論文

• Masayuki SHIMOJO. Electron beam-induced deposition using iron carbonyl and the effects of heat treatment on nanostructure, Appl. Phys. A, Vol. 79, pp. 1869, 2004.
• Masayuki SHIMOJO. Application of transmission electron microscopes to nanometre-sized fabrication by means of electron beam-induced deposition, J. Microscopy, Vol. 214, pp. 76, 2004.
• Masayuki SHIMOJO. Electron induced nanodeposition of tungsten using field emission scanning and transmission electron microscopes, J. Vac. Sci. Technol. B, Vol. 22, No. 2, pp. 742, 2004.
• MARIKO KOBAYASHI, YUKI KATORI, MASATOSHI YAMAGUCHI, MASAYUKI SHIMOJO, KOTARO KAJIKAWA. Broadband light absorber of gold-coated moth-eye film, Optical Materials Express, Vol. 9, Page 3744-3752, Aug. 2019.
• MARIKO KOBAYASHI, TAKAYA FURUSAWA, TAIKI CHIKUTA, MASAYUKI SHIMOJO, KOTARO KAJIKAWA. Broadband light absorber property of metal-coated pillars on cicada wings, Optical Materials Express, Vol. 9, Page 2761-2768, June 2019.
• Yuusuke Ebihara, Yuta Sugimachi, Takahiro Noriki, Masayuki Shimojo, Kotaro Kajikawa. Biometamaterial: dark ultrathin gold film fabricated on taro leaf, Optical Materials Express, Vol. 6, pp. 1429-1435, Apr. 2016.
• Yaado Yonenaga, Masayuki Shimojo, Atsushi Kubono, Kotaro Kajikawa. Random Laser of dye-injected holey photonic-crystal fiber, Physical Review A, Vol. 92, pp. 013824, 2016.
• Yuusuke Ebihara, Ryoichi Ota, Takahiro Noriki, Masayuki Shimojo, Kotaro Kajikawa. Biometamaterials: Black Ultrathin Gold Film Fabricated on Lotus Leaf, Scientific Reports, Vol. 5, 15992, Nov. 2015.  公式リンク  
  
• Takahiro Noriki, Shogo Abe, Kotaro Kajikawa, Masayuki Shimojo. Patterening technique for gold nanoparticles on substrates using a focused ion beam, Beilstein J. Nanotechnol., Vol. 6, pp. 1010-1015, Apr. 2015.
• Ryushi Fujimura, Ruzhi Zhang, Yoshitaka Kitamoto, Masayuki Shimojo, Kotaro Kajikawa. Modeling of semi-shell nanostructures formed by metal deposition on dielectric nanospheres and numerical evaluation of plasmonic properties, Japanese Journal of Applied Physics, Vol. 53, Feb. 2014.
• Oki Kuraishi, Daisuke Tanaka, Masayuki Shimojo, Kotaro Kajikawa. Optical and Electrical Kerr Effects in Polydiacetylene Nanoparticle Submonolayer Probed by Surface Plasmon Resonance Spectroscopy, Journal of Physics D: Applied Physics, 45, 235105, May 2012.
• D. Tanaka, H. Karube, M. Shimojo, K. Kajikawa. Micropatterning of polydiacetylene Nanoparticle Monolayer Based on Ultraviolet or Electron Beam Polymerization, Appl. Phys. Exp., Vol. 4, pp. 121604, Dec. 2011.
• T. Yamaguchi, H. Okawa, K. Hashimoto, M. Shimojo, K. Kajikawa. Phase of the electric field lacalized at surface-immobilized gold nanospheres determined by second-harmonic interferometry, Phys. Rev. B, Vol. 83, No. 8, pp. 085425, Feb. 2011.
• Y. Uchiho, M. Shimojo, K. Kajikawa. Electro-optic effect and optical rectification in gold nanoparticles immobilized above a gold surface, J. Phys. D: Applied Physics, Vol. 43, pp. 495101, Nov. 2010.
• Gaurav Gupta, D. Tanaka, Y. Ito, D. Shibata, M. Shimojo, K. Fukuya, K. Mitsui, K. Kajikawa. Absorption spectroscopy of gold nanoisland films: optical and structural characterization, Nanotechnology, Vol. 20, pp. 25703, Jan. 2009.
• G. P. Zhang, KAZUKI TAKASHIMA, Masayuki SHIMOJO, Y. Higo. Fatigue Behavior of Microsized Austenitic Stainless Steel Specimens, Mat. Lett., Vol. 57, No. 9-10, pp. 1555-1560, June 2003.
• M.Shimojo, T.Inamura, T.H.Myeong, K.Takashima, Y.Higo. Formation of Nano-Sized Martensite Particles in Stainless Steels, Metall. Mater. Trans. A, Vol. 32A, pp. 261-265, 2001.
• T.Inamura, S.Nagano, M.Shimojo, K.Takashima, Y.Higo. Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique, J.Acoustic Emission, Vol. 19, pp. 85-90, 2001.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo. Deformation behavior of a fine grained 304 stainless steel using micro-sized specimens, Advances in Materials Engineering and Technology, Vol. 1, pp. 298-303, 2001.
• R.Tarumi, A.Ogura, M.Shimojo, K.Takashima, Y.Higo. Crystallization in an amorphous metal during shear deformation -A molecular dynamics study-, Advances in Materials Engineering and Technology, Vol. 1, pp. 71-76, 2001.
• M.Otsubo, M.Shimojo, Y.Higo. Preparation of titanium-inert gas alloys by cyclic plastic deformation, Advances in Materials Engineering and Technology, Vol. 2, pp. 506-511, 2001.
• T.Inamura, M.Shimojo, K.Takashima, Y.Higo. Formation of nano-sized martensite particles and its application to fatigue strengthening in an austenitic stainless steel, Proc. 4th Pacific Rim Int. Conf. on Adv. Mater. Processing, pp. 155-158, 2001.
• Y.Mizutani, M.Shimojo, K.Takashima, Y.Higo . Size effect of corrosion properties in micro-sized 304 austenitic stainless steel specimens , Advances in Fracture Research (Proc. 10th Int. Conf. Frac. (ICF10)),(CD-ROM), pp. 0186, 2001.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo . Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains , Advances in Fracture Research (Proc. 10th Int. Conf. Frac. (ICF10)), (CD-ROM), pp. 0644, 2001.
• R.Tarumi, M.Shimojo, K.Takashima, Y.Higo . Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy , Advances in Fracture Research (Proc. 10th Int. Conf. Frac. (ICF10)),(CD-ROM) , pp. 0184, 2001.
• T.Inamura, M.Shimojo, K.Takashima, Y.Higo. Fatigue life extension of austenitic stainless steel using nano-sized martensites formed at intersections of dislocations, Advances in Fracture Research (Proc. 10th Int. Conf. Frac. (ICF10)),(CD-ROM), pp. 0187, 2001.
• M.Shimojo, R.Kusama, M.Otsubo, Y.Higo. Effects of noble gas environments on fatigue crack growth in titanium alloys, Advances in Fracture Research (Proc. 10th Int. Conf. Frac. (ICF10)), (CD-ROM), pp. 0513, 2001.
• K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fatigue crack growth of a Ni-P amorphous alloy thin film, Mechanical Properties of Structural Films, ASTM STP, Vol. 1413, pp. 52-61, 2001.
• K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fracture behavior of micro-sized specimens with fatigue pre-crack prepared from a Ni-P amorphous alloy thin film, Mechanical Properties of Structural Films, ASTM STP, Vol. 1413, pp. 72-81, 2001.
• C.Ishiyama, T.Asai, M.Kobayashi, M.Shimojo, Y.Higo. Fatigue crack propagation mechanisms in poly (methyl methacrylate) by in situ observation with a scanning laser microscope, J. Polym. Sci. Pt. B, Vol. 39, No. 24, pp. 3103-3113, 2001.
• A. Ogura, R.Tarumi, M. Shimojo, K.Takashima, Y.Higo. Control of nano-crystalline orientation using the application of a stress field in an amorphous alloy, Appl. Phys. Lett., Vol. 79, No. 7, pp. 1042-1044, 2001.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, M.V.Swain. New equipment for evaluating performance of microelements on MEMS, Proc. 3rd Int. Conf. and Poster Exhibition Micro Materials (MicroMat 2000), pp. 997-1000, 2000.
• 前川智, 高島和希, 下条雅幸, 肥後矢吉, M.V.Swain. ミクロンサイズのアモルファス合金試験片における疲労き裂伝播挙動, 日本金属学会講演概要, Vol. 126, pp. 293, 2000.
• 市川祐介, 前川智, 高島和希, 下条雅幸, 肥後矢吉. ミクロンサイズの超微小試験片における破壊靭性評価, 日本金属学会講演概要, Vol. 126, pp. 294, 2000.
• G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo. Deformation Behavior of Micro-Sized Austenitic Stainless Steel Specimens, 第１回マイクロマテリアルシンポジウム講演論文集, pp. 52-53, 2000.
• 小倉暁生, 市川祐介, 下条雅幸, 高島和希, 肥後矢吉. Ni-P系アモルファス合金薄膜の破壊挙動, 第１回マイクロマテリアルシンポジウム講演論文集, pp. 54-55, 2000.
• 垂水竜一, 小倉暁生, 下条雅幸, 高島和希, 肥後矢吉. アモルファス金属の塑性変形に伴う結晶化過程の分子動力学シミュレーション, 日本機械学会2000年度年次大会講演論文集, Vol. 2, pp. 31-32, 2000.
• 下条雅幸, 大坪誠, 肥後矢吉. 繰返し塑性変形を利用したチタン－希ガス合金作製法の開発, 日本金属学会講演概要, Vol. 127, pp. 368, 2000.
• 大坪誠, 下条雅幸, 肥後矢吉. 繰返し塑性変形を利用して作製したチタン－希ガス合金の超伝導特性, 日本金属学会講演概要, Vol. 127, pp. 368, 2000.
• 矢野正勝, 大坪誠, 下条雅幸, 肥後矢吉. Ti-希ガス合金超伝導遷移温度に及ぼす希ガス種の影響, 日本金属学会講演概要, Vol. 127, pp. 369, 2000.
• 張廣平, 高島和希, 下条雅幸, 肥後矢吉. Deformation behavior of a fine-grained austenitic stainless steel using micro-cantilever beam bending test, 日本金属学会講演概要, Vol. 127, pp. 227, 2000.
• 佐藤恵, 小倉暁生, 垂水竜一, 下条雅幸, 高島和希, 肥後矢吉. アモルファス金属の塑性変形に伴う結晶化と熱的安定性の関係, 日本金属学会講演概要, Vol. 127, pp. 187, 2000.
• 垂水竜一, 下条雅幸, 高島和希, 肥後矢吉. 分子動力学法によるNi基非晶質金属の塑性変形に伴う結晶化過程の解析, 日本金属学会講演概要, Vol. 127, pp. 190, 2000.
• 森田敦, 市川祐介, 下条雅幸, 高島和希, 肥後矢吉, 杉浦眞佐. ミクロンサイズ試験片に対する単軸引張試験装置の開発, 日本金属学会講演概要, Vol. 127, pp. 227, 2000.
• Y.Higo, K.Takashima, M.Shimojo, C.Ishiyama. Fracture and fatigue properties of micro-sized specimens for bio-medical applications, International Workshop on Bio-integrated Materials & Tissue Engineering, pp. 106, 2000.
• A.Ogura, Y.Ichikawa, M.Shimojo, K.Takashima, Y.Higo, M.V.Swain. Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens, Proc. 3rd Int. Conf. and Poster Exhibition Micro Materials (MicroMat 2000), pp. 574-577, 2000.
• K.Takashima, S.Maekawa, Y.Ichikawa, M.Shimojo, Y.Higo, S.Sugiura, M.V.Swain. Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens, Proc. 3rd Int. Conf. and Poster Exhibition Micro Materials (MicroMat 2000), pp. 526-529, 2000.
• T.Inamura, S.Nagano, M.Shimojo, K.Takashima, Y.Higo. Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique, Progress in Acoustic Emission X (Proc.15th Int. AE Sympo.), pp. 299-304, 2000.
• M.Shimojo, M.Otsubo, Y.Higo. Preparation of a titanium-inert gas alloy and its superconductivity, Abstracts of 13th Int. Symp. on Superconductivity (ISS2000), pp. 99, 2000.
• M.Otsubo, M.Yano, M.Shimojo, Y.Higo. Effects of inert gas species on superconductig properties of titanium-inert gas alloys, Abstracts of 13th Int. Symp. on Superconductivity (ISS2000), pp. 100, 2000.
• M.Otsubo, M.Shimojo, Y.Higo. Preparation of titanium-inert gas alloys by cyclic plastic deformation, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 88, 2000.
• R.Tarumi, A.Ogura, M.Shimojo, K.Takashima, Y.Higo. Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 10, 2000.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo. Deformation behavior of a fine grained 304 stainless steel using micro-sized specimens, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 50, 2000.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, B.Pfister, M.V.Swain. Fatigue testing machine of micro-sized specimens for MEMS applications, Mat. Res. Soc. Symp. Proc., Vol. 605, pp. 241-246, 2000.
• S.Maekawa, K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fatigue properties for micro-sized Ni-P amorphous alloy specimens, Mat. Res. Soc. Symp. Proc., Vol. 605, pp. 273-278, 2000.
• Y.Ichikawa, S.Maekawa, K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fracture behavior of micro-sized Ni-P amorphous alloy specimens, Mat. Res. Soc. Symp. Proc, Vol. 605, pp. 247-252, 2000.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, M.V.Swain. Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P amorphous alloy thin film, Structural Integrity and Fracture Symposium (SIF2000), pp. 243-246, 2000.
• R.Tarumi, A.Ogura, M.Shimojo, K.Takashima, Y.Higo. Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation, Jpn. J. Appl. Phys., Vol. 39, No. 6B, pp. L611-L613, 2000.
• Y.Bokoi, C.Ishiyama, M.Shimojo, Y.Shiraishi, Y.Higo. Effects of sorbed water on crack propagation in poly (methyl methacrylate) under static tensile stress, J. Mater. Sci., Vol. 35, No. 19, pp. 5001-5011, 2000.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo. Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains, MRS 2000 fall meeting Abst., pp. 574, 2000.
• K.Takashima, A.Ogura, Y.Ichikawa, M.Shimojo, Y.Higo. Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films, MRS 2000 fall meeting Abst., pp. 574, 2000.
• T.Inamura, M.Shimojo, K.Takashima, Y.Higo. Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel, MRS 2000 fall meeting Abst., pp. 44, 2000.
• R.Tarumi, A.Ogura, M.Shimojo, K.Takashima, Y.Higo. Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal, MRS 2000 fall meeting Abst., pp. 40, 2000.
• M.Sato, A.Ogura, R.Tarumi, M.Shimojo, K.Takashima, Y.Higo. Formation of nano-sized crystals during plastic deformation in amorphous alloys, MRS 2000 fall meeting Abst., pp. 40, 2000.
• K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fatigue crack growth of a Ni-P amorphous alloy thin film, Abstracts for Symp. on Mechanical Properties of Structural Films, pp. 12, 2000.
• Y.Uchida, M.Shimojo, Y.Higo. Relationship between fatigue striation height and stress ratio, Journal of Materials Science, Vol. 34, pp. 2411-2419, 1999.
• 垂水竜一, 小倉暁生, 下条雅幸, 高島和希, 肥後矢吉. アモルファス金属の繰返し荷重負荷に伴う微細構造変化の分子動力学計算, 日本金属学会講演概要　第125回, pp. 158, 1999.
• 大坪誠, 下条雅幸, 肥後矢吉. 繰返し塑性変形によるチタンへの希ガスの侵入, 日本金属学会講演概要　第125回, pp. 486, 1999.
• Masayuki SHIMOJO. Fatigue properties of micro-sized Ni-P amorphous alloy specimens, Materials Research Society 1999 Fall Meeting Abstracts, pp. 680, 1999.
• Masayuki SHIMOJO. Fatigue testing machine of micro-sized specimens for MEMS applications, Materials Research Society 1999 Fall Meeting Abstracts, pp. 680, 1999.
• Masayuki SHIMOJO. Fracture behavior of micro-sized Ni-P amourphous alloy specimens, Materials Research Society 1999 Fall Meeting Abstracts, pp. 682, 1999.
• Masayuki SHIMOJO. Fatigue tests of Ni-P amorphous alloy microcantilever beams, Jpn. J. Appl. Phys., Vol. 38, No. 12B, pp. 7194-7198, 1999.
• 下条雅幸. ミクロンサイズ試験片用疲労試験機の開発とアモルファス合金微小試験片の疲労試験 , 日本金属学会講演概要　第124回, pp. 92, 1999.
• 垂水竜一, 小倉暁生, 下条雅幸, 高島和希, 肥後矢吉. Ni-P系アモルファス合金の繰返し荷重負荷に伴う微細構造変化 , 日本金属学会講演概要　第124回, pp. 416, 1999.
• 下条雅幸. ミクロンサイズのアモルファス合金微小試験片に対する疲労試験 , 日本機械学会1999年度年次大会講演論文集, Vol. III, pp. 17, 1999.
• 下条雅幸. マイクロマシンを構成する超微小部品の力学的特性評価装置, 日本機械学会平成11年度材料力学部門講演会講演論文集, No. 99-16, pp. 63-64, 1999.
• 下条雅幸. ミクロンサイズのNi-Pアモルファス合金片持ち梁試験片の疲労特性評価, 日本機械学会平成11年度材料力学部門講演会講演論文集, No. 99-16, pp. 67-68, 1999.
• M.Shimojo, Y.Higo. Effects of inert gas on fatigue crack growth in titanium, Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 4, pp. 2311-2316, 1999.
• T.Inamura, R.Abe, T.H.Myeong, M.Shimojo, Y.Higo. Fatigue life extension by nano-sized martensite particles in steels, Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 1, pp. 633-638, 1999.
• Masayuki SHIMOJO. The mechanisms of striation formation in poly (methyl methacrylate) (PMMA), Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 3, pp. 1761-1766, 1999.
• Masayuki SHIMOJO. A new fatigue testing machine for micro-sized specimens , Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 3, pp. 1871-1876, 1999.
• T.Inamura, M.Shimojo, Y.Higo. Non-destructive inspection of fatigue damage by measuring internal friction, Proc. 2nd Japan-US symp. on advances in NDT, pp. 157-161, 1999.
• R.Tarumi, A.Ogura, M.Shimojo, K.Takashima, Y.Higo. Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission, Proc. 2nd Japan-US symp. on advances in NDT, pp. 74-78, 1999.
• Masayuki SHIMOJO. Fatigue tests of Ni-P amorphous alloy micro-cantilever beams, Proc. 1999 Int. Microprocesses and Nanotechnology Conf., pp. 132-133, 1999.
• Masayuki SHIMOJO. Effects of humidity on environmental stress crack propagation in polymethyl methacrilate (PMMA), Proc. 2nd ESIS TC4 Conf. Polymers and Composites, pp. 142, 1999.
• Masayuki SHIMOJO. A study of a fatigue striation formation mechanism by in-situ observation under a laser microscope during cyclic loading on PMMA, Proc. 2nd ESIS TC4 Conf. Polymers and Composites, pp. 144, 1999.
• 稲邑朋也, 下条雅幸, 高島和希, 肥後矢吉. オーステナイトステンレス鋼におけるナノサイズαマルテンサイトによる疲労強化, 日本金属学会講演概要　第125回, pp. 94, 1999.
• 下条雅幸. AE法による高分子材料の変形と破壊機構の解明, 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 45-48, 1999.
• 垂水竜一, 小倉暁生, 下条雅幸, 高島和希, 肥後矢吉. AE測定によるNi-P/Al-Mg積層材の損傷過程解析, 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 99-102, 1999.
• M.Shimojo, Y.Uchida, S.Turuoka, Y.Higo. Fatigue striation formation in an Fe-3%Si alloy -effects of crystallographic orientation and neibouring grains-, Fatigue and Fracture of Engineering Materials and Structures, Vol. 22, pp. 153-159, 1999.
• 稲邑朋也, 下条雅幸, 高島和希, 肥後矢吉. AEによるナノサイズマルテンサイト変態開始温度の決定, 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 103-106, 1999.
• 下条雅幸. ミクロンサイズのアモルファス合金微小試験片の破壊と疲労特性, 日本金属学会講演概要　第125回, pp. 96, 1999.
• M.Shimojo, P.Bowen. Effects of temperature, cyclic frequency and environment on fibre degradation and fatigue crack growth resistance in a fibre-reinforced titanium metal-matrix composite under displacement-range loading, Fatigue Fract. Eng. Mater. Struct. , Vol. 21, pp. 171-182, 1998.
• M.Shimojo, M.Chujo, Y.Higo, S.Nunomura. Mechanism of the two stage plastic deformation following an overload in fatigue crack growth , Int. J. Fatigue, Vol. 20, No. 5, pp. 365-371, 1998.
• 下条雅幸. アコースティックエミッション法によるエンジニアリング・プラスティックPEEKの変形過程の解析, 非破壊検査, Vol. 47, No. 12, pp. 903-909, 1998.
• 下条雅幸. マイクロサイズ試験片用超小型疲労試験機の開発 , 日本金属学会講演概要　第123回, pp. 206, 1998.
• 稲邑朋也, 明　台鎬, 下条雅幸, 肥後矢吉. ナノサイズ・マルテンサイト粒子分散による耐疲労強化 I. ナノサイズ・マルテンサイト形成 , 材料とプロセス , Vol. 11, No. 6, pp. 1276, 1998.
• 下条雅幸, 肥後矢吉, 明　台鎬. ナノサイズ・マルテンサイト粒子分散による耐疲労強化 II. 疲労軟化挙動の変化 , 材料とプロセス , Vol. 11, No. 6, pp. 1277, 1998.
• 三浦順二, 中谷征靖, 下条雅幸, 肥後矢吉. 繰り返し変形中の塑性変形領域への不活性ガスの侵入 , 日本金属学会講演概要　第122回, pp. 230, 1998.
• 明台鍋, 下条雅幸, 肥後矢吉. 微細なマルテンサイト粒子で転位を固着する耐疲労強化法における冷間加工の影響 , 材料とプロセス , Vol. 11, No. 3, pp. 486, 1998.
• Masayuki SHIMOJO. Effects of humidity on acoustic emission characteristics during environmental stress cracking in polymethyl methacrilate (PMMA) , Progress in Acoustic Emission IX (Proc.14th Int. AE Sympo.), Vol. 3, pp. 99-106, 1998.
• 下条雅幸. マイクロサイズ試験片用疲労試験装置の開発, 第42回日本学術会議材料研究連合講演会前刷集, pp. 269-270, 1998.
• 下条雅幸, 中谷征靖, 三浦順二, 肥後矢吉. 不活性ガス中での疲労き裂伝播速度および破面形態に及ぼすガス中の不純物の影響 , 日本金属学会講演概要　第123回, pp. 206, 1998.
• F.Brisset, M.Shimojo, P.Bowen. Effects of control mode in a cross-ply Ti-MMC at ambient and high temperature in air and in vacuum , Int. J. Fatigue, Vol. 20, No. 5, pp. 339-349, 1998.
• M.Shimojo, R.Iguchi, T.H.Myeong, Y.Higo. The entering behavior of environmental gases into the plastic zone around fatigue crack tips in titanium, Metallurgical and Materials Transactions A, Vol. 28A, pp. 1341-1346, 1997.
• T.H.Myeong, Y.Yamabayashi, M.Shimojo, Y.Higo. A New Life Extension Method for High Cycle Fatigue using Micro-Martensitic Transformation in an Austenitic Stainless Steel , Int. J. Fatigue, Vol. 19 Supp, No. 1, pp. S69-S73, 1997.
• M.Shimojo, Y.Uchida, Y.Higo. The effects of localised stress field near the crack tip on fatigue striation alignment in Fe-3%Si single crystals, Proc.9th Int. Conf. on Frac. (ICF9), Advances in Fracture Research, vol. 3, (1997), 1653-1660, Vol. 3, pp. 1653-1660, 1997.
• 中谷征靖, 下条雅幸, 肥後矢吉. 疲労き裂伝播における不活性ガスの影響, 日本金属学会講演概要　第121回, pp. 432, 1997.
• M.Shimojo, T.Nagatomo, Y.Higo, S.Nunomura. A new method of dynamic measurements of the plastic deformation occurring at a fatigue crack tip, Int. J. Fatigue, 19, 3, (1997), 237-241, Vol. 19, No. 3, pp. 237-241, 1997.
• Masayuki SHIMOJO. Effects of humidity on creep fracture and crazing behaviour of PMMA, Proc.9th Int. Conf. on Frac. (ICF9), Advances in Fracture Research, Vol. 2, pp. 1029-1035, 1997.
• Y.Bokoi, H.Abiko, M.Shimojo, C.Ishiyama, Y.Higo. Detection of local tensile and shear stress on a non-crystalline polymer using an acoustoelastic stress measurement technique, Proc. Ultrasonics World Congress (WCU97), pp. 332-333, 1997.

著書

• M.Shimojo, Y.Higo. Advances in Materials Research 3, Amorphous and Nanocrystalline Materials -Preparation, Properties and Applications-, Springer Verlag, Berlin, Germany, Springer Verlag, Berlin, Germany, pp. 186-204, 2001.
• 下条雅幸. 半導体・金属材料用語辞典, 工業調査会, 工業調査会, 1999.

国際会議発表 (査読有り)

• Yoko Yamabe-Mitarai, Raju Arockiakumar, Abdol Wadood, Wataru Tasaki, Masayuki Shimojo, Kondi Santharam Suresh, Tomonori Kitashima, Toru Hara, Madoka Takahashi, Satoshi Takahashi, Hideki Hosoda. High temperature shape memory alloys based on intermetallic compounds consisting of Ti and precious metals, International Conference on Martensitic Transformations 2014, ICOMAT2014, p. 15, July 2014.

国内会議発表 (査読なし・不明)

• 小林 万里子, 古澤 崇哉, 築田 大輝, 下条 雅幸, 梶川 浩太郎. 蝉の翅の表面を鋳型に用いた黒体メタマテリアル, 第６５回応用物理学会春季学術講演会, Mar. 2018.
• 田中大輔, 倉石央騎, 下条雅幸, 梶川浩太郎. PDAナノ結晶の光・電子線リソグラフィー, 第58回応用物理学関連連合講演会, Mar. 2011.
• 内保裕一, 下条雅幸, 梶川浩太郎. 金属メタ分子の2次の非線形光学効果, Mar. 2010.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 10, Jan. 2000.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal, MRS 2000 fall meeting Abst., pp. 40, Jan. 2000.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation, Jpn. J. Appl. Phys., Vol. 39, No. 6B, pp. L611-L613, Jan. 2000.

学位論文

• 電気化学的手法による疲労き裂伝播機構に関する研究,  本文,  博士(工学),  東京工業大学,  1992/03/26,   

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]