論文

• Yoji Miyajima, Daisuke Kashioka, Nobuhiro Tsuji. Ultimate Rolling Texture in Pure Aluminum Highly Deformed by Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain Subdivision, Materials Transactions, Vol. 58, No. 08, pp. 1127-1133, July 2017.
• M. Mito, H. Matsui, T. Yoshida, T. Anami, K. Tsuruta, H. Deguchi, T. Iwamoto, Daisuke Terada, Y. Miyajima, N. Tsuji. Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation, Review of Scientific Instruments, AIP publishing, Volume 87, Number 5, May 2016.
• Hiroki Adachi, Y. Miyajima, M. Sato, Nobuhiro Tsuji. Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique, Mater Trans, Vol. 56, pp. 671-678, Apr. 2015.  公式リンク  
  
• Y. Miyajima, S. Komatsu, M. Mitsuhara, Satoshi Hata, Hideharu Nakashima, Nobuhiro Tsuji. Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium, Philos Mag, Vol. 95, pp. 1139-1149, Mar. 2015.  公式リンク  
  
• P.P.Bhattacharjee, Y.Takatsuji, Y.Miyajima, D.Terada, N.Tsuji. Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}) Polycrystalline Nickel Sheet, Metallurgical and Materials Transactions A, Vol. 43A, Page 2442-2452, July 2012.
• K. Kashihara, W. Ikushima, Y. Miyajima, Daisuke Terada, Nobuhiro Tsuji. Change in Crystal Orientations of a {100} < 001 > Pure Aluminum Single Crystal during Accumulative Roll Bonding, Mater Trans, Vol. 52, pp. 825-829, Apr. 2011.  公式リンク  
  
• T. Miyazaki, Daisuke Terada, Y. Miyajima, C. Suryanarayana, R. Murao, Y. Yokoyama, K. Sugiyama, M. Umemoto, Y. Todaka, Nobuhiro Tsuji. Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion, J Mater Sci, Vol. 46, pp. 4296-4301, Jan. 2011.  公式リンク  
  
• Takahiro Kunimine, TOSHIYUKI FUJII, SUSUMU ONAKA, Nobuhiro Tsuji, MASAHARU KATO. Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding, Journal of Materials Science, Vol. 46, pp. 4290-4295, 2011.
• Y. Miyajima, M. Mitsuhara, Satoshi Hata, Hideharu Nakashima, Nobuhiro Tsuji. Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation, Mat Sci Eng a-Struct, Vol. 528, pp. 776-779, Sept. 2010.  公式リンク  
  
• Y. Miyajima, S. Y. Komatsu, M. Mitsuhara, Satoshi Hata, Hideharu Nakashima, Nobuhiro Tsuji. Change in electrical resistivity of commercial purity aluminium severely plastic deformed, Philos Mag, Vol. 90, pp. 4475-4488, July 2010.  公式リンク  
  

国際会議発表 (査読有り)

• A. Matsumoto, M. Chen, A. Shibata, Tomotaka Miyazawa, M. Sato, N. Tsuji. Relationship between local stress field in austenite and variant selection in deformation-induced martensitic transformation in Fe-24Ni-0.3C alloy, Materials Today: Proceedongs, ELSEVIER, vol. 2S, p. S945-S948, July 2015.
• M. Chen, A. Matsumoto, A. Shibata, Tomotaka Miyazawa, D. Terada, M. Sato, H. Adachi, N. Tsuji. Local Stress Evaluation during Deformation in SUS304 Austenitic Stainless Steel, Materials Today: Proceedings, ELSEVIER, vol. S2, p. S937-S940, July 2015.
• P. P. Bhattacharjee, Y. Takatsuji, Y. Miyajima, Daisuke Terada, Nobuhiro Tsuji. Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture, Mater Sci Forum, Vol. 753, pp. 293-296, Mar. 2013.  公式リンク  
  
• Hiroki Adachi, Y. Miyajima, A. Shibata, Daisuke Terada, Nobuhiro Tsuji. Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation, Proceedings of the 13th International Conference on Aluminum Alloys (Icaa13), pp. 61-66, Sept. 2012.  公式リンク  
  
• Nobuhiro Tsuji, Y. Takatsuji, Y. Miyajima, P. P. Bhattacharjee, Daisuke Terada. Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel, Mater Sci Forum, Vol. 702-703, pp. 402-405, Dec. 2011.  公式リンク  
  
• Y. Miyajima, D. Kashioka, Nobuhiro Tsuji. Texture evolution in ARB processed commercial purity aluminium, Mater Sci Forum, Vol. 702-703, pp. 173-176, Dec. 2011.  公式リンク  
  

国内会議発表 (査読なし・不明)

• 柴田曉伸, 陳美伝, 宮澤知孝, 佐藤眞直, 辻伸泰. SUS304オーステナイト系ステンレス鋼の応力誘起マルテンサイト変態とひずみ誘起マルテンサイト変態におけるバリアント選択則, 日本金属学会2016年秋期(第159回)講演大会, 日本金属学会講演概要, Sept. 2016.
• 陳 美伝, 松本 晃英, 柴田 曉伸, 宮澤 知孝, 佐藤 真直, 寺田 大将, 辻 伸泰. SUS304オーステナイト系ステンレス鋼における変形誘起マルテンサイト変態のバリアント選択と局所応力場の関係, 2015年春期講演大会(第156回), 日本金属学会講演概要, 公益社団法人 日本金属学会, Mar. 2015.
• 松本 晃英, 陳 美伝, 柴田 曉伸, 辻 伸泰, 宮澤 知孝, 佐藤 眞直. Fe-33Ni合金における変形誘起マルテンサイトの組織形態とバリアント選択則, 2014年秋期講演大会(第155回), 日本金属学会講演概要, 公益社団法人 日本金属学会, Sept. 2014.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]