@article{CTT100652308,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura},
  title = {Experimental analysis of earth pressure against rigid retaining walls under translation mode},
  journal = {Geotechnique},
  year = 2013,
}

@article{CTT100631765,
  author = {M.H. Khosravi and L. Tang and T. Pipatpongsa and J. Takemura and P. Doncommul},
  title = {Performance of counterweight balance on stability of undercut slope evaluated by physical modeling},
  journal = {International Journal of Geotechnical Engineering},
  year = 2012,
}

@article{CTT100630426,
  author = {M.H. Khosravi and T. Pipatpongsa},
  title = {Efficiency evaluation of implicit stress update algorithm for various forms of the original Cam-clay model},
  journal = {Theoretical and Applied Mechanics Japan},
  year = 2012,
}

@article{CTT100620772,
  author = {M.H. Khosravi and T. Pipatpongsa and A. Takahashi and J. Takemura},
  title = {Arch action over an excavated pit on a stable scarp investigated by physical model tests},
  journal = {Soils and Foundations},
  year = 2011,
}

@inproceedings{CTT100669351,
  author = {T. Pipatpongsa and J. Nakamura and C. Borely and M.H. Khosravi},
  title = {Numerical lower bound limit analyses of sand heap subjected to basal settlement with hysteretic reversals},
  booktitle = {},
  year = 2014,
}

@inproceedings{CTT100667850,
  author = {T. Pipatpongsa and L. Tang and M.H. Khosravi},
  title = {Active earth pressure distribution acting on rigid retaining walls undergoing horizontal translation},
  booktitle = {第49回地盤工学研究発表会発表講演集},
  year = 2014,
}

@inproceedings{CTT100666101,
  author = {T. Pipatpongsa and M.H. Khosravi and J. Takemura},
  title = {Physical model of a rigid retaining wall under translation mode and its variation of arch action in backfill material with interface friction},
  booktitle = {Proceedings of the the 8th International Conference on Physical Modelling in Geotechnics 2014},
  year = 2014,
}

@inproceedings{CTT100660199,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura},
  title = {Interface shearing resistance properties between moist silica sand and surface of materials investigated by direct shear apparatus},
  booktitle = {},
  year = 2013,
}

@inproceedings{CTT100652309,
  author = {T. Pipatpongsa and M.H. Khosravi and J. Takemura},
  title = {Physical modeling of arch action in undercut slopes with actual engineering practice to Mae Moh open-pit mine of Thailand},
  booktitle = {Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (ICSMGE18)},
  year = 2013,
}

@inproceedings{CTT100660196,
  author = {T. Techawongsakorn and T. Pipatpongsa and M.H. Khosravi and Cyril Borely},
  title = {Failure mechanism of undercut slope with planes of discontinuity},
  booktitle = {Proceedings of the 5th Multidisciplinary International Student Workshop},
  year = 2013,
}

@inproceedings{CTT100652342,
  author = {T. Techawongsakorn and H. Hirai and M.H. Khosravi and T. Pipatpongsa},
  title = {Slip mechanisms and interface shear strength between moist silica sand and acrylic plate},
  booktitle = {Proceedings of the 48th Japan National Conference on Geotechnical Engineering},
  year = 2013,
}

@inproceedings{CTT100652344,
  author = {L. Tang and M.H. Khosravi and T. Pipatpongsa and J. Takemura},
  title = {Nonlinear and hysteretic responses of pressure gauges in a sand chamber due to loading and unloading processes},
  booktitle = {Proceedings of the 48th Japan National Conference on Geotechnical Engineering},
  year = 2013,
}

@inproceedings{CTT100652312,
  author = {H. Hirai and M.H. Khosravi and T. Pipatpongsa},
  title = {Geometrical shape of arch formed by collapse of undercut slope},
  booktitle = {第62回理論応用力学講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100652307,
  author = {M.H. Khosravi and J. Takemura and T. Pipatpongsa},
  title = {Centrifugal modeling of undercut slopes subjected to pseudo-static loading},
  booktitle = {The 10th CUEE conference proceedings},
  year = 2013,
}

@inproceedings{CTT100657156,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura and P. Doncommul},
  title = {Investigation on strength properties of lignite at the Mae-Moh open-pit mine},
  booktitle = {Proceedings of the 5th Thailand-Japan International Academic Conference 2012 (5th TJIA 2012)},
  year = 2012,
}

@inproceedings{CTT100657166,
  author = {M.H. Khosravi and A. Majdi and J. Takemura and T. Pipatpongsa},
  title = {A comparison of rotary and ODEX drilling methods in alluvial deposits of Kheirabad earth dam of Iran for grouting purposes},
  booktitle = {第9回地盤工学会関東支部発表会発表講演集},
  year = 2012,
}

@inproceedings{CTT100644723,
  author = {T. Pipatpongsa and MOHAMMAD HOSSEIN KHOSRAVI and JIRO TAKEMURA and Dionysios STATHAS and Cheowchan Leelasukseree},
  title = {Cohesive arch action in laterally confined block of moist sand placing on an inclined bedding plane},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100644722,
  author = {C. Leelasukseree and T. Pipatpongsa and M. H. Khosravi and N. Mavong},
  title = {Stresses and a failure mode from physical and numerical models of undercut slope lying on inclined bedding plane},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100640722,
  author = {T. Pipatpongsa and M.H. Khosravi and Dionysios STATHAS and JIRO TAKEMURA},
  title = {Effect evaluation of tensile strength to a critical width of undercut slope aligned with a bedding plane},
  booktitle = {Proceedings of the 47th Japan National Conference on Geotechnical Engineering},
  year = 2012,
}

@inproceedings{CTT100635449,
  author = {C. Leelasukseree and N. Mavong and M. H. Khosravi and T. Pipatpongsa},
  title = {Physical and numerical models of undercut slope lying on steeply inclined bedding plane},
  booktitle = {Proceeding of the 17th National Convention on Civil Engineering},
  year = 2012,
}

@inproceedings{CTT100657152,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura},
  title = {Pseudo-static analysis of passive arch action in undercut slopes against earthquake},
  booktitle = {Joint Conference Proceedings: The 9th International Conference on Urban Earthquake Engineering (9CUEE) & 4th Asia Conference on Earthquake Engineering (4ACEE)},
  year = 2012,
}

@inproceedings{CTT100620374,
  author = {M. H. Khosravi and L. Tang and T. Pipatpongsa and J. Takemura and P. Doncommul},
  title = {Physical model tests of an undercut slope on moist sand stabilized by counterweight balance},
  booktitle = {Proceedings of the International Conference on Advances in Geotechnical Engineering (ICAGE 2011)},
  year = 2011,
}

@inproceedings{CTT100631803,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura and N. Mavong and P. Doncommul},
  title = {Investigation on shear strength of shale at the Mae Moh open-pit mine},
  booktitle = {Proceedings of the 4th Thailand-Japan International Academic Conference},
  year = 2011,
}

@inproceedings{CTT100630760,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura and P. Doncommul},
  title = {Alternative coal mining method with lesser energy and environmental load},
  booktitle = {Abstract proceedings},
  year = 2011,
}

@inproceedings{CTT100648570,
  author = {M.H. Khosravi and T. Pipatpongsa and J. Takemura and P. Doncommu},
  title = {Alternative coal mining method with lesser energy and environmental load},
  booktitle = {Proceedings of the 3rd Multidisciplinary International Student Workshop},
  year = 2011,
}

@inproceedings{CTT100619693,
  author = {M.H. Khosravi and S. Kitakata and T. Pipatpongsa and J. Takemura},
  title = {Experimental analysis of failure zone behind retaining walls under active translation mode},
  booktitle = {46th Japan National Conference on Geotechnical Engineering},
  year = 2011,
}

@inproceedings{CTT100619695,
  author = {S. Thay and M.H. Khosravi and T.  Pipatpongsa and A. Takahashi},
  title = {Weight transmission in planar sand ditch stored in a rectangular bin},
  booktitle = {第46回地盤工学研究発表会講演集},
  year = 2011,
}

@inproceedings{CTT100616733,
  author = {M.H. Khosravi and T. Pipatpongsa},
  title = {Stress update algorithm for the original Cam-clay model considering the form of yield function on its performance},
  booktitle = {第60回理論応用力学講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100612998,
  author = {M.H. Khosravi and Oliver James Carlton and T. Pipatpongsa and J. Takemura and P. Doncommul},
  title = {A preliminary study of moving-pit excavation for environmental load reduction in open-cast mining},
  booktitle = {Proceedings UP ICE Centennial Conference on Harmonizing Infrastructure with the Environment featuring the 3rd ASEAN Civil Engineering Conference and the 3rd ASEAN Environmental Engineering Conference},
  year = 2010,
}

@inproceedings{CTT100612987,
  author = {M.H. Khosravi and Y. Ishii and J. Takemura and T. Pipatpongsa},
  title = {Centrifuge model test on compacted sand slopes undercut by in-flight excavator},
  booktitle = {Proceedings of Geo-Kanto2010},
  year = 2010,
}

@inproceedings{CTT100608693,
  author = {C. Leelasukseree and M.H. Khosravi and T. Pipatpongsa and N. Mavong},
  title = {Investigation of load transfer mechanisms due to undercutting at toe of slope resting on sliding plane by using 3D elastic analyses},
  booktitle = {Proceedings of the 12th International Summer Symposium},
  year = 2010,
}

@inproceedings{CTT100608689,
  author = {T. Pipatpongsa and Cheowchan Leelasukseree and M.H. Khosravi and Narongsak Mavong},
  title = {Arch action in granular media placing along an oblique plane across an undercut pit examined by computer simulations},
  booktitle = {JSCE Annual Meeting 2009},
  year = 2010,
}

@inproceedings{CTT100608456,
  author = {M.H. Khosravi and T. Pipatpongsa},
  title = {Arching effect in retaining walls under translation mode with surcharge},
  booktitle = {Proceedings of the 45th National Conference of Japan Geotechnical Engineering},
  year = 2010,
}

@inproceedings{CTT100605257,
  author = {T. Pipatpongsa and M.H. Khosravi and Cheowchan Leelasukseree and Narongsak Mavong and J. Takemura},
  title = {Slope failures along oblique plane due to sequential removals of propping portion in physical model tests},
  booktitle = {},
  year = 2010,
}

@inproceedings{CTT100592407,
  author = {T. Pipatpongsa and M.H. Khosravi and Prajuab Doncommul and Narongsak Mavong},
  title = {Excavation problems in Mae Moh lignite open-pit mine of Thailand},
  booktitle = {Geo-Kanto2009},
  year = 2009,
}

@inproceedings{CTT100592515,
  author = {T. Pipatpongsa and M.H. Khosravi and S. Heng},
  title = {Granular arch shapes under criterion of silo effect},
  booktitle = {Proceedings of the APCMM2009},
  year = 2009,
}

@inproceedings{CTT100592408,
  author = {M.H. Khosravi and T. Pipatpongsa and Cheowchan Leelasukseree and P. Wattanachai},
  title = {Failure mechanisms in arched excavation of sloped earth using model test},
  booktitle = {Geo-Kanto2009},
  year = 2009,
}

@inproceedings{CTT100592049,
  author = {T. Pipatpongsa and M.H. Khosravi and Shinichi Kanazawa and Suched Likitlersuang},
  title = {Effect of the modified Cam-clay yield function's form on performance of the Backward-Euler stress update algorithm},
  booktitle = {Proceedings of the 22nd KKCNN symposium on Civil Engineering},
  year = 2009,
}

@inproceedings{CTT100591059,
  author = {M. H. Khosravi and T. Pipatpongsa and S. Kanazawa and A. Iizuka},
  title = {Effect of yield function’s form on performance of the backward-Euler stress update algorithm for the original cam-clay model},
  booktitle = {Proceedings of the 11th International Summer Symposium, JSCE},
  year = 2009,
}

@inproceedings{CTT100588530,
  author = {M.H. Khosravi and T. Pipatpongsa and A. Majdi and H. Ohta},
  title = {Critical grouting pressure prediction in Iran Kheirabad rock mass based on fracture mechanics approach},
  booktitle = {The Proceedings of the 44th National Conference of Japan Geotechnical Engineering},
  year = 2009,
}

@inproceedings{CTT100576877,
  author = {T. Pipatpongsa and MOHAMMAD HOSSEIN KHOSRAVI and H. Ohta},
  title = {Backward-Euler stress update algorithm for the original Cam-clay model with  vertex singularity},
  booktitle = {Prediction and Simulation Methods for Geohazard Mitigation},
  year = 2009,
}

@inproceedings{CTT100567252,
  author = {MOHAMMAD HOSSEIN KHOSRAVI and T. Pipatpongsa and H. Ohta},
  title = {Interpretation of process of Ko-consolidation by randomized inhomogeneous strains},
  booktitle = {Proceedings of the 1st Thailand-Japan International Academic Conference (1st TJIA 2008)},
  year = 2008,
}

@inproceedings{CTT100567245,
  author = {MOHAMMAD HOSSEIN KHOSRAVI and A. Majdi and T. Pipatpongsa and H. Ohta},
  title = {A fracture mechanics approach for hydraulic fracturing in situ stress measurements},
  booktitle = {The 10th JSCE International Summer Symposium},
  year = 2008,
}

@inproceedings{CTT100567242,
  author = {MOHAMMAD HOSSEIN KHOSRAVI and A. Majdi and T. Pipatpongsa and H. Ohta},
  title = {Critical pressure prediction in rock grouting by using the fracture mechanics principles},
  booktitle = {第63回年次学術講演会公演概要集},
  year = 2008,
}