properties and Ultrasonic Characters of Alumina},
  journal = {Proceedings of the 6th Far-East Conference on Non-Destructive Testing (FENDT 2002)},
  year = 2002,
}

@inproceedings{CTT100882016,
  author = {Yuji TAKEHARA and Yuki ITO and Thai Ha NGUYEN and Yohei HARADA and Shinji MURAISHI and Shinji KUMAI},
  title = {Effect of homogenization heat treatment on elongation anisotropy in cold-rolled and annealed Al-Si alloy sheets fabricated from vertical-type high-speed twinroll cast strips},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100882015,
  author = {Shingo KAJIMURA and Seina KUROTATSU and Thai Ha NGUYEN and Yohei HARADA and Shinji MURAISHI and Shinji KUMAI},
  title = {Effect of nozzle shape on periodic surface patterns of Al-3 mass% Si alloy strips fabricated by vertical-type high-speed twin-roll casting},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100836098,
  author = {丸野瞬 and 吉野路英 and 岩尾祥平 and Nguyen Thai Ha and 原田陽平 and 村石信二 and 熊井真次},
  title = {高速双ロール鋳造を用いたAl-高Mn-Si系合金の機械的性質に及ぼす分散粒子の分布状態の影響},
  booktitle = {講演概要集},
  year = 2020,
}

@inproceedings{CTT100836097,
  author = {原田陽平},
  title = {アルミニウム合金のアップグレードリサイクルを目指した縦型高速双ロールキャスト法の活用},
  booktitle = {講演概要集},
  year = 2020,
}

@inproceedings{CTT100834872,
  author = {横井湧士 and 原田陽平 and 熊井真次},
  title = {FeならびにSi添加したA6022合金における縦型高速双ロールキャスト材の組織と機械的特性},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100834869,
  author = {T. Ha. Nguyen and R. Song and Y. Harada and S. Muraishi and S. Kumai and S. Maruno and M. Yoshino and S. Iwao},
  title = {Microstructure and mechanical properties of high-manganese-containing high-speed twin-roll cast Al-Mn-Si alloy strips and their cold-rolled sheets},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100834870,
  author = {Y. Harada and H. Shinohara and T. Goda and S. Kumai},
  title = {Effect of increasing rolling-reduction rate on suppression of elongation anisotropy in cold-rolled and annealed Al-7%Si alloy strip fabricated by vertical-type tandem high-speed twin-roll casting},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100834873,
  author = {宇留野玄暉 and 原田陽平 and 熊井真次},
  title = {A356合金板における共晶Si粒子の分散状態と破断伸び異方性に及ぼす高温溶体化処理の影響},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100834871,
  author = {梅山淳平 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロール鋳造によるA6022/Al-7%Si/A6022 3層クラッド材の作製},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100834874,
  author = {丸野瞬 and 吉野路英 and 岩尾祥平 and Nguyen Thai Ha and 原田陽平 and 村石信二 and 熊井真次},
  title = {高速双ロール鋳造を用いたAl-高Mn-Si系合金フィン材の機械的特性},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100841224,
  author = {朴 聖鎭 and 村石 信二 and 原田 陽平 and 熊井 真次},
  title = {90％冷間圧延したAA3003アルミニウム合金の粒界3重点の移動による回復挙動},
  booktitle = {},
  year = 2020,
}

@inproceedings{CTT100806657,
  author = {丸山貴之 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法を用いたAl-Zn/Al-Mn/Al-Si系合金クラッド材の作製},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100806656,
  author = {横井湧士 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製した高Mg組成Al-Mg合金板の機械的性質},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100803996,
  author = {Yuta Sano and Shinji Muraishi and Yohei Harada and Shinji Kumai},
  title = {Effect of GP(I) and GP(II) Zones on Precipitation Microstructure and Hardness in A7050 Aluminum Alloy by Means of Two Step Aging},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100795220,
  author = {佐野悠太 and 村石信二 and 原田陽平 and 熊井真次},
  title = {A7050アルミニウム合金の時効析出挙動に及ぼす予備時効後の成形加工と2段目時効の効果},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100796013,
  author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の圧下率増加によるRD, TD破断伸びの解消},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100795222,
  author = {Simin Lei and Li Gao and Yohei Harada and Shinji Kumai},
  title = {Microstructure analysis of quenched semi-solid A356 aluminum alloy slurry by using Weck’s reagent},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100795221,
  author = {Thai Ha Nguyen and Ram Song and Yohei Harada and Shinji Muraishi and Shinji Kumai},
  title = {Castability and microstructural evolution of high manganese-containing Al-Mn-Si alloys fabricated by vertical-type high-speed twin-roll casting},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100795218,
  author = {村松遼 and 村石信二 and 原田陽平 and 熊井真次},
  title = {A7050析出強化型アルミニウム合金のナノインデンテーションによる微細組織と応力解析},
  booktitle = {講演概要集},
  year = 2019,
}

@inproceedings{CTT100777054,
  author = {Nguyenha and Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Muraishi and SHINJI KUMAI},
  title = {Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100777053,
  author = {佐野悠太 and 原田陽平 and 村石信二 and 熊井真次},
  title = {A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100772639,
  author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の組織と破断伸び異方性の低減},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100772641,
  author = {丸山貴之 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法を用いた7072/3003/4045アルミニウム合金クラッド材の作製},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100772640,
  author = {市川智祥 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si系合金クラッド材の皮材組織形成過程},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100777635,
  author = {Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Kumai},
  title = {Influence of Cooling Rates on Microstructure and Mn Supersaturation in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strips},
  booktitle = {Proceedings of 2018ICAA16},
  year = 2018,
}

@inproceedings{CTT100767842,
  author = {原田陽平 and Nan Jiang and 熊井真次},
  title = {縦型高速双ロールキャスト法による高Mg含有高強度Al-Mg系合金薄板の作製},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100768025,
  author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト材より作製したAl-1～4mass%Mn合金板の機械的特性},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100767841,
  author = {Nan Jiang and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャストしたAl-Mg合金板材の凝固組織と表面性状},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100755349,
  author = {Ram Song and 原田陽平 and 村石信二 and 熊井真次},
  title = {高速双ロールキャスト法によって作製したAl-Mn系合金板材内の晶出物分析},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100755942,
  author = {R. Song and Y. Harada and S. Muraishi and S. Kumai},
  title = {Microstructural analysis of dispersoids in high-speed twin-roll cast Al-Mn based alloy strip},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100755941,
  author = {K. Otsuka and Y. Harada and S. Muraishi and S. Kumai},
  title = {Solidification process of Al-Mn alloy strips produced by high-speed twin-roll casting},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100755940,
  author = {Y. Takayama and Y. Harada and S. Muraishi and S. Kumai},
  title = {Base/overlay interface of Al-Mn/Al-Si clad-strips produced by vertical-type tandem twin-roll casting},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100755350,
  author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト材より作製したAl-1～4wt%Mn合金板の再結晶挙動},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100755348,
  author = {原田陽平 and 李睿 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したA356合金板材の周期的表面模様に及ぼす組成の影響},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100753616,
  author = {Jiang Nan and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製した高Mg組成Al-Mg合金板材の凝固組織},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100753615,
  author = {市川智祥 and 高山雄介 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製した4045/3003/4045アルミニウム合金クラッド材の皮材凝固挙動},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100753612,
  author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト材を出発材とするAl-Si合金薄板の組織と機械的性質},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100743198,
  author = {浅倉太一 and 原田陽平 and 熊井真次},
  title = {金属樹脂積層板への固相スタッド接合における接合強度と組織に及ぼすスタッド形状の影響},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100743200,
  author = {高山雄介 and 原田陽平 and 村石信二 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面接合に及ぼす芯材表面状態の影響},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100743199,
  author = {宋濫 and 原田陽平 and 村石信二 and 熊井真次},
  title = {高速双ロールキャスト法により作製したAl-Mn系合金板材の分散相},
  booktitle = {講演概要集},
  year = 2017,
}

@inproceedings{CTT100733956,
  author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト法により急冷凝固したAl-1～4wt%Mn合金板のミクロ組織とMn固溶度},
  booktitle = {講演概要集},
  year = 2016,
}

@inproceedings{CTT100719144,
  author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト法により急冷凝固したAl-Mn合金板の凝固過程},
  booktitle = {講演概要集},
  year = 2016,
}

@inproceedings{CTT100719140,
  author = {菊地大輔 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト中の溶湯温度測定によるAC7A合金板表面の周期的帯状模様の形成要因の検討},
  booktitle = {講演概要集},
  year = 2016,
}

@inproceedings{CTT100719138,
  author = {杉山智美 and 原田陽平 and 村石信二 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Cu合金/純Alクラッド材の凝固挙動},
  booktitle = {講演概要集},
  year = 2016,
}

@inproceedings{CTT100712369,
  author = {T. Sugiyama and Y. Takayama and Y. Harada and S. Kumai},
  title = {Thermal history of Al-Cu alloy / pure Al clad strips fabricated by vertical-type tandem twin-roll casting},
  booktitle = {Technical Program},
  year = 2016,
}

@inproceedings{CTT100713015,
  author = {Y. Takayama and Y. Harada and S. Muraishi and S. Kumai},
  title = {Relationship between solidification microstructure and temperature change during clad strip fabrication by using vertical-type tandem twin-roll caster},
  booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
  year = 2016,
}

@inproceedings{CTT100713014,
  author = {SHINJI KUMAI and Yohei Harada and Li Gao},
  title = {Color metallography of A356 aluminum alloy castings using Weck's reagent},
  booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
  year = 2016,
}

@inproceedings{CTT100712372,
  author = {D. Yamagishi and Y. Aizawa and J. Nishiwaki and Y. Harada and S. Muraishi and S. Kumai},
  title = {Microstructure and thermal history of explosive welded pure aluminum / SS400 steel joint},
  booktitle = {Technical Program},
  year = 2016,
}

@inproceedings{CTT100712370,
  author = {T. Asakura and Y. Harada and S. Muraishi and S. Kumai},
  title = {High-speed solid-state joining of aluminum alloy stud on aluminum-resin composite panel},
  booktitle = {Technical Program},
  year = 2016,
}

@inproceedings{CTT100712368,
  author = {D. Kikuchi and Y. Harada and S. Muraishi and S. Kumai},
  title = {Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin roll casting},
  booktitle = {Technical Program},
  year = 2016,
}

@inproceedings{CTT100713016,
  author = {R. Song and K. Otsuka and Y. Harada and S. Muraishi and S. Kumai},
  title = {Microstructural characterization in high-speed twin roll cast Al-Mn based alloys strip},
  booktitle = {Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers)},
  year = 2016,
}

@inproceedings{CTT100714748,
  author = {S. Lei and L. Gao and Y. Harada and S. Kumai},
  title = {Microstructure and mechanical properties of semi-solid die-cast A356 aluminum alloy},
  booktitle = {Materials Science Forum},
  year = 2016,
}

@inproceedings{CTT100714745,
  author = {R. Song and Y. Harada and S. Muraishi and S. Kumai},
  title = {Microstructural evolution of Al-Mn based alloy fabricated by vertical-type high-speed twin-roll casting},
  booktitle = {Materials Science Forum},
  year = 2016,
}

@inproceedings{CTT100714743,
  author = {J. Nishiwaki and T. Kambe and Y. Kedo and Y. Harada and S. Muraishi and S. Kumai},
  title = {Numerical analysis of wavy interface formation and successive temperature change in magnetic pulse welded Al/Cu joint},
  booktitle = {Materials Science Forum},
  year = 2016,
}

@inproceedings{CTT100714742,
  author = {S. Kumai and Y. Takayama and R. Nakamura and D. Shimosaka and Y. Harada and M-S. Kim},
  title = {Application of vertical-type high-speed twin-roll casting for up-grade recycling and clad sheets fabrication of aluminum alloys},
  booktitle = {Materials Science Forum},
  year = 2016,
}

@inproceedings{CTT100706889,
  author = {K. Prapasajchavet and Y. Harada and S. Kumai},
  title = {Microstructure analysis of Al-5%Mg alloy semi-solid slurry by Weck’s reagent},
  booktitle = {Program & Proceedings USB},
  year = 2016,
}

@inproceedings{CTT100706887,
  author = {S. Kumai and Y. Harada and L. Gao},
  title = {Color metallography of A356 aluminum alloy castings using Weck’s reagent},
  booktitle = {Program & Proceedings USB},
  year = 2016,
}

@inproceedings{CTT100706888,
  author = {Y. Takayama and Y. Harada and S. Kumai},
  title = {Solidification Manner of Overlay Alloy in Al-Mn/Al-Si Alloy Clad Strips Produced by Vertical-Type Tandem Twin-Roll Casting},
  booktitle = {Program & Proceedings USB},
  year = 2016,
}

@inproceedings{CTT100707683,
  author = {西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
  title = {電磁圧接したAl/Cu接合材の波状界面の形成過程と接合界面の温度変化の数値解析},
  booktitle = {講演概要集},
  year = 2016,
}

@inproceedings{CTT100703140,
  author = {田中裕太郎 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法によるAl-Mn合金の力学的特性の向上},
  booktitle = {講演概要CD},
  year = 2016,
}

@inproceedings{CTT100703141,
  author = {李 睿 and 原田陽平 and 熊井真次},
  title = {A356合金縦型高速双ロールキャスト材の表面周期模様に及ぼす合金成分の影響},
  booktitle = {講演概要CD},
  year = 2016,
}

@inproceedings{CTT100699103,
  author = {山岸大起 and 相澤祐輔 and 西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
  title = {純アルミニウム/SS400爆発圧接界面の組織と熱履歴},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100699102,
  author = {浅倉太一 and 原田陽平 and 熊井真次},
  title = {アルミニウム合金スタッドとアルミニウム樹脂積層複合板の高速固相接合},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100699104,
  author = {相澤祐輔 and 西脇淳人 and 原田陽平 and 村石信二 and 熊井真次},
  title = {Al/Fe爆発圧接界面に生成する中間層の組成と組織},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100698072,
  author = {菊地大輔 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法を用いて作製したAC7A合金板材の表面性状と凝固組織},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100698071,
  author = {杉山智美 and 髙山雄介 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法を用いたAl-Cu合金/純Alクラッド材作製中の温度変化と芯材内部割れの関係},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100698627,
  author = {Y. Takayama and Y. Harada and S. Kumai},
  title = {Microstructure of Al-Mn/Al-Si Alloy Clad Strips Produced by Vertical-Type Tandem Twin-Roll Casting},
  booktitle = {Program Book},
  year = 2015,
}

@inproceedings{CTT100690352,
  author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
  title = {Cu/Al爆発圧接界面に形成される中間相の生成機構},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100690351,
  author = {原田陽平 and 山田洋希 and 村石信二 and 熊井真次},
  title = {高速固相接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100690504,
  author = {髙山雄介 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法によるAl-Mn/Al-Si合金クラッド材製造中の温度変化と凝固組織の関係},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100690503,
  author = {原田陽平},
  title = {展伸材への利用拡大に向けた汎用アルミニウム合金のミクロ組織制御による高性能化},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100690354,
  author = {高立 and 原田陽平 and 熊井真次},
  title = {Weck’s試液を用いた着色腐食法によるアルミニウム合金の組織解析},
  booktitle = {講演概要集},
  year = 2015,
}

@inproceedings{CTT100679029,
  author = {田中裕太郎 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャストした3003アルミニウム合金の再結晶挙動と力学的特性},
  booktitle = {軽金属学会第127回秋期大会講演概要},
  year = 2014,
}

@inproceedings{CTT100679028,
  author = {相澤祐輔 and 西脇淳人 and 原田陽平 and 熊井真次},
  title = {実験ならびにシミュレーションによるAl/Fe爆発圧接と接合界面組織の解析},
  booktitle = {軽金属学会第127回秋期大会講演概要},
  year = 2014,
}

@inproceedings{CTT100678347,
  author = {髙山雄介 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の皮材凝固組織と界面接合状態の関係},
  booktitle = {講演概要集},
  year = 2014,
}

@inproceedings{CTT100673744,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Visualization of micro-segregations in A356 aluminum alloy by a color etching method},
  booktitle = {Materials Science Forum},
  year = 2014,
}

@inproceedings{CTT100673745,
  author = {J. Nishiwaki and Y. Sawa and Y. Harada and S. Kumai},
  title = {SPH analysis on formation manner of wavy joint interface in impact welded Al/Cu dissimilar metal plates},
  booktitle = {Materials Science Forum},
  year = 2014,
}

@inproceedings{CTT100673743,
  author = {Y. Harada and K. Ishizuka and S. Kumai},
  title = {Effect of coating layer on advanced stud welding of 2024 aluminum alloy to galvanized and galvannealed steel sheet},
  booktitle = {Materials Science Forum},
  year = 2014,
}

@inproceedings{CTT100679030,
  author = {西脇淳人 and 相澤祐輔 and 原田陽平 and 熊井真次},
  title = {爆発圧接したAl/Cu接合材の波状界面形成挙動の数値解析},
  booktitle = {軽金属学会第126回春期大会講演概要},
  year = 2014,
}

@inproceedings{CTT100673036,
  author = {髙山雄介 and 中村亮司 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si合金クラッド材の界面組織に及ぼすSi組成の影響},
  booktitle = {講演概要集},
  year = 2014,
}

@inproceedings{CTT100673037,
  author = {山本裕晃 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したA356合金板材の表面状態に及ぼす鋳造条件ならびに凝固組織の影響},
  booktitle = {講演概要集},
  year = 2014,
}

@inproceedings{CTT100673039,
  author = {山田洋希 and 原田陽平 and 熊井真次},
  title = {高速固相接合したSS400スタッドと5052アルミニウム合金板の接合強度と界面組織},
  booktitle = {講演概要集},
  year = 2014,
}

@inproceedings{CTT100668530,
  author = {Li Gao and Yohei Harada and SHINJI KUMAI},
  title = {A color etching method applied to characterize the solute segregation in spheroidal primary phase of semi-solid processed A356 aluminum alloy},
  booktitle = {講演概要CD},
  year = 2014,
}

@inproceedings{CTT100668527,
  author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 寺山和子 and 新倉昭男},
  title = {タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003/4045アルミニウム合金クラッド材のミクロ組織と機械的性質},
  booktitle = {講演概要CD},
  year = 2014,
}

@inproceedings{CTT100668529,
  author = {西脇淳人 and 原田陽平 and 熊井真次},
  title = {Cu/Ni電磁圧接材の波状接合界面形成挙動のSPH法による数値解析},
  booktitle = {講演概要CD},
  year = 2014,
}

@inproceedings{CTT100665156,
  author = {J. Nishiwaki and Y. Sawa and Y. Harada and S. Kumai},
  title = {SPH analysis of wavy interface formation mechanism in magnetic pulse welded dissimilar metal joints},
  booktitle = {Proceedings of IJST2013},
  year = 2013,
}

@inproceedings{CTT100665155,
  author = {Y. Harada and K. Ishizuka and S. Kumai},
  title = {Advanced stud welding of 2024 aluminum alloy studs to SPCC plates},
  booktitle = {Proceedings of IJST2013},
  year = 2013,
}

@inproceedings{CTT100679032,
  author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 寺山和子 and 新倉昭男},
  title = {異なるプロセスにより製造した4045/3003アルミニウム合金クラッド材のミクロ組織と引張特性},
  booktitle = {軽金属学会第125回秋期大会講演概要},
  year = 2013,
}

@inproceedings{CTT100679031,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Microstructural Characterization of Partially Re-melted A356 Aluminum Alloy by a Color Etching Method},
  booktitle = {Final Program of ACAA-2013},
  year = 2013,
}

@inproceedings{CTT100660510,
  author = {佐田雄太郎 and 原田陽平 and 熊井真次},
  title = {高速固相接合したSS400スタッドとSPCCの接合組織},
  booktitle = {講演概要CD},
  year = 2013,
}

@inproceedings{CTT100660511,
  author = {西脇淳人 and 原田陽平 and 熊井真次},
  title = {SPH法を用いた衝撃圧接におけるメタルジェットの放出挙動と波状界面形成の数値解析},
  booktitle = {講演概要CD},
  year = 2013,
}

@inproceedings{CTT100659247,
  author = {Y. Harada and Y. Sada and S. Kumai},
  title = {Joint Strength and Interfacial Microstructure of 2024 Aluminum Alloy Studs and AZ80 Magnesium Alloy Plates Joined by Advanced Stud Welding Method},
  booktitle = {Program},
  year = 2013,
}

@inproceedings{CTT100679039,
  author = {S. Kumai and M-S. Kim and D. Shimosaka and Y. Harada},
  title = {Fundamentals and Applications of Aluminum Alloy Strips Produced by Vertical-Type High-Speed Twin-Roll Caster},
  booktitle = {Final program of PRICM8},
  year = 2013,
}

@inproceedings{CTT100679034,
  author = {筒井あかり and 中村亮司 and 原田陽平 and 熊井真次 and 寺山和子 and 新倉昭男},
  title = {タンデム式縦型高速双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と引張特性に及ぼす熱処理の影響},
  booktitle = {軽金属学会第124回春期大会講演概要},
  year = 2013,
}

@inproceedings{CTT100679036,
  author = {Li Gao and Yohei Harada and SHINJI KUMAI},
  title = {Micro-segregations in semi-solid microstructure of both Ti-contained and Ti-less A356 aluminum alloys characterized by a color etching method},
  booktitle = {日本鋳造工学会第162回全国講演大会講演概要集},
  year = 2013,
}

@inproceedings{CTT100679037,
  author = {原田陽平 and 長野新介 and 熊井真次},
  title = {リサイクル材の用途拡大に向けたFe添加A356アルミニウム合金の縦型高速双ロールキャスティング},
  booktitle = {日本鋳造工学会第162回全国講演大会講演概要集},
  year = 2013,
}

@inproceedings{CTT100653346,
  author = {Li Gao and Yohei Harada and SHINJI KUMAI},
  title = {Solutes distributions in both dendritic and spheroidal aluminum grains characterized by a color etching method},
  booktitle = {講演概要CD},
  year = 2013,
}

@inproceedings{CTT100653345,
  author = {佐田雄太郎 and 原田陽平 and 熊井真次},
  title = {SS400スタッドとSPCCの高速固相接合},
  booktitle = {講演概要CD},
  year = 2013,
}

@inproceedings{CTT100653344,
  author = {西脇淳人 and 澤裕也 and 原田陽平 and 熊井真次},
  title = {異種金属の衝撃圧接時の衝突挙動と界面形態に及ぼす金属の密度差の影響},
  booktitle = {講演概要CD},
  year = 2013,
}

@inproceedings{CTT100653343,
  author = {中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 藤田和子 and 新倉昭男},
  title = {タンデム式縦型双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と機械的性質,軽金属学会},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100653342,
  author = {越川翔太 and 下坂大輔 and 原田陽平 and 熊井真次},
  title = {急冷凝固したAl-11%Si-2.5%Cu合金の曲げ特性に及ぼす共晶Si相形態の影響},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100653341,
  author = {長野新介 and 金民錫 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金板材の板厚中央部の組織に及ぼす鋳造条件の影響},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100653340,
  author = {Li Gao and Yohei Harada and SHINJI KUMAI},
  title = {Evaluation of Microstructure and Solid Fractions during Partial re-melting of A356 Aluminum Alloy by a Color Etching Method},
  booktitle = {講演概要CD},
  year = 2012,
}

@inproceedings{CTT100639382,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100639383,
  author = {R. Nakamura and T. Haga and Y. Harada and S. Kumai},
  title = {Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100639381,
  author = {Y. Harada and Y. Sada and S. Kumai},
  title = {Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100638857,
  author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100638856,
  author = {佐田雄太郎 and 原田陽平 and 熊井真次},
  title = {高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100633137,
  author = {原田陽平 and 熊井真次},
  title = {AZ80Mg合金の耐食性と時効硬化特性に及ぼすゾル－ゲル法によるCeO<sub>2</sub>製膜の影響},
  booktitle = {講演概要CD},
  year = 2011,
}

@inproceedings{CTT100633136,
  author = {原田陽平 and 熊井真次},
  title = {AZ80マグネシウム合金の時効硬化とゾル－ゲル法を用いた耐食性の同時付与},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633134,
  author = {田中裕一 and 中村亮司 and 羽賀俊雄 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型双ロールキャスト法で作製した3000系/4000系アルミニウム合金クラッド材の接合界面組織},
  booktitle = {講演概要CD},
  year = 2011,
}

@inproceedings{CTT100633139,
  author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型双ロールキャスターにより鋳造した3000系/4000系アルミニウム合金クラッド材のミクロ組織},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633138,
  author = {下坂大輔 and 原田陽平 and 熊井真次},
  title = {Al-13%Mg<sub>2</sub>Si疑二元系共晶合金の共晶相形態と機械的性質におよぼす冷却速度の影響},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633143,
  author = {原田陽平 and 熊井真次},
  title = {ゾルーゲル法によりCeO<sub>2</sub>製膜したAZ80マグネシウム合金の耐食性と時効硬化特性},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633144,
  author = {金民錫 and 國本佳恵 and 原田陽平 and 熊井真次},
  title = {Al-Si合金高速双ロールキャスト材の凝固組織に及ぼすSi組成とロール荷重の影響},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633142,
  author = {下坂大輔 and 星野剛 and 原田陽平 and 熊井真次},
  title = {Al-11%Si-2.5%Cu合金の組織と機械的性質に及ぼす高速双ロールキャストによる急冷凝固の影響},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633141,
  author = {金民錫 and 國本佳恵 and 原田陽平 and 熊井真次},
  title = {高速双ロールキャストしたAl-Si合金板材中央部の帯状組織に及ぼすSi組成の影響},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633140,
  author = {岩澤秀 and 茂泉健 and 原田陽平 and 山浦秀樹},
  title = {AC4CH-T6のミクロ組織，機械的性質に及ぼす溶体化処理条件の影響},
  booktitle = {講演概要集},
  year = 2011,
}

@inproceedings{CTT100633145,
  author = {高谷謙斗 and 原田陽平 and 熊井真次},
  title = {2024アルミニウム合金スタッドピンと6N01アルミニウム合金押出材の高速固相接合},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100633146,
  author = {馮科研 and 原田陽平 and 熊井真次},
  title = {摩擦撹拌スポット接合したアルミニウム合金板/GAめっき鋼板の接合界面組織},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100633135,
  author = {國本佳恵 and 金民錫 and 原田陽平 and 熊井真次},
  title = {Al-Si合金高速双ロールキャスト材の粒状晶帯ならびに内部割れ発生に及ぼすSi組成の影響},
  booktitle = {講演概要集},
  year = 2010,
}

@inproceedings{CTT100633147,
  author = {星野剛 and 原田陽平 and 熊井真次},
  title = {高速双ロールキャストしたAl-11%Si-2.5%Cu合金板の組織と機械的性質},
  booktitle = {講演概要集},
  year = 2010,
}

@inproceedings{CTT100633148,
  author = {金民錫 and 原田陽平 and 熊井真次},
  title = {高速ロールキャストしたAl-Si合金板材の内部割れ発生に及ぼす凝固組織の影響},
  booktitle = {講演概要集},
  year = 2010,
}

@inproceedings{CTT100633128,
  author = {Y. Harada and S. Tamura and S. Kumai},
  title = {EFFECT OF SOLUTION HEAT TREATMENT CONDITION ON MICROSTRUCTURE AND TEAR TOUGHNESS IN A356 CAST ALLOYS},
  booktitle = {Program and Abstract Book},
  year = 2010,
}

@inproceedings{CTT100633129,
  author = {Y. Harada and S. Tamura and S. Kumai},
  title = {Microstructural Change during Solution Heat Treatment and Its Effect on Tear Toughness in A356 Cast Alloys},
  booktitle = {Proceedings of ICAA12 (The 12th International Conference on Aluminium Alloys)},
  year = 2010,
}

@inproceedings{CTT100633149,
  author = {下坂大輔 and 原田陽平 and 熊井真次 and Federico Casarotto and 渡邉修一郎},
  title = {Al-Mg-Si-Mn系合金の引裂靭性に及ぼす第二相粒子の影響},
  booktitle = {講演概要集},
  year = 2010,
}

@inproceedings{CTT100633150,
  author = {原田 陽平 and 田村 信一 and 熊井 真次},
  title = {時効硬化型AC4CHアルミニウム合金の引裂靭性に及ぼす溶体化処理条件の影響},
  booktitle = {講演概要集},
  year = 2010,
}

@inproceedings{CTT100633130,
  author = {Y-H. Han and J. Yun and Y. Harada and T. Makino and K-H. Kim and S. Kwon and K. Kakegawa},
  title = {Eutectic Structure from an Amorphous Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>-Y<sub>2</sub>O<sub>3</sub> System by Rapid-Quenching Technique for Potential Hybrid Solar Cell Application},
  booktitle = {Final Program},
  year = 2010,
}

@inproceedings{CTT100633131,
  author = {D. Shimosaka and M-S. Kim and Y. Harada and S. Kumai and F. Casarotto and S. Watanabe},
  title = {Microstructure Refinement and Toughness Improvement of Rapidly-Solidified Aluminum Alloys Including Inherent Brittle Dispersed Particles},
  booktitle = {Proceedings of PFAM18 (Processing and Fabrication of Advanced Materials)},
  year = 2009,
}

@inproceedings{CTT100633132,
  author = {M-S. Kim and D. Shimosaka and Y. Harada and S. Kumai},
  title = {Change in Microstructure and Plate Thickness of High Speed Twin-Roll Cast Al-Si Alloys},
  booktitle = {Proceedings of PFAM18 (Processing and Fabrication of Advanced Materials)},
  year = 2009,
}

@inproceedings{CTT100591524,
  author = {原田陽平 and 田村信一 and 熊井真次},
  title = {引裂靭性に及ぼすAC4CH合金のSiおよびFe系化合物粒子形態の影響},
  booktitle = {講演概要集},
  year = 2009,
}

@inproceedings{CTT100591523,
  author = {田村信一 and 原田陽平 and 熊井真次},
  title = {AC4CHアルミニウム合金鋳物の溶体化処理に伴う共晶Si粒子形態の変化と引裂靭性の関係},
  booktitle = {講演概要集},
  year = 2009,
}

@inproceedings{CTT100591521,
  author = {下坂大輔 and 金民錫 and 原田陽平 and 熊井真次 and Federico Casarotto and 渡邉修一郎},
  title = {高速双ロールキャストしたAl-5.5%Mg-2.3%Si-0.6%Mn合金の組織と引裂靱性},
  booktitle = {講演概要集},
  year = 2009,
}

@inproceedings{CTT100591522,
  author = {Min Seok Kim and Daisuke Shimosaka and Yohei Harada and Shinji Kumai},
  title = {Effect of Si Content on Solidification Structure and Plate Thickness of High Speed Twin-Roll Cast Al-Si Alloys},
  booktitle = {講演概要集},
  year = 2009,
}

@inproceedings{CTT100588840,
  author = {原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {GdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>共晶系におけるアモルファスからの組織形成プロセス},
  booktitle = {講演要旨集},
  year = 2009,
}

@inproceedings{CTT100588836,
  author = {K. Kakegawa and Y. Harada and N. Uekawa and T. Kojima},
  title = {Formation of Self-Assembled Composite: Crystallization from Amorphous Phases of Eutectic Systems},
  booktitle = {List of Abstracts},
  year = 2009,
}

@inproceedings{CTT100588841,
  author = {牧野太郎 and 原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {超微細な組織を有するGdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub>三成分系共晶の作製},
  booktitle = {講演要旨集},
  year = 2009,
}

@inproceedings{CTT100588842,
  author = {原田陽平 and 永田正行 and 上川直文 and 小島隆 and 掛川一幸},
  title = {非共晶組成での均一な共晶様組織を有する焼結体の作製},
  booktitle = {講演予稿集},
  year = 2008,
}

@inproceedings{CTT100588843,
  author = {原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {非晶体を用いた微細組織形成法の希土類酸化物－Al<sub>2</sub>O<sub>3</sub>共晶系への応用},
  booktitle = {講演要旨集},
  year = 2008,
}

@inproceedings{CTT100588837,
  author = {K. Kakegawa and Y. Harada and N. Uekawa and T. Kojima},
  title = {Preparation of Ultra Fine Eutectic Structure in RE-Al<sub>2</sub>O<sub>3</sub> System (RE: Gd, Y, Sm, Yb, Ho, etc.)},
  booktitle = {Program},
  year = 2008,
}

@inproceedings{CTT100588844,
  author = {原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {希土類酸化物－Al<sub>2</sub>O<sub>3</sub>系における超微細共晶組織の形成},
  booktitle = {講演予稿集},
  year = 2008,
}

@inproceedings{CTT100588845,
  author = {原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {非晶体からの超微細共晶組織の形成},
  booktitle = {講演予稿集},
  year = 2007,
}

@inproceedings{CTT100588846,
  author = {原田陽平 and 綾部和哉 and 上川直文 and 小島隆 and 掛川一幸 and Sung Jin Kim},
  title = {微細な擬共晶組織を持つGdAlO<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>コンポジットの作製},
  booktitle = {講演要旨集},
  year = 2007,
}

@inproceedings{CTT100588838,
  author = {Y. Harada and N. Uekawa and T. Kojima and K. Kakegawa},
  title = {Fabrication of Eutectic Materials Having Ultra-Fine Microstructure},
  booktitle = {Meeting Guide and Abstract Book},
  year = 2006,
}

@inproceedings{CTT100588847,
  author = {原田陽平 and 上川直文 and 小島隆 and 掛川一幸},
  title = {非晶体を用いた超微細共晶組織を持つ材料の開発},
  booktitle = {講演要旨集},
  year = 2006,
}

@inproceedings{CTT100588848,
  author = {蔭山健介 and 原田陽平 and 吉川剛史 and 加藤寛},
  title = {凝集組織がアルミナ－ジルコニア複合セラミックスの力学的特性に及ぼす影響},
  booktitle = {},
  year = 2002,
}

@inproceedings{CTT100588849,
  author = {蔭山健介 and 原田陽平 and 加藤寛},
  title = {大気中常圧焼結による凝集組織セラミックスの製造と力学的特性の評価},
  booktitle = {},
  year = 2002,
}

@inproceedings{CTT100588850,
  author = {原田陽平 and 蔭山健介 and 加藤寛},
  title = {アルミナ凝集粉末によるAl<sub>2</sub>O<sub>3</sub>/ZrO<sub>2</sub>焼結体の構造制御と力学的特性の評価},
  booktitle = {},
  year = 2001,
}

@inproceedings{CTT100588851,
  author = {加藤寛 and 原田陽平 and 蔭山健介},
  title = {アルミナの機械的性質及び超音波特性に及ぼす熱処理条件の影響},
  booktitle = {},
  year = 2001,
}

@misc{CTT100753550,
  author = {熊井真次 and 村石信二 and 原田陽平 and 糸井貴臣 and 前田将克},
  title = {種々の先端的高速固相接合法により作製したアルミニウム合金同種・異種接合材の組織形成ならびに接合メカニズムの解明－軽金属奨学会平成27年度統合的先端研究の成果－},
  year = 2017,
}

@misc{CTT100734412,
  author = {原田陽平 and 熊井真次 and 竹永　健二　 and 斉藤　恒成　 and 久保寺　美憲　},
  title = {積層複合板への接合に用いるスタッドピン接合装置、及びスタッドピン接合方法},
  howpublished = {登録特許},
  year = 2020,
  month  = {},
  note   = {特願2015-038064(2015/02/27), 特開2016-159308(2016/09/05), 特許第6639790号(2020/01/07)}
}


@misc{CTT100711415,
  author = {熊井真次 and 原田陽平 and 井上　馨亮　 and 桜井　寛　 and 源島　文彦　 and 惣田　裕司 and 神戸　洋史　 and 林　憲司 and 大塚　真司},
  title = {成形性に優れたアルミニウム合金板},
  howpublished = {登録特許},
  year = 2019,
  month  = {},
  note   = {特願2014-217433(2014/10/24), 特開2016-084501(2016/05/19), 特許第6474582号(2019/02/08)}
}