論文

• Sari Yanagida, Takashi Nagoshi, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Equo Kobayashi, Akira Umise, Hideki Hosoda, Tatsuo Sato, Masato Sone. Heterogeneous Deformation Behavior of Cu-Ni-Si Alloy by Micro-Size Compression Testing, Crystals, MDPI, Vol. 10, No. 12, p. 1162, Dec. 2020.  公式リンク  
  
• Tso-Fu Mark Chang, Hikaru Kinashi, Takashi Nagoshi, Tatsuo Sato, Masato Sone. Impurity study of copper film fabricated by electroplating with supercritical carbon dioxide emulsified electrolyte, Copper and Copper Alloy, Vol. 58, No. 1, pp. 177-181, June 2019.
• Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Takashi Nagoshi, Equo Kobayashi, Hideki Hosoda, Tatsuo Sato, Masato Sone. Deformation Behaviors of Pure Cu and Cu-Ni-Si Alloy Evaluated by Micro-Tensile Testing, Materials Transactions, Vol. 57, No. 11, pp. 1897-1901, Sept. 2016.
• Mitsuo Sano, Yuma Tahara, Chun-Yi Chen, Tso-Fu Mark Chang, Tomoko Hashimoto, Hiromichi Kurosu, Tatsuo Sato, Masato Sone. Application of Supercritical Carbon Dioxide in Catalyzation and Ni-P Electroless Plating of Nylon 6,6 Textile, Surface and Coatings Technology, Vol. 302, pp. 336–343, Aug. 2016.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Effect of Annealing on Mechanical Properties of Nickel Electrodeposited Using Supercritical CO2 Emulsion Evaluated by Micro-Compression Test, Microelectronics Engineering, Vol. 153, No. 5, pp. 101-104, Apr. 2016.
• 鄭伯倫, 名越貴志, TSO-FUMARK CHANG, 細田秀樹, 里達雄, 曽根正人. 微小圧縮試験によるAl-Mg合金双結晶の変形挙動評価, 日本金属学会誌, 日本金属学会, Vol. 80, No. 1, pp. 66-70, Jan. 2016.
• Mana Tanabe, Tso-Fu Mark Chang, Takashi Nagoshi, Sung-Ting Chung, Wei-Ta Tsai, Hideki Hosoda, Tatsuo Sato, Masato Sone. Mechanical Properties of Sn Electrodeposited in Supercritical CO2 Emulsions Using Micro-Compression Test, Microelectronics Engineering, Elsevier, Vol. 141, pp. 219-222, May 2015.
• Yoshiaki Kihara, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Tensile Behavior of Micro-Sized Specimen made of Single Crystalline Nickel, Materials Letters, Elsevier, Vol. 153, pp. 36-39, Apr. 2015.  公式リンク  
  
• Yoshiaki Kihara, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Tensile Behavior of Micro-Sized Specimen Fabricated from Nanocrystalline Nickel Film, Microelectronics Engineering,, Vol. 141, pp. 17-20, Jan. 2015.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Size effect on the Electrodeposited Nickel Investigated by Micro-Compression Test, 4th WMRIF Workshop for Young Scientists, Sept. 2014.
• Mana Tanabe, Tso-Fu Mark Chang, Hideki HOSODA, TATSUO SATO, Masato Sone. Electrodeposition of Tin Using Supercritical Carbon Dioxide Emulsions, ECS Electrochemistry Letter, Vol. 3, No. 10, pp. D44-D45, Aug. 2014.
• 名越貴志, 木梨光, 武藤雅英, Tso-Fu Mark Chang, 里達雄, 曽根正人. 超臨界二酸化炭素エマルション中で電気めっきされた銅皮膜のマイクロ圧縮試験による力学的特性評価, 銅と銅合金, 日本銅学会, Vol. 53, No. 1, pp. 161-165, Aug. 2014.
• Takashi Nagoshi, Akinobu Shibata, Yoshikazu Todaka, Tatsuo Sato, Masato Sone. Mechanical behavior of a microsized pillar fabricated from ultrafine-grained ferrite evaluated by a microcompression test, Acta Materialia, Vol. 73, pp. 12-18, July 2014.
• Takuro Aoki, Equo Kobayashi, Masato Sone, Tatsuo Sato. Microstructure and Mechanical Properties of D-SSF Processed Al-Zn-Mg Alloys with High Fe Content, Materials Science Forum, Trans Tech Publications, Vol. 794-796, pp. 1109-1114, June 2014.
• Rina Khanum, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Porous nickel films plated in supercritical carbon dioxide emulsified electrolyte using a series of fluorinated nonionic surfactants, Surface & Coating Technology, Vol. 259, pp. 325-329, May 2014.
• Tetsuya Shimizu, Yuma Ishimoto, Tso-Fu Mark Chang, Hikaru Kinashi, Takashi Nagoshi, Tatsuo Sato, Masato Sone. Cu Wiring into Nano-Scale Holes by Electrodeposition in Supercritical Carbon Dioxide Emulsified Electrolyte with a Continuous Flow Reaction System, The Journal of Supercritical Fluids, Elsevier, Vol. 60, pp. 60-64, May 2014.
• Hikaru Kinashi, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Mechanical Properties of Cu Electroplated in Supercritical CO2 Emulsion Evaluated by Micro-Compression Test, Microelectronics Engineering, Elsevier, Vol. 121, pp. 83-86, May 2014.
• Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Fabrication of TiO2 Micro-Structures by Cathodic Deposition, Microelectronics Engineering, Elsevier, Vol. 121, pp. 80-82, May 2014.
• JaeHwang Kim, Seong Nyeong Kim, Equo Kobayashi, Tatsuo Sato. Thermal Stability and Transition Behavior of Nanoclusters during Two-Step Aging at 250℃ in Al-Mg-Si(-Cu) Alloys, Materials Transactions, Vol. 55, No. 5, pp. 768-773, Apr. 2014.
• Akiyoshi Araki, Warren J. Poole, Equo Kobayashi, Tatsuo Sato. Twinning Induced Plasticity and Work Hardening Behavior of Aged Cu-Ni-Si Alloy, Materials Transactions, Vol. 55, No. 3, pp. 501-505, Feb. 2014.
• Tso-Fu Mark Chang, Wei-Hao Lin, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Effects of Fluorinated Surfactant in Cathodic Deposition of TiO2 Films with Supercritical CO2 Emulsified Electrolyte, ECS Electrochemistry Letter, The Electrochemical Society, Vol. 3, No. 4, pp. D1-D2, Jan. 2014.
• Takashi Nagoshi, Masahide Mutoh, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Sample size effect of electrodeposited nickel with sub-10 nm grain size, Materials Letters, Elsevier, Vol. 117, pp. 256-259, Jan. 2014.
• 里 達雄, Than Trong Long, 手塚裕康, 神尾彰彦, 高橋恒夫. Al-Cu合金強制固溶体における周期構造の形成, 日本金属学会誌, Vol. 49, No. 8, pp. 591-597, 2014.
• Wei-Hao Lin, Tso-Fu Mark Chang, Yi-Hsuan Lu, Tatsuo Sato, Masato Sone, Kung-Hwa Wei, Yung-Jung Hsu. Supercritical CO2-Assisted Electrochemical Deposition of ZnO Mesocrystals for Practical Photoelectrochemical Applications, The Journal of Physical Chemistry, C, American Chemical Society, Vol. 117, No. 48, pp. 25596-25603, Dec. 2013.
• Yoshihiro Terada, Yoshinori Murata, Tatsuo Sato. Creep life assessment of a die-cast Mg-5Al-0.3Mn alloy, Materials Science & Engineering A, Vol. 584, pp. 63-66, Nov. 2013.
• Mami Mihara, Equo Kobayashi, Tatsuo Sato. Rapid Age-Hardening Behavior of Al-Mg-Cu (-Ag) Alloys and Incubation Stage in the Low-Temperature Aging, Materials Transactions, Vol. 54, No. 10, pp. 1898-1904, Oct. 2013.
• 寺田芳弘, 村田純教, 里 達雄. Mg-Al-Ca系ダイカスト合金における高温クリープ変形中の転位組織解析, 日本金属学会誌, Vol. 77, No. 9, pp. 391-397, Sept. 2013.
• Tomo Ogura, Takanori Otani, Akio Hirose, Tatsuo Sato. Improvement of strength and ductility of an Al–Zn–Mg alloy by controlling grain size and precipitate microstructure with Mn and Ag addition, Materials Science and Engineering: A, Volume 580, No. 15, pp. 288-293, Sept. 2013.
• 荒木章好, 小林郁夫, 里 達雄, 廣瀬清慈, 江口立彦. Cu-Ni-Si合金の時効析出組織および引張変形挙動, 銅と銅合金, Vol. 52, No. 1, pp. 14-18, Aug. 2013.
• Zhijun Zhang, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effects of the Mn/Fe Ratio and Cooling Rate on the Modification of Fe, Materials Transactions, Vol. 54, No. 8, pp. 1484-1490, Aug. 2013.
• 古田 遼, 里 達雄, 小林郁夫, 手塚裕康. Cu-Ti合金の時効硬化に及ぼすB添加の影響, 銅と銅合金, Vol. 52, No. 1, pp. 23-29, Aug. 2013.
• 高木康夫, 増田哲也, 里 達雄. Al-Mg-Si合金の多段時効挙動に及ぼす予備時効温度の影響, 軽金属, Vol. 63, No. 7, pp. 245-252, July 2013.
• Rina Khanum, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Control of Pore Structure in Porous Nickel Films Fabricated by Electroplating with Supercritical CO2 Emulsion, ECS Electrochemistry Letters, The Electrochemical Society, Vol. 2, No. 10, pp. D43-D44, July 2013.
• Tso-Fu Mark Chang, Chiemi Ishiyama, Tatsuo Sato, Masato Sone. Quantitative Study on Removal of SU-8 Photoresist Patterns by Supercritical CO2 Emulsion, Microelectronic Engineering, Elsevier, Vol. 110C, pp. 204-206, June 2013.
• Masahide Mutoh, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Micro-compression test using non-tapered micro-pillar of electrodeposited Cu, Microelectronic Engineering, Elsevier, Vol. 111, pp. 118-121, June 2013.
• Tso-Fu Mark Chang, Wei-Hao Lin, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Cathodic Deposition of TiO2 Thin Films with Supercritical CO2 Emulsified Electrolyte, Electrochemistry Communications, Elsevier, Vol. 33, No. C, pp. 68-71, June 2013.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Mechanical Properties of Nickel Fabricated by Electroplating with Supercritical CO2 Emulsion Evaluated by Micro-Compression Test Using Non-Tapered Micro-sized Pillar, Microelectronic Engineering, Elsevier, Vol. 110C, pp. 269-272, June 2013.
• Yoshihiro TERADA, Yoshinori MURATA, Tatsuo SATO. A Model of Dislocation Movements during Creep of Die-Cast Mg-Al-Ca Alloy, Materials Science and Technology of Japan, Vol. 50, No. 3, pp. 109-116, June 2013.
• C Phongphisutthinan, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effects of β-Mg2Si Precipitates on Semi-Solid Microstructures of Wrought Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process, Materials Transactions, Vol. 54, No. 4, pp. 609-617, Apr. 2013.
• SeongNyeong Kim, JaeHwang Kim, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Formation Behavior of Nanoclusters in Al-Mg-Si Alloys with Different Mg and Si Concentration, Materials Transactions, Vol. 54, No. 3, pp. 297-303, Mar. 2013.
• JaeHwang Kim, Calin Daniel Marioara, Randi Holmestad, Equo Kobayashi, Tatsuo Sato. Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in Al Mg Si alloys, Materials Science and Engineering: A, Vol. 560, pp. 154-162, Jan. 2013.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Micro-compression test of nanocrystalline Nickel deposited by supercritical carbon dioxide emulsion, Applied Mechanics and Materials, Vol. 284-287, pp. 163-167, Jan. 2013.
• Tso-Fu Mark Chang, Takashi Nagoshi, Chiemi Ishiyama, Tatsuo Sato, Masato Sone. Intact Ultrathin Ni Films Fabricated by Electroplating with Supercritical CO2 Emulsion, Applied Mechanics and Materials, Vol. 284-287, pp. 147-151, Jan. 2013.
• 荒木章好, 石塚祐也, 小林郁夫, 里 達雄, 廣瀨清慈, 江口立彦. Cu-Ni-Si合金における時効析出挙動と加工硬化率の変化, 銅と銅合金, Vol. 51, No. 1, pp. 143-147, Aug. 2012.
• YeLim Kim, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effect of Ca Addition on Precipitation Behavior of Mg-6.0mass%Zn-3.0mass%Al Alloy, Materials Transactions A, Vol. 53, No. 8, pp. 1371-1378, Aug. 2012.
• 石塚祐也, 荒木章好, 小林郁夫, 里 達雄, 廣瀨清慈, 江口立彦. Cu-Ni-Si合金の時効析出挙動に及ぼすCrおよびFe添加の影響, 銅と銅合金, 銅と銅合金, Vol. 51, No. 1, pp. 108-115, Aug. 2012.
• J Kim, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effects of Cu and Ag Addition on Nanocluster Formation Behavior in Al-Mg-Si Alloys, Korean Journal of Materials Research, Vol. 22, No. 7, pp. 329-334, July 2012.
• Yoshihiro Terada, Yoshinori Murata, Tatsuo Sato, Masahiko Morinaga. Dislocation Movements during High-Temperature Creep in Die-Cast Mg-Al-Ca Alloys, Proc. of 12th Intern. Conf. on Creep and Fracture of Engineering Materials and Structures, The Japan Institute of Metals, pp. 1-4, May 2012.
• C Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato, S Takamori, Y Ohsawa. Caliber rolling process and mechanical properties of high Fe-containing Al-Mg-Si alloys, Materials Transactions A, Vol. 53, No. 5, pp. 885-892, May 2012.
• Ye-Lim Kim, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effect of Al addition on the precipitation behavior of a binary Mg-Zn alloy, Korean J. Mater. Research, Vol. 3, Mar. 2012.
• Hyun Bom Lee, HIROYASU TEZUKA, Equo Kobayashi, TATSUO SATO, Kee Do Woo. Fabrication and Mechanical Properties of Al-Based In Situ Nano-Composites Reinforced by Al2O3 and Intermetallic Compounds, Materials Transactions, Vol. 53, No. 2, pp. 428-434, Feb. 2012.
• C. D. Marioara, Junya Nakamura, Kenji Matsuda, S. J. Andersen, R. Holmestad, Tatsuo Sato, Tokimasa Kawabata, S. Ikeno. HAADF-STEM study of β'-type precipitates in an over-aged Al-Mg-Si-Ag alloy, Phil. Mag., pp. 1-10, 2012.
• 石塚祐也, 髙久 茜, 小林郁夫, 里 達雄, 廣瀨清慈, 江口立彦. Cu-Ni-Si合金の時効に伴うかたさおよび電気比抵抗の段階的変化に及ぼす微量添加元素の影響, 銅と銅合金, Vol. 50, No. 1, pp. 44-51, Aug. 2011.
• 髙久 茜, 荒木章好, 石塚祐也, 小林郁夫, 里 達雄, 廣瀨清慈, 江口立彦. Cu-Ni-Si合金の時効に伴うかたさおよび電気比抵抗の段階的変化, 銅と銅合金, Vol. 50, No. 1, Aug. 2011.
• Yoshihiro Terada, Yoshinori Murata, Tatsuo Sato, Masahiko Morinaga. Assessment of Creep Rupture Life of Die-Cast Mg-Al-Mn Alloy, Materials Science and Technology of Japan, Vol. 48, No. 3, pp. 134-138, June 2011.
• Yoshihiro Terada, Yoshinori Murata, Tatsuo Sato, Masahiko Morinaga. Analysis of Creep Rupture Life of Mg-Al-Mn Alloy Produced by Die-Casting, Materials Chemistry and Physics, Vol. 128, pp. 32-34, May 2011.
• Chakkrist Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato. Semi-Solid Microstructure Control of Wrought Al-Mg-Si Based Alloys with Fe and Mn Additions in Deformation-Semi-Solid-Forming Process, Materials Transations, Vol. 52, No. 5, pp. 834-841, May 2011.
• JaeHwang Kim, Equo Kobayashi, Tatsuo Sato. Effects of Cu Addition on Behavior of Nanoclusters during Multi-Step Aging in Al-Mg-Si Alloys, Materials Transations, Vol. 52, No. 5, pp. 906-913, May 2011.
• Tomo Ogura, Shoichi Hirosawa, Akio Hirose, Tatsuo Sato. Effects of Microalloying Tin and Combined Addition of Silver and Tin on the Formation of Precipitate Free Zones and Mechanical Properties, Materials Transactions, Vol. 52, No. 5, pp. 900-905, Apr. 2011.
• 中村吉男, 里達雄. Ag添加したAl-Mg-Si合金における中間相のHRTEM観察, 日本金属学会誌, Vol. 75, No. 3, pp. 179-187, Mar. 2011.
• YOSHIO NAKAMURA, TATSUO SATO. Effect of Silver Addition on the b'-Phase in Al-Mg-Si-Ag Alloy, Materials Transactions, The Japan Institute of Metals, Vol. 51, No. 2, pp. 310-316, Feb. 2011.
• J Kim, Tatsuo Sato. Effects of Cu Addition on Nanocluster Formation and Two-Step Aging Behaviors of Al–Mg–Si Alloys, Journal of Nanoscience and Nanotechnology,, Vol. 11, pp. 1319-1322, 2011.
• Yoshihiro Terada, Tatsuo Sato. Assessment of Creep Rupture Life of Heat Resistant Mg-Al-Ca Alloys, Journal of Alloys and Compounds, Vol. 504, pp. 261-264, June 2010.
• A. Serizawa, Tatsuo Sato, W.J. Poole. The characterization of dislocation-nanocluster interactions in Al-Mg-Si(-Cu/Ag) alloys, Phil. Mag. Letters, Vol. 90, No. 4, pp. 279-287, Apr. 2010.
• R. Hu, T. Ogura, H. Tezuka, Tatsuo Sato, Q. Liu. Dispersoid Formation and Recrystallization Behavior in an Al-Mg-Si-Mn Alloy, Journal of Materials Science and Technology, Vol. 26, No. 3, pp. 237-243, Mar. 2010.
• 髙久 茜, 小林郁夫, 里 達雄, 廣瀬清慈, 江口立彦. Si濃度の異なるCu-Ni-Si合金の時効硬化挙動および析出量の解析, 銅と銅合金, Vol. 49, No. 1, pp. 29-34, Jan. 2010.
• Tomo Ogura, A. Hirose, Tatsuo Sato. Effect of PFZ and Grain Boundary Precipitate on Mechanical Properties and Fracture Morphologies in Al-Zn-Mg(Ag) Alloys, Mater. Sci. Forum, Vol. 638-642, pp. 297-302, 2010.
• Tomo Ogura, Shoichi Hirosawa, Alfred Cerezo, Tatsuo Sato. Atom probe tomography of nanoscale microstructures within precipitate free zones in Al-Zn-Mg(-Ag) alloys, Acta Materialia, Vol. 58, pp. 5714-5723, 2010.
• Yoshihiro Terada, Tomoyuki Enokida, Tatsuo Sato. Effect of Prior Deformation on Creep Behavior of a Die-Cast Mg-Al-Ca Alloy, Materials Transactions, Vol. 50, No. 10, pp. 2351-2354, Oct. 2009.
• Yoshihiro Terada, Daigo Itoh, Tatsuo Sato. Dislocation Analysis of Die-Cast Mg-Al-Ca Alloy after Creep Deformation, Materials Science and Engineering A, Vol. 523, pp. 214-219, Sept. 2009.
• Yoshihiro Terada, Daigo Itoh, Tatsuo Sato. Dislocation Movements during Creep in a Die-Cast AM50 Magnesium Alloy, Materials Chemistry and Physics, Vol. 117, pp. 331-334, Aug. 2009.
• Y. Nagai, T.Toyama, Z.Tang, K.Inoue, T.Chiba, M.Hasegawa, Tatsuo Sato. Interactions Between Fermi surfaces and Brillouin zone boundaries and phase stability of embedded metallic nanopartieles, PHYSICAL REVIEW B, Vol. 79, p. 201, May 2009.
• Yoshihiro Terada, Daigo Itoh, Tatsuo Sato. Creep Rupture Properties of Die-Cast Mg-Al-Ca Alloys, Materials Chemistry and Physics, Vol. 113, pp. 503-506, Jan. 2009.
• Daigo Itoh, Yoshihiro Terada, Tatsuo Sato. Effect of Calcium Additions on Creep Properties of a Die-Cast AM50 Magnesium Alloy, Materials Transactions, Vol. 49, No. 9, pp. 1957-1962, Sept. 2008.
• T.Yoshida, W.Eidhed, HiroyasuTezuka, TatsuoSato. Controlled semisolid microstructures and mechanical properties of Al-Mg-Si-Mn wrought alloy prduced by D-SSF, International Journal of Cast Metals Research, Vol. 21, No. 1-4, pp. 174-179, Aug. 2008.
• M.Yabushita, T.Goda, Y.Ono, TatsuoSato, K.Oda, M.Shioda, HIROYASU TEZUKA. Evaluation of Young's modulus of high stiffness aluminium die cast alloys using nanoindentation technique, International Journal of Cast Metals Research, Vol. 21, No. 1-4, pp. 180-185, Aug. 2008.
• TATSUO SATO. Relationship between Minimun Creep Rate and Rupture Life for a Die-Cast Mg-Al-Mn Alloy, Materials Transactions, Vol. 49, No. 3, p. 439-442, Mar. 2008.
• Yoshihiro Terada, Tatsuo Sato. Relationship between Minimum Creep Rate and Rupture Life for a Die-Cast Mg-Al-Mn Alloy, Materials Transactions, Vol. 49, No. 3, pp. 439-442, Mar. 2008.
• A.Serizawa, S.HIROSAWA, T.SATO. Three-Dimensional Atom Probe Characterization of Nanoclusters Responsible for Multistep, Metallurgical and materials transactions A., Vol. 39A, No. 2, pp. 243-251, Feb. 2008.
• TATSUO SATO. Development of Deformation-Semisolid-Casting(D-SSC) Process and Applications to Some Aluminum Alloys, J. Materials Science and Technoligy, Vol. 24, No. 1, p. 12-16, Jan. 2008.
• 神野洋輔, 里 達雄, 廣瀬清慈, 江口立彦. Cu-Ni-Si系合金の粒界近傍組織形成に及ぼす液体化温度およびCr添加の影響, 銅と銅合金, Vol. 47, No. 1, pp. 43-49, Jan. 2008.
• Yoshihiro Terada, Tatsuo Sato. Long Term Creep Properties of a Die-cast Mg-Al-Ca Alloy, Mater. sci. forum, Vol. 561-565, pp. 163-166, Nov. 2007.
• Yoshihiro Terada, Naoya Ishimatsu, Tatsuo Sato. Creep Parameters in a Die-Cast Mg-Al-Ca Alloy, Materials Transactions, Vol. 48, No. 9, pp. 2329-2335, Sept. 2007.
• 里達雄. Cu-Ni-Si系合金の時効析出に及ぼす溶体化温度およびCr添加の影響, 銅と銅合金, 銅及び銅合金技術研究会, Vol. 46, No. 1, p. 26-30, July 2007.
• Yoshihiro Terada, Yukako Mori, Tatsuo Sato. Role of Eutectic Intermetallic Phase on Creep Strength in a Die-Cast Mg-Al-Ca Alloy:Evaluation by Internal Stress Measurement, Materials Transactions, Vol. 48, No. 2, pp. 97-100, Feb. 2007.
• Kenji Matsuda, Junya Nakamura, Yoshio Nakamura, Tatsuo Sato, Susumu Ikeno. Crystal structure of the β'-phase in Al-Mg-Si-Ag alloy, Materials Science Forum, Vol. 539-543, pp. 837-841, 2007.
• Junya Nakamura, Kenji Matsuda, Yoshio Nakamura, Tatsuo Sato, Susumu Ikeno. HRTEM OBSERVATION OF ROD-SHAPE PRECIPITATES IN Al-Mg-Si-Ag ALLOY AGED AT 523 K, Materials Science Forum, Vol. 561-565, pp. 543-546, 2007.
• 小椋　智, 廣澤渉一, 里　達雄. Al－Zn－Mg（－Ag）合金の耐力および伸びに及ぼす粒界近傍の析出組織の影響, 軽金属, Vol. 第56, No. 11, pp. 644-650, Nov. 2006.
• 廣澤渉一, 大村知也, 里　達雄, 鈴木義和. Al-3%Mg-1%Cu合金の時効硬化およびナノ析出組織に及ぼすAg添加の影響, 軽金属, Vol. 第56, No. 11, pp. 673-679, Nov. 2006.
• Yoshihiro Terada, Yukako mori, Tatsuo Sato. Internal Stress during Creep in a Die-cast AM50 Magnesium Alloy at 473K, MATER. TRANS., Vol. 47, No. 10, pp. 2493-2496, Oct. 2006.
• Junya Nakamura, Kenji Matsuda, Yoshio Nakamura, Tatsuo Sato, Susumu Ikeno. The effect of Ag-addition on crystal structure of β-phase in Al-Mg-Si alloy, Materials Science Forum, Vol. 519-521, pp. 511-514, 2006.
• 狩野宏和, 里　達雄, 廣瀬清慈, 江口立彦. Cu-Ni-Si系合金の時効析出挙動に及ぼすNi,Si量の影響, 銅と銅合金, Vol. 45, No. 1, pp. 115-119, 2006.
• NAOYA ISHIMATSU, YOSHIHIRO TERADA, TATSUO SATO, KOICHI OHORI. Creep Characteristics of a Diecast AM50 Magnesium Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A, Vol. 37A, pp. 243-248, 2006.
• Kenji Matsuda, Susumu Ikeno, Tatsuo Sato, Yasuhiro Uetani. New Quaternary Grain Boundary Precipitate in Al-Mg-Si Alloy Containing Silver, Scripta Materialia, Vol. 55, pp. 127-129, 2006.
• KENJI MATSUDA, SUSUMU IKENO, HIROAKI MATSUI, TATSUO SATO, KIYOSHI TERAYAMA, YASUHIRO UETANI. Comparison of Precipitates between Excess Si-Type and Balanced-Type Al-Mg-Si Alloys during Continuous Heating, METALLURGICAL AND MATERIALS TRANSACTIONS A, Vol. 36A, No. 8, pp. 2007-2012, Aug. 2005.
• Shoichi Hirosawa, Yoshifumi Oguri, Tatsuo Sato. Experimental and Computational Investigation of Formation of Precipitate Free Zones in an Al-Cu Alloy, Ｍaterials Transactions, Vol. 46, No. 6, pp. 1230-1234, June 2005.
• F. Nakamura, T. Hoshino, S. Tanaka, K. Hirose, S.Hirosawa, T.Sato. Full-potential KKR calculations for point-defect interaction energies in Al, based on the generalized gradient approximation: two-body and many-body interactions, Trans. Materials Research Society of Japan, Vol. 30, pp. 873-876, 2005.
• 里　達雄　　狩野　宏和 田中　信行　 江口　立彦. Cu-Ni-Si系合金の時効硬化現象および熱処理条件の影響, 銅と銅合金, Vol. 44, No. 1, pp. 2005, 2005.
• K.MATSUDA, S.IKENO T.SATO. HRTEM observation of the fine precipitate at the early stage of aging in Al-Mg-Si-Cu alloy, Archives of Materials Science, Vol. 26, No. 1-2, pp. 59-63, 2005.
• Yukako Mori, Yoshihiro Terada, Tatsuo Sato. Microstructure Stability and Creep Strength in a Die-Cast AX52 Magnesium Alloy, Materials Transactions, Vol. 46, No. 8, pp. 1749-1752, 2005.
• 里　達雄, 上野仁士, 手塚裕康. 加工ー半溶融鋳造プロセスによるAl-Si-Cu-Fe合金の組織制御と機械的性質の改善, 鋳造工学, Vol. 77, No. 8, pp. 547-553, 2005.
• Yoshihiro Terada, Naoya Ishimatsu, Yukako Mori, Tatsuo Sato. Eutectic Phase Investigation in a Ca-added AM50 Magnesium Alloy Produced by Die Casting, Materials Transactions, Vol. 46, No. 2, pp. 145-147, 2005.
• 廣澤 渉一, 里 達雄. モンテカルロ・シミュレーションによる合金の相分解挙動解析, 軽金属, Vol. 54, No. 3, pp. 121-127, Mar. 2004.
• Y.TERADA, R.SOTA, N.ISHIMATSU, T.SATO, K.OHORI. A Thousandfold Creep Strengthening by Ca Addition in Die-Cast AM50 Magnesium Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A, Vol. 35A, pp. 3029-3032, 2004.
• P.Ashtari, H.Tezuka, T.Sato. Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys, Scripta Materialia, Vol. 51, pp. 42-46, 2004.
• Tomo Ogura, Shoichi Hirosawa, Tatsuo Sato. Quantitative characterization of precipitate free zones in Al-Zn-Mg(-Ag)alloys by microchemical analysis and nanoindentation measurement, Science and Technology of Advanced Materials, Vol. 5, pp. 491-496, 2004.
• 茂泉　健, 手塚裕康, 里　達雄. Cuを添加したAC4Cアルミニウム鋳造合金の析出組織と熱疲労寿命, 軽金属, Vol. 53, No. 12, pp. 588-594, Dec. 2003.
• 茂泉　健, 手塚裕康, 里　達雄. シリンダヘッド用 Al-Si-Mｇ系鋳造合金の機械的性質と熱疲労寿命に及ぼす Cu，Ｍｇ添加の影響, 鋳造工学, Vol. 75, No. 6, pp. 397-402, 2003.
• P.Ashtari, H.Tezuka, T.Sato. Influence of Sr and Mn Addition on Intermetallic Compound Morphologies in Al-Si-Cu-Fe Cast Alloys, Mater. Trans, Vol. 44, No. 12, pp. 2611-2616, 2003.
• J.M.Lee, S.B.Kang, C.Y.Lim, T.Sato, G.S.Cho. Combination of Reinforcing Powders and Matrix Alloys for Fabrication of Aluminum Matrix Composites by Plasma Synthesis Method, METALS AND MATERIALS International, Vol. 9, No. 5, pp. 459-465, 2003.
• J.M.Lee, S.B.Kang, T.Sato, H.Tezuka A.Kamio. Evolution of iron aluminide in Al/Fe in situ composites fabricated by plasma synthesis method, Materials Sience amd Engineering, Vol. A362, pp. 257-263, 2003.
• Yoshihiro Terada, Naoya Ishimatsu, Rie Sota, Tatsuo Sato, Koishi Ohori. Creep Characteristics of Ca-added Die-Cast AM50 Magnesium Alloys, Mater. sci. forum, Vol. 419-422, pp. 459-464, 2003.
• T.SATO, S.HIROSAWA K.HIROSE, T.MAEGUCHI. Roles of Microalloying Elements on the Cluster Formation in the Initial Stage of Phase Decomposition of Al-Based Alloys, Metll. Mater. Trans., Vol. 34A, No. 12, pp. 2745-2755, 2003.
• Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka, Akihiko Kamio. Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method, Materials Transacions, Vol. 43, No. 7, pp. 1638-1646, July 2002.
• 石松尚也, 曽田理恵, 寺田芳弘, 里　達雄, 大堀紘一. Mg-Al-Caダイカスト合金におけるクリープと組織安定性, 軽金属学会第102回春期大会概要, pp. 321,322, 2002.
• 手繰大輔, 松田健二, 里　達雄, 池野　進. Cu添加したAl-Mg-Si合金Q'相のFETEM観察, 軽金属学会第102回春期大会講演概要, pp. 101,102, 2002.
• 手繰大輔, 松田健二, 里　達雄, 池野　進. Al-Mg-Si-Cu合金における中間相のFETEM観察, 軽金属学会第103回秋期大会概要, pp. 69,70, 2002.
• K.Moizumi, K.Mine, H.Tezuka, T.Sato. Influence of Precipitate Microstructures on Thermal Fatigue Properties of Al-Si-Mg Cast alloys, Materials science Forum, Vol. 396-402, pp. 1371-1376, 2002.
• 手塚裕康, 坂井知典, 里　達雄, 神尾彰彦. Cu-Sn-Zn合金の半溶融加圧凝固組織, 銅及び銅合金技術研究会講演会概要集, pp. 15, 2002.
• 松崎雅史, 手塚裕康, 里　達雄. 純アルミニウムの結晶粒微細化におけるボロンの役割, 日本鋳造工学会第141回講演概要集, pp. 87, 2002.
• 能本和幸, 手塚裕康, 里　達雄, 神尾彰彦. 加工を施したAl-7%Si-3%Cu-1%Fe合金の半溶融鋳造組織と機械的性質, 日本鋳造工学会第140回講演概要集, pp. 98, 2002.
• 松崎雅史, 手塚裕康, 里　達雄. Al-B系化合物によるアルミニウムの結晶粒微細化, 日本鋳造工学会第140回講演概要集, pp. 14, 2002.
• 前口貴治, 廣澤渉一, 里　達雄. Al-Mg-Si合金の時効硬化および二段時効挙動に及ぼすAg,Cu微量添加の影響, 日本金属学会第131回秋期大会概要, pp. 551, 2002.
• 手繰大輔, 松田健二, 里　達雄, 池野　進. Al-Mg-Si-Cu合金における析出物のEFTEM観察, 日本金属学会第131回秋期大会概要, pp. 551, 2002.
• 谷口昇平, 松田健二, 里　達雄, 池野　進. 423Kで時効したAl-Mg-Si-Cu合金における析出物のHRTEM観察, 日本金属学会第131回秋期大会概要, pp. 550, 2002.
• 里　達雄, 松田健二. 最近のAl系合金におけるGPゾーンの構造解析, 電子顕微鏡, Vol. 37, No. 1, pp. 29-34, 2002.
• 前口貴治, 山田健太郎, 里　達雄. Al-1.3mass%Mg₂Si合金の時効硬化に及ぼす微量添加元素の影響, 日本金属学会誌, Vol. 66, No. 3, pp. 127-130, 2002.
• 廣瀬清慈, 里　達雄. Al-Cu合金の相分解初期における微量添加元素の挙動とその計算機シミュレーション, 軽金属, Vol. 52, No. 2, pp. 64-70, 2002.
• 松田健二, 里　達雄. 透過型電子顕微鏡による材料の組織解析-析出組織の観察・解析の手法と注意点, 軽金属, Vol. 52, No. 3, pp. 136-147, 2002.
• Kenji Matsuda, Daisuke Teguri, Tatsuo Sato, Susumu Ikeno. EFTEM Observation of Q' Phase in Al-Mg-Si-Cu Alloy, Materials Science Forum, Vol. 396-402, pp. 947-952, 2002.
• K. Kido, K. Matsuda, T. Kawabata, T. Sato, S.Ikeno. HRTEM Observation of Precipitates in Al-Mg-Si Alloy Containing Copper at Early Stage during Aging, Materials Science Forum, Vol. 396-402, pp. 953-958, 2002.
• Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka, Akihiko Kamio. Microstructures and Mechanical Properties of Al₃Fe Reinforced Aluminum Matrix Composites Fabricated by a Plasma Synthesis Method, Mater. Trans. JIM., Vol. 43, No. 10, pp. 2487-2493, 2002.
• Kenji Matsuda, Tokimasa Kawabata, Yasuhiro Uetani, Tatsuo Sato, Susum Ikeno. Hexagonal tabular β-phase in Al-Mg-Si-Cu alloy, Scripta Mater., Vol. 47, pp. 467-471, 2002.
• 茂泉　健, 手塚裕康, 里　達雄. Al-Si-Mg系鋳造合金の熱疲労挙動に及ぼすミクロ組織の影響, 軽金属学会第103回秋期大会概要, pp. 53,54, 2002.
• 松田健二, 石田義貴, 里　達雄, 池野　進. 時効したAl-Mg-Si-Cu合金に現れる六角形板状析出物, 日本金属学会第131回秋期大会概要, pp. 550, 2002.
• 里　達雄. ナノクラスタ制御による高性能アルミニウム合金の開発, 日本金属学会第131回秋期大会概要, pp. 549, 2002.
• 小椋　智, 廣澤渉一, 里　達雄. ナノインデンテーション法によるAl-Zn-Mg合金のPFZの定量的評価, 日本金属学会第131回大会概要, pp. 543, 2002.
• 廣瀬清滋, 廣澤渉一, 里　達雄. マイクロアロイング元素を含むAl-Cu合金の相分解初期におけるナノマルチ析出, 日本金属学会第131回秋期大会概要, pp. 543, 2002.
• 里　達雄, 廣瀬清慈, 廣澤渉一. 析出相変態におけるナノクラスタ形成と組織形成機構, 日本金属学会第131回秋期大会講演概要, pp. 76, 2002.
• アシタリ　ペイマン, 手塚裕康, 里　達雄. Influence of Sr and Mn additions on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys, 軽金属学会第103回秋期大会概要, pp. 227,228, 2002.
• 寺田芳弘, 石松尚也, 曽田理恵, 里　達雄, 大堀紘一. AM50ダイカスト合金のクリープに及ぼすCa添加の影響, 軽金属学会第103回秋季大会概要, pp. 131,132, 2002.
• 福田　正, 手塚裕康, 里　達雄. 熱間圧延および焼なまし条件により組織制御したAZ31合金の機械的性質, 軽金属学会第103回秋期大会概要, pp. 119,120, 2002.
• 廣澤渉一, 里　達雄. モンテカルロシミュレーションによるAl-Cu合金の初期相変態挙動解析と実時間との対応, 軽金属学会第103回秋期大会概要, pp. 101,102, 2002.
• 大江　力, 廣澤渉一, 里　達雄. Al-Si-Ge合金の析出硬化およびCu添加の影響, 軽金属学会第103回秋期大会概要, pp. 97,98, 2002.
• 中村文滋, 廣澤渉一, 里　達雄. Al-0.6%Zr合金の析出挙動に及ぼすSiおよびGe添加の影響, 軽金属学会第103回秋期大会概要, pp. 87,88, 2002.
• 松田健二, 石田義貴, 里　達雄, 池野　進. 時効したAl-Mg-Si-Cu合金における六角形状析出物のTEM観察, 軽金属学会第103回秋期大会概要, pp. 73,74, 2002.
• 吉田　晃, 手塚裕康, 里　達雄. AC4CH合金の半溶融組織制御へのECAP加工法の適用, 軽金属学会第102回春期大会概要, pp. 343,344, 2002.
• 石松尚也, 曽田理恵, 寺田芳弘, 里　達雄, 大堀紘一. ダイカストAM50マグネシウム合金におけるクリープ, 軽金属学会第102回春期大会概, pp. 319,320, 2002.
• Kenji Matsuda, Daisuke Teguri, Yasuhiro Uetani, Tatsuo Sato, Susumu Ikeno. Cu-segregation at the Q'/α-Al interface in Al-Mg-Si-Cu alloy, Scripta Materialia, Vol. 47, pp. 833-837, 2002.
• Kenji MATSUDA, Tokimasa KAWABATA, Yasuhiro UETANI, Tatsuo SATO, Susumu IKENO. High-resolution elemental maps for three directions of Mg2Si phase in Al-Mg-Si alloy, Materials Science, pp. 3369-3375, 2002.
• 松田健二, 手操大輔, 里　達雄, 池野　進. Cu添加したAl-Mg-Si合金における中間相のEFTEM観察, 日本金属学会第129回秋期大会講演概要, pp. 217, 2001.
• 廣瀬清慈, 廣澤渉一, 里　達雄. Al-Cu合金の相分解における焼入れ過剰空孔と微量元素の役割, 日本金属学会第129回秋期大会講演概要, pp. 217, 2001.
• 里　達雄, 廣瀬清慈. 高分解能電顕を用いた析出強化アルミニウム合金のナノ析出相の解析, 日本金属学会第129回秋期大会講演概要, pp. 100, 2001.
• 前口貴治, 山田健太郎, 里　達雄. Al-1.3mass%Mg2Si合金の時効硬化に及ぼす微量添加元素の影響, 日本金属学会第129回秋期大会講演概要, pp. 211, 2001.
• 田渕満智, 手塚裕康, 里　達雄, 神尾彰彦. 半溶融プロセスによるMg-Zn-Zr合金のα-Mg相の組織制御, 日本鋳造工学会第139回講演概要集, pp. 53, 2001.
• 能本和幸, 手塚裕康, 里　達雄, 神尾彰彦. 高濃度の鉄を含むAC4B合金の半溶融プロセスによる組織制御, 日本鋳造工学会第139会講演概要集, pp. 54, 2001.
• 里達雄. マグネシウム系時効析出合金, 金属, Vol. 71, No. 6, pp. 530-538, 2001.
• 里達雄. 高強度アルミニウム合金の相分解と組織制御, ふぇらむ, Vol. 6, No. 10, pp. 787-792, 2001.
• 茂泉　健, 峯憲一郎, 手塚裕康, 里　達雄. AC4Cアルミニウム合金のミクロ組織と熱疲労挙動, 軽金属学会第101回春期大会講演概要, pp. 69, 2001.
• 曽田理恵, 寺田芳弘, 里　達雄, 大堀紘一. Mg-Al系合金の微視的組織に及ぼすCa添加の影響, 軽金属学会第101回春期大会講演概要, pp. 315, 2001.
• K. Matsuda, T. Kawabata, Y. Uetani, T. Sato, S. Ikeno. Metastable Phases in an Al-Mg-Si Alloy Containing Copper, Met. Mater. Trans. A, Vol. 32A, pp. 1293-1299, 2001.
• S. Y. Chang, T. Nakagaido, S.K. Hong, D.H.Shin, T. Sato. Effect of Yttrium on High Temperature Strength of Magnesium, Mater. Trans., Vol. 42, No. 7, pp. 1332-1338, 2001.
• 山田健太郎, 里　達雄, 神尾彰彦. Formation of Clusters and two-step aging behavior of Al-Mg-Si alloys, J. Jpn. Inst. Light Metals, Vol. 51, No. 4, pp. 215-221, 2001.
• S. Hirosawa, T. Sato. Monte Carlo computer simulation of the atomistic behaviour of microalloying elements in Al-Li alloys, Modelling Simul. Mater. Sci. Eng., Vol. 9, pp. 129-141, 2001.
• 山田健太郎, 里　達雄, 神尾彰彦. Al-Mg-Si系合金におけるクラスタ形成と二段時効挙動, 軽金属, Vol. 51, No. 4, pp. 215-221, 2001.
• 里　達雄, 吉田　晃, 手塚裕康. 圧延及びECAP加工によりひずみ導入したAl-Si系合金の半溶融凝固組織, 日本鋳造工学会第139会講演概要集, pp. 58, 2001.
• 吉田　晃, 手塚裕康, 里　達雄, Ki-Seung Lee, Si-Young Chang, Dong-Hyuk Shin. ECAP加工を施したAC4CH合金の半溶融組織制御, 日本鋳造工学会第139会講演概要集, pp. 59, 2001.
• 茂泉　健, 峯憲一郎, 手塚裕康, 里　達雄. ディーゼルエンジン用シリンダヘッドに適するAl-Si-Mg系鋳物合金の開発, 日本鋳造工学会第139会講演概要集, pp. 60, 2001.
• 廣瀬清慈, 里　達雄. Al-Cu合金の相分解初期における微量添加元素の挙動と計算機シミュレーション, 軽金属学会第100回春期大会講演概要, pp. 171, 2001.
• 曽田理恵, 中村文滋, 里　達雄, 大堀紘一. Mg-Al-Ca合金ダイカスト材の微視的組織の透過電顕観察, 軽金属学会第100回春期大会講演概要, pp. 381, 2001.
• 山田健太郎, 里　達雄. Al-Mg-Si系合金の初期時効における焼入れ過剰空孔の役割, 軽金属学会第101回春期大会講演概要, pp. 47, 2001.
• 藤原英道, 里　達雄, 神尾彰彦. 冷間圧延および焼鈍過程における析出型銅合金の組織および特性変化挙動, 日本金属学会誌, Vol. 64, No. 8, pp. 641-650, 2000.
• 山田健太郎, 里　達雄, 神尾彰彦. Al-Mg-Si系合金における溶質－空孔クラスタの形成と二段時効挙動, 軽金属学会第９８回春期大会講演概要, pp. 197-198, 2000.
• 廣瀬清慈, 里　達雄, 神尾彰彦. 微量元素を添加したAl-Cu合金における複合クラスタ形成と相分解, 軽金属学会第９８回春期大会講演概要, pp. 257-258, 2000.
• 川畑常眞, 松田健二, 里　達雄, 神尾彰彦, 池野　進. 室温で予備時効した過剰Si型Al-Mg-Si合金における初期生成物のHRTEM観察, 軽金属学会第９８回春期大会講演概要, pp. 261-262, 2000.
• 松田健二, 酒井智幸, 常田貴志, 里　達雄, 池野　進. 銅添加したAl-Mg-Si合金における析出物の観察, 軽金属学会第９９回秋期大会講演概要, pp. 173-174, 2000.
• 里　達雄, 鈴木正章, 神尾彰彦. Al-Mg-Si-Mn系合金の焼入れ感受性に及ぼすMn系分散相の影響, 軽金属学会第９９回秋期大会講演概要, pp. 253-254, 2000.
• 山田健太郎, 里　達雄, 神尾彰彦. Al-Mg-Si系合金におけるクラスタ形成と二段時効挙動, 日本金属学会第１２７回秋期講演概要, pp. 288, 2000.
• 中村吉男, 里　達雄, 松田健二, 池野　進. Al-Mg-Si合金に出現する析出物の結晶構造, 日本金属学会第１２７回秋期講演概要, pp. 289, 2000.
• 松田健二, 酒井智幸, 常田貴志, 里　達雄, 池野　進. 時効したAl-Mg-Si-Cu合金における平衡相の分析電件観察, 日本金属学会第１２７回秋期講演概要, pp. 289, 2000.
• 廣瀬清慈, 里　達雄. 微量元素添加したAl-Cu合金の相分解初期過程における複合クラスタ形成, 日本金属学会第１２７回秋期講演概要, pp. 291, 2000.
• 中村文滋, 八若佐知, 里　達雄. L12型(Al,Cr)3Ti金属間化合物における析出組織 , 日本金属学会第１２７回秋期講演概要, pp. 427, 2000.
• 黒木康徳, 田中　徹, 里　達雄, 神尾彰彦. Al-Si-Cu-Mg合金鋳物の疲労特性に及ぼす鋳造欠陥とFe系化合物の影響, 軽金属, Vol. 50, No. 3, pp. 116-120, 2000.
• Kentarou Yamada, Tatsuo Sato, Akihiko Kamio. Effects of Quenching Conditions on Two-Step Aging Behavior of Al-Mg-Si Alloys, Materials Science Forum, Vol. 331-337, pp. 669-674, 2000.
• TATSUO SATO. Early Stage Phenomena and Role of Microalloying Elements in Phase Decomposition of Aluminum Alloys, Materials Science Forum, Vol. 331-337, pp. 85-96, 2000.
• Shoichi Hirosawa, Tatsuo Sato, Akihiko Kamio, H.M.Flower. Classification of the Role of Microalloying Elements in Phase Decomposition of Al Based Alloys, Acta Mater., Vol. 48, pp. 1797-1806, 2000.
• K. Matsuda, T. Kawabata, T. Sakai, T. Sato A. Kamio, S. Ikeno. High Resolution Elemental Maps of Precipitates in Al-Mg-Si Alloy by EFTEM, Materials Science Forum, Vol. 331-337, pp. 1119-1124, 2000.
• Kenichi Yaguchi, Hiroyasu Tezuka, Tatsuo Sato, Akihiko Kamio. Grain Refinement of Cast Al Alloys by Al-B Master Alloy, Materials Science Forum, Vol. 331-337, pp. 391-396, 2000.
• Kenji Matsuda, Tokimasa Kawabata, Yasuhiro Uetani, Tatsuo Sato, Akihiko Kamio, Susumu Ikeno. HRTEM Observation of G.P. Zones and Metastable Phase in Al-Mg-Si Alloys, Materials Science Forum, Vol. 331-337, pp. 989-994, 2000.
• 黒木康徳, 田中 徹, 里 達雄, 神尾彰彦. Al-Cu系合金鋳物の疲労特性に及ぼす溶湯清浄度の影響, 鋳造工学, Vol. 71, No. 6, pp. 379-384, June 1999.
• 横田純一, 廣澤渉一, 里 達雄, 神尾彰彦. Al-Li合金のδ'相析出に及ぼすCuおよびMg微量添加の影響の計算機シミュレーション, 軽金属, Vol. 49, No. 2, pp. 51-56, Feb. 1999.
• 山田健太郎, 神尾彰彦, 里達雄. 中断焼入れしたAl-Mg-Si系合金の二段時効挙動, 軽金属, Vol. 49, No. 9, pp. 450-451, 1999.
• 里達雄. アルミニウム合金の相分解初期構造と焼入れ空孔およびマイクロアロイングの役割, 日本金属学会第125回秋期大会講演概要, pp. 73, 1999.
• 三角美知, 田中　直, 神尾彰彦, 里達雄. Al-Sc合金におけるAl3Sc相の析出および再結晶挙動, 軽金属学会第96回春期大会講演概要, pp. 183-184, 1999.
• TATSUO SATO. High Resolution Energy Filtering Transmission Electron Microscopy for Equilibrium β-phase in an Al-Mg-Si Alloy, Scripta Materialia, Vol. 41, pp. 379-383, 1999.
• Mingyi Zheng, Kun Wu, Congkai Yao, Tatsuo Sato, Hiroyasu Tezuka, Akihiko Kamio, D.X.Li. Interfacial bond between SiCw and Mg in squeeze cast SiCw/Mg composites, Materials Letters, Vol. 41, pp. 57-62, 1999.
• Kenji Matsuda, Tsutomu Naoi, Kaname Fujii, Yasuhiro Uetani, Tatsuo Sato, Akihiko Kamio, Susumu Ikeno. Crystal Structure of the β" Phase in an Al-1.0mass%Mg2Si-0.4mass%Si Alloy, Materials science and engineering A, Vol. 262, pp. 232-237, 1999.
• 松田健二, 川畑常眞, 直井 勉, 上谷保裕, 蓮覚寺聖一, 里 達雄, 神尾彰彦, 池野 進. シリコンを過剰に含むAl-Mg-Si合金の二段時効における析出挙動, 日本金属学会誌, Vol. 62, No. 9, pp. 827-833, Sept. 1998.
• 藤原英道, 里 達雄, 神尾彰彦, 大瀧光弘. 析出相結晶構造に基づく銅合金設計, 伸銅技術研究会誌, Vol. 37, pp. 106-115, Aug. 1998.
• 松田健二, 吉田朋夫, 和田智美, 吉田 愛, 上谷保裕, 里 達雄, 神尾彰彦, 池野 進. 過剰にマグネシウムを含むAl-Mg-Si合金の析出過程, 日本金属学会誌, Vol. 62, No. 8, pp. 718-726, Aug. 1998.
• 鄭 秉準, 里 達雄, 手塚裕康, 神尾彰彦, 才川清二, 中井清之. 半溶融凝固法により製造したAl-7%Si-0.5%Mg合金の微細組織と機械的性質, 軽金属, Vol. 48, No. 7, pp. 329-334, July 1998.
• 藤原英道, 里 達雄, 神尾彰彦. Cu-Ni-Si系合金中の析出挙動に及ぼす合金組成の影響, 日本金属学会誌, Vol. 62, No. 4, pp. 301-309, Apr. 1998.
• 松田健二, 吉田朋夫, 蒲田裕志, 藤井 要, 上谷保裕, 里 達雄, 神尾彰彦, 池野 進. 二段時効したAl-1.6%Mg2Si合金の析出組織の高分解能透過型電顕観察, 日本金属学会誌, Vol. 62, No. 2, pp. 133-139, Feb. 1998.
• Shoichi Hirosawa, Tatsuo Sato, Junichi Yokota, Akihiko Kamio. Comparison Between Resistivity Changes and Monte Carlo Simulation for GP Zone Formation in Al-Cu Base Ternary Alloys, Materials Transactions, JIM, Vol. 39, No. 1, pp. 139-146, Jan. 1998.
• TATSUO SATO. High-Resolution Electron Microscopy on the Structure of Guinier-Preston Zones in an Al-1.6 Mass Pct Mg┣D22┫D2Si Alloy, Metallurgical and Materials Transactions, Vol. 29A, No. 4, pp. 1161-1167, 1998.
• TATSUO SATO. Precipitation Behavior of P/M Hypereutectic Al-Si-Cu-Mg Alloys Containing Fe and Ni, Materials Transactions, JIM., Vol. 39, No. 3, pp. 357-364, 1998.
• TATSUO SATO. Effects of Mg addition on the kinetics of low-temperature precipitation in Al-Li-Cu-Ag-Zr alloys, Materials Science & Engineering A, Vol. A242, pp. 195-201, 1998.
• 田原和典, 鄭 秉準, 手塚裕康, 里 達雄, 神尾彰彦. 結晶微細化した亜共晶Al-Si-Cu合金の半溶融加圧鋳造組織と機械的性質, 軽金属, Vol. 47, No. 11, pp. 620-625, Nov. 1997.
• 里 達雄, 植田菜摘, 神尾彰彦. Cu-Ni-Sn合金の変調構造および不連続析出に及ぼすMn添加の影響, 伸銅技術研究会誌, Vol. 36, pp. 65-74, Aug. 1997.
• 松田健二, 蒲田裕志, 藤井 要, 吉田朋夫, 里 達雄, 神尾彰彦, 池野 進. Al-Mg2Si系合金における準安定相の高分解能電子顕微鏡観察, 軽金属, Vol. 47, No. 8, pp. 493-499, Aug. 1997.
• R.M.Gomes, TATSUO SATO, AKIHIKO KAMIO. Microstructures and coarsening behavior of silicon particles in P/M Al-Si-Cu-Mg alloys containing Fe and Ni, Journal of Japan Light Metalls, Vol. 47, No. 2, pp. 90-97, Feb. 1997.
• 里達雄. ひずみ導入したAl-7%Cu-0.5%Mg合金の半溶融凝固組織, 軽金属, Vol. 47, No. 11, pp. 626-631, 1997.
• Shoichi HIROSAWA, Tatsuo SATO, Akihiko KAMIO, Kazuhiro KOBAYASHI, Toshimasa SAKAMOTO. Effects of additional elements and quenching conditions on the T1 phase precipitation in Al-1.3%Li-5.5%Cu-0.13%Zr Alloys (Translation), Light Metals Review, Vol. 4, pp. 14-20, 1997.
• 洪 性吉, 崔 政喆, 林 徳仲, 手塚裕康, 里 達雄, 神尾彰彦. SiCウィスカ強化Al-CuおよびAl-Cu-Mg合金基複合材料の時効硬化挙動, 日本金属学会誌, Vol. 60, No. 6, pp. 569-576, June 1996.
• 張 茂勲, 陳 暁, 銭 匡武, 洪 性吉, 手塚裕康, 里 達雄, 神尾彰彦. Al2O3-SiO2繊維強化アルミニウム合金複合材料の組織及び機械的性質, 鋳造工学, Vol. 68, No. 5, pp. 411-416, May 1996.
• 廣澤渉一, 里 達雄, 神尾彰彦, 小林一徳, 坂本敏正. Al-1.3%Li-5.5%Cu-0.13%Zr系合金におけるT1相の粒内析出に及ぼす微量添加元素および焼入れ条件の影響, 軽金属, Vol. 46, No. 3, pp. 119-125, Mar. 1996.
• TATSUO SATO. A Metastable Phase Having the Orthorhombic Crystal Lattice in an Al-1.0mass%Mg₂Si-0.4mass%Si Alloy, Scripta Materialia, Vol. 34, No. 11, pp. 1797-1802, 1996.
• Kenji Matsuda, Shizuo Tada, Susumu Ikeno, Tatsuo Sato, Akihiko Kamio. CRYSTAL SYSTEM OF ROD-SHAPED PRECIPITATES IN AN Al-1.0mass%Mg2Si-0.4mass%Si ALLOY, Scripta Met.. Mater., Vol. 32, No. 8, pp. 1175-1180, Aug. 1995.
• 藤原英道, 里 達雄, 神尾彰彦. Cu-1 mass%Fe合金の析出挙動に及ぼすりん微量添加の影響, 日本金属学会誌, Vol. 59, No. 5, pp. 502-511, May 1995.
• 細田秀樹, 里 達雄, 手塚裕康, 三島良直, 井上漢龍, 神尾彰彦, 篠田哲守. 遷移金属トリアルミナイドAl3Nbの欠陥構造と添加元素置換サイトの擬基底状態解析による計算, 軽金属, Vol. 44, No. 11, pp. 675-681, Nov. 1994.
• 細田秀樹, 里 達雄, 手塚裕康, 三島良直, 神尾彰彦. Al-Li合金中のL12型Al3Li準安定相における添加元素置換挙動, 日本金属学会誌, Vol. 58, No. 8, pp. 865-871, Aug. 1994.
• TATSUO SATO. Substitution Behavior of Additional Elements in the L1┣D22┫D2-Type Al┣D23┫D2Li Metastable phase in Al-Li Alloys, Journal of the Japan Institute of Metals, Vol. 58, No. 8, pp. 865-871, 1994.
• TATSUO SATO. Effects of Additional Elements of δ'Phase Stability in Al-Li Alloys, Proceedings of the 4th International Conference on Aluminum Alloys, Vol. 2, pp. 698-705, 1994.
• 里 達雄, 高橋 功, 手塚裕康, 神尾彰彦. Mg-Y合金の時効析出組織, 軽金属, Vol. 42, No. 11, pp. 804-809, Nov. 1992.
• 神尾彰彦, 村上 雄, 里 達雄, 中村 桂. Cu-Ni-Ti-Sn合金の時効析出挙動, 伸銅技術研究会誌, Vol. 31, pp. 128-134, Aug. 1992.
• 小林一徳, 大崎修平, 神尾彰彦, 里 達雄, 辻 美紘. 微量Znを添加したAl-Li系合金の耐食性, 軽金属, Vol. 42, No. 4, pp. 211-216, Apr. 1992.
• 横田耕太郎, 小松原俊雄, 里 達雄, 神尾彰彦. Al-Mg-Si系合金のセレーションに及ぼす熱処理条件とCu添加の影響, 軽金属, Vol. 42, No. 3, pp. 149-154, Mar. 1992.
• TATSUO SATO. Chemical Composition Analysis of Precipitates with Analytical Electron Microscopy, Journal of Japan Institute of Light Metals, Vol. 42, No. 8, pp. 471-480, 1992.
• Kazunori Kobayashi, Shuhei Ohsaki, Akihiko Kamio, Tatsuo Sato, Yoshihiro Tsuji. Effect of Zn Addition on Corrosion Resistance of 2090 and 2091 Alloys, Aluminium-Lithium, Vol. 2, pp. 673-678, 1992.
• Tatsuo Sato, Akihiko Kamio. High Resolution Microscopy on the Ordered Phase in Al-Li Alloys, Aluminium-Lithium, Vol. 1, pp. 57-62, 1992.
• TATSUO SATO. High Resolution Electron Microscopy of Phase Decomposition Microstructures in Aluminium-Based Alloys, Materials Science and Engineering, pp. 161-180, 1991.
• TATSUO SATO. Analytical Electron Microscopy of Precipitation in Al-Zr-Si Alloys, Science and Engineering of Light Metals, pp. 971-976, 1991.
• S. Ohsaki, T. Sato, T. Takahashi. Effect of aging on the pitting corrosion behavior in Al-Li alloys, Aluminium, Vol. 66, No. 6, pp. 656-572, June 1990.
• Tatsuo Sato, Akihiko Kamio. Ordered Structures in the Early Stage of Decomposition in an Al-7.9at%Li alloy, Materials Transactions of Japan Institute of Metals, Vol. 31, No. 1, pp. 25-30, Jan. 1990.
• TATSUO SATO. Phase Decomposition Microstructures and Formation Kinetics of Modulated Structure in a Cu-15wt%Ni-8wt%Sn Alloy, Journal of Japan Copper and Brass Research Association, Vol. 29, pp. 169-177, 1990.
• TATSUO SATO. Electron Microscopic Analysis of Composite Presipitates in an Al-2.21wt%Li-0.14wt%Zr Alloy, Scripta Metallurgica, Vol. 23, No. 3, pp. 447-452, 1989.
• Tatsuo Sato, Tsuneo Takahashi. High Resolution Electron Microscopy on the Layered Structures of GP Zones in an Al-1.7at%Cu Alloy, Scripta Met., Vol. 22, No. 7, pp. 941-946, July 1988.
• 大崎修平, 里 達雄, 高橋恒夫. Al-Li系合金の孔食挙動に及ぼす時効の影響, 軽金属, Vol. 38, No. 5, pp. 264-269, May 1988.
• TATSUO SATO. High Resolution Lattice Images of Ordered Stuctures in Al-Li Alloys, Transactions of Japan Institute of Metals, Vol. 29, No. 1, pp. 17-25, 1988.
• TATSUO SATO. Determination of Structure and Formation Kinetics of Early Stage GP Zones in an Al-1.7at%Cu Alloy by Small-Angle X-Ray Scattering of Synchrotron Radiation, Acta Metallurgica, Vol. 36, No. 5, pp. 1335-1341, 1988.
• 里 達雄, 高橋恒夫. Al-Li-Cu-Mg-Zr合金の析出現象と機械的特性, 軽金属, Vol. 36, No. 11, pp. 728-736, Nov. 1986.
• 高橋恒夫, 里 達雄. Al-Li合金の時効析出過程および構造変化, 軽金属, Vol. 36, No. 4, pp. 207-214, Apr. 1986.
• 高橋恒夫, 里 達雄. 高濃度Al-10, 14%Mg合金における変調構造および規則構造の形成, 日本金属学会誌, Vol. 50, No. 2, pp. 133-140, Feb. 1986.
• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong Long, 高橋恒夫. Al-Fe合金の急冷凝固組織と相分解, 軽金属, Vol. 36, No. 2, pp. 72-80, Feb. 1986.
• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong LONG, 高橋恒夫. Al-Fe-Ce合金の急冷凝固組織と相分解, 軽金属, Vol. 35, No. 8, pp. 439-446, Aug. 1985.
• 高橋恒夫, 里 達雄. Al-4%Cu-1.5%Mg合金の初期時効と構造変化, 軽金属, Vol. 35, No. 1, pp. 41-49, Jan. 1985.
• 里 達雄, 高橋恒夫, 飯泉 仁, 土井健治. Al-10%Mg合金の室温時効過程, 軽金属, Vol. 34, No. 2, pp. 110-114, Feb. 1984.
• TATSUO SATO. Decomposition Structures of Rapidly Solidified Al-Cu Alloys, Journal of The Japan Institute of Metals, Vol. 48, No. 7, pp. 748-754, 1984.
• TATSUO SATO. High Resolution Electron Microscopy Studies on the Precipitation in an Al-4%Cu Alloy, Transactions of Japan Institute of Metals, Vol. 24, No. 6, pp. 386-395, 1983.
• TATSUO SATO. Structure of GP Zones in an Al-1.7at%Cu Alloy Aged for 14years at Room Temperature, Acta Metallurgica, Vol. 31, No. 10, pp. 1669-1673, 1983.
• Tatsuo Sato, Yo Kojima, Tsuneo Takahashi. Observation of the Microstructure of Pre-precipitates in an Al-3%Cu Alloy by a Lattice Imaging Technique, Trans. JIM, Vol. 23, No. 8, pp. 461-472, Aug. 1982.
• Tatsuo SATO, Tsuneo TAKAHASHI, Nobuo TANAKA, Kazuhiro MIHAMA. Observation of Lattice Images for θ' Precipitates in Al-4%Cu Alloys, Jpn. J. Appl. Physics, Vol. 21, No. 4, pp. L209-L211, Apr. 1982.
• TATSUO SATO. Modulated Structures and GP Zones in Al-Mg Alloys, Metallurgical Transactions A, Vol. 13A, No. 8, pp. 1373-1378, 1982.
• Hidetoshi Inoue, Tatsuo Sato, Yo Kojima, Tsuneo Takahashi. The Temperature Limit for GP Zone Formation in an Al-Zn-Mg Alloy, Met. Trans, Vol. 12A, No. 8, pp. 1429-1434, Aug. 1981.
• 里 達雄, 小島 陽, 高橋恒夫. 電顕格子像法によるAl-3%Cu合金の初期析出物の微細構造観察, 日本金属学会誌, Vol. 45, No. 8, pp. 803-811, Aug. 1981.
• 高橋恒夫, 小島 陽, 里 達雄, 井手籠隆. Al-Ag合金におけるG.P.ゾーンの生成および規則－不規則変態について, 軽金属, Vol. 30, No. 8, pp. 426-431, Aug. 1980.
• 里 達雄, 小島 陽, 高橋恒夫. Ｘ線散漫散乱強度測定による応力時効したAl-3%Cu合金のG.P.ゾーンの構造解析, 日本金属学会誌, Vol. 44, No. 4, pp. 371-377, Apr. 1980.
• 高橋恒夫, 小島 陽, 里 達雄, 大平 宏. Al-3%Cu合金単結晶の時効析出挙動に及ぼす応力付加の影響, 日本金属学会誌, Vol. 44, No. 4, pp. 366-370, Apr. 1980.
• Tatsuo Sato, Yo Kojima, Tsuneo Takahashi. A Study on the Temperature Limit for G.P. Zone Formation in Al-Zn Alloys, Trans. JIM, Vol. 20, pp. 475-482, 1979.
• 里 達雄, 小島 陽, 高橋恒夫. Al-CuおよびAl-Zn合金のG.P.ゾーン生成に及ぼす焼入れ温度の影響, 軽金属, Vol. 28, No. 10, pp. 506-513, Oct. 1978.
• 里 達雄, 小島 陽, 高橋恒夫. Al-Zn合金におけるG.P.ゾーンの挙動と生成限界温度について, 日本金属学会誌, Vol. 42, No. 7, pp. 702-708, July 1978.
• 里 達雄, 小島 陽, 高橋恒夫. Al-Cu合金におけるG.P.ゾーンの生成限界温度について, 軽金属, Vol. 27, No. 10, pp. 488-492, Oct. 1977.
• 高橋恒夫, 小島 陽, 里 達雄. Al-4%Cu合金およびAl-4%Cu-0.03%Sn合金の時効過程と復元現象について, 軽金属, Vol. 27, No. 1, pp. 3-10, Jan. 1977.

著書

• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Size Effect on the Electrodeposited Nickel Investigated by Micro-compression Test, Materials for Energy Infrastructure, Springer, Page 33-41, Jan. 2016.
• 里　達雄, 嵯峨常生, 柿本雅明, 上野久美雄, 佐藤正武, 矢内信義. 材料技術基礎 （材料の基礎から新素材まで）, 実教出版, Jan. 2007.
• 井上明久監修, 里達雄. ナノマテリアル工学体系 第2巻ナノ金属, フジ・テクノシステム, Vol. 第2, pp. 74-80, 465-472, Jan. 2006.
• H. Hosono, Y. Mishima, H. Takezoe, K.J.D. macKenzie, etc., TATSUO SATO. Nanomaterials From Research to Applications, Elsevier Ltd, pp. 315-346, 2006.
• 日本マグネシウム協会編, 里達雄. マグネシウム技術便覧, カロス出版, カロス出版, 2000.
• 里達雄. アルミニウム技術便覧(分担), カロス出版, カロス出版, 1996.
• 神尾彰彦編集, 里達雄. アルミニウムの組織と性質, 軽金属学会, pp. 32-48, Nov. 1991.

国際会議発表 (査読有り)

• Bourin Tei, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Effects of Grain Boundary on Mechanical Properties of Aluminum Alloy Observed by Bi-crystal Micro Compression Test, 9th Pacific RIM International Conference on Advanced Materials and Processing (PRICM9), The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), pp. 627-628, Aug. 2016.
• Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Takashi Nagoshi, Equo Kobayashi, Hideki Hosoda, Tatsuo Sato, Masato Sone. Precipitation Strengthening Behavior of Micro-Specimens Made of Cu-Ni-Si Alloy, The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Aug. 2016.
• Mark Chang, Wei-Hao Lin, Chun-Yi Chen, Yung-Jung Hsu, Chi-Chang Hu, TATSUO SATO, Masato Sone. Conducting Electrochemical Reactions with Supercritical Carbon Dioxide Emulsified Electrolyte, 66th Annual Meeting of the International Society of Electrochemistry, Oct. 2015.  公式リンク  
  
• Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Nagoshi Takashi, Equo Kobayashi, Hideki Hosoda, Tatsuo Sato, Masato Sone. Mechanical Properties of Cu-Ni-Si alloy Evaluated by Micro-Tensile Test for Application in MEMS, SSDM2015, 2015 International Conference on Solid State Devises and Materials, SSDM2015, 2015 International Conference on Solid State Devises and Materials, Sept. 2015.
• Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Takashi Nagoshi, Equo Kobayashi, Hideki Hosoda, Tatsuo Sato, Masato Sone. The Precipitation Strengthening Behavior of Cu-Ni-Si Alloy used as Micro-Components Evaluated by Micro-Tensile Tests, MNE2015, 41th International Conference on Micro and Nano Engineering, MNE2015, Sept. 2015.
• Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Equo Kobayashi, Tatsuo Sato, Masato Sone. Mechanical Property of Cu-Ni-Si Alloy Evaluated by a Micro-Compression Test, ICMAT2015 & IUMRS-ICA2015, ICMAT2015 & IUMRS-ICA2015, June 2015.
• Minami Teranishi, Tso-Fu Mark Chang, Toshifumi Konishi, Masaki Yano, Katsuyuki Machida, Daisuke Yamane, Hiroyuki Ito, Kazuya Masu, Tatsuo Sato, Masato Sone. Stability of Movable Structure Formed by Au Electroplating for MEMS Devices, ICMAT2015 & IUMRS-ICA2015,, ICMAT2015 & IUMRS-ICA2015,, June 2015.
• Takahisa Yasuda, Nao Okano, Tso-Fu Mark Chang, Masaki Tahara, Tomonari Inamura, Hideki Hosoda, Tatsuo Sato, Masato Sone. Mechanical Property of Ni-free Ti Based Shape Memory Alloys Evaluated by a Micro-compression Test, ICMAT2015 & IUMRS-ICA2015, ICMAT2015 & IUMRS-ICA2015, June 2015.
• Mitsuo Sano, Yuma Tahara, Tso-Fu Mark Chang, Tomoko Hashimoto, Hiromichi Kurosu, Tatsuo Sato, Masato Sone. Ni-P Electroless plating on Nylon Textile Using Supercritical Carbon Dioxide, ICMAT2015 & IUMRS-ICA2015, ICMAT2015 & IUMRS-ICA2015, June 2015.
• Tso-Fu Mark Chang, Lin Wei-Hao, Hsu Yung-Jung, Chun-Yi Chen, Tatsuo Sato, Masato Sone. Effect of Pressure on Titanium Dioxide Electrodeposited Cathodically with Supercritical Carbon Dioxide, 17th Topical Meeting of the International Society of Electrochemistry, May 2015.
• Xun Luo, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Crystal growth of Co film fabricated by electrodeposition with supercritical carbon dioxide emulsion, 2015 MRS Spring Meeting, 2015 MRS Spring Meeting, Apr. 2015.
• Mitsuo Sano, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone, Yuma Tahara, Tomoko Hashimoto, Hiromichi Kurosu. Metallization on Textile by Pd Catalyzation and Ni Electroless Deposition, 2015 MRS Spring Meeting, 2015 MRS Spring Meeting, Apr. 2015.
• Wei-Hao Lin, Tso-Fu Mark Chang, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Electrochemical Cathodic Deposition of ZnO Mesocrystals for Efficient Photoelectrochemical Water Splitting, 2014 MRS Fall Meeting, Dec. 2014.
• Yoshiaki Kihara, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Mechanical property of Nickel Film Electrodeposited with Supercritical Carbon Dioxide Emulsion, TSCFA 2014, Oct. 2014.
• Mana Tanabe, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Morphology and Mechanical Properties of Sn Electrodeposited with Supercritical Carbon Dioxide Emulsion, TSCFA 2014, Oct. 2014.
• Bourin Tei, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Deformation Behavior of Al-Mg Alloy Bi-Crystal Micro-Pillar Evaluated by Micro-Compression Test, The 40th International Conference on Micro and Nano Engineering, MNE2014, The 40th International Conference on Micro and Nano Engineering, MNE2014, The 40th International Conference on Micro and Nano Engineering, MNE2014, Sept. 2014.
• Yoshiaki Kihara, Takashi Nagoshi, Tso-Fu Mark Chang, Hideki Hosoda, Tatsuo Sato, Masato Sone. Tensile Behavior of Micro-Sized Specimen Fabricated from Nanocrystalline Nickel Film, The 40th International Conference on Micro and Nano Engineering, MNE2014, The 40th International Conference on Micro and Nano Engineering, MNE2014, The 40th International Conference on Micro and Nano Engineering, MNE2014, Sept. 2014.
• Mana Tanabe, Tso-Fu Mark Chang, Takashi Nagoshi, Hideki Hosoda, Tatsuo Sato, Masato Sone. Mechanical Properties of Sn Electrodeposited in Supercritical CO2 Emulsion Using Micro-Compression Test, The 40th International Conference on Micro and Nano Engineering, MNE2014, The 40th International Conference on Micro and Nano Engineering, MNE2014, Sept. 2014.
• Tso-Fu Mark Chang, Wei-Hao Lin, Takashi Nagoshi, Nao Shinoda, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Metals and Metal Oxides Electrodeposited with Supercritical Carbon Dioxide Emulsified Electrolyte, 65th Annual Meeting of the International Society of Electrochemistry, Aug. 2014.
• Masato Sone, Tso-Fu Mark Chang, Tatsuo Sato. Novel Approach to Integrate Biocompatible MEMS by Electrodeposition Using Supercritical Carbon Dioxide (Invited Lecture), Integrative Biology-2014, International Conference on Integrative Biology Summit, Integrative Biology-2014, Aug. 2014.
• Masato Sone, Tetsuya Shimizu, Tso-Fu Mark Chang, Nao Shinoda, Takashi Nagoshi, Tatsuo Sato. Nanoscale Cu Wiring by Electrodeposition in Supercritical Carbon Dioxide Emulsified Electrolyte toward 3D Integrated Circuits (Invited Lecture), IUMRS-ICEM 2014, International Union of Materials Research Societies - International Conference on Electronic Materials, IUMRS-ICEM 2014, June 2014.
• Mana Tanabe, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Electrodeposition of Tin Using Supercritical Carbon Dioxide Emulsion, IUMRS-ICEM 2014, International Union of Materials Research Societies - International Conference on Electronic Materials, IUMRS-ICEM 2014, June 2014.
• Yoshiaki Kihara, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Micro-Tensile Test Using Micro-Sized Gripper and Specimen Fabricated by FIB, IUMRS-ICEM 2014,International Union of Materials Research Societies - International Conference on Electronic Materials 2014, IUMRS-ICEM 2014,International Union of Materials Research Societies - International Conference on Electronic Materials 2014, June 2014.
• Tso-Fu Mark Chang, Wei-Hao Lin, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Effects of Supercritical CO2 Emulsion on SnO2, TiO2, and ZnO Deposited Cathodically, IUMRS-ICEM 2014,International Union of Materials Research Societies - International Conference on Electronic Materials 2014, IUMRS-ICEM 2014,International Union of Materials Research Societies - International Conference on Electronic Materials 2014, June 2014.
• Tso-Fu Mark Chang, Wei-Hao Lin, Yung Jung Hsu, Tatsuo Sato, Masato Sone. Application of Supercritical CO2 Emulsified Electrolyte in Cathodic Deposition of Metal Oxides, 225th ECS Meeting, The Electrocehmical Society, May 2014.
• 里 達雄. アルミニウムダイカスト合金の熱処理と高強度・高延性化技術（in Japanese）, The 8th International Die Casting Seminar, Nov. 2013.
• Masato Sone, Tetsuya Shimizu, Tso-Fu Mark Chang, Yuma Ishimoto, Hikaru Kinashi, Takashi Nagoshi, Tatsuo Sato. Nanoscale Wiring By Cu Electrodeposition in Supercritical Carbon Dioxide (Invited Lecture), 224th ECS Meeting, ECS, Nov. 2013.
• Wei-Hao Lin, Tso-Fu Mark Chang, Yung-Jung Hsu, Chun-Yi Chen, Tatsuo Sato, Masato Sone. Cathodic Deposition of TiO2 and ZnO with Supercritical CO2 Emulsified Electrolyte, SuperGreen 2013,The 8th International Conference on Supercritical Fluids, SuperGreen 2013,The 8th International Conference on Supercritical Fluids, Oct. 2013.
• Rina Khanum, Tso-Fu Mark Chang, Takabumi Nagai, Tatsuo Sato, Masato Sone. Porous Nickel Films Plated in Supercritical Carbon Dioxide Emulsified Electrolyte Using a Series of Fluorinated Nonionic Surfactants, TACT2013, International Thin Films Conference, TACT2013, Oct. 2013.
• Tso-Fu Mark Chang, Takashi Nagoshi, Nao Shinoda, HIkaru Kinashi, Tatsuo Sato, Masato Sone. Application of Supercritical CO2 in Electroplating of Ni and Cu, SuperGreen 2013,The 8th International Conference on Supercritical Fluids, SuperGreen 2013,The 8th International Conference on Supercritical Fluids, Oct. 2013.
• Hikaru Kinashi, Tetsuya Shimizu, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Glow discharge optical emission spectroscopic study of Cu film fabricated by electrodepostion using supercritical CO2 emulsified electrolyte, TACT2013, International Thin Films Conference, TACT2013, Oct. 2013.
• Wei-Hao Lin, Mana Tanabe, Tso-Fu Mark Chang, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Preparation of ZnO Thin Films by Sc-CO2 Emulsion-Assisted Electrochemical Deposition, TACT2013, International Thin Films Conference, TACT2013, Oct. 2013.
• Yuma Ishimoto, Tetsuya Shimizu, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Cu Wiring by Electrodeposition in supercritical CO2 Emulsified Electrolyte using Continuous flow reaction system, TACT2013, International Thin Films Conference, TACT2013, Oct. 2013.
• Tso-Fu Mark Chang, Wei-Hao Lin, Yung-Jung Hsu, Tatsuo Sato, Masato Sone. Effects of Fluorinated Surfactant in Cathodic Deposition of TiO2 Thin Films with Supercritical CO2 Emulsified Electrolyte, TACT2013, International Thin Films Conference, TACT2013, Oct. 2013.
• Tatsuo Sato. Improved Mechanical Properties of Al-Mg-Si Alloys with Multi-step Aging and Microalloying Elements, IUMRS-ICAM2013, Sept. 2013.
• Hikaru Kinashi, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Mechanical Strength of Cu Electroplated in Supercritical CO2 Emulsion Using Micro-Compression Test, MNE2013, 39th International Conference on Micro and Nano Engineering, MNE2013, Sept. 2013.
• Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Fabrication of TiO2 Micro-structure by Cathodic Deposition, MNE2013, 39th International Conference on Micro and Nano Engineering, MNE2013, Sept. 2013.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Effect of Pressure on Mechanical Properties of Nickel Film Electrodeposited Using Supercritical CO2 Emulsion Evaluated by Micro-Compression Test, MNE2013, 39th International Conference on Micro and Nano Engineering, MNE2013, Sept. 2013.
• Tatsuo Sato. Development of Advanced Aluminum Alloys with Nano-Hetero Structures and Their Mechanical properties, The 8th pacific Rim International Congress on Advanced Materials and Processing, Aug. 2013.
• Yong-Chul Lee, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effects of Annealing Temperature on the Recrystallization Behavior and microstructure of Al-Mn Alloys with Different Second Particles, The 8th pacific Rim International Congress on Advanced Materials and Processing, Aug. 2013.
• Takashi Nagoshi, Masahide Mutoh, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Sample size effect of electrodeposited nanocrystalline nickel, Intenational Symposium on Strength of Fine Grained Materials - 60 years of Hall-Petch-, Program & Abstracts of Intenational Symposium on Strength of Fine Grained Materials - 60 years of Hall-Petch-, p. 14, June 2013.
• Wei-Hao Lin, Masato Sone, Tso-Fu Mark Chang, Tatsuo Sato, Yung-Jung Hsu. Preparation of Uniform TiO2 Thin Films by Supercritical Carbon Dioxide, 223rd ECS Meeting, May 2013.
• Takashi Nagoshi, Yuuki Karasawa, Akinobu Shibata, Tatsuo Sato, Masato Sone. Deformation Behavior of Fully Nano-Twinned BCT Material in a Micro-Compression Test, MRS - Fall Meeting 2012, MRS Proceeding, Dec. 2012.
• Hirohito Imamura, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Deformation behavior of electrodeposited Ni film by using micro-compression test, MRS - Fall Meeting 2012, MRS Proceeding, Dec. 2012.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Micro-compression test of nanocrystalline Nickel deposited by supercritical carbon dioxide emulsion, ICETI 2012, The 2nd International Conference on Engineering and Technological Innovation, pp. in press, Nov. 2012.
• Tso-Fu Mark Chang, Takashi Nagoshi, Chiemi Ishiyama, Tatsuo Sato, Masato Sone. Intact Ultrathin Ni Films Fabricated by Electroplating with Supercritical CO2 Emulsion, ICETI 2012, The 2nd International Conference on Engineering and Technological Innovation, pp. in press, Nov. 2012.
• Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Evaluation of Mechanical properties of electroplated Nickel, 38th International Conference on Micro and Nano Engineering, (MNE2012), 38th International Conference on Micro and Nano Engineering, (MNE2012), pp. P214-366, Sept. 2012.
• Hirohito Imamura, Takashi Nagoshi, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Multidirectional strength of micro-sized cantilever composed of columnar grains in electrodeposited Ni, 38th International Conference on Micro and Nano Engineering, (MNE2012), pp. P215-372, Sept. 2012.
• Tetsuya Shimizu, Yuma Ishimoto, Tso-Fu Mark Chang, Tatsuo Sato, Masato Sone. Continuous flow reaction system for nanoscale wiring by Cu electroplating using suspension of supercritical CO2 in electrolyte with Cu particles, 38th International Conference on Micro and Nano Engineering, (MNE2012), 38th International Conference on Micro and Nano Engineering, (MNE2012), pp. P086-027, Sept. 2012.
• Tso-Fu Mark Chang, Chiemi Ishiyama, Tatsuo Sato, Masato Sone. Quantitative Study on Removal of SU-8 Photoresist Patterns by Supercritical CO2 Emulsion, 38th International Conference on Micro and Nano Engineering, (MNE2012), 38th International Conference on Micro and Nano Engineering, (MNE2012), pp. P061-100, Sept. 2012.
• Z Zhang, Equo Kobayashi, Hiroyasu Tezuka, Tatsuo Sato. Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys, 13th International Conference on Aluminium Alloys, June 2012.
• Tatsuo Sato, Tomo Ogura. Nanocluster Formation Behavior in Al-Zn-Mg Alloys with Microalloying Elements and Improved Mechanical Properties, 13th International Conference on Aluminium Alloys, June 2012.
• J Kim, CD Marioara, R Holmestad, Equo Kobayashi, Tatsuo Sato. Effects of Microalloying Elements (Cu, Ag) on Nanocluster Formation and Age-hardening Behavior in Al-Mg-Si, 13th International Conference on Aluminium Alloys, June 2012.
• C Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato. Evolution of Fragmented Fe-intermetallic Compounds in the Semi-solid State of Al-Mg-Si-Fe Alloys by Deformation Semi-Solid Forming Process, 13th International Conference on Aluminium Alloys, June 2012.
• Yasuo Takaki, Tetsuya Masuda, Equo Kobayashi, Tatsuo Sato. Effects of Pre-Aging Condition on Multi-Step Aging Behavior in Al-Mg-Si Alloys, 13th International Conference on Aluminium Alloys, June 2012.
• C Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato, S Takamori, Y Ohsawa. Refinement of Fe-intermetallic Compounds by Caliber Rolling Process of Al-Mg-Si-Fe Alloys, The Minerals, Metals & Materials Society 141st Annual Meeting & Exhibition, Mar. 2012.
• 里 達雄. アルミニウム合金ダイカストの最新技術動向とミクロ組織の微細化制御 (in Japanese), The 6th International Eco-Die Casting Symposium, Nov. 2011.
• C Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato. Evolution of Fe-intermetallic Compounds in the Semi-solid State of Al-Mg-Si-Fe alloys by the Deformation Semi-Solid Forming process, Thailand-Japan International Academic Conference, Nov. 2011.
• J Kim, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato. Effects of Cu and Ag Addition on Nanocluster Formation and Age-hardening Behavior in Al-Mg-Si Alloys, European Conference of Aluminum Alloy, Oct. 2011.
• Tatsuo Sato. Recent Research on Microstructure Refinement of Aluminum Cast Alloys, The KFS Annual Summer Meeting, July 2011.
• C. Phongphisutthinan, H. Tezuka, T. Sato. Effects of Fe and Mn Additions on Semi-solid Microstructures of Al-Mg-Si Based Alloys in Deformation-Semi-Solid- Forming Process, The 12th International Conference on Aluminum Alloys, Proceedings of the 12th International Conference on Aluminum Alloys, pp. 2114-2119, Sept. 2010.
• J. Nakamura, K. Matsuda, Tatsuo Sato, C.D. Marioara, S.J. Andersen, R. Holmestad, S. Ikeno. The Effect of Ag Addition on Transition of Crystal Structure for β’-phase in Al-Mg-Si Alloy, Proc. of the 12th International Conference on Aluminium Alloys, pp. 1057-1060, Sept. 2010.
• J.H. Kim, Equo Kobayashi, Tatsuo Sato. Effects of Cu Addition on Behavior of Nanoclusters during Multi-step Aging in Al-Mg-Si Alloys, Proc. of the 12th International Conference on Aluminium Alloys, pp. 1051-1056, Sept. 2010.
• H.B. Lee, Hiroyasu Tezuka, Equo Kobayashi, Tatsuo Sato, K.D. Woo. Fabrication of (Al2O3-IMC)p/Al Composite Materials by In-situ Reaction Using MA Processed Al/MO Powders, Proc. of the 12th International Conference on Aluminium Alloys, Proceedings of the 12th International Conference on Aluminum Alloys, pp. 829-834, Sept. 2010.
• K. Eidhed, H. Tezuka, T. Sato. Microstructure and Mechanical Properties of Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process, Proc. of the 12th International Conference on Aluminium Alloys, Proceedings of the 12th International Conference on Aluminum Alloys, pp. 1874-1879, Sept. 2010.
• Tatsuo Sato. Latest Trend of Casting Technologies of Aluminum Alloys inAutomobile Industry, The KFS Annual Spring Meeting, Apr. 2010.

国内会議発表 (査読有り)

• 柳田 佐理, 荒木 章好, TSO-FU MARK CHANG, 陳 君怡, 名越 貴志, 小林 郁夫, 細田 秀樹, 里 達雄, 曽根 正人. 微小圧縮試験及び微小引張試験によるMEMS用Cu-Ni-Si合金の機械的特性評価, 第63回応用物理学会春季学術講演会, 第63回応用物理学会春季学術講演会, Mar. 2016.
• 鄭 伯倫, 名越 貴志, TSO-FU MARK CHANG, 細田 秀樹, 里 達雄, 曽根 正人. マイクロサイズ圧縮試験を用いたAl合金の変形挙動における結晶粒界の研究, 第63回応用物理学会春季学術講演会, 第63回応用物理学会春季学術講演会, Mar. 2016.

国際会議発表 (査読なし・不明)

• Shoishi.Hirosawa, Junji.Kamibeppu, Mohamad.qbal, Hideki.Hosoda, Tatsuo.Sato. Effect of Ultasound Treatment on Age-Hardening Response in an Al-Mg-Si Alloy, 12th International Conference on Aluminium Alloys, Proceedings of 12th International Conference on Aluminium Alloys, the Japan Institue of Light Metals, pp. 1938-1943, Sept. 2010.
• W.Eidhed, C.Limmaneervichitr H.Tezuka, T.Sato. The Development of New Al-Mg-Si Alloys for Thixoforing, Materials Science Forum, Vol. 519-521, pp. 377-382, 2006.
• S. Hirosawa, T. Omura, Y. Suzuki, T. Sato. Improvement of bake-hardening response of Al-Mg-Cu alloys by means of nanocluster assist processing (NCAP) technique, Materials Science Forum, Vol. 519-521, pp. 215-220, 2006.
• A. Serizawa, S. Hirosawa, T. Sato. 3DAP characterization and thermal stability of nano-scale clusters in Al-Mg-Si Alloys, Materials Science Forum, Vol. 519-521, pp. 245-250, 2006.
• Y. Komiya, S. Hirosawa, T. Sato. 3DAP Analysis and Computer Simulation of Nanocluster Formation in the Initial Aging Stage of Al-Zn Alloys, Materials Science Forum, Vol. 519-521, pp. 437-442, 2006.
• T. Ogura, S. Hirosawa, A. Cerezo, T. Sato. Quantitative Correlation between Strength, Ductility and Precipitate Microstructures with PFZ in Al-Zn-Mg(-Ag, Cu) Alloys, Materials Science Forum, Vol. 519-521, pp. 431-436, 2006.
• Y. Suzuki, T. Omura, S.Hirosawa, T. Sato. Formability and Bake-hardenability of Al-Mg-Cu alloy sheets by asymmetric warm rolling, Materials Science Forum, Vol. 519-521, pp. 1505-1510, 2005.

国内会議発表 (査読なし・不明)

• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong Long, 高橋恒夫. 急冷凝固したAl-Cu合金の組織と相分解, 軽金属, Vol. 35, No. 5, pp. 275-281, May 1985.

その他の論文・著書など

• 里達雄. 鉄を活用した新規ナノヘテロ構造アルミニウム合金の創製と３D構造解析, 科学技術振興機構(JST) 事後報告書（平成25年度）, Mar. 2014.
• 里達雄. 鉄を活用した新規ナノヘテロ構造アルミニウム合金の創製と３D構造解析, 科学技術振興機構(JST) 事後報告書（平成24年度）, Mar. 2013.
• 寺田芳弘, 伊藤大吾, 里 達雄. Mg-Al-Caダイカスト合金におけるクリープ中の転位組織解析, 耐熱金属材料123委員会研究報告, Vol. 50, No. 2, pp. 229-235, July 2009.
• 大村知也, 廣澤渉一, 里　達雄, 鈴木義和. Al-Mg-Cu(-Ag)合金における析出相分解過程, まてりあ, Vol. 第45, No. 12, pp. 861, Dec. 2006.
• 廣澤渉一, 里　達雄, G.J.Shiflet, 松田健二. メルトスピニング法によって作製したAl-Ni-Gd系金属ガラスのナノ組織観察, まてりあ, Vol. 第45, No. 12, pp. 860, Dec. 2006.
• 廣澤渉一, 中村文滋, 里　達雄, 星野敏春. アルミニウム合金中の原子間，原子ー空孔間相互作用エネルギーの第一原理計算とマイクロアロイング元素の挙動予測, 軽金属, Vol. 第56, No. 11, pp. 621-628, Nov. 2006.
• 里　達雄. ナノクラスタ制御によるアルミニウム合金の高強度・高延性化, 軽金属, Vol. 第56, No. 11, pp. 592-601, Nov. 2006.
• 里　達雄. 合金クラスタと材料開発, 学術月報, Vol. 58, No. 8, pp. 624-632, 2005.
• 寺田 芳弘 里 達雄. AM50系マグネシウムダイカスト合金におけるクリープ強化機構, 耐熱金属材料123委員会研究報告, Vol. 45, No. 3, pp. 227-233, 2004.
• 里　達雄. 微細粒軽量金属の研究動向 -材料特性の視点から-, まてりあ, Vol. 43, No. 5, pp. 400-404, 2004.
• 里　達雄　大江　力. Al-Si-Ge-Cu合金の微細複合析出組織, まてりあ, Vol. 42, No. 12, pp. 854, Dec. 2003.
• 里　達雄, 松田健二. Al-Mg-Si系合金の開発・研究の変遷, 軽金属, Vol. 53, No. 11, pp. 449-453, Nov. 2003.
• K.Matsuda S.Ikeno, T.Sato. HRTEM Study of Nano-Precipitation Phases in 6000 Series Aluminum Alloys, Science,Technology and Education of Microscopy:an Overview, pp. 152-162, 2003.
• 中村　文滋　里　達雄. (Al,Cr)3Ti金属間化合物におけるAl2Ti析出相とLl2構造相の界面構造, まてりあ, Vol. 42, No. 12, pp. 875, 2003.
• 里 達雄. ナノクラスタ形成と二段時効現象, 金属, Vol. 73, No. 3, pp. 10-14, 2003.
• 廣澤渉一, 里　達雄. マイクロアロイングによるアルミニウム合金の微細組織制御技術ーモンテカルロ計算機シミュレーションによる理論予測の可能性と問題点, 金属, Vol. 73, No. 3, pp. 191-195, 2003.

特許など

• 水流徹, 丸山俊夫, 里達雄, 竹山雅夫, 吉田　昌浩, 藤田　栄, 鈴木　幸子, 安藤　聡, 中丸　裕樹. Al系めっき鋼材及びその製造法. 特許. 登録. 国立大学法人東京工業大学, JFEスチール株式会社. 2011/12/12. 特願2011-271533. 2013/06/20. 特開2013-122079. 特許第5430022号. 2013/12/13 2013.
• 水流徹, 丸山俊夫, 里達雄, 竹山雅夫, 中丸　裕樹, 藤田　栄, 水野　大輔. 犠牲防食被膜、水素非侵入防食被膜、鋼材、および鋼材の製造方法. 特許. 公開. 国立大学法人東京工業大学, JFEスチール株式会社. 2009/08/31. 特願2009-201118. 2010/08/05. 特開2010-168645. 2010.
• 水流徹, 丸山俊夫, 里達雄, 竹山雅夫, 中丸　裕樹, 藤田　栄　, 水野　大輔　. 鋼材、および鋼材の製造方法. 特許. 登録. 国立大学法人東京工業大学, JFEスチール株式会社. 2009/08/31. 特願2009-201118. 2010/08/05. 特開2010-168645. 特許第5767766号. 2015/06/26 2015.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]