@article{CTT100901763,
  author = {Moeko Yamazaki and Kazuhiro Ishikawa and TOSHIYUKI FUJII and Yoji Miyajima},
  title = {Effects of a preannealing process on the morphology of developed kinks in mille-feuille structured Cu/A5052 alloy fabricated by accumulative roll bonding: criteria for kink formation},
  journal = {Materials Transactions},
  year = 2023,
}

@article{CTT100901762,
  author = {Yoji Miyajima and Takuya Yamada and TOSHIYUKI FUJII},
  title = {Plastic instability criterion based on new necking parameters for Cu–Al, Cu–A5052, and Cu–A5083 roll-bonded laminated metal composites fabricated without post-annealing},
  journal = {Journal of Materials Processing Technology},
  year = 2022,
}

@article{CTT100798322,
  author = {Ryosuke Matsutani and Yoji Miyajima and Susumu Onaka},
  title = {Refinement and Coarsening of Grains Caused by Tensile-Shear Tests in Ultra-Fine Grained Cu Processed by Severe Plastic Deformation},
  journal = {Materials Transactions},
  year = 2019,
}

@article{CTT100798321,
  author = {高増宣仁 and 宮澤知孝 and 宮嶋陽司 and 足立大樹 and 尾中晋},
  title = {ARB加工した超微細粒Ni多結晶材のX線回折による弾性変形挙動の評価},
  journal = {日本金属学会誌},
  year = 2019,
}

@article{CTT100762997,
  author = {Yoji Miyajima and Takahiko Shinohara and Hiroki Adachi and Toshiyuki Fujii and Susumu Onaka and MASAHARU KATO},
  title = {Change in Electrical Resistivity of Pure Cu Processed by Accumulative Roll Bonding},
  journal = {Materials Transactions},
  year = 2018,
}

@article{CTT100748271,
  author = {Yoji Miyajima and Daisuke Kashioka and Nobuhiro Tsuji},
  title = {Ultimate Rolling Texture in Pure Aluminum Highly Deformed by  Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain  Subdivision},
  journal = {Materials Transactions},
  year = 2017,
}

@article{CTT100712446,
  author = {Yoji Miyajima and Satoshi Okubo and Tomotaka Miyazawa and Hiroki Adachi and Toshiyuki Fujii},
  title = {In-situ X-ray diffraction during tensile deformation of ultrafine-grained copper using synchrotron radiation},
  journal = {Philosophical Magazine Letters},
  year = 2016,
}

@article{CTT100715149,
  author = {鯵坂祐介 and 宮嶋陽司 and 尾中 晋},
  title = {冷間圧延による{111}<112> 銅単結晶の方位変化のSEM/EBSD解析},
  journal = {日本金属学会誌},
  year = 2016,
}

@article{CTT100712549,
  author = {Yoji Miyajima and Midori Uchiyama and Hiroki Adachi and Toshiyuki Fujii and Susumu Onaka and Masaharu Kato},
  title = {Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper},
  journal = {MATERIALS TRANSACTIONS},
  year = 2016,
}

@article{CTT100709303,
  author = {M.  Mito and H. Matsui and T. Yoshida and T. Anami and K. Tsuruta and H. Deguchi and T. Iwamoto and Daisuke Terada and Y. Miyajima and N. Tsuji},
  title = {Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation},
  journal = {Review of Scientific Instruments},
  year = 2016,
}

@article{CTT100708310,
  author = {Hayashi, K. and Osada, M. and Kurosu, Y. and Miyajima, Y. and Onaka, S.},
  title = {Log angles: Characteristic angles of crystal orientation given by the logarithm of rotation matrix},
  journal = {Materials Transactions},
  year = 2016,
}

@article{CTT100710829,
  author = {Hiroki Adachi and Y. Miyajima and M. Sato and Nobuhiro Tsuji},
  title = {Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique},
  journal = {Mater Trans},
  year = 2015,
}

@article{CTT100708318,
  author = {Yoji Miyajima and Satoshi Ookubo and Hiroki Abe and Hiroki Okumura and TOSHIYUKI FUJII and SUSUMU ONAKA and MASAHARU KATO},
  title = {Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing},
  journal = {Materials Characterization},
  year = 2015,
}

@article{CTT100710828,
  author = {Y. Miyajima and S. Komatsu and M.  Mitsuhara and Satoshi Hata and Hideharu Nakashima and Nobuhiro Tsuji},
  title = {Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium},
  journal = {Philos Mag},
  year = 2015,
}

@article{CTT100710827,
  author = {Hayashi Kunio and Osada Motoki and Kurosu Yuki and Yoji Miyajima and Onaka susumu},
  title = {Log Angles: Characteristic Angles of Crystal Orientation Given by the Logarithm of Rotation Matrix},
  journal = {JOURNAL OF THE JAPAN INSTITUTE OF METALS},
  year = 2015,
}

@article{CTT100682011,
  author = {Satoshi Ookubo and Hiroki Abe and Yoji Miyajima and TOSHIYUKI FUJII and SUSUMU ONAKA and MASAHARU KATO},
  title = {Effects of temperature and strain rate on plastic deformation of ultrafine-grained copper prepared by equal-channel angular pressing},
  journal = {MATERIALS TRANSACTIONS},
  year = 2014,
}

@article{CTT100670033,
  author = {Yoji Miyajima and Kotaro Iguchi and SUSUMU ONAKA and MASAHARU KATO},
  title = {Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding},
  journal = {Advances in Materials Science and Engineering},
  year = 2014,
}

@article{CTT100669959,
  author = {吉田暁海理 and 宮嶋陽司 and 尾中 晋},
  title = {圧延と繰り返し重ね接合圧延による銅単結晶の方位の回転と分裂},
  journal = {日本金属学会誌},
  year = 2014,
}

@article{CTT100669960,
  author = {Akari Yoshida and Yoji Miyajima and SUSUMU ONAKA},
  title = {Evolution of the spread of crystal orientation with plastic deformation in a cold-rolled Cu single crystal},
  journal = {Journal of Materials Science},
  year = 2014,
}

@article{CTT100661569,
  author = {Satoshi Ookubo and Yoji Miyajima and TOSHIYUKI FUJII and SUSUMU ONAKA and MASAHARU KATO},
  title = {Grain Size Variation during Low Temperature Creep and Tensile Deformation of  Ultrafine-Grained Copper},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100646627,
  author = {Yukito Nakanishi and Yoji MIYAJIMA and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Stability of Fatigued Dislocation Wall Structure in Coarse-Grained and Ultrafine-Grained Aluminum against Monotonic Tensile Deformation},
  journal = {Materials Transactions},
  year = 2013,
}

@article{CTT100646624,
  author = {Yoji MIYAJIMA and Hiroki Abe and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Effects of Si on mechanical properties and microstructure evolution in ultrafine-grained Cu-Si alloys processed by accumulative roll bonding},
  journal = {Acta Materialia},
  year = 2013,
}

@article{CTT100644478,
  author = {P.P.Bhattacharjee and Y.Takatsuji and Y.Miyajima and D.Terada and N.Tsuji},
  title = {Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}) Polycrystalline Nickel Sheet},
  journal = {Metallurgical and Materials Transactions A},
  year = 2012,
}

@article{CTT100754354,
  author = {Tomotaka Miyazawa and Yuta Ozawa and Miyajima and TOSHIYUKI FUJII and SUSUMU ONAKA and MASAHARU KATO},
  title = {Morphological and crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix},
  journal = {MATERIALS TRANSACTIONS},
  year = 2012,
}

@article{CTT100634204,
  author = {Yoji MIYAJIMA and Takashi ARAGAKI and Hiroki Adachi and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Retardation of Softening of Ultrafine-Grained Copper during Low Temperature Annealing under Uniaxial Tensile Stress},
  journal = {Materials Transactions},
  year = 2012,
}

@article{CTT100710815,
  author = {Y. Miyajima and Yann Tison and C. E.  Giusca and Vlad Stolojan and H. Watanabe and Hitoe Habuchi and S. J.  Henley and Jhon M. Shannon and S Ravi P Silva},
  title = {Probing the band structure of hydrogen-free amorphous carbon and the effect of nitrogen incorporation},
  journal = {Carbon},
  year = 2011,
}

@article{CTT100710835,
  author = {K. Kashihara and W. Ikushima and Y. Miyajima and Daisuke Terada and Nobuhiro Tsuji},
  title = {Change in Crystal Orientations of a {100} < 001 > Pure Aluminum Single Crystal during Accumulative Roll Bonding},
  journal = {Mater Trans},
  year = 2011,
}

@article{CTT100710816,
  author = {Y. Miyajima and S. J.  Henley and S Ravi P Silva},
  title = {Hydrogenated amorphous carbon and carbon nitride films deposited at low pressure by plasma enhanced chemical vapor deposition},
  journal = {Thin Solid Films},
  year = 2011,
}

@article{CTT100710834,
  author = {T. Miyazaki and Daisuke Terada and Y. Miyajima and C. Suryanarayana and R. Murao and Y. Yokoyama and K. Sugiyama and M. Umemoto and Y. Todaka and Nobuhiro Tsuji},
  title = {Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion},
  journal = {J Mater Sci},
  year = 2011,
}

@article{CTT100710836,
  author = {Y. Miyajima and M.  Mitsuhara and Satoshi Hata and Hideharu Nakashima and Nobuhiro Tsuji},
  title = {Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation},
  journal = {Mat Sci Eng a-Struct},
  year = 2010,
}

@article{CTT100710837,
  author = {Y. Miyajima and S. Y. Komatsu and M.  Mitsuhara and Satoshi Hata and Hideharu Nakashima and Nobuhiro Tsuji},
  title = {Change in electrical resistivity of commercial purity aluminium severely plastic deformed},
  journal = {Philos Mag},
  year = 2010,
}

@article{CTT100710817,
  author = {Y. Miyajima and M. Shkunov and S Ravi P Silva},
  title = {Amorphous carbon and carbon nitride bottom gate thin film transistors},
  journal = {Appl Phys Lett},
  year = 2009,
}

@article{CTT100710818,
  author = {Y. Miyajima and S. J.  Henley and G. Adamopoulos and Vlad Stolojan and E. Garcia-Caurel and B. Drevillon and Jhon M. Shannon and S Ravi P Silva},
  title = {Pulsed laser deposited tetrahedral amorphous carbon with high sp(3) fractions and low optical bandgaps},
  journal = {J Appl Phys},
  year = 2009,
}

@article{CTT100710819,
  author = {Y. Miyajima and G. Adamopoulos and S. J.  Henley and Vlad Stolojan and Yann Tison and E. Garcia-Caurel and B. Drevillon and Jhon M. Shannon and S Ravi P Silva},
  title = {Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen},
  journal = {J Appl Phys},
  year = 2008,
}

@article{CTT100710820,
  author = {Y. Miyajima and A. A. D. T.  Adikaari and S. J.  Henley and J. M. Shannon and S. R. P. Silva},
  title = {Electrical properties of pulsed UV laser irradiated amorphous carbon},
  journal = {Appl Phys Lett},
  year = 2008,
}

@article{CTT100710826,
  author = {Y. Miyajima and Jhon M. Shannon and S. J.  Henley and Vlad Stolojan and D. C.  Cox and S Ravi P Silva},
  title = {Electrical conduction mechanism in laser deposited amorphous carbon},
  journal = {Thin Solid Films},
  year = 2007,
}

@article{CTT100710825,
  author = {Paul C P  Watts and Natacha Mureau and Zhenni Tang and Yoji Miyajima and J David Carey and S Ravi P Silva},
  title = {The importance of oxygen-containing defects on carbon nanotubes for the detection of polar and non-polar vapours through hydrogen bond formation},
  journal = {Nanotechnology},
  year = 2007,
}

@article{CTT100710824,
  author = {Y. Miyajima and Shoji Nitta and S Ravi P Silva and D. A. Zeze},
  title = {Surface induced bulk modifications of amorphous carbon nitride films by post-deposition oxygen and hydrogen plasma treatment},
  journal = {Thin Solid Films},
  year = 2005,
}

@inproceedings{CTT100901757,
  author = {山崎萌子 and 石川和宏 and 藤居俊之 and 宮嶋陽司},
  title = {Cu/A5052異種金属積層材の焼鈍による変形挙動の変化},
  booktitle = {},
  year = 2022,
}

@inproceedings{CTT100901756,
  author = {山崎萌子 and 石川和宏 and 藤居俊之 and 宮嶋陽司},
  title = {fcc金属で構成される異種金属積層材の圧縮変形挙動に及ぼす焼鈍の影響},
  booktitle = {日本金属学会2022年秋期(第171回)講演大会講演概要},
  year = 2022,
}

@inproceedings{CTT100862871,
  author = {遠藤稜 and 鈴木敬康 and 宮澤知孝 and 藤居俊之 and 宮嶋陽司 and 萩原幸司},
  title = {長周期積層構造型マグネシウム合金における塑性変形挙動の温度とひずみ速度依存性},
  booktitle = {},
  year = 2021,
}

@inproceedings{CTT100862878,
  author = {藤居俊之 and 遠藤稜 and 宮澤知孝 and 宮嶋陽司 and 萩原幸司},
  title = {LPSO 相を含むマグネシウム合金における塑性変形挙動の温度とひずみ速度依存性},
  booktitle = {},
  year = 2021,
}

@inproceedings{CTT100774128,
  author = {村松星彦 and 宮嶋陽司 and 尾中晋},
  title = {ECAP加工で作製された超微細結晶粒AlのXRD測定による内部応力状態の評価},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774123,
  author = {宮嶋陽司 and 藤岡和毅 and 尾中晋},
  title = {超微細粒金属の変形中その場電気抵抗測定},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774127,
  author = {高増宣仁 and 宮嶋陽司 and 尾中晋},
  title = {引張変形中その場XRD測定による超微細粒Ni多結晶の弾塑性変形挙動の評価},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774129,
  author = {東海泰三 and 宮嶋陽司 and 尾中晋},
  title = {超微細粒Al-Fe合金のARB加工とその後の焼鈍に伴う力学的特性と電気的特性の変化},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774124,
  author = {服部夏実 and 宮嶋陽司 and 尾中晋},
  title = {Cu単結晶における圧痕周りでの結晶方位変化の位置依存性},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774125,
  author = {古谷玲 and 宮嶋陽司 and 尾中晋},
  title = {引張変形により延性破壊した銅単結晶試料表面の方位測定},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100774126,
  author = {松谷亮輔 and 宮嶋陽司 and 尾中晋},
  title = {ECAP加工で作製した超微細粒銅の引張変形時における単純せん断変形},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100761426,
  author = {松谷亮輔 and 宮嶋陽司 and 尾中晋},
  title = {大変形前後における超微細粒銅での同一領域での組織変化の観察},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100762971,
  author = {高増宣仁 and 小ヶ倉勇樹 and 宮嶋陽司 and 尾中晋},
  title = {超微細粒 Ni 多結晶材の集合組織と弾性変形挙動の評価},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100762970,
  author = {松谷亮輔 and 宮嶋陽司 and 尾中晋},
  title = {超微細粒銅の塑性変形に伴う結晶粒の形状と方位の変化},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100762969,
  author = {浜野航貴 and 宮嶋陽司 and 尾中晋},
  title = {双結晶銅における圧延による方位変化に及ぼす粒界と低温 焼鈍の影響},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100762972,
  author = {宮嶋陽司 and 小ヶ倉勇樹 and 尾中晋},
  title = {MWP 法および CMWP 法による超微細粒銅の引張試験中そ の場 XRD 測定結果の解析},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100753644,
  author = {宮嶋 陽司},
  title = {Al -Fe 合金の巨大ひずみ加工に伴う電気抵抗率，力学特性組織の変化},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100748268,
  author = {Yoji Miyajima},
  title = {Microstructural evolution of Cu-1.6mass% Fe alloy during accumulative roll bonding},
  booktitle = {},
  year = 2017,
}

@inproceedings{CTT100726225,
  author = {宮嶋陽司 and 福田晃二郎 and 足立大樹 and 尾中晋 and 加藤雅治},
  title = {巨大ひずみ加工を用いたアルミニウムの結晶粒超微細化に及ぼす鉄添加の効果},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100734461,
  author = {藤岡 和毅 and 宮嶋 陽司 and 尾中 晋},
  title = {純銅の室温引張変形にともなう転位密度化電気抵抗率測定よる評価},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100734460,
  author = {小ヶ倉勇樹 and 宮嶋陽司 and 尾中 晋},
  title = {種々のFCC金属超微細粒材についての引張変形中その場XRD測定},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100734462,
  author = {鯵坂祐介 and 宮嶋陽司 and 尾中 晋},
  title = {銅単結晶の冷間圧延による方位変化のSEM/EBSD解析},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100726224,
  author = {宮嶋陽司 and 海住亮太 and 尾中晋 and 加藤雅治},
  title = {超微細粒Al-Mg合金における温度77Kから323Kでの熱活性化変形過程},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100726223,
  author = {藤岡和毅 and 宮嶋陽司 and 尾中晋},
  title = {純銅の室温引張変形にともなう格子欠陥量変化の電気抵抗率を用いた検出},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100710846,
  author = {Yoji Miyajima},
  title = {Dislocation density of ultrafine grained Cu fabricated by severe plastic deformation},
  booktitle = {Abstract book},
  year = 2016,
}

@inproceedings{CTT100704997,
  author = {Miyajima yoji and Ueda Taro and Hiroki Adachi and Fujii Toshiyuki and SUSUMU ONAKA and Kato Masaharu},
  title = {Dislocation Density of FCC Metals Processed by ARB},
  booktitle = {},
  year = 2016,
}

@inproceedings{CTT100694577,
  author = {齋藤 実奈子 and 宮嶋 陽司 and 宮澤 知孝 and 藤居 俊之 and 加藤 雅治},
  title = {Fe析出粒子を含むCu合金の巨大ひずみ加工による組織変化},
  booktitle = {日本金属学会講演概要},
  year = 2014,
}

@inproceedings{CTT100694575,
  author = {大久保 智 and 宮澤 知孝 and 宮嶋 陽司 and 足立 大樹 and 藤居 俊之 and 尾中 晋 and 加藤 雅治},
  title = {超微細粒Cuにおける引張変形中の転位密度変化},
  booktitle = {日本金属学会講演概要},
  year = 2014,
}

@inproceedings{CTT100694578,
  author = {齋藤 遼太 and 冠 和樹 and 宮嶋 陽司 and 宮澤 知孝 and 藤居 俊之 and 加藤 雅治},
  title = {Cu-Ag 合金箔の繰り返し変形に伴う転位組織の発達過程},
  booktitle = {日本金属学会講演概要},
  year = 2014,
}

@inproceedings{CTT100710830,
  author = {P. P. Bhattacharjee and Y. Takatsuji and Y. Miyajima and Daisuke Terada and Nobuhiro Tsuji},
  title = {Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture},
  booktitle = {Mater Sci Forum},
  year = 2013,
}

@inproceedings{CTT100710833,
  author = {Hiroki Adachi and Y. Miyajima and A. Shibata and Daisuke Terada and Nobuhiro Tsuji},
  title = {Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation},
  booktitle = {Proceedings of the 13th International Conference on Aluminum Alloys (Icaa13)},
  year = 2012,
}

@inproceedings{CTT100646636,
  author = {Satoshi Hata and M. Shimizu and R. Akiyoshi and M. Mitsuhara and Ken-ichi Ikeda and Y. Miyajima and H. Nakashima and M. Kato},
  title = {Electron Tomography Observation of Dislocations Near a Symmetric Tilt Boundary in a Deformed Mo Bicrystal},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100646618,
  author = {Yukito Nakanishi and Yoji MIYAJIMA and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Stability of Fatigued Dislocation Structure in UFG Aluminum against Monotonic Tensile  Deformation},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100646619,
  author = {Yoji MIYAJIMA and Midori Uchiyama and TOSHIYUKI FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Effect of additional shear stress on texture evolution during ARB process},
  booktitle = {Materials Transactions},
  year = 2012,
}

@inproceedings{CTT100646621,
  author = {Yoji MIYAJIMA and Hiroki Abe and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Relationship between mechanical properties and microstructure in ultrafine-grained Cu-Si alloy processed by accumulative roll bonding},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100646622,
  author = {Satoshi Okubo and Yoji MIYAJIMA and Toshiyuki FUJII and Susumu ONAKA and Masaharu KATO},
  title = {Low temperature creep behavior of ultrafine-grained Cu},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100710832,
  author = {Nobuhiro Tsuji and Y. Takatsuji and Y. Miyajima and P. P. Bhattacharjee and Daisuke Terada},
  title = {Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel},
  booktitle = {Mater Sci Forum},
  year = 2011,
}

@inproceedings{CTT100710831,
  author = {Y. Miyajima and D. Kashioka and Nobuhiro Tsuji},
  title = {Texture evolution in ARB processed commercial purity aluminium},
  booktitle = {Mater Sci Forum},
  year = 2011,
}

@inproceedings{CTT100616415,
  author = {Akari Yoshida and Yoji Miyajima and TOSHIYUKI FUJII and SUSUMU ONAKA and MASAHARU KATO},
  title = {Microstructural evolution caused by accumulative roll-bonding of Cu (100)[001] single crystals},
  booktitle = {Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM-2010)},
  year = 2010,
}

@misc{CTT100843497,
  author = {宮嶋陽司 and 宮澤知孝},
  title = {ミニ特集「若手研究グループ活動報告」 No.3:多様な先端観察・測定法を用いた組織の定量と力学特性解析への適用},
  year = 2020,
}

@misc{CTT100794702,
  author = {宮嶋陽司 and 椿崎　仙市 and 小澤　雄太　 and 澤津橋　徹哉 and 嬉野　絢子　},
  title = {多層付着物測定装置および多層付着物測定方法},
  howpublished = {登録特許},
  year = 2023,
  month  = {},
  note   = {特願2017-117986(2017/06/15), 特開2019-002805(2019/01/10), 特許第7298834号(2023/06/19)}
}