論文

• Takashi AKATSU, Shingo NUMATA, Michiyuki YOSHIDA, Yutaka SHINODA, Fumihiro WAKAI. Indentation Size Effect on the Hardness of Zirconia Polycrystals, Fracture Mechanics of Ceramics, Vol. 14, pp. 13-20, 2005.
• Takashi AKATSU, Kenji SAITO, Yasuhiro TANABE, Eiichi YASUDA:. Combined Mode-I/II Fracture of Ceramics with Crack-Face Grain/Whisker Bridging, Philosophical Magagine A, Vol. 83, pp. 745-764, 2003.
• Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Crack-Bridging Processes and Fracture Resistance of a Discontinuous Fiber-Reinforced Brittle Matrix Composite, Journal of Materials Research, Vol. 14, No. 4, pp. 1316-1324, 1999.
• T. Akatsu, S. Numata, Y. Shinoda, F. Wakai. Effect of elastic deformation of a point-sharp indenter on nanoindetntation behavior, Materials, Vol. 10, 270, Oct. 2017.
• Fumihiro Wakai, Kouta Katsura, Shun Kanchika, Yutaka Shinoda, Takashi Akatsu, Kazunari Shinagawa. Sintering force behind the viscous sintering of two particles, Acta Materialia, Vol. 109, pp. 292-299, Apr. 2016.
• Gaku Okuma, Daiki Kadowaki, Yutaka Shinoda, Takatshi Akatsu, Olivier Guillon, Fumihiro Wakai. Determination of the size of representative volume element for viscous sintering, Journal of Ceramic Society Japan, Vol. 124, pp. 421-425, Apr. 2016.
• Y. Shinoda, R. Raj, Y. Minoguchi, T. Akatsu, F. Wakai. Hafnia-silicon carbide nano composites II: Measurements of the residual stress, Journal of European Ceramic Society, Vol. 36, pp. 937-942, Jan. 2016.
• Kimiko Yoshida, Fumihiro Wakai, Norimasa Nishiyama, Risako Sekine, Yutaka Shinoda, Takashi Akatsu, Takashi Nagoshi, Masato Sone. Large increase in fracture resistance of stishovite with crack extension less than one micrometer, Scientific Reports, Vol. 5, 10993, June 2015.
• Raayaa Wananuruksawong, YUTAKA SHINODA, TAKASHI AKATSU, FUMIHIRO WAKAI. High-strain-rate superplasticity in nanocrystalline silicon nitride ceramics under compression, Scripta Mater., Vol. 103, pp. 22-25, May 2015.
• K. Katsura, Y. Shinoda, T. Akatsu, F. Wakai. Sintering force behind shape evolution by viscous flow, Journal of the European Ceramic Society, Vol. 35, pp. 1119-1122, Jan. 2015.
• R. Wananuruksawong, Y. Shinoda, T. Akatsu, F. Wakai. Evolution of microstructure and intergranular glass chemistry in plastically deformed nanocrystalline Si3N4 ceramics, Journal of the American Ceramic Society, Vol. 98, No. 1, pp. 178-185, Jan. 2015.
• T. Akatsu, S. Numata, T. Demura, Y. Shinoda, F. Wakai. Representative indentation elastic modulus evaluated by unloading of nano indentation made with a point sharp indenter, Mechanics of Materials, Vol. 83, pp. 66-71, Jan. 2015.
• Jun-Woo Lee, TAKASHI AKATSU, Shunkichi UENO. Fabrication of Porous Ceramics with Bi-modal Pores in Shape by Unidirectional Solidification of Aqueous Slurry Containing CO2 Gas, Journal of the Technical Association of Refractories, Japan, Vol. 34, No. 4, p. 226-230, Oct. 2014.
• Takamasa ONOKI, Y. Shinoda, T. Akatsu, F. Wakai. New processing method for tungsten carbide nano-crystalline particles and nano structural carbon via polyacrylonitrile gasification, Journal of Ceramic Society Japan, Vol. 122, pp. 570-573, Mar. 2014.
• TAKASHI AKATSU, Yamada Yuji, Yasuto Hoshikawa, Takamasa ONOKI, YUTAKA SHINODA, FUMIHIRO WAKAI. Multifunctional porous titanium oxide coating with apatite forming ability and photocatalytic activity on a titaniumsubstrate formed by plasma electrolytic oxidation, Materials Science and Engineering C, Elsevier, 33, 4871-4875, Dec. 2013.
• TAKASHI AKATSU, Shin Nakanishi, yasuhiro tanabe, FUMIHIRO WAKAI, EIICHI YASUDA. Toughening enhanced at elevated temperatures in an alumina/zirconia dual-phase matrix composite reinforced with silicon carbide whiskers, Journal of the European Ceramic Society, Elsevier, 33, 3157-3163, Dec. 2013.
• Raayaa Wananuruksawong, YUTAKA SHINODA, TAKASHI AKATSU, FUMIHIRO WAKAI. Effect of CaO Addition on Compressive Deformation of Silicon Nitride Ceramic with Y-Mg-Si-O-N Glassy System, International Journal of Applied Ceramic Technology, The American Ceramic Society, 10, 5, 756-763, May 2013.
• TAKASHI AKATSU, Takashiro KATO, Yutaka SHINODA, Fumihiro WAKAI. Thermal barrier coating made of porous zirconium oxide on a nickel-based single crystal superalloy formed by plasma electrolytic oxidation, Surface & Coatings Technology, Elsevier, Volume 223, No. 25, p. 47-51, Feb. 2013.
• F. Wakai, Y. Shinoda, T. Akatsu. Tensor-Virial Equation for Deformation of a particle in viscous sintering, Journal of the American Ceramic Society, Vol. 95, No. 9, pp. 2785-2787, Sept. 2012.
• 竹本喜昭, 赤津隆, 榎本尚也, 橋田浩, 林靜雄, 田中享二. 超音波振動を用いた再生細骨材製造プロセス, 日本建築学会構造系論文集, Vol. 77, No. 677, p. 999-1005, July 2012.
• YASUTO HOSHIKAWA, TAKAMASA ONOKI, MASARU AKAO, TAKASHI AKATSU, YASUHIRO TANABE, EIICHI YASUDA. Blood compatibility and tissue responsiveness on simple and durable methylsiloxane coating, Materials Science and Engineering C, ELSEVIER, Vol. 32, p. 1627-1631, Apr. 2012.
• Eiichi Yasuda, Asao Oya, Shinya Komura, Shigeki Tomonoh, Takashi Nishizawa, Shinsuke Nagata, Takashi Akatsu. Single domain oval carbon nanofiber prepared from a polymer blend process, Carbon, Elsevier, Vol. 50, p. 1432-1434, Mar. 2012.
• Fumihiro Wakai, Hirotaka Fukutome, Norihiro Kobayashi, Tomoyuki Misaki, Yutaka Shinoda, Takashi Akatsu, Masato Sone, Yakichi Higo. Direct observation of sintering mechanics of a single grain boundary, Acta Materialia, Vol. 60, pp. 507-516, Feb. 2012.
• Kousuke UMINO, Shuichi WAKAYAMA, Takenobu SAKAI, Yuka UMEHARA, TAKASHI AKATSU. Mechanical Properties of CNF Reinforced Ceramic Composites Sintered with SPS Technique, Journal of Solid Mechanics and Materials Engineering, The Japan Society of Mechanical Engineers, Vol. 5, No. 12, p. 866-872, Dec. 2011.
• Kazumasa Nakamura, Hiroki Morooka, Yasuhiro Tanabe, Eiichi Yasuda, Takashi Akatsu, Hitoshi Shindo. Surface oxidation and/or corrosion behavior of glass-like carbon in sulfuric and nitric acids, and in aqueous hydrogen peroxide, Corrosion Science, Vol. 53, 4010-4013, Oct. 2011.
• T Akatsu, T Kato, Y Shinoda, F Wakai. Zirconia based ceramic coating on a metal with plasma electrolytic oxidation, Materials Science and Engineering, IOP Publishing Ltd, Vol. 18, Oct. 2011.
• 竹本喜昭, 新島瞬, 榎本尚也, 赤津隆, 橋田浩, 田中享二. 廃硫酸による廃コンクリート微粉末の処理プロセスの開発, 日本建築学会構造系論文集, Vol. 75, No. 656, p. 1755-1763, Oct. 2010.
• FUMIHIRO WAKAI, TAKASHI AKATSU. Anisotropic viscosities and shrinkage rates in sintering of particles arranged in a simple orthorhombic structure, Acta Materialia, Vol. 58, pp. 1921-1929, Feb. 2010.
• 竹本喜昭, 新島瞬, 榎本尚也, 赤津隆, 橋田浩, 田中享二. 骨材除去後の廃コンクリート微粉末と鋼材錆び除去後の廃塩酸からの素材分離, 日本建築学会構造系論文集, 日本建築学会, Vol. 75, No. 647, pp. 1-6, Jan. 2010.
• Yasuto HOSHIKAWA, Eiichi YASUDA, Takashi AKATSU, T. ONODA, Naota SUGIYAMA, Nobuhiro MATSUSHITA, Sl. ZHU, XinMing WANG, Akihisa INOUE. Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating, Materials Transactions, Vol. 60, No. 6, pp. 1334-1339, June 2009.
• Shunkichi Ueno, Takashi Akatsu, Hideo Nakajima. Fabrication of porous magnesium spinel (MgAl2O4) with cylindrical pores by unidirectional solidification, Journal of Physics: Conference Series, Vol. 165, 2009.
• S. Ueno, T. Akatsu, H. Nakajima. Fabrication of Porous Magnesium Spinel with Directional Pores by Unidirectional Solidification, Ceramics International, Vol. 35, pp. 2469–2473, 2009.
• Yutaka Shinoda, Yuki Yanagisawa, Takashi Akatsu, Fumihiro Wakai, Hidetoshi Fujii. Development of Creep-Resistant Tungsten Carbide Copper Cemented Carbide, Materials Transactions, Vol. 50, No. 6, pp. 1250-1254, 2009.
• Kazumasa NAKAMURA, Yoshikazu TERANISHI, Yukako WADA, Ko-ichiro TANO, Isao NAKAMURA, Yasuhiro TANABE, Eiichi YASUDA, Takashi AKATSU. Surface modification behaviors of glass-like carbon by oxygen ion implantation, Nuclear Instruments and Methods in Physics Research B, vol. 267, pp. 1642-1644, 2009.
• 竹本 喜昭, 橋田 浩, 黒田 泰弘, 榎本尚也, 赤津隆, 田中享二. 骨材除去後の廃コンクリート微粉末からの素材分離, 日本建築学会構造系論文集, 日本建築学会, Vol. 73, No. 633, p. 1891-1898, Nov. 2008.
• Kentarou Chihara, Daisuke Hiratsuka, Yutaka Shinoda, Takashi Akatsu, Fumihiro Wakai, Jyunichi Tatami, Katsutoshi Komeya. High-temperature compressive deformation of b-SiAlON polycrystals containing minimum amount of intergranular glass phase, Materials Science & Engineering B, Vol. 148, pp. 203-206, Apr. 2008.
• Takuya Tokiyama, Yutaka Shinoda, Takashi Akatsu, Fumihiro Wakai. Enhancement of high-temperature deformation in fine-grained silicon carbide with Al doping, Materials Science & Engineering B, Vol. 148, pp. 261-264, Apr. 2008.
• Y. Shinoda, T. Akatsu, F. Wakai. Integrated molding of nanocrystalline tungsten carbide powder with stainless steel, Mater. Sci. and Eng. B, Vol. 148, pp. 145-148, Feb. 2008.
• Eiichi Yasuda, Takashi Enami, Nobuyuki Hoteida, Leslie Joy Lanticse-Diaz, Yasuhiro Tanabe, Takashi Akatsu. Carbon Alloys - Multi-functionalization, Materials Science and Engineering B, No. 148, pp. 7-12, Jan. 2007.
• Kentaro CHIHARA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Superplastic Flow of Silicon Nitride-Based Nanocomposite at High Strain Rates, Material Science Forum, Vol. 551-552, pp. 597-600, 2007.
• Michiyuki Yoshida, Yutaka Shinoda, Takashi Akatsu, FUMIHIRO WAKAI. Development of Nanoceramics; Application to Diffusion Bonding, Ceramic Transactions, Vol. 198, pp. 85-90, 2007.
• Eiichiro NARIMATSU, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Effect of Chemical Composition of Intergranular Glass on Superplastic Deformation of beta-Silicon Nitride, Key Engineering Materials, Vol. 317-318, pp. 399-402, 2006.
• Fumihiro WAKAI, Yutaka SHINODA, Takashi AKATSU. Quasi-Equilibrium Sintering of Particle Clusters Containing Bernal Holes, International Journal of Materials Research, Vol. 97, pp. 670-675, 2006.
• Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Deformation Behavior of SiO2 Doped Nanocrystalline Monoclinic Zirconia at Low Temperatures, Key Engineering Materials, Vol. 317-318, pp. 433-436, 2006.
• Eiichiro NARIMATSU, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Effect of Chemical Composition of Intergranular Glass on Superplastic Compressive Deformation of beta-Silicon Nitride, Journal of the Europian Ceramic Society, Vol. 26, pp. 1069-1074, 2006.
• Kentaro CHIHARA, Yutaka SHINODA, Takashi AKATSU, Fumihoro WAKAI. Superplastic Deformation of Silicon Nitride Nanocomposite at High Strain Rates, Key Engineering Materials, Vol. 317-318, pp. 403-406, 2006.
• Fumihiro WAKAI, Yutaka SHINODA, Takashi AKATSU. Evaluation of Thermal Stability of Porous Materials by Sintering Stress, Key Engineering Materials, Vol. 317-318, pp. 683-688, 2006.
• Fumihiro WAKAI, Takashi AKATSU, Yutaka SHINODA. Shrinkage and Disappearance of a Closed Pore in Sintering of Particle Cluster, Acta Materialia, Vol. 54, pp. 793-805, 2006.
• 上野俊吉, 高田智司, 赤津隆, 安田榮一, 和久芳春. MGCの内部摩擦, 金属, Vol. 76, pp. 635-639, 2006.
• F. Wakai, M. Yoshida, Y. Shinoda, T. Akatsu. Coarsening and grain growth in sintering of two particles af different size, Acta Materialia, Vol. 53, pp. 1361-1371, 2005.
• Fumihiro WAKAI, Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU. Coarsening and Grain Growth in Sintering of Two Particles of Different Sizes, Acta Materialia, Vol. 52, pp. 1361-1371, 2005.
• Mototsugu SAKAI, Takashi AKATSU, Shingo NUMATA. Finite Element Analysis for Conical Indentation Unloading, Acta Materialia, Vol. 52, pp. 2359-2364, 2004.
• Takashi AKATSU, Yuji KAWAKAMI, Yasuhiro TANABE, Eiichi YASUDA, Katsunori YAMADA, Nobuo KAMIYA. An Irreversible Disappearance of the Mechanical Loss Peak of an Yttria-Doped Silicon Nitride, Journal of Meterials Research, Vol. 19, pp. 2532-2535, 2004.
• Michiyuki YOSHIDA, YUTAKA SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Superplasticity-like deformation of nanocrystalline monoclinic zirconia at elevated temperatures, Journal of the American Ceramic Society, Vol. 87, pp. 1122-1125, 2004.
• Fumihiro WAKAI, Takashi AKATSU, Yutaka SHINODA. Dynamics of Grain Boundary Networks in Superplasticity, Materials Science Forum, Vol. 447-448, pp. 49-54, 2004.
• Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Effect of Yttrium on the Deformation of Nanocrystalline ZrO2 at elevated temperatures, Materials Science Forum, Vol. 447-448, pp. 359-364, 2004.
• 松下純一, 北嶋暁子, 赤津　隆, 安田榮一, Kwang Bo SHIM, Keun Ho Auh, 新原皓一. 高温耐酸化性保護膜を有するC/Cコンポジットの作製, 粉体および粉末冶金, Vol. 51, pp. 113-117, 2004.
• E. Hiyoshi, Y. Shinoda, T. Akatsu, F. Wakai. Effect of Temperature and Chemical Composition of Intergranular Glass on Dihedral Angle of Glass-Doped 3Y-TZP, J. Ceram. Soc. Jpn., Vol. 112, No. 12, pp. 661-664, 2004.
• F. Wakai, Y. Shinoda, T. Akatsu. Methods to calculate sintering stress of porous materials in equilibrium, Acta Materialia, Vol. 52, No. 11, pp. 5621-5631, 2004.
• M. Yoshida, Y. Shinoda, T. Akatsu, F. Wakai. Analysis of the Deformation Behavior in Nanocrystaline Y2O3 Stabilized tetragonal ZrO2, Trans. Mater. Res. Soc. Japan, Vol. 29, No. 8, pp. 3581-84, 2004.
• M. Yoshida, Y. Shinoda, T. Akatsu, F. Wakai. Superplasticity-like Deformation of Nanocrystalline Monoclinic Zirconia at Elevated Temperatures, J. Am. Ceram. Soc., Vol. 87, No. 6, pp. 1122-1125, 2004.
• F. Wakai, T. Akatsu, Y. Shinoda. Dynamics of grain boundary networks in superplasticity, Materials Science Forum, pp. 49-54, 2004.
• M. Yoshida, Y. Shinoda, T. Akatsu, F. Wakai. Effect of yttrium on the deformation of nanocrystalline ZrO2 at elevated temperatures, Materials Science Forum, pp. 359-364, 2004.
• Eiji HIYOSHI, YUTAKA SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Effects of temperature and chemical composition of intergranular glass on dihedral angle of glass-doped 3Y-TZP, J. Ceram. Soc. Japan, Vol. 112, pp. 661-664, 2004.
• Yutaka SHINODA, Michiyuki YOSHIDA, Takashi AKATSU, Fumihiro WAKAI. Effect of Amount of Boron Doping on Compression Deformation of Fine-Grained Silicon Carbide at Elevated Temperature, Journal of the American Ceramic Society, Vol. 87, pp. 1525-1529, 2004.
• Yutaka SHINODA, Michiyuki YOSHIDA, Takashi AKATSU, Fumihiro WAKAI. Compression Deformation Mechanism of Silicon Carbide: I, Fine-Grained Boron- and Carbon-Doped b-Silicon Carbide Fabricated by Hot Isostatic Pressing, Journal of the American Ceramic Society, Vol. 87, pp. 1919-1926, 2004.
• Eiji HIYOSHI, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Effects of Temperature and Chemical Composition of Intergranular Glass on Dihedral Angle of Glass-Doped 3Y-TZP, Journal of the Ceramic Society of Japan, Vol. 112, pp. 661-664, 2004.
• Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Analysis of the Deformation Behavior in Nanocrystalline Y2O3 Stabilized Tetragonal ZrO2, Transactions of the Materials Research Society of Japan, Vol. 29, pp. 3581-3584, 2004.
• Takashi AKATSU, Shin NAKANISHI, Yasuhiro TANABE, Eiichi YASUDA. Stress-Induced Transformation Toughening of an Alumina/Zirconia Dual-Phase Composite, Philosophical Magazine, Vol. 84, pp. 3741-3754, 2004.
• Fumihiro WAKAI, YUTAKA SHINODA, TAKASHI AKATSU. Methods to calculate sintering stress of porous materials in equilibrium, Acta Materialia, Vol. 52, pp. 5621-5631, 2004.
• Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Superplasticity-like Deformation of Nanocrystalline Monoclinic ZrO2 at Elevated Temperatures; 87, 1122-1125 (2004), Journal of the American Ceramic Society, Vol. 87, pp. 1122-1125, 2004.
• Keisuke FUJII, Eiichi YASUDA, Takashi AKATSU, Yasuhiro TANABE. Effect of Characteristics of Materials on Fracture Behavior and Modeling Using Graphite-Related Materials with a High-Velocity Steel Sphere, International Journal of Impact Engineering, Vol. 28, pp. 985-999, 2003.
• Mototsugu SAKAI, Takashi AKATSU, Shingo NUMATA, Kenji MATSUDA. Linear Strain Hardening in Elastoplastic Indentation Contact, Journal of Meterials Research, Vol. 18, pp. 2087-2096, 2003.
• 田邊靖博, 石黒陽介, 赤津　隆, 安田榮一. C/C複合材料ならびにチラノヘックスの剪断強度の負荷速度依存性, 炭素, Vol. 202, pp. 80-82, 2002.
• 福島　学, 安田榮一, Larit M. Manocha, Satich M.Manocha, 中村義之, 赤津　隆, 田邊靖博. Synthesis via Pyrolysis and Characterization of Si-C-O Ceramics from 1,4-Butanediol and Methyltriethoxysilane, Journal of the Ceramic Society of Japan, Vol. 110, pp. 1044-1047, 2002.
• Michiyuki YOSHIDA, Yutaka SHINODA, Takashi AKATSU, Fumihiro WAKAI. Deformation of Monoclinic ZrO2 Polycrystals and Y2O3-Stabilized Tetragonal ZrO2 Polycrystals Below the Monoclinic-Tetragonal Transition Temperature, Journal of the American Ceramic Society, Vol. 85, pp. 2834-2836, 2002.
• Naoya MIYAJIMA, Satoshi DOHI, Takashi AKATSU, Takakazu YAMAMOTO, Eiichi YASUDA, Yasuhiro TANABE. Srabilization and carbonization behavior of pitch-model compounds treated with iodine or bromine, Carbon, Vol. 40, pp. 1533-1539, 2002.
• M. Yoshida, Y. Shinoda, T. Akatsu, F. Wakai. Deformation of Monoclinic ZrO2 Polycrystals and Y2O3-Stabilized Tetragonal ZrO2 Polycrystals below the MonoclinicﾐTetragonal Transition Temperature, J. Am. Ceram. Soc., Vol. 85, No. 11, pp. 2834-36, 2002.
• Michiyuki YOSHIDA, YUTAKA SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Deformation of Monoclinic ZrO₂ Polycrystals and Y₂O₃-Stabilized Tetragonal ZrO₂ Polycrystals below the Monoclinic-Tetragonal Transition Temperature, J. Am. Ceram. Soc., Vol. 85, No. 11, pp. 2834-2836, 2002.
• Junichi MATSUSHITA, Takashi AKATSU, Eiichi YASUDA, Koichi NIIHARA. Fabrication and Properties of SiB6-B4C-SiC Composites, Materials Processing for Properties and Performance, pp. 195-199, 2002.
• 田邊靖博, 石井　元, 中西　真, 赤津　隆, 安田榮一. ダブルノッチ試験片を用いた高温圧縮層間剪断試験用黒鉛製治具の開発, 炭素, Vol. 203, pp. 117-119, 2002.
• 高田智司, 上野俊吉, 河上祐司, 赤津隆, 田邊靖博, 安田榮一, 和久芳春. Al2O3/YAG共晶一方向凝固材の微細構造と高温内部摩擦, Journal of the Ceramic Society of Japan, Vol. 109, No. 6, pp. 561-564, 2001.
• Yasuhiro TANABE, Takashi AKATSU, Keisuke FUJII, Eiichi YASUDA. Impact Fracture Behavior of Polycrystalline Graphites and C/C Composites Using High Velocity Steel Sphere, International Journal of Materials and Product Technology, Vol. 16, pp. 149-155, 2001.
• Takashi AKATSU, Minoru SUZUKI, Yasuhiro TANABE, Eiichi YASUDA. Effect of Whisker Content and Dimensions on the R-curve Behavior of an Alumina Matrix Composite Reinforced with Silicon Carbide Whiskers, Journal of Materials Research, Vol. 16, No. 7, pp. 1919-1927, 2001.
• Naoya MIYAJIMA, Takashi AKATSU, Osamu ITO, R.SAKUROVS, Satoshi SHIMIZU, Mototsugu SAKAI, Yasuhiro TANABE, Eiichi YASUDA. The Rheological Behavior during Cabonization of Iodine-Treated Coal Tar Pitch, Carbon, Vol. 39, pp. 647-653, 2001.
• Kazuhito HOSHI, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Curing Properties of Furfuryl Alcohol Condensate with Carbonaceous Fine Particles under Ultrasonication, Ultrasonics Sonochemistry, Vol. 8, pp. 89-92, 2001.
• Yasuhiro TANABE, Kazuhito HOSHI, Manabu ISHIBASHI, Takashi AKATSU, Eiichi YASUDA. Effect of the Size and the Amount of Surface Functional Groups of Inclusions on Microstructure Development in Furan Resin-Derived Carbon, Carbon, Vol. 39, pp. 294-298, 2001.
• Naoya MIYAJIMA, Eiichi YASUDA, Brian RAND, Takashi AKATSU, Kinichi KAMESHIMA, Yasuhiro TANABE. Comparison of Bromine-Treatment and Iodine-Treatment in the Carbonization of Pitches, TANSO, Vol. 195, pp. 405-409, 2000.
• Shuqiang WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Phase Comlpositions and Microstructural Characteristics of Solidified Al2O3-Rich Spinel Solid Solution/YAG Composite, Journal of the European Ceramic Society, Vol. 20, pp. 39-43, 2000.
• 田邊靖博, 田原大示, 赤津隆, 逆井基次, 安田榮一. 空気酸化した黒鉛材料へのビッカース圧子の圧入挙動, 炭素, Vol. 191, pp. 45-48, 2000.
• 田邊靖博, 岡田信子, 向藤原朗, 赤津隆, 安田榮一. ガス発生を伴うTiCの燃焼合成における燃焼波面伝ぱの観察, 日本セラミックス協会学術論文誌, Vol. 108, pp. 290-297, 2000.
• Shu-Quing WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Divorced Eutectic and Interface Characteristics in a Solidified YAG-Spinel Composite with Spinel Rich Composition, Journal of Material Science, Vol. 35, pp. 2757-2761, 2000.
• Naoya MIYAJIMA, Takashi AKATSU, Tadaaki IKOMA, Osamu ITO, Brian RAND, Yasuhiro TANABE, Eiichi YASUDA. A Role of Charge-Transfer Complex with Iodine in the Modification of Coal Tar Pitch, Carbon, Vol. 38, pp. 1831-1838, 2000.
• Haruhiko SHINKAWA, Takashi AKATSU, Eiichi YASUDA, Yasuhiro TANABE. High Speed Observation of Impact Fracture of Carbon Materials, Key Engineering Materials, Vol. 166, pp. 121-124, 1999.
• Yohsuke ISHIGURO, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Strain Rate Dependence on the Shear Strength of Unidirectional C/C Composites, Key Engineering Materials, Vol. 166, pp. 139-142, 1999.
• Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. The Correlation between Crack Extension Resistance and Microstructure in a Whisker-Reinforced Ceramic Composite, Key Engineering Materials, pp. 161-163, 291-294, 1999.
• Shu-Quing WANG, Takashi AKATSU, Yasuhiro TANABE, Zenbe-e NAKAGAWA, Eiichi YASUDA. Eutectic Precipitation in a Solidified Y3Al5O12-MgAl2O4 Composite, Journal of Meterial Science Letters, Vol. 18, pp. 1325-1327, 1999.
• Shuqiang WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Eutectic Precipitation in Spinel-YAG Composite with Off-Eutectic Composition, Ceramic Transactions, Vol. 96, pp. 315-328, 1999.
• Shuqiang WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Phase Relationships and Microstructural Control of Isothermally Solidified YAG-Spinel-Alumina Composites, Ceramic Transactions, Vol. 96, pp. 271-283, 1999.
• Shuqiang WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Precipitation of YAlO3 in YAG-Spinel Eutectic Composite with YAG-Rich Composition, Ceramic Transactions, Vol. 96, pp. 285-293, 1999.
• Shu-Quing WANG, Futoshi YAMAMOTO, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Metastable Precipitation in Isothermally Solidified YAG-Alumina Composites with Off-Eutectic Composition, Journal of Materials Science, Vol. 34, pp. 3489-3494, 1999.
• Yasuhiro TANABE, Takashi SAKAMOTO, Nobuko OKADA, Takashi AKATSU, Eiichi YASUDA. Effect of Gravity on Titanium Carbide Foams by Self-Propagation High-Temperature Synthesis, Journal of Materials Research, Vol. 14, No. 4, pp. 1516-1523, 1999.
• 田邊靖博, 石本卓士, 赤津隆, 安田榮一. 炭素繊維織物を用いたCFRPの衝撃損傷, 日本複合材料学会誌, Vol. 25, No. 4, pp. 149-155, 1999.
• Shu-Quing WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Metastable Precipitation of YAlO3 in Isothermally Solidified YAG-Spinel Eutectic Composite with YAG-Rich Composition, Key Engineering Materials, Vol. 161-163, pp. 169-172, 1999.
• Shu-Quing WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Divorced Eutectic Precipitation in Isothermally Solidified Spinel-YAG Composite with Off-Eutectic Composition, Key Engineering Materials, Vol. 161-163, pp. 117-120, 1999.
• Shuqiang WANG, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Microstructural Characteristics of YAG-Spinel Eutectic Composites with Changed Composition, Ceramic Transactions, Vol. 96, pp. 295-305, 1999.
• Yohsuke ISHIGURO, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Shear Failure Behavior of Continuous Fiber Reinforced Ceramic Matrix Composites, Key Engineering Materials, Vol. 161-163, pp. 171-174, 1999.
• SUBIANTORO, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Crack Healing Behavior of Monolithic Al2O3 and Al2O3-SiCw Composite at High Temperature, Key Engineering Materials, Vol. 166, pp. 125-130, 1999.
• Takashi AKATSU, Eiichi YASUDA. The Effect of Interfacial Friction Stress on the Work-of-Fracture of a Whisker-Reinforced Ceramic Composite, Ceramic Transactions, Vol. 99, pp. 295-310, 1998.
• Shu-Qing WANG, Takashi AKATSU, Yasuhiro TANABE, Zenbe-e NAKAGAWA, Eiichi YASUDA. Eutectic Precipitation of the Spinel Solid Solution-Yttrium Aluminum Garnet (YAG) System, Journal of the American Ceramic Society, Vol. 81, pp. 263-265, 1998.
• Shu-Qing WANG, Takashi AKATSU, Eiichi YASUDA, Yasuhiro TANABE, Zenbe-e NAKAGAWA. Peritectic Precipitation in Corundum-Mullite-Spinel System, British Ceramic Transactions, Vol. 97, pp. 11-16, 1998.
• Shu-Quing WANG, Futoshi YAMAMOTO, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Metastable Precipitation of YAlO3 in Isothermally Solidified YAS/(Al2O3-Rich) Spinel Composites, Journal of Materials Science, 33, pp. 5157-5162, 1998.
• Takashi AKATSU, Masataka OHSHIMA, Yasuhiro TANABE, Eiichi YASUDA, Shigehiko YAMADA, Toyohiko YANO. Work-of-Fracture of SiC-Whisker Reinforced Al2O3 Composite at Elevated Temperatures, Science and Engineering of Composite Materials, Vol. 7, No. 3, pp. 231-238, 1998.
• 赤津隆, 田邊靖博, 安田榮一. 亀裂面架橋で高靭性化したセラミックスの破壊靭性値と破壊エネルギーに及ぼす不可逆的エネルギー散逸の影響, 日本セラミックス協会学術論文誌, Vol. 106, pp. 390-395, 1998.
• 田邊靖博, 佐々木健一, 赤津隆, 安田榮一, 澤岡昭. 飛翔体衝突によって電極用黒鉛材料に生成するクレータおよびスポール形状に与える試料厚さならびに飛翔体材質の影響, 炭素, Vol. 176, pp. 26-28, 1997.
• 田邊靖博, 佐々木健一, 赤津隆, 安田榮一. 微小球衝突による黒鉛材料のスポール破壊, 炭素, Vol. 176, pp. 167-175, 1997.
• Shu-Qing WANG, Eiichi YASUDA, Takashi AKATSU, Yasuhiro TANABE, Zenbe-e NAKAGAWA. Intergranular Precipitation in Y3Al5O12/MgAl2O4 System, Journal of Material Science Letters, Vol. 16, pp. 1580-1583, 1997.
• Sang-Young YOON, Takashi AKATSU, Eiichi YASUDA. Anisotropy of Creep Deformation Rate in Hot-Pressed Si3N4 with Preferred Orientation of the Elongated Grains, Journal of Material Science, Vol. 32, pp. 3813-3819, 1997.
• Yasuhiro TANABE, Yutaka HOTTA, Takashi AKATSU, Shigehiko YAMADA, Eiichi YASUDA. Shear Strength of C/C Composites Containing an Inorganic Compound Effective for Anti-Oxidation, Journal of Material Science Letters, Vol. 16, pp. 557-559, 1997.
• 赤津隆, 田邊靖博, 山田恵彦, 安田榮一. シェブロン切り欠き入りJIS型曲げ試験片を用いたセラミックスの破壊靭性値及び破壊エネルギー測定, 日本セラミックス協会学術論文誌, Vol. 104, pp. 635-643, 1996.
• ユンサンヨン, 樫村英彰, 赤津隆, 田邊靖博, 山田恵彦, 安田榮一. ホットプレスした窒化ケイ素におけるクリープ速度の粒径依存性, 日本セラミックス協会学術論文誌, Vol. 104, pp. 939-944, 1996.
• Takashi AKATSU, Satoshi HIRAI, Yasuhiro TANABE, Eiichi YASUDA, Yohtaro MATSUO. The R-curve Behavior of Vickers-Indentation Cracks in an SiC-Whisker Reinforced Alumina Composite, Report of the Reserch Laboratory of Engineering Masterials,Tokyo Institute of Technology, Vol. 21, pp. 55-61, 1996.
• Sang-Young YOON, Takashi AKATSU, Eiichi YASUDA, Yasuhiro TANABE. The Influence of Grain Orientation on a Steady State Creep Rate in Hot-Pressed Beta-Si3N4 Whisker/SiAlON Composite, Journal of the Ceramic Society of Japan, Vol. 104, pp. 239-242, 1996.
• Sang-Young YOON, Takashi AKATSU, Eiichi YASUDA. The Microstructure and Creep Deformation of Hot-Pressed Si3N4 with Different Amounts of Sintering Additives, Journal of Materials Research, Vol. 11, pp. 120-126, 1996.
• Takashi AKATSU, Eiichi YASUDA, Mototsugu SAKAI. Fracture Toughness and Work-of-Fracture of Toughened Brittle Materials in Chevron Notch Geometry, Fracture Mechanics of Ceramics, Vol. 11, pp. 245-260, 1996.
• Takashi AKATSU, Eiichi YASUDA. The Effect of Interfacial Chemical Reaction on the Mechanical Properties of Si3N4 Whisker/Al2O3 Composite, Journal of the Ceramics Society of Japan, Vol. 104, pp. 1019-1024, 1996.
• Yasuhiro TANABE, Toru SAITO, Takashi AKATSU, Akira SAWAOKA. Crater Formation of Carbon Materials by Impact of a High Velocity Sphere, Carbon, Vol. 33, pp. 1547-1552, 1995.
• Sei-Min PARK, Eiichi YASUDA, Takashi AKATSU, Yasuhiro TANABE, Masato KAKIHANA, Kazuhiro OZAWA. Evolution of Microstructure in Furan Resin-Derived Carbon with Heat Treatment, Carbon, Vol. 33, pp. 1377-1381, 1995.
• Eiichi YASUDA, Isao HAYASHI, Takashi AKATSU. The Effect of Grain Size on the Internal Friction of Polycrystalline MgO, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 20, pp. 79-82, 1995.
• Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Anisotropies and Mechanical Properties of Hot-Pressed Al2O3 and SiC-Whisker / Al2O3 Composites, Journal of Materials Research, Vol. 9, No. 1, pp. 207-215, 1994.
• 赤津隆, 小久保信作, 福田恭彬, 田邊靖博, 安田榮一. ドクターブレード法で作製したSiCウィスカー/Al2O3複合材料中のウィスカー配向, 日本複合材料学会誌, Vol. 20, No. 6, pp. 236-244, 1994.
• Eiichi YASUDA, Akira ASANO, Mototsugu SAKAI, Takashi AKATSU. Internal Friction of PYREX Glass and SiC Whisker-Reinforced Glass Matrix Composites, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 19, pp. 71-79, 1994.
• Eiichi YASUDA, Sei-Min PARK, Takashi AKATSU, Yasuhiro TANABE. Development of Self-Mending Type Oxidation Protection of Furan Resin-Derived Carbon by Ta-Compounds Addition, Journal of Material Science Letters, Vol. 13, pp. 378-380, 1994.
• Eiichi YASUDA, Kiyoto SEKINE, Quili BAO, Takashi AKATSU. The Effect of Y2O3 Particles on the Creep Behavior of Polycrystalline MgO, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 18, pp. 101-111, 1993.
• Eiichi YASUDA, Yu-qing WANG, Takashi AKATSU, Yasuhiro TANABE. Effects of Surface Oxidation of SiC Whiskers on Mechanical Properties of SiC Whisker/Al2O3 Composites, Advanced Composite Materials, Vol. 2, No. 3, pp. 195-205, 1992.
• Eiichi YASUDA, Sei-Min PARK, Yasuhiro TANABE, Takashi AKATSU, Shigehiko YAMADA. The Effect of Additives on the Graphitization of Furan Resin, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 17, pp. 145-151, 1992.
• Eiichi YASUDA, Takashi AKATSU, Yasuhiro TANABE, Yohtaro MATSUO. SiC Whisker Reinforced Alumina Matrix Composites, Composite Materials, pp. 157-171, 1992.
• Takashi AKATSU, Yasuhiro TANABE, Yohtaro MATSUO, Eiichi YASUDA. Mechanical Properties of Uni-Directionally Oriented SiC-Whisker/Al2O3 Composite, Journal of the Ceramic Society of Japan, Vol. 100, No. 11, pp. 1227-1303, 1992.
• Eiichi YASUDA, Shin MATSUURA, Takashi AKATSU, Yasuhiro TANABE. Influence of Residual Thermal Stress on Toughening Mechanisms in SiC Whisker-Reinforced Glass Composites, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 16, pp. 87-93, 1991.
• 赤津隆, 田邊靖博, 松浦新, 石井元, 宗像光博, 山田素行, 安田榮一. 表面形態の異なるSiCウィスカーを用いたSiCウィスカー/Al2O3複合材料の力学的性質, 日本セラミックス協会学術論文誌, Vol. 99, pp. 5, 1991.
• Takashi AKATSU et al.. Testing Method for Fracture Energy of a Carbon Fiber-Reinforced Silicon Nitride Ceramic Composite, Proceedings of the 1st International Symposium on the Science of Engineering Ceramics, pp. 473-478, 1991.
• Takashi AKATSU et al.. Testing Methods for Fracture Toughness of SiC Whisker Reinforced Ceramic Composites, Proceedings of the 1st International Symposium on the Science of Engineering Ceramics, pp. 479-484, 1991.
• Eiichi YASUDA, Shin MATSUURA, Takashi AKATSU, Yasuhiro TANABE. Influence of Residual Thermal Stress on Toughening Mechanisms in SiC Whisker-Reinforced Glass Composites, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Vol. 16, pp. 87-93, 1991.
• 安田榮一, 赤津隆, 田邊靖博. SiCウィスカー/Al2O3複合材料の力学的性質に及ぼすウィスカー形状・寸法の影響, 日本セラミックス協会学術論文誌, Vol. 99, pp. 1, 1991.
• Eiichi YASUDA, Takashi AKATSU, Yasuhiro TANABE. The Effect of Whisker Dimensions on Mechanical Properties of SiC-Whisker/Al2O3 Composites, Acheivement in Composites in Japan and the United States, pp. 63-69, 1990.

著書

• 安田榮一, 赤津隆, 田邊靖博, 大谷朝男. “ファイバー”スーパーバイオミメティックス～近未来の新技術創成～, エヌ・ティー・エス, pp. 810-813, May 2007.
• 赤津隆. ナノパーティクル・テクノロジー・ハンドブック, 日刊工業新聞社, pp. 314-316, 2006.
• 吉田道之, 赤津　隆, 若井史博. ケミカル・エンジニアリング, 化学工業社, pp. 13-17, 2006.
• 赤津隆. 機械工学便覧デザイン編β2，材料学・工業材料, 丸善, 2006.
• 赤津隆. セラミック工学ハンドブック第２版(分担）, 技報堂出版, 技報堂出版, 2002.
• TAKASHI AKATSU. Mechanical Properties of Carbon-Carbon Composites; Design and Control of Structure of Advanced Carbon Materials for Enhanced Performance, Kluwer Academic Publishers, Kluwer Academic Publishers, pp. 229-239, 2001.
• 赤津隆. 複合材料術語辞典, アグネ承風社, アグネ承風社, 1994.
• 赤津隆. 絵で見る工業材料事典－複合材料編, 日刊工業新聞社, 日刊工業新聞社, 1991.

国際会議発表 (査読有り)

• Takashi Akatsu. Internal friction behavior of an unidirectionally solidified Al2O3/YAG eutectic at high temperature, Ceramics International, Elsevier, Vol. 33, pp. 1569-1571, Oct. 2007.
• Kentarou CHIHARA, YUTAKA SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Superplastic flow of silicon nitride-based nanocomposite at high strain rates, Mater. Sci. Forum, Vol. 551-552, pp. 597-600, 2007.
• Michiyuki YOSHIDA, Yytaka SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Analysis of the deformation behavior in nanocrystalline Y₂O₃ stabilized tetragonal ZrO₂, Trans. Mater. Res. Soc. Japan, Vol. 29, No. 8, pp. 3581-3584, 2004.
• Fumihiro WAKAI, TAKASHI AKATSU, YUTAKA SHINODA. Dynamics of grain boundary networks in superplasticity, Mater. Sci. Forum, Vol. 447-448, pp. 49-54, 2004.
• Michiyuki YOSHIDA, YUTAKA SHINODA, TAKASHI AKATSU, Fumihiro WAKAI. Effect of yttrium on the deformation of nanocrystalline ZrO₂ at elevated temperatures, Mater. Sci. Forum, Vol. 447-448, pp. 359-364, 2004.

国内会議発表 (査読有り)

• 新島瞬, 竹本喜昭, 赤津隆, 田中享二. セメントペースト粉末からの素材分離方法の検討, セメント技術大会講演要旨, セメント協会, pp. 180-181, May 2009.

国際会議発表 (査読なし・不明)

• 竹本喜昭, 新島瞬, 榎本尚也, 赤津隆, 橋田浩, 田中享二. 廃硫酸による廃コンクリート微粉末の処理プロセスの開発 その2 廃硫酸による処理プロセスの構築, 2010年度日本建築学会大会, 2010年度大会（北陸）学術講演会梗概集, 日本建築学会, Vol. A-1, pp. 713-714, Sept. 2010.
• Junichi MATSUSHITA, Noriyuki FUKUSHIMA, Samon TANAKA, Takashi AKATSU, Eiichi YASUDA, Koichi NIIHARA. Preparation and Characterization of Silicon Hexabride Ceramics, Processing and Fabrication of Materials IX, pp. 17-24, 2001.
• Samon TANAKA, Noriyuki FUKUSHIMA, Junichi MATSUSHITA, Takashi AKATSU, Koichi NIIHARA, Eiichi YASUDA. Mechanical Properties of SiB6 Addition of Carbon Sintered Body, Proceedings of SPIE, Vol. 4234, pp. 346-354, 2001.
• Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Effect of Microstructural Change on the R-curve Behavior of an Alumina Matrix Composite Reinforced with Silicon Carbide Whiskers, Advances in Fracture Research, Proceedings of ICF10, pp. 15.7.3.CD-ROM, 2001.
• Eiichi YASUDA, Naoya MIYAJIMA, Takashi AKATSU, Osamu ITO, Yasuhiro TANABE. Modification Effect of Coal Tar Pitch by Iodine Treatment and Its Relation to Carbonization Process, Abstract and Programme of EuroCarbon 2000, pp. 181-182, 2000.
• Antoni ANTONARULRAJAH, Steve P. APPLEYARD, Takashi AKATSU, Brian RAND. Effect on Fracture Behaviour of Combining Fibres of Different Surface Treatment in Discontinuous Fibre C/C Composites, Abstract and Programme of EuroCarbon 2000, pp. 273-274, 2000.
• Takashi AKATSU, Shilin LU, Steve P. APPLEYARD, Brian RAND. Nanoindentation on Mesophase Pitch-Derived Carbon and Graphite Materials, Abstract and Programme of EuroCarbon 2000, pp. 189-190, 2000.
• Kazuhito HOSHI, Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Curing Process of Furan Resin with Carbonaceous Fine Particles Applying the High Power Ultrasound, Proceedings of Carbon'99, USA, Vol. July 11-16, pp. 210-211, 1999.
• Yasuhiro TANABE, Takuji ISHIMOTO, Takashi AKATSU, Eiichi YASUDA. High Velocity Sphere Impact of CFRPs, Abstracts and Programme of Eurocarbon '98, pp. 609-610, 1998.
• Kazuhiko HOSHI, Manabu ISHIBASHI, Masao UTSUNOMIYA, Takashi AKATSU, Eiichi YASUDA, Yasuhiro TANABE. Microstructural Change of Furan Resin Derived Carbon by Addition of Cabonaceous Fine Particles, International Symposium of Carbon'98, pp. 16-17, 1998.
• Naoya MIYAJIMA, Takashi AKATSU, Yasuhiro TANABE, Brian RAND, Eiichi YASUDA. The Effect of Iodine Treatment on Carbon Yield of Coal Tar Pitch, International Symposium of Carbon'98, pp. 234-235, 1998.
• Takashi AKATSU, Satoshi HIRAI, Yasuhiro TANABE, Eiichi YASUDA, Toshihoko NISHIDA. The Effect of Crack Geometry on the R-curve Behavior of SiC-whisker Reinforced Al2O3 Composite, The Proceedings of the 5th Japan International SAMPE Symposium, pp. 605-610, 1997.
• Yasuhiro TANABE, Ken-ichi SASAKI, Takashi AKATSU, Eiichi YASUDA, Akira SAWAOKA. Damage Behavior of Carbon Materials by Impact of a High Velocity Sphere, The 6th International Symposium on Ceramic Materials and Composites for Engines, pp. 511-515, 1997.
• Shigehiko YAMADA, Y.KOYAMA, T.TADA, Eiichi YASUDA, Takashi AKATSU. Mechanical Properties of SiC Whisker/Si3N4 Composite Prepared by an In-Situ Method, Engineering Ceramics '96 Proceedings, pp. 239-249, 1996.
• Eiichi YASUDA, Sei-Min PARK, Takashi AKATSU, Yasuhiro TANABE, Masato KAKIHANA. Porous Surface Layer in Furan Resin-Derived Carbon, Carbon'95 Extended Abstract, pp. 230-231, 1995.
• Eiichi YASUDA, Junichi ARIYOSHI, Takashi AKATSU, Yasuhiro TANABE. The Role of Fiber/Matrix Interface and Matrix Microstructure on the Shear Strength of UD-C/C Composite, Composite'95: Recent Advances in Japan and the United States, pp. 159-166, 1995.
• Eiichi YASUDA, Yutaka HOTTA, Sei-Min PARK, Junichi ARIYOSHI, Takashi AKATSU, Yasuhiro TANABE. The Influence of the Addition of Inorganic Compounds on the Matrix Microstructure and Shear Strength of C/C Composite, Carbon'95 Extended Abstract, pp. 110-111, 1995.
• Takashi AKATSU, Shinsaku KOKUBO, Toru TAKAYA, Yasuhiro TANABE, Mototsugu SAKAI, Eiichi YASUDA. Crack Closure and Fracture Resistance Behavior of SiC-Whisker Reinforced Ceramic Composites, The Proceedings of the 11 th Korea-Japan Seminar on New Ceramics, Vol. 11, pp. 128-131, 1994.
• Takashi AKATSU, Yasuhiro TANABE, Eiichi YASUDA. Whisker Orientation and Mechanical Properties of SiC-Whisker/Al2O3 Composite, Advanced Materials '93,Transactions of Materials Reseach Soiety of Japan, Vol. 16, No. B, pp. 845-848, 1994.
• Sang-Young YOON, Eiichi YASUDA, Takashi AKATSU. Effect of Sintering Additives on the Creep Deformation and Internal Friction of Si3N4 with Y2O3 and Al2O3, The Proceedings of the 11th Korea-Japan Seminar on New Ceramics, Vol. 11, pp. 141-145, 1994.

国内会議発表 (査読なし・不明)

• 大熊 学, 門脇 大騎, 篠田 豊, 赤津 隆, 若井 史博. 焼結中の微構造変化における代表体積要素の寸法決定, 第28回日本セラミックス協会秋季シンポジウム, Sept. 2015.
• 新島瞬, 竹本喜昭, 榎本尚也, 赤津隆, 橋田浩, 田中享二. 廃硫酸による廃コンクリート微粉末の処理プロセスの開発 その1 試薬硫酸による最適条件の検討, 2010年度日本建築学会大会, 2010年度大会（北陸）学術講演会梗概集, 日本建築学会, Vol. A-1, pp. 711-712, Sept. 2010.
• 新島瞬, 赤津隆, 竹本喜昭, 田中享二. 塩酸による骨材除去後の廃コンクリート微粉末からの素材分離, 日本建築学会大会学術講演会, 日本建築学会大会学術講演梗概集, 社団法人日本建築学会, Vol. A-1, pp. 1179-1180, Aug. 2009.
• 新島瞬, 赤津隆, 田中享二. セメントペースト粉末からの素材分離方法の検討, 2008年度日本建築学会関東支部研究発表会, 2008年度日本建築学会関東支部研究報告集, 日本建築学会, Vol. CD-ROM, Mar. 2009.
• 竹本喜昭, 橋田浩, 榎本尚也, 赤津隆, 田中享二. 廃セメント微粉末を用いたCO2固定化および素材分離に関する基礎的研究, 日本建築学会大会学術講演梗概集, 日本建築学会, No. A-1, pp. 201-202, Aug. 2007.

その他の論文・著書など

• 若井史博, 赤津隆, 篠田豊. セラミックスの焼結力学 －安全・安心のセキュアマテリアルに向けて－, セラミックス, 49, No. 2, 82-86, Feb. 2014.
• 安田榮一, 赤津隆, 田邊靖博, 中村和正, 干川, 宮嶋尚哉. カーボンナノファイバーの微細組織制御, 炭素, 炭素材料学会, No. 255, p. 254-265, Oct. 2012.
• 田中 英彦, 赤津隆. エンジニアリングセラミックの研究開発動向, セラミックス, 日本セラミックス協会, 43, [11], 962-965, Nov. 2008.
• 吉田道之, 赤津隆, 若井史博. ナノ結晶材料の機械的性質, ケミカルエンジニアリング, Vol. 51, No. 3, pp. 181-185, 2006.
• 赤津隆. コンクリート構造物のせん断破壊・変形特性の評価法における混合モード破壊の意義, 日本コンクリート工学協会，コンクリートの混合モード損傷・破壊のモデル化と構造性能評価研究委員会報告書, pp. 2, 26-31, 2005.
• 赤津隆. ナノスケールでの材料表面の弾・塑性的応答とその解析, 日本板硝子材料工学助成会成果報告書, Vol. 22, pp. 1-5, 2004.
• 若井史博, 赤津隆, 篠田豊. 超塑性の粒界ネットワーク・ダイナミクス, セラミックス, Vol. 38, pp. 123-128, 2003.
• 若井 史博, 赤津 隆, 篠田 豊. 超塑性の粒界ネットワークダイナミクス, セラミックス, Vol. 38, No. 2, pp. 123-128, 2003.
• 安田榮一, 田邊靖博, 赤津隆. C/C 複合材料の研究開発の進展と応用, セラミックス, Vol. 34, No. 4, pp. 266-269, 1999.
• 安田榮一, 赤津隆, 田邊靖博. 高せん断強度炭素繊維/炭素複合材料の開発, 日本板硝子材料工学助成会成果報告書, Vol. 11, 1993.
• 安田榮一, 赤津隆, 田邊靖博. ウィスカー強化セラミックス複合材料, 日本機会学会，RC-87エンジンにおける新燃料と各種素材の有効利用法研究分科会最終報告書, pp. 235-251, 1991.
• 安田榮一, 赤津隆, 田邊靖博. 超高温構造用セラミックスの強靭化プロセスに関する研究, 旭硝子財団研究報告, Vol. 58, pp. 207-216, 1991.

特許など

• 赤津隆, 佐藤陽亮, 谷口　佳　, 日野　雄太　, 松永　久宏　. マグネシア・カーボンれんがの製造方法. 特許. 登録. 国立大学法人東京工業大学, JFEスチール株式会社. 2015/12/25. 特願2015-254130. 2017/06/29. 特開2017-114746. 特許第6375555号. 2018/08/03 2018.
• 赤津隆, 佐藤陽亮, 谷口　佳　, 日野　雄太　, 松永　久宏　. 耐火れんがの製造方法. 特許. 登録. 国立大学法人東京工業大学, JFEスチール株式会社. 2015/12/25. 特願2015-254384. 2017/06/29. 特開2017-114748. 特許第6432869号. 2018/11/16 2018.
• 田中享二, 赤津隆, 竹本　喜昭, 橋田　浩, 榎本　尚也. 再生細骨材の製造方法. 特許. 公開. 国立大学法人東京工業大学, 清水建設株式会社, 国立大学法人九州大学. 2011/04/18. 特願2011-092218. 2012/10/04. 特開2012-188338. 2012.
• 田中享二, 赤津隆, 新島　瞬, 竹本　喜昭, 橋田　浩, 榎本　尚也. 廃コンクリート微粉末の処理方法. 特許. 公開. 国立大学法人東京工業大学, 清水建設株式会社, 国立大学法人　九州大学. 2010/03/03. 特願2010-046818. 2011/09/15. 特開2011-178639. 2011.
• 篠田豊, 赤津隆, 若井史博. 形状記憶材料、製造方法および使用方法. 特許. 公開. 国立大学法人東京工業大学. 2010/01/21. 特願2010-011058. 2011/08/04. 特開2011-148653. 2011.
• 赤津隆, 山田　祐司, 干川　康人, 篠田豊, 若井史博. 酸化チタン膜および酸化チタン膜形成方法. 特許. 公開. 国立大学法人東京工業大学. 2009/03/15. 特願2009-062153. 2010/09/30. 特開2010-215438. 2010.
• 篠田豊, 若井史博, 赤津隆, 柳沢　祐輝, 藤井　英俊. 硬質合金材料、製造方法、工具および耐摩耗部材. 特許. 公開. 国立大学法人東京工業大学. 2008/02/29. 特願2008-049678. 2009/09/10. 特開2009-203544. 2009.
• 篠田豊, 赤津隆, 若井史博. 金属材料に超硬合金を一体成形する方法およびその一体成型部材. 特許. 公開. 国立大学法人東京工業大学. 2007/05/22. 特願2007-135504. 2008/12/04. 特開2008-290890. 2008.
• 田中享二, 赤津隆, 竹本　喜昭, 橋田　浩, 榎本　尚也. 廃セメント微粉末を用いた合成炭酸カルシウムの製造方法. 特許. 登録. 国立大学法人東京工業大学, 清水建設株式会社, 国立大学法人九州大学. 2006/12/13. 特願2006-336408. 2008/06/28. 特開2008-143765. 特許第4958156号. 2012/03/30 2012.

学位論文

• SiCウィスカー／Al2O2複合材料の高靭性化,  Master of Engineering,  Tokyo Institute of Technology,  1990/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]