論文

• Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Kaoru Masuda, Yakichi Higo. Metallization on polymer via quantitatively controlled catalyzation in Sc-CO2 and electroless plating with Sc-CO2 emulsion for micro and nano device, Microelectronics Engineering, ELSEVIER, Vol. 86, pp. 1179-1182, May 2009.
• A.Shibata, Y. Imamura, M. Sone, C. Ishiyama, Y. Higo. Pd-Ni-P metallic glass film fabricated by electroless alloy plating, Thin Solid Films, ELSEVIER, Vol. 517, pp. 1935-1938, Mar. 2009.
• Yuichiro Ogawa, Akinobu Shibata, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Characterization of local deformation microstructure in ferrous lath martensite by using micro-sized specimen, Mater. Res. Soc. Symp. Proc., Vol. 1137E, p. EE05.32, Apr. 2009.
• Homuro Noda, Akinobu Shibata, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Characterization of texture and microstructure of Ni electrodeposited layer, Mater. Res. Soc. Symp. Proc., Vol. 1112, p. E05.01, Apr. 2009.
• Akinobu Shibata, Yoshihide Imamura, Masato Sone, Chiemi Ishiyama, Yakichi Higo. Microstructure of Pd-Ni-P metallic glass film fabricated by electroless alloy plating, Mater. Res. Soc. Symp. Proc., Vol. 1152E, p. TT03.02, Apr. 2009.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of aspect ratio of micro-sized photoresist patterns on bond strength between a Si substrate with AFM facture observation, Mater. Res. Soc. Symp. Proc., Vol. 1139, p. G03.09, Apr. 2009.
• Akinobu Shibata, Takashi Nagoshi, Masato Sone, Yakichi Higo. Micromechanical characterization of deformation behavior in ferrous lath martensite, Journal of Alloys and Compounds, Elsevier, Vol. 577, No. S1, pp. 555-558, Oct. 2013.
• Junpei Matsuzaki, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Effects of Chemical Components on the Bending Properties of Micro-sized Cantilevers in three types of SU-8, Microelectronic Engineering, Vol. 110C, pp. 108-111, June 2013.
• Fumihiro Wakai, Hirotaka Fukutome, Norihiro Kobayashi, Tomoyuki Misaki, Yutaka Shinoda, Takashi Akatsu, Masato Sone, Yakichi Higo. Direct observation of sintering mechanics of a single grain boundary, Acta Materialia, Vol. 60, pp. 507-516, Feb. 2012.
• CHIEMI ISHIYAMA, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of Aspect Ratio of Photoresist Patterns on Adhesive Strength between Microsized SU-8 Columns and Silicon Substrate under Bend Loading Condition, Japanese Journal of Applied Physics,, Vol. 49, pp. 06GN14-1-06GN14-5, Oct. 2010.
• Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO. Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test, Materials Science and Engineering A, Elsevier, Vol. 527, pp. 7538-7544, Oct. 2010.
• Hiroki Uchiyama, Akinobu Shibata, Masato Sone, YAKICHI HIGO. Effects of CO2 on Ni-P Electroless Plating in an Emulsion of Supercritical CO2, Journal of The Electrochemical Society, The Electrochemical Society, Vol. 157, No. 10, pp. D550-D552, Sept. 2010.
• Tso-Fu Mark Chang, Masato Sone, Akinobu Shibata, CHIEMI ISHIYAMA, Yakichi Higo. Bright nickel film deposited by supercritical carbon dioxide emulsion using an additive-free Watt bath, Electrochimica Acta, ELSEVIER, Vol. 55, pp. 6469-6475, Aug. 2010.
• Akinobu Shibata, Homuro Noda, Masato Sone, YAKICHI HIGO. Microstructural development of an electrodeposited Ni layer formed from an additive-free Watts bath, Thin Solid Films, ELSEVIER, Vol. 518, pp. 121-126, June 2010.
• Akinobu Shibata, Yuichiro Ogawa, Masato Sone, Yakichi Higo. Direct Observation of the Change in Microstructure with Deformation in Ferrous Lath Martensite by Using Micro-Sized Specimen, Material Science Forum, vol. 638-642, pp. 3514-3519, Mar. 2010.
• Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Susumu Edo, Masatoshi Tokita, Junji Watanabe, Yakichi Higo. Impregnation of Ni-P Metal into Polymer Substrate via Catalyzation in Sc-CO2 and Electroless Plating in Sc-CO2 Emulsion, Surface & Coating Technology, ELSEVIER, Vol. 204, pp. 1785-1792, Feb. 2010.
• Akinobu Shibata, Masato Sone, Yakichi Higo. Characterization of deformation-induced structural change of Pd78Cu6Si16 metallic glass using a micro -sized cantilever-beam specimen, Scripta Materialia, ELSEVIER, Vol. 62, pp. 309-312, Jan. 2010.
• Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Kaoru Masuda, Yakichi Higo. Effects of Sc-CO2 Catalyzation in Metallization on Polymer by Electroless Plating, Surface & Coating Technology, ELSEVIER, Vol. 203, 1971-1978, Jan. 2009.
• Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Kaoru Masuda, Tatsuro Endo, Takeshi Hatsuzawa, Yakichi Higo. Metallization on Polymer by Catalyzation in Supercritical CO2 and Electroless Plating in Dense CO2 Emulsion, Surface & Coating Technology, ELSEVIER, Volume 202, 16, pp. 3921-3926, May 2008.
• B.H. Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Yakichi Higo. Interfacial stability between Ni-P film plated by supercritical electroless plating and the polymer substrate, Mater. Res. Soc. Symp. Proc., Vol. 1052, p. FF08.03, Apr. 2008.
• Takafumi Shimada, Akinobu Shibata, Masato Sone, Chiemi Ishiyama, Yakichi Higo. Effect of crystallographic structure of substrate on texture in electrodeposited Ni layers, Mater. Res. Soc. Symp. Proc., Vol. 1054E, p. FF05.20, Apr. 2008.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of supercritical carbon dioxide on adhesive strength between micro-sized photoresist patterns and Si substrates, Mater. Res. Soc. Symp. Proc., Vol. 1052, p. DD06.26, Apr. 2008.
• Yoshihide Imamura, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Yakichi Higo. Fabrication of PdxNiyP100-x-y metallic glass film by electroless alloy plating and its catalyst ability, Mater. Res. Soc. Symp. Proc, Vol. 1048E, p. Z08-09, Apr. 2008.
• Koji Sato, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Effects of P content on nanocrystalline morphology formed by FIB irradiation in Ni-P amorphous alloy, Material Transaction, Vol. 48, No. 07, pp. 1694-1697, June 2007.
• Mikito Kondo, Ryo Morihashi, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Evaluation of Micro-Sized BMG Tensile Specimen Fabricated by Electrolytic Polishing Technique, Material Transaction, Vol. 48, No. 7, pp. 1785-1788, June 2007.
• Md. Mizanur Rahman, Masato Sone, Hiroki Uchiyama, Makoto Sakurai, Seizo Miyata, Takabumi Nagai, Yakichi Higo, Hideo Kameyama. Novel porous film by electroplating with an emulsion of supercritical CO2, Surface & Coatings Technology, ELSEVIER, Vol. 201, No. 16-17, pp. 7513-7518, June 2007.
• Hiroki Uchiyama, Masato Sone, CHIEMI ISHIYAMA, Tatsuro Endo, TAKESHI HATSUZAWA, YAKICHI HIGO. Uniform Ni-P Film using an Electroless Plating Method with an Emulsion of Supercritical Carbon Dioxide, Journal of The Electrochemical Society, The Electrochemical Society, Vol. 154, No. 7, pp. E91-E94, June 2007.
• Y.-HLee, J.-S. Park, Y.Higo, D.Kwon. Nanomechanical properties of embedded dendrite phase and its influence on inelastic deformation of Zr55Al10Ni5Cu30 glassy alloy, Materials Science&Engineering, Vol. A449-A451, pp. 945-948, May 2007.
• Mikito Kondo, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Size Effects of the Micro-Sized Polycrystalline SUS304 Tensile Specimen Fabricated by Electrolytic Polishing Technique, Transactions of the Materials Research Society of Japan, Vol. 32, No. 4, pp. 1187-1190, Apr. 2007.
• Ryuichi Tarumi, Akira Shibata, Hirotsugu Ogi, Masahiko Hirao, Kazuki Takashima, Yakichi Higo. Elastic　anisotropy of an Fe79Si12B9 amorphous alloy thin film studied by ultrasound spectroscopy, Jouanal of Applied Physics, Vol. 電子版, Feb. 2007.
• YAKICHI HIGO, KAZUKI TAKASHIMA. Mechanical testing of micro-sized specimens., Netsu Shori, Vol. 44, No. (1), pp. 1-2, Feb. 2007.
• 近藤幹人, 森橋遼, 石山千恵美, 曽根正人, 肥後矢吉. 電解研磨による微小サイズ引張試験片作製法の開発, 日本金属学会, 日本金属学会誌, Vol. 71, No. (2), pp. 1-6, Jan. 2007.
• G.P.Zhang, KAZUKI TAKASHIMA, YAKICHI HIGO. Fatigue strength of small-scale type 304 stainless steel thin films, Mater. Sci. Eng., A,, Vol. A426(1-2), pp. 95-100, Jan. 2006.
• T. Shiota, Y. Higo. Mechanical Alloying of Titanium with Rare Gas (He, Ar and Xe), Abstracts for the 11th Int. Symp. On Metastable, Mechanically Alloyed and Nanocrystalline Materials, pp. 125, June 2005.
• Y.Kamibayashi, T.Kamikawa, KAZUKI TAKASHIMA, YAKICHI HIGO. Patterning of self-oriented nanocrystals in an amorphous alloy under focused ion beam irradiation, J.Meta.Nanocryst. Mater., Vol. 24-25, pp. 483-486, June 2005.
• T.P.Halford, KAZUKI TAKASHIMA, YAKICHI HIGO. Fracture tests of microsized TiAl specimens, Fatigue & Fracture of Engineering Materials & Structures, Vol. 28, No. (8), pp. 695-701, June 2005.
• G.P.Zhang, KAZUKI TAKASHIMA, YAKICHI HIGO. Size effects on deformation and fatigue behavior of a micron-sized stainless steel, Jinshu Xuebao, Vol. 41, No. (4), pp. 337-341, Jan. 2005.
• KAZUKI TAKASHIMA, Y.Higo. Fatigue and Fracture of a Ni-P Amorphous Alloy Thin Film on the Micrometer Scale, Fatigue and Fracture of Engineering Materials and Structures, Vol. 28, No. 7, pp. 703-710, Jan. 2005.
• Ishiyama Chiemi, Yamamoto Yoshito, Higo Yakichi. Effects of Himidity History of the Tensile Deformation Behaviour in Poly(Methyl Methacrylate) (PMMA) Films, Thim Films-Stresses and Mechanical Properties XI, Vol. 875, pp. 345-350, Jan. 2005.
• T.P.Halford, K.Takashima, Y.Higo. Fatigue Testing of microsized samples of γ-TiAl based material, Materials Research Society Symposium Proceedings, Vol. 842, 2005.
• T.P.Halford, D.Rudinal, K.Takashima, Y.Higo. The Effect of Sample Preparation upon the Fracture Toughness of Microsized TiAl, Key Engineering Materials, Vol. 297-300, pp. 2416-2422, 2005.
• S.Koyama, K.Takashima, Y.Higo. Toughness Measurement of a Micro-Sized Single Crystal Silicon, Key Engineering Materials, Vol. 397-300, pp. 292-298, 2005.
• 高島和希, T.P.Halford, Discar Rudinal, 肥後矢吉. マイクロサイズ試験片によるTiAl基金属化合物の破壊じん性試験, 材料, Vol. 54, No. 10, pp. 1036-1040, 2005.
• 小山聡, 高島和希, 肥後矢吉. 単結晶シリコンウェハーのミクロンサイズにおける破壊靱性評価, 電気学会論文誌Ｅ, Vol. 125, No. 7, pp. 302, 2005.
• T.P.Halford, K.Takashima, Y.Higo. The Mechanical Properties of Microscale MEMS Materials, Thin Solid Films, Vol. in publication, 2005.
• K.Takashima, D.Rudinal, T.P.Halford, Y.Higo, M.Takeyama. Micro-Fracture Toughness Testing of TiAl based Alloys with a Fully Lamellar Structure, Materials Research Society Symposium Proceedings, Vol. in publication, 2005.
• Y-H. Lee, KAZUKI TAKASHIMA, Y. Higo, D. Kwon. Prediction of Stress Directionality from Pile-up Morphology around Remnant Indentation, Scripta Mater., Vol. 51, No. 9, pp. 887-891, Jan. 2004.
• 松崎　純平, 石山　千恵美, 肥後　矢吉. MEMS用高分子材料SU-8の機械的性質における現像とハードニングの影響, 第53回高分子討論会予稿集, Vol. 53, No. 2, pp. 3Pd080, 2004.
• 石山　千恵美, 肥後　矢吉. ＰＭＭＡフィルムの引張特性に及ぼす環境湿度履歴の影響, 第53回高分子討論会予稿集, Vol. 53, No. 2, pp. 3Pd082, 2004.
• Timothy Paul Halford, Chiemi Ishiyama, Kazuki Takashima, Yakichi Higo. The Effect of Processing for MEMS upon the Strength of PMMA, 53rd SPSJ Symposium on Macromplecules, Vol. 53, No. 2, pp. 3Pc081, 2004.
• T. Kamikawa, R. Tarumi, K. Takashima, Y. Higo. Formation of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation, Trans. Mat. Res. Soc. Japan, Vol. 29, No. 7, pp. 3095-3097, 2004.
• K. Takashima, T. P. Halford, D. Rudinal, Y. Higo, P. Bowen. Fracture Behavior of Micro-Sized Specimens Prepared from a TiAl Thin Foil, MRS Symp. Proceedings, Vol. 795, pp. 153-158, 2004.
• 高島和希, 肥後矢吉. マイクロサイズ試験片を用いた材料試験, 熱処理, Vol. 44, No. 1, pp. 1-2, 2004.
• 高島和希, 肥後矢吉. マイクロサイズ試験片を用いた材料評価試験, 検査技術, Vol. 9, No. 9, pp. 1-5, 2004.
• 垂水竜一, 柴田　明, 荻　博次, 平尾雅彦, 高島和希, 肥後矢吉. 超音波共鳴法によるFe系アモルファス合金薄膜の弾性率評価, 第134回日本金属学会春期大会講演概要, pp. 361, 2004.
• T. P. Halford, D. Rudinal, K. Takashima, Y. Higo, P. Bowen. Fracture Toughness Properties of High Strength -TiAl on the Micro-Scale, 第134回日本金属学会春期大会講演概要, pp. 383, 2004.
• 久保田仁, 小山　聡, 高島和希, 肥後矢吉. アモルファス合金より作製した微小サイズ試験片の曲げ特性に及ぼすイオン注入の効果, 第134回日本金属学会春期大会講演概要, pp. 383, 2004.
• 小山　聡, 高島和希, 肥後矢吉. 単結晶シリコンより作製したミクロンサイズ試験片の破壊靭性評価, 第134回日本金属学会春期大会講演概要, pp. 479, 2004.
• H. Kubota, S. Koyama, K. Takashima, Y. Higo. Effect of Ion-Implantation on the Mechanical Properties of a Zr-Ni Amorphous Alloy, Abstracts for the 11th Int. Symp. On Metastable, Mechanically Alloyed and Nanocrystalline Materials, pp. 82, 2004.
• Y. Kamibayashi, T. Kamikawa, K. Takashima, Y. Higo. Pattrening of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused Ion Beam Irradiation, Abstracts for the 11th Int. Symp. On Metastable, Mechanically Alloyed and Nanocrystalline Materials, pp. 131, 2004.
• 柴田　明, 垂水竜一, 荻　博次, 平尾雅彦, 高島和希, 肥後矢吉. 電磁超音波共鳴法およびRUS/レーザー法によるアモルファス合金薄膜の弾性率評価, 第2回マイクロマテリアルシンポジウム講演論文集, pp. 46-49, 2004.
• 小山　聡, 高島和希, 肥後矢吉. ミクロンザイズ単結晶シリコンの破壊靭性評価, 第2回マイクロマテリアルシンポジウム講演論文集, pp. 61-64, 2004.
• 高島和希, D. Rudinal, T. P. Halford, 肥後矢吉. マイクロサイズ試験片によるTiAl基金属間化合物の破壊靱性試験, 第2回マイクロマテリアルシンポジウム講演論文集, pp. 65-68, 2004.
• Y. Kamibayashi, R. Tarumi, K. Takashima, Y. Higo. Patterning of Self-Oriented Nanocrystals in an Amorphous Alloy Under Focused Ion Beam, 第135回日本金属学会秋期大会講演概要, pp. 81, 2004.
• 高島和希, R. Rudinal, T. P. Halford, 肥後矢吉, 竹山雅夫. メラ構造を有するTiAl基金属間化合物のマイクロスケールにおける破壊試験, 第135回日本金属学会秋期大会講演概要, pp. 196, 2004.
• Y-H. Lee, K. Takashima, Y. Higo, D. Kwon. Assesment of Indentation Fracture Toughness Based on a Direct Measurement of Crack-Driving Residual Stress, Abstracts for Asian Pacific Conference for Fracture and Strength ’04, pp. 143, 2004.
• S. Koyama, K. Takashima, Y. Higo. Fracture Toughness Measurement of a Micro-Sized Single Crystal Silicon, Abstracts for Asian Pacific Conference for Fracture and Strength ’04, pp. 144, 2004.
• T. P. Halford, D. Rudinal, K. Takashima, Y. Higo. The Effect of Sample Preparation upon The Fracture Toughness of Microsized Tial, Abstracts for Asian Pacific Conference for Fracture and Strength ’04, pp. 196, 2004.
• K. Takashima, D. Rudinal, T. P. Halford, Y. Higo, M. Takeyama. Micro-Fracture Toughness Testing of TiAl Based Alloys with a Fully Lamellar Structure, Abstracts for 2004 MRS Fall Meeting, pp. 465, 2004.
• T. P. Halford, K. Takashima, Y. Higo. Fatigue Testing of Microsized Samples of g-TiAl Based Materials, Abstracts for 2004 MRS Fall Meeting, pp. 469, 2004.
• Y.Higo, R.Tarumi. Focused Ion Beam Irradiation Induced Formation of Oriented Nanocrystals-Its Characterization and Application, Proc. 8th Asia-Pacific Conference on Electron Microscopy, pp. 596-597, 2004.
• Ryuichi Tarumi, K.Takashima, Y.Higo. Formation of oriented nanocrystals in an amorphous alloy by focused-ion-beam irradiation, Applied Physics Letters, Vol. 81, No. (24), pp. 4610-4612, June 2003.
• G. P. Zhang, KAZUKI TAKASHIMA, Masayuki SHIMOJO, Y. Higo. Fatigue Behavior of Microsized Austenitic Stainless Steel Specimens, Mat. Lett., Vol. 57, No. 9-10, pp. 1555-1560, June 2003.
• R. Tarumi, KAZUKI TAKASHIMA, Y. Higo. Crystallographic Features of Oriented Nanocrystals Induced by Focused-Ion-Beam Irradiation for an Amorphous Alloy, J. Appl. Phys., Vol. 94, No. 9, pp. 6108-6115, June 2003.
• M. Hopcroft, T. Kramer, G. Kim, K. Takashima, Y. Higo, D. F. Moore, J. Brugger. Micromechanical Testing of SU-8 Cantilevers, Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003), pp. OS06W0411-6, 2003.
• K. Takashima, Y. Mine, S. Ando, H. Tonda, Y. Higo. Effect of Crystallographic Orientation on Fatigue Crack Propagation in an Fe-3%Si Single Crystal, Proceedings of 7th Workshop on the Ultra-Steel, pp. 402-403, 2003.
• T. Inamura. K. Takashima, Y. Higo. Crystallography of α'-Martensite Formed at Intersections of <112>{111}f Shears in an Austenitic Stainless Steel, Proceedings of 7th Workshop on the Ultra-Steel, pp. 390-391, 2003.
• K. Yamada, K. Takashima, Y. Higo. Preparation of Ultra-Fine Grained (γ+α’) structure in the Surface Layer of a Type-316 Stainless Steel Using Ultrasonic Shot Peening, Proceedings of 7th Workshop on the Ultra-Steel, pp. 324-325, 2003.
• K. Takashima, S. Koyama, K. Nakai, Y. Higo. Development of Fatigue Pre-Cracking Method into Micro-Sized Specimens for Measuring Fracture Toughness, MRS Symp. Proc., Vol. 741, pp. 35-40, 2003.
• K. Kamikawa, R. Tarumi, K. Takashima, Y. Higo. Formation of 3-Diemnsionally Oriented Nano-Sized Crystals in an Amorphous Alloy Under Ion Beam Irradiation, MRS Symp. Proc., Vol. 739, pp. 157-162, 2003.
• T. Tsuchiya, M. Hirata, N. Chiba, R. Udo, Y. Yoshitomi, T. Ando, K. Sato, K. Takashima, Y. Higo, Y. Saotome, H. Ogawa, K. Ozaki. Cross Comparison of Thin Film Tensile-Testing Methods Examined with Single-crystal Silicon, Polysilicon, Nickel, and Titanium Films, Proc. of 16th IEEE Int. Micro Electro Mechanical Systems Conf. (MEMS 2003), pp. 666-669, 2003.
• T. Inamura, K. Takashima, Y. Higo. Formation of Pitch-Related B.C.C Crystal at an Intersection of <112>{111} Shears in a F.C.C. Crystal 　　　　　　 , Trans. Mat. Res. Soc. Japan, Vol. 28, No. 3, pp. 759-762, 2003.
• R. Tarumi, T. Kamikawa, K. Takashima, Y. Higo. Formation of Oriented Nano-Sized Crystals in an Amorphous Alloy under Focused Ion Beam Irradiation, Trans. Mat. Res. Soc. Japan, Vol. 28, No. 3, pp. 751-754, 2003.
• T. Kamikawa, R. Tarumi, K. Takashima, Y. Higo. Orientation Control of Nanocrystals in an Amorphous Alloy by Ion Beam Irradiation, Trans. Mat. Res. Soc. Japan, Vol. 28, No. 3, pp. 747-750, 2003.
• 小山　聡, 高島　和希, 肥後　矢吉. マイクロサイズ試験片における破壊靱性試験, 日本金属学会秋季大会講演概要, Vol. 133, pp. 502, 2003.
• T. Inamura, K. Takashima, Y. Higo. Morphology and Crystallography of Nano-Sized α'-Martensite in an Austenitic Stainless Steel, J. Phys., IV France, Vol. 112, pp. 333-340, 2003.
• 肥後矢吉, 垂水竜一, 高島和希. Ni-Pアモルファス合金へのFIB照射によるNiナノ結晶相の方位配向制御, 日本金属学会2003年春期（第132回）大会講演概要, pp. 237, 2003.
• D. Rudinal, S. Koyama, K. Takashima, Y. Higo, T. P. Halford, P. Bowen. Fracture Tests for Micro-Sized TiAl Specimens Prepared from One Lamellar Colony, 日本金属学会2003年秋期（第133回）大会講演概要, pp. 620, 2003.
• T. Kamikawa, R. Tarumi, K. Takashima, Y. Higo. Formation of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation, IUMRS-ICAM2003 Abstracts 2, pp. 163, 2003.
• T. P. Halford, K. Takashima, Y. Higo, P. Bowen. The Fracture Toughness and Fatigue Properties of Micro Sized High Strength γ-TiAl, Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003), pp. OS06W0425-6, 2003.
• S. Sakai, K. Takashima, Y. Higo. Subtle Non-Newtonian Property Measurement of Micro Fluids Using Squeeze Flow Rheometry, Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003), pp. OS06W0415-6pages, 2003.
• K. Takashima, Y. Higo. Fracture and Fatigue of Micro-Sized Specimens for MEMS/MST Applications, Proceedings of ATEM03 (International Conference on Advanced Technology in Experimental Mechanics 2003), pp. OS06W0421-6, 2003.
• 山本宣人　石山千恵美　肥後矢吉. ポリメタクリル酸メチル（ＰＭＭＡ）の塑性変形挙動に及ぼす膜厚と湿度の影響, 高分子学会, Vol. 52, No. 6, pp. 1775-1776, 2003.
• K. Takashima, Y. Higo. Fracture and Fatigue in the Micrometer Scale, Proc. Int. Workshop on Materials Issues for MEMS/MST Devices, pp. 37-43, 2003.
• T. Inamura, K. Takashima, Y. Higo. Crystallography of Nanometre-Sized α’-Martensite Formed at Intersections of Mechanical g-Twins in an Austenitic Stainless Steel, Phil. Mag., Vol. 83, No. 8, pp. 935-954, 2003.
• 高島和希, 肥後矢吉. マイクロ試験片による材料評価法, 日本鉄鋼協会第２回「降伏強度と組織」研究会, 2003.
• 高島和希, 肥後矢吉. マイクロ試験片による鉄鋼材料構成微視組織の機械的性質評価法の開発, 日本鉄鋼協会第２回「降伏強度と組織」研究会, 2003.
• 小山　聡, 高島和希, 肥後矢吉. マイクロサイズ試験片における破壊靭性評価, 日本金属学会2003年秋期（第133回）大会講演概要, pp. 502, 2003.
• 高島和希, D. Rudinal, 小山　聡, 肥後矢吉, T. P. Halford, P. Bowen. マイクロサイズTiAl基金属間化合物の破壊試験とその材料開発への応用, 日本金属学会2003年秋期（第133回）大会講演概要, pp. 231, 2003.
• 高島和希, 肥後矢吉. MEMSデバイス用マイクロスマートマテリアルの破壊と疲労特性評価, 日本金属学会2003年秋期（第133回）大会講演概要, pp. 68, 2003.
• 高島和希, 肥後矢吉. MEMSデバイス用スマートマテリアルの破壊と疲労特性評価, 日本金属学会宿題テーマ研究会「スマートマテリアル」, 2003.
• 高島和希, 小山　聡, 肥後矢吉, T. P. Halford, P. Bowen. マイクロサイズ試験片を用いたTiAl基金属間化合物の破壊試験, 日本金属学会2003年春期（第132回）大会講演概要, pp. 267, 2003.
• Takuya Kamikawa, Ryuichi Tarumi, Kazuki Takashima, Yakichi Higo . Orientation control of nanocrystals in an amorphous alloy by ion beam irradiation, Transactions of the Materials Research Society of Japan, Vol. 28, No. 3, pp. 747-750, 2003.
• 山本宣人　石山千恵美　肥後矢吉. ポリメタクリル酸メチル（ＰＭＭＡ）の引張特性に及ぼす膜厚と湿度の影響, 高分子学会, Vol. 52, No. 9, pp. 1773-1774, 2003.
• C.Ishiyama, Y.Higo. Effects of humidity on Young's modulus in poly(methyl methacrylate), Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, No. (5), pp. 460-465, June 2002.
• T. Inamura, K. Takashima, Y. Higo. Morphology and Crystallography of Nano-Sized a-Martensite in an Austenitic Stainless Steel, Abstract for Int. Conf. on Martensitic Transformation, pp. 157, 2002.
• R. Tarumi, K. Takashima, Y. Higo. Formation of Oriented Nanocrystallllls in an Amorphous alloy by Focused-Ion-Beam Irradiation, Applied Physics Letters, Vol. 81, No. 24, pp. 4610-4612, 2002.
• Y. Higo, K. Takashima. Fracture and Fatigue of Microelements for Micro/Medical Applications, Proceeding of 2002 Annual Meeting of JSME/MMD, pp. 26, 2002.
• Y. Higo, T. Inamura, M. Shimojo, K. Takashima. A New Fatigue Life Extension Method Using Nano-Sized Martensites in Austenitic Stainless Steels, Abstract for 2002 TMS Fall Meeting, pp. 136, 2002.
• 肥後矢吉, 高島和希. マイクロ/ナノテクノロジーを支える評価、計測技術, 機械と工具, Vol. 46, No. 2, pp. 56-60, 2002.
• 肥後矢吉. ミクロへの挑戦－微細材料試験の開発－, 日本機械学会誌, Vol. 105, No. 9, pp. 602-603, 2002.
• H. Ogi, G. Shimoike, M. Hirao, K. Takashima, Y. Higo. Anisotropic Elastic-Stiffness Coefficients of an Amorphous Ni-P Film, J. Appl. Phys., Vol. 91, No. 8, pp. 4857-4862, 2002.
• YAKICHI HIGO. Effects of Humidity on Environmental Stress Cracking Behavior in Poly(methyl methacrylate), C. Ishiyama, T. Sakuma, M. Shimojo and Y. Higo, , J. Polym. Sci. Part B: Polym. Phys., Vol. 40, No. 1, pp. 1-9, 2002.
• 高島和希, 肥後矢吉. MEMS/NEMS材料における破壊と疲労特性評価, まてりあ, Vol. 41, No. 10, pp. 673-676, 2002.
• K. Takashima, S. Koyama, K. Nakai, Y. Higo. Development of Fatigue Pre-Cracking Method into Micro-Sized Specimens for Measuring Fracture Toughness , 2002 MRS Fall Meeting, Vol. J3, pp. 3, 2002.
• K. Takashima, Y. Higo. A New Evaluation Method of Fracture Toughness for Micro-Sized Specimens, Abstract for 2002 TMS Fall Meeting, pp. 105, 2002.
• K. Nakai, S. Koyama, K. Takashima, Y. Higo. Evaluation of Acoustic Emission During Fracture Toughness Test of Micro-Sized Specimens, Proc. 6th Far-East Conf. on Nondestructive Testing, pp. 481-486, 2002.
• K. Takashima, Y. Higo. Results of Round Robin tests for Ni Specimens, , Proc. 2nd Workshop on Standardization for Micromachine/MST/MEMS, pp. 75-79, 2002.
• K. Takashima, Y. Higo. Tensile Testing of Thin Films for Micromachine Applications Using Micro-Gluing Grip Technique, , Proc. 2nd Workshop on Standardization for Micromachine/MST/MEMS, pp. 42-51, 2002.
• K. Takashima, Y. Higo. A New Evaluation Method of Fracture Toughness for Micro-Sized Specimens, Abstract for 2002 TMS Fall Meeting, pp. 105, 2002.
• K. Takashima, R. Tarumi, Y. Higo. Fracture Behavior of Micro-Sized Specimens Prepared from an Amorphous Alloy Thin Film at Ambient and Elevated Temperatures , MRS Symp. Proc., Vol. 695, pp. 355-360, 2002.
• 高島和希, 肥後矢吉. マイクロマテリアルの破壊靭性評価, , 日本機械学会関西支部第77期定時総会講演会講演論文集, pp. 1-31-32, 2002.
• 高島和希, 肥後矢吉. Fe-3%Si合金単結晶における疲労き裂伝播の方位依存性, 日本鉄鋼協会「材料の組織と破壊特性」自主フォーラム成果報告会予稿集, pp. 2-1, 2002.
• 稲邑朋也, 高島和希, 肥後矢吉. オーステナイト鋼中の変形双晶交点におけるナノサイズ・マルテンサイトの形成, 日本金属学会第130回春期大会講演概要, pp. 238, 2002.
• 垂水竜一, 佐藤恵, 高島和希, 肥後矢吉. Ni-P系アモルファス合金の集束イオンビーム照射による方位配向ナノ結晶化, 日本金属学会第130回春期大会講演概要, pp. 231, 2002.
• 中井勝久, 高島和希, 肥後矢吉. 微細結晶粒SUS304ステンレス鋼のマイクロサイズ試験片における曲げ疲労挙動 , 第46回日本学術会議材料連合講演会講演論文集, pp. 331-332, 2002.
• 小山聡, 中井勝久, 高島和希, 肥後矢吉. ミクロンサイズ試験片の破壊靭性試験における疲労予き裂の導入, 第46回日本学術会議材料連合講演会講演論文集, pp. 325-326, 2002.
• Y. Mizutani, Y. Higo, Y. Ichikawa, A. Morita, K. Takashima, M. V. Swain. Corrosion Fatigue Tests of Micro-Sized Specimens, MRS Symp. Proc., Vol. 657, pp. EE5.11.1-11.6, 2001.
• 高島和希, 肥後矢吉, 杉浦眞佐, M. V. Swain. ミクロンサイズの超微小電子・機械部品用材料評価試験装置, トライボロジー, No. 166, pp. 20-22, 2001.
• A. Ogura, R. Tarumi, M. Shimojo, K. Takashima, Y. Higo. Control of Nanocrystalline Orientation Using the Application os a Stress Field in an Amorphous Alloy, Applied Physics Letters, Vol. 79, No. 7, pp. 1042-1044, 2001.
• YAKICHI HIGO. Deformation Mechanisms of a Micro-Sized Austenitic Stainless Steel with Fine Grains, MRS Symp. Proc. , Vol. 657, pp. EE5.10.1-10.6, 2001.
• K. Takashima, A. Ogura, Y. Ichikawa, Y. Higo. Anisotropic Fracture Behavior of Electroless Deposited Ni-P Amorphous Alloy Thin Films, MRS Symp. Proc., Vol. 657, pp. EE5.12.1-12.6, 2001.
• 石山　千恵美, 浅井　琢雄, 小林　正明, 肥後　矢吉. PMMAの疲労き裂伝播挙動に及ぼす応力比の影響, 第11回高分子材料シンポジウム, pp. 30-31, 2001.
• C. Ishiyama, T. Asai, M. Kobayashi, M. Shimojo, Y.Higo. Fatigue crack propagation mechanisms in poly(methyl methacrylate) by in situ observation with a scanning laser microscope, Journal of polymer science part B: polymer physics , Vol. 39, No. 24, pp. 3114-3127, 2001.
• K. Takashima, Y. Higo, S. Sugiura, M. Shimojo. Fatigue Crack Growth Behavior of Micro-Sized Specimens Prepared from an Electroless Plated Ni-P Amorphous Alloy Thin Film, Materials Transactions, Vol. 42, No. 1, pp. 68-73, 2001.
• 高島和希, 肥後矢吉, 杉浦眞佐, M. V. Swain. MEMS用ミクロンサイズ超微小材料に対する疲労および破壊靭性評価試験装置の開発, まてりあ, Vol. 40, No. 2, pp. 184-186, 2001.
• M. Shimojo, T. Inamura, T. H. Myeong, K. Takashima, Y. Higo. Formation of Nano-Sized Martensite Particles in Stainless Steels, Metall. Mater. Trans., A., Vol. 32A, No. 5, pp. 261-265, 2001.
• 水谷有里, 肥後矢吉, 市川祐介, 森田敦, 高島和希. ミクロンサイズ試験片における腐食疲労挙動, 日本金属学会講演概要, Vol. 128, pp. 125, 2001.
• 肥後矢吉. Fatigue Damage of a Micro-Sized Austenitic Stainless Steel with Fine Grains, 日本金属学会講演概要, Vol. 128, pp. 209, 2001.
• 肥後矢吉. 応力場を利用した非晶質金属中へのナノ結晶相析出およびその方位制御, 日本金属学会講演概要, Vol. 128, pp. 448, 2001.
• R. Tarumi, A. Ogura, M. Shimojo, K. Takashima, Y. Higo. Molecular Dynamics Simulation of Nano-Sized Crystallization During Plastic Deformation in an Amorphous Metal, MRS Symp. Proc, Vol. 634, pp. B1.9.1-9.6, 2001.
• A. Ogura, M. Sato, R. Tarumi, M. Shimojo, K. Takashima, Y. Higo. Formation of Nano-Sized Crystals During Plastic Deformation in Amorphous Alloys, MRS Symp. Proc, Vol. 634, pp. B1.10.1-10.6, 2001.
• T. Inamura, M. Shimojo, K. Takashima, Y. Higo. Extension of High Cycle Fatigue Life by the Formation of Nano-Sized Martensite Particles at Intersections of Dislocations in an Austenitic Stainless Steel, MRS Symp. Proc, Vol. 634, pp. B3.13.1-13.6, 2001.
• 佐藤恵, 垂水竜一, 高島和希, 肥後矢吉. アモルファス合金の応力誘起ナノ結晶化とその析出条件, 日本金属学会講演概要, Vol. 129, pp. 272, 2001.
• 垂水竜一, 高島和希, 肥後矢吉. アモルファス合金の応力誘起ナノ結晶化とその構造解析, 日本金属学会講演概要, Vol. 129, pp. 272, 2001.
• 中井勝久, 水谷有里, 高島和希, 肥後矢吉. 微細結晶粒304ステンレス鋼のマイクロサイズ試験片における曲げ疲労過程の引張側と圧縮側の相違, 日本金属学会講演概要, Vol. 129, pp. 509, 2001.
• 肥後矢吉, 高島和希, 中井勝久, 水谷有里, 稲葉秀弘, 杉浦眞佐. ナノインデンテーション用AEセンサーの開発と薄膜評価への応用, 第13回AE総合コンファレンス論文集, pp. 75-78, 2001.
• 中井勝久, 水谷有里, 高島和希, 肥後矢吉. ミクロンサイズ試験片の破壊試験に伴うAE評価, 第13回AE総合コンファレンス論文集, pp. 79-82, 2001.
• 渡辺智, 稲邑朋也, 高島和希, 肥後矢吉. AE法による結晶粒超微細化用ショットピーニング装置の高効率条件の決定, 第13回AE総合コンファレンス論文集, pp. 83-86, 2001.
• YAKICHI HIGO. Anisotropic Fracture Behavior of Ni-P Amorphous Alloy Thin Films, Materials Science for the 21st Century , Vol. B, pp. 221-224, 2001.
• YAKICHI HIGO. Deformation Mechanisms of Micro-Sized Austenitic Stainless Steel Specimens with Fine Grains, Materials Science for the 21st Century , Vol. B, pp. 225-228, 2001.
• Y. Mizutani, Y. Higo, Y. Ichikawa, A. Morita, K. Takashima, M. V. Swain. Corrosion Fatigue Behavior of Micro-Sized Specimens, MRS Symp. Proc. , Vol. B, pp. 241-244, 2001.
• YAKICHI HIGO. Fracture Behavior of an Amorphous Alloy Thin Film, 2001 Mechanics and Materials Summer Conference, pp. 128-129, 2001.
• 菅沼　幹裕, 逆井　基次, 石山　千恵美, 肥後　矢吉. ナノインデンテーションクリープ試験によるPMMAの粘弾性の評価, 日本金属学会講演概要 , Vol. 128, pp. 442, 2001.
• K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fracture Behavior of Micro-Sized Specimens with Fatigue Pre-Crack Prepared from a Ni-P Amorphous Alloy Thin Film, Mechanical Properties of Structural Films, ASTM STP, Vol. 1413, 2001.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, B.Pfister, M.V.Swain. Fatigue testing machine of micro-sized specimens for MEMS applications, Mat. Res. Soc. Symp. Proc., Vol. 605, pp. 241-246, 2000.
• 森田敦, 市川祐介, 下条雅幸, 高島和希, 肥後矢吉, 杉浦眞佐. ミクロンサイズ試験片に対する単軸引張試験装置の開発, 日本金属学会講演概要, Vol. 127, pp. 227, 2000.
• M.Otsubo, M.Shimojo, Y.Higo. Preparation of titanium-inert gas alloys by cyclic plastic deformation, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 88, 2000.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo. Deformation behavior of a fine grained 304 stainless steel using micro-sized specimens, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 50, 2000.
• M.Shimojo, M.Otsubo, Y.Higo. Preparation of a titanium-inert gas alloy and its superconductivity, Abstracts of 13th Int. Symp. on Superconductivity (ISS2000), pp. 99, 2000.
• YAKICHI HIGO. Effects of inert gas species on superconductig properties of titanium-inert gas alloys, Abstracts of 13th Int. Symp. on Superconductivity (ISS2000), pp. 100, 2000.
• G.P.Zhang, K.Takashima, M.Shimojo, Y.Higo. Deformation mechanisms of a micro-sized austenitic stainless steel with fine grains, MRS 2000 fall meeting Abst., pp. 574, 2000.
• K.Takashima, A.Ogura, Y.Ichikawa, M.Shimojo, Y.Higo. Anisotropic fracture behavior of electroless deposited Ni-P amorphous alloy thin films, MRS 2000 fall meeting Abst., pp. 574, 2000.
• T.Inamura, M.Shimojo, K.Takashima, Y.Higo. Extension of high cycle fatigue life by the formation of nano-sized martensite particles at intersections of dislocations in an austenitic stainless steel, MRS 2000 fall meeting Abst., pp. 44, 2000.
• Y.Mizutani, Y.Higo, Y.Ichikawa, A.Morita, K.Takashima. Corrosion fatigue tests of micro-sized specimens, MRS 2000 fall meeting Abst., pp. 574, 2000.
• K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fatigue crack growth of a Ni-P amorphous alloy thin film, Abstracts for Symp. on Mechanical Properties of Structural Films, pp. 12, 2000.
• 高島和希, 肥後矢吉. マイクロマテリアルの破壊と疲労特性, 日本金属学会シンポジウム「微細材料の力学特性と信頼性」, pp. 25-28, 2000.
• 佐藤恵, 小倉暁生, 垂水竜一, 下条雅幸, 高島和希, 肥後矢吉. アモルファス金属の塑性変形に伴う結晶化と熱的安定性の関係, 日本金属学会講演概要, Vol. 127, pp. 187, 2000.
• 水谷有里, 肥後矢吉, 市川祐介, 森田敦, 高島和希. マイクロサイズ試験片に対する腐食疲労試験装置の開発, 日本金属学会講演概要, Vol. 127, pp. 505, 2000.
• 張廣平, 高島和希, 下条雅幸, 肥後矢吉. Deformation behavior of a fine-grained austenitic stainless steel using micro-cantilever beam bending test, 日本金属学会講演概要, Vol. 127, pp. 227, 2000.
• 矢野正勝, 大坪誠, 下条雅幸, 肥後矢吉. Ti-希ガス合金超伝導遷移温度に及ぼす希ガス種の影響, 日本金属学会講演概要, Vol. 127, pp. 369, 2000.
• 大坪誠, 下条雅幸, 肥後矢吉. 繰返し塑性変形を利用して作製したチタン－希ガス合金の超伝導特性, 日本金属学会講演概要, Vol. 127, pp. 368, 2000.
• 下条雅幸, 大坪誠, 肥後矢吉. 繰返し塑性変形を利用したチタン－希ガス合金作製法の開発, 日本金属学会講演概要, Vol. 127, pp. 368, 2000.
• 高島和希, 肥後矢吉, 杉浦眞佐. マイクロマテリアルにおける破壊特性評価, 日本金属学会講演概要, Vol. 127, pp. 73, 2000.
• 石山千恵美, 肥後矢吉. PMMAの疲労き裂先端その場観察によるストライエーション生成機構の解明, 高分子学会予稿集, Vol. 49, No. 8, pp. 2079-2080, 2000.
• 小倉暁生, 市川祐介, 下条雅幸, 高島和希, 肥後矢吉. Ni-P系アモルファス合金薄膜の破壊挙動, 第１回マイクロマテリアルシンポジウム講演論文集, pp. 54-55, 2000.
• G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo. Deformation Behavior of Micro-Sized Austenitic Stainless Steel Specimens, 第１回マイクロマテリアルシンポジウム講演論文集, pp. 52-53, 2000.
• T.Inamura, S.Nagano, M.Shimojo, K.Takashima, Y.Higo. Detection of pre-martensitic transformation phenomena in austenitic stainless steels using an acoustic emission technique, Progress in Acoustic Emission X (Proc.15th Int. AE Sympo.), pp. 299-304, 2000.
• 垂水竜一, 小倉暁生, 下条雅幸, 高島和希, 肥後矢吉. アモルファス金属の塑性変形に伴う結晶化過程の分子動力学シミュレーション, 日本機械学会2000年度年次大会講演論文集, (Ⅱ), pp. 31-32, 2000.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, M.V.Swain. Fracture behaviour of micro-sized specimens prepared from an electroless deposited Ni-P alloy amorphous thin film, Structural Integrity and Fracture Symposium (SIF2000), pp. 243-246, 2000.
• K.Takashima, S.Maekawa, Y.Ichikawa, M.Shimojo, Y.Higo, M.V.Swain. Fracture and fatigue behavior of micro-sized amophous alloy specimens, Proc. Micro Systems; Mechanics and Measurements Symp., pp. 32-35, 2000.
• K.Takashima, S.Maekawa, Y.Ichikawa, M.Shimojo, Y.Higo, S.Sugiura, M.V.Swain. Fatigue life and crack growth properties of micro-sized Ni-P amorphous alloy specimens, Proc. 3rd Int. Conf. Poster Exhibition MicroMaterials (MicroMat 2000), pp. 526-529, 2000.
• A.Ogura, Y.Ichikawa, M.Shimojo, K.Takashima, Y.Higo, M.V.Swain. Fracture toughness measurements of micro-sized Ni-P amorphous alloy specimens, Proc. 3rd Int. Conf. Poster Exhibition MicroMaterials (MicroMat 2000), pp. 574-577, 2000.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, M.V.Swain. New equipment for evaluating performance of microelements on MEMS, Proc. 3rd Int. Conf. Poster Exhibition MicroMaterials (MicroMat 2000), pp. 997-1000, 2000.
• 菅沼幹裕, 逆井基次, 石山千恵美, 肥後矢吉. ナノインデンテーションによるクリープの解析--PMMAへの応用, 日本金属学会講演概要, Vol. 126, pp. 459, 2000.
• 市川祐介, 前川智, 高島和希, 下条雅幸, 肥後矢吉. ミクロンサイズの超微小試験片における破壊靭性評価, 日本金属学会講演概要, Vol. 126, pp. 294, 2000.
• 前川智, 高島和希, 下条雅幸, 肥後矢吉, M.V.Swain. ミクロンサイズのアモルファス合金試験片における疲労き裂伝播挙動, 日本金属学会講演概要, Vol. 126, pp. 293, 2000.
• Y.Higo, K.Takashima, M.Shimojo, C.Ishiyama. Fracture and fatigue properties of micro-sized specimens for bio-medical applications, International Workshop on Bio-integrated Materials & Tissue Engineering, pp. 106, 2000.
• Y.Ichikawa, S.Maekawa, K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fracture behavior of micro-sized Ni-P amorphous alloy specimens, Mat. Res. Soc. Symp. Proc., Vol. 605, pp. 247-252, 2000.
• S.Maekawa, K.Takashima, M.Shimojo, Y.Higo, M.V.Swain. Fatigue properties for micro-sized Ni-P amorphous alloy specimens, Mat. Res. Soc. Symp. Proc., Vol. 605, pp. 273-278, 2000.
• 垂水竜一, 下条雅幸, 高島和希, 肥後矢吉. 分子動力学法によるNi基非晶質金属の塑性変形に伴う結晶化過程の解析, 日本金属学会講演概要, Vol. 127, pp. 190, 2000.
• M.Shimojo, Y.Higo, Y.Oya-Seimiya. Effects of inert gases on fatigue crack growth and their transportation into subsurface regions in titanium, Metall. Mater. Trans. A, Vol. 31A, pp. 1435-1441, 2000.
• Y.Bokoi, C.Ishiyama, M.Shimojo, Y.Shiraishi, Y.Higo. Effects of sorbed water on crack propagation in poly (methyl methacrylate) under static tensile stress, J. Mater. Sci., Vol. 35, No. 19, pp. 5001-5011, 2000.
• YAKICHI HIGO. Fatigue tests of Ni-P amorphous alloy microcantilever beams, Jpn. J. Appl. Phys., Vol. 38, No. 12B, pp. 7194-7198, 1999.
• YAKICHI HIGO. Fracture behavior of micro-sized Ni-P amourphous alloy specimens, Materials Research Society 1999 Fall Meeting Abstracts, pp. 682, 1999.
• Y.Higo, K.Takashima, M.Shimojo, S.Sugiura, B.Pfister, M.V.Swain. Fatigue testing machine of micro-sized specimens for MEMS applications, Materials Research Society 1999 Fall Meeting Abstracts, pp. 680, 1999.
• YAKICHI HIGO. Fatigue properties of micro-sized Ni-P amorphous alloy specimens, Materials Research Society 1999 Fall Meeting Abstracts, pp. 680, 1999.
• 肥後矢吉. 繰返し塑性変形によるチタンへの希ガスの侵入, 日本金属学会講演概要　第125回, pp. 486, 1999.
• 肥後矢吉. Ni-P系アモルファス合金の変形に伴う微細構造変化, 日本金属学会講演概要　第125回, pp. 473, 1999.
• 肥後矢吉. アモルファス金属の繰返し荷重負荷に伴う微細構造変化の分子動力学計算, 日本金属学会講演概要　第125回, pp. 158, 1999.
• 肥後矢吉. ミクロンサイズのアモルファス合金微小試験片の破壊と疲労挙動, 日本金属学会講演概要　第125回, pp. 96, 1999.
• 肥後矢吉. オーステナイトステンレス鋼におけるナノサイズαマルテンサイトによる疲労強化, 日本金属学会講演概要　第125回, pp. 94, 1999.
• 肥後矢吉. AE法による高分子材料の変形と破壊機構の解明 , 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 45-48, 1999.
• 肥後矢吉. AE測定によるNi-P/Al-Mg積層材の損傷過程解析 , 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 99-102, 1999.
• 肥後矢吉. AEによるナノサイズマルテンサイト変態開始温度の決定 , 第12回アコーステイック・エミッション総合コンファレンス論文集, pp. 103-106, 1999.
• 肥後矢吉. 非晶質高分子材料におけるき裂伝播の直接観察とき裂伝播メカニズム , 高分子学会予稿集, Vol. 48, No. 14, pp. 4151-4152, 1999.
• 肥後矢吉. ミクロンサイズのNi-Pアモルファス合金片持ち梁試験片の疲労特性評価 , 日本機械学会平成11年度材料力学部門講演会講演論文集, No. 99-16, pp. 67-68, 1999.
• 肥後矢吉. マイクロマシンを構成する超微小部品の力学的特性評価装置 , 日本機械学会平成11年度材料力学部門講演会講演論文集, No. 99-16, pp. 63-64, 1999.
• YAKICHI HIGO. Micromechanisms of deformation and fracture in crystalline polymers , Proc. 2nd ESIS TC4 Conf. Polymers and Composites, pp. 143, 1999.
• YAKICHI HIGO. A study of a fatigue striation formation mechanism by in-situ observation under a laser microscope during cyclic loading on PMMA , Proc. 2nd ESIS TC4 Conf. Polymers and Composites, pp. 144, 1999.
• YAKICHI HIGO. Effects of humidity on environmental stress crack propagation in polymethyl methacrilate (PMMA), Proc. 2nd ESIS TC4 Conf. Polymers and Composites, pp. 142, 1999.
• 肥後矢吉. ミクロンサイズのアモルファス合金微小試験片に対する疲労試験, 日本機械学会1999年度年次大会講演論文集, Vol. III, pp. 17, 1999.
• 肥後矢吉. Ni-P系アモルファス合金の繰返し荷重負荷に伴う微細構造変化, 日本金属学会講演概要　第124回, pp. 416, 1999.
• 肥後矢吉. ミクロンサイズ試験片用疲労試験機の開発とアモルファス合金微小試験片の疲労試験 , 日本金属学会講演概要　第124回, pp. 92, 1999.
• YAKICHI HIGO. Damage evaluation in a Ni-P/Al-Mg composite by forced resonance and acoustic emission, Proc. 2nd Japan-US symp. on advances in NDT, pp. 74-78, 1999.
• YAKICHI HIGO. Non-destructive inspection of fatigue damage by measuring internal friction , Proc. 2nd Japan-US symp. on advances in NDT, pp. 157-161, 1999.
• YAKICHI HIGO. Fatigue tests of Ni-P amorphous alloy micro-cantilever beams, Proc. 1999 Int. Microprocesses and Nanotechnology Conf., pp. 132-133, 1999.
• YAKICHI HIGO. A new fatigue testing machine for micro-sized specimens , Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 3, pp. 1871-1876, 1999.
• YAKICHI HIGO. The mechanisms of striation formation in poly (methyl methacrylate) (PMMA) , Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 3, pp. 1761-1766, 1999.
• YAKICHI HIGO. Effects of inert gas on fatigue crack growth in titanium , Proc. 7th Int. Fatigue Congr. (Fatigue 99), Vol. 4, pp. 2311-2316, 1999.
• YAKICHI HIGO. Fatigue life extension by nano-sized martensite particles in steels, Proc. 7th Int. Fatigue Congr., Vol. 1, pp. 633-638, 1999.
• YAKICHI HIGO. Fatigue striation formation in an Fe-3%Si alloy -effects of crystallographic orientation and neighbouring grains-, Fatigue and Fracture of Engineering Materials and Structures, Vol. 22, pp. 153-159, 1999.
• YAKICHI HIGO. Relationship between fatigue striation height and stress ratio, Journal of Materials Science, Vol. 34, pp. 2411-2419, 1999.
• Y. Higo, K. Takashima, M. Shimojo, S. Sugiura, B. Pfister, M.V. Swain. Fatigue testing machine of micro-sized specimens for MEMS applications, Materials Research Society 1999 Fall Meeting Abstracts, pp. 680, 1999.
• 肥後矢吉. 21世紀に向けた金属系バイオマテリアル研究への提言, 日本金属学会会報（まてりあ）, Vol. 37, No. 10, pp. 863-864, 1998.
• YAKICHI HIGO. Acoustic Emission Characteristics during Deformation of Polyether Ether Ketone (PEEK), Progress in Acoustic Emission IX (Proc. 14th Int. Acoustic Emission Symp.), Vol. III, pp. 36-43, 1998.
• YAKICHI HIGO. Effects of Humidity on Acoustic Emission Characteristics during Environmental Stress Cracking in Polymethyl Methacrylate (PMMA), Progress in Acoustic Emission IX (Proc. 14th Int. Acoustic Emission Symp.), Vol. III, pp. 99-106, 1998.
• 肥後矢吉. アコースティックエミッション法によるエンジニアリング・プラスティックPEEKの変形過程の解析, 非破壊検査, Vol. 47, No. 12, pp. 903-909, 1998.
• YAKICHI HIGO. Fatigue Crack Propagation in Titanium Single Crystals, Key Engineering Materials, Vol. 145-149, pp. 721-726, 1998.
• YAKICHI HIGO. Mechanism of the two stage plastic deformation following an overload in fatigue crack growth, International Journal of Fatigue, Vol. 20, No. 5, pp. 365, 1998.
• YAKICHI HIGO. Crystallographic orientation dependence of fatigue crack growth in titanium single crystals, J. Japan Institute of Metals., Vol. 62, No. 8, pp. 708, 1998.
• 肥後矢吉. 結晶性高分子材料PEEKの微視変形・破壊機構の解析, 第42回日本学術会議材料研究連合講演会前刷集, pp. 167-168, 1998.
• 肥後矢吉. PMMAの疲労き裂伝播におけるストライエーション生成過程のその場観察, 高分子学会予稿集, Vol. 47, No. 14, pp. 3945-3946, 1998.
• 肥後矢吉. 非晶質高分子材料の歪み硬化指数に及ぼす湿度、歪み速度の影響, 高分子学会予稿集, Vol. 47, No. 14, pp. 3941-3942, 1998.
• 肥後矢吉. 非晶質高分子材料のヤング率に対するひずみ速度と大気中の湿度の影響, 高分子学会予稿集, Vol. 47, No. 14, pp. 3943-3944, 1998.
• 肥後矢吉. ナノサイズ・マルテンサイト粒子分散による耐疲労強化 II. 疲労軟化挙動の変化, 材料とプロセス , Vol. 11, No. 6, pp. 1277, 1998.
• 肥後矢吉. ナノサイズ・マルテンサイト粒子分散による耐疲労強化 I. ナノサイズ・マルテンサイト形成, 材料とプロセス , Vol. 11, No. 6, pp. 1276, 1998.
• 肥後矢吉. 不活性ガス中での疲労き裂伝播速度および破面形態に及ぼすガス中の不純物の影響, 日本金属学会講演概要　第123回, pp. 206, 1998.
• 肥後矢吉. 微細なマルテンサイト粒子で転位を固着する耐疲労強化法における冷間加工の影響, 材料とプロセス , Vol. 11, No. 3, pp. 486, 1998.
• 肥後矢吉. 繰り返し変形中の塑性変形領域への不活性ガスの侵入, 日本金属学会講演概要　第122回, pp. 230, 1998.
• 肥後矢吉. マイクロサイズ試験片用超小型疲労試験機の開発, 日本金属学会講演概要（第123回）, pp. 206, 1998.
• 肥後矢吉. マイクロサイズ試験片用疲労試験装置の開発, 第42回日本学術会議材料連合講演会前刷集, pp. 260-270, 1998.
• 肥後矢吉. 弾性波伝達関数を用いた非破壊検査, 第19回超音波エレクトロニクスの基礎と応用に関するシンポジウム講演予稿集, pp. 15-18, 1998.
• 肥後矢吉. 金属材料の疲労損傷, 日本金属学会講演概要　第123回, pp. 205, 1998.
• YAKICHI HIGO. Effects of Crystallographic Orientation on Fatigue Crack Growth in α-Titanium Single Crystals, Advances in Fracture Research, Vol. 3, pp. 1645-1652, 1997.
• YAKICHI HIGO. A new life extension method for high cycle fatigue using micro-martensitic transformation in an austenitic stainless steel, International Journal of Fatigue, Vol. 19S, No. 1, pp. S69, 1997.
• 肥後矢吉. 生体用金属材料の現状と将来展望, 日本金属学会講演概要（第121回), pp. 118, 1997.
• Y.BOKOI, Y.SHIRAISHI, Y.HIGO. A study of fatigue crack propagation mechanisms of a non-crystalline polymer, Advances in Fracture Research, Vol. 3, pp. 1701-1707, 1997.
• YAKICHI HIGO. Detection of local tensile and shear stress on a non-crystalline polymer using an acoustoelastic stress measurement technique, Proc. Ultrasonics World Congress (WCU97), pp. 332-333, 1997.
• YAKICHI HIGO. Effects of humidity on creep fracture and crazing behaviour of PMMA, Advances in Fracture Research, Vol. 2, pp. 1029-1035, 1997.
• YAKICHI HIGO. The effects of localised stress field near the crack tip on fatigue striation alignment in Fe-3%Si single crystals, Advances in Fracture Research, Vol. 3, pp. 1653-1660, 1997.
• 肥後矢吉. 疲労き裂伝播における不活性ガスの影響, 日本金属学会講演概要　第121回, pp. 432, 1997.
• 浅井琢雄, 肥後矢吉, 野末章. チタン合金の水素誘起割れにおける組織の影響, 第１１回アコースティック・エミッション総合コンファレンス論文集, pp. 57-60, 1997.
• 角田知己, 肥後矢吉, 木内幸則. 弾性波伝達関数法による構造物検査, 非破壊検査／検査と材料評価, Vol. 46, pp. 326-333, 1997.
• 肥後矢吉. 非晶質高分子材料におけるき裂進展挙動の環境湿度依存性, 第１１回アコースティック・エミッション総合コンファレンス論文集, pp. 109-112, 1997.
• 肥後矢吉. 非晶質高分子材料のき裂進展挙動に及ぼす環境湿度及び含有水量の影響, 第41回日本学術会議材料研究会連合講演会前刷集, pp. 119-120, 1997.
• YAKICHI HIGO. Crack Growth Behavior Under Cyclic Loading in a TiAl Based Aluminide with Lamellar Microstructure, Abstracts of Int. Symp. on Designing, Processing and Properties of Advanced Materials, pp. 53, 1997.
• YAKICHI HIGO. A new method of dynamic measurements of the plastic deformation occurring at a fatigue crack tip, International Journal of Fatigue, Vol. 19, No. 3, pp. 237, 1997.
• 肥後矢吉. 非晶質高分子材料の力学的特性に及ぼす水分の影響, 第41回日本学術会議材料研究会連合講演会前刷集, pp. 117-118, 1997.
• YAKICHI HIGO. The Enterring Behavior Of Environmental Gases Into The Plastic Zone Around Fatigue Crack Tips In Titanium, Metallurgical And Materials Transactions a, Vol. 28A, pp. 1341, 1997.
• YAKICHI HIGO. CRACK PROPAGATION BEHAVIOUR UNDER CYCLIC LOADING IN α-TITANIUM SINGLE CRYSTALS, JOURNAL OF THE JAPAN INSTITUTE OF METALS, Vol. 61, No. 1, pp. 41, 1997.
• YAKICHI HIGO. EFFECTS OF DENDRITE CELL SIZE AND PARTICLE DISTRIBUTION ON THE NEAR-THRESHOLD FATIGUE CRACK GROWTH BEHAVIOUR OF CAST AL-SiCp COMPOSITES, Acta Mater, Vol. 44, No. 6, pp. 2249, 1996.
• 肥後矢吉. 異種材料組み合わせ試験片の腐食特性に関する実験的研究, 生体材料, Vol. 13, No. 1, pp. 5, 1995.
• 肥後矢吉. 新生体用Ti-5Al-3Mo-4Zr合金の開発と評価, Orthopaedics, Vol. 8, No. 10, pp. 1, 1995.
• YAKICHI HIGO. Nondestructive evaluation of micromechanism of deformation process during fatigue testing on Polymer by ETFuM (Elastic Wave Transfer Function Method), Nondestructive Characterization of Materials, Vol. (]G0006[), pp. 223, 1994.

著書

• T. Kishi, Y. Higo, M. Ohtsu, S. Yuyama. Progress in Acoustic Emission X, The Japanese Society for Non-Destructive Inspection(JSNDI), The Japanese Society for Non-Destructive Inspection(JSNDI), 2000.
• 肥後矢吉. 金属系バイオマテリアルの基礎と応用, アイ・ピー・シー, アイ・ピー・シー, 2000.
• 肥後矢吉. 半導体・金属材料用語辞典, 工業調査会, 工業調査会, 1999.

国際会議発表 (査読有り)

• Junpei Matsuzaki, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Effects of Chemical Components on the Bending Properties of Micro-sized Cantilevers in SU-8, 38th International Conference on Micro and Nano Engineering, (MNE2012), 38th International Conference on Micro and Nano Engineering, (MNE2012), pp. P067-276, Sept. 2012.
• Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO. Micromechanical characterization of boundary strength in martensitic steel, Materials Science & Technology 2010 (17-21 October, 2010), Materials Science & Technology 2010, Oct. 2010.
• Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO. Characterization of local deformation behavior of martensitic steel using a micro-sized cantilever-beam specimen, 31st Risoe International Symposium on Materials Science (6-10 September 2010), 31st Risoe International Symposium on Materials Science, Sept. 2010.
• Joao Gasper, CHIEMI ISHIYAMA, Masato Sone, YAKICHI HIGO, Oliver Paul. Characterization of the Elastic Properties of SU-8 Microposts and Their Adhesion Strength to Silicon Substrates, Proceedings of MRS fall meeting 2009, Nov. 2009.
• A. Shibata, Y. Ogawa, M. Sone, Y. Higo. Characterization of microstructural evolution during deformation in lath martensite by using micro-sized specimen, 2nd International Symposium on Steel Science (IS3-2009), Oct. 2009.
• Yuichiro Ogawa, Akinobu Shibata, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Characterization of local deformation microstructure in ferrous lathmartensite by using micro-sized specimens, MRS2008 Fall Meeting, Dec. 2008.
• Homuro Noda, Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Characterization of texture and microstructure of electrodeposited Ni layer, MRS2008 Fall Meeting, Dec. 2008.
• Akinobu Shibata, Yoshihide Imamura, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Microstructure of Pd-Ni-P metallic glass film fabricated by electroless alloy plating, MRS2008 Fall Meeting, Dec. 2008.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of Aspect Ratio of Micro-sized Photoresist Patterns on Bond Strength between the Photoresist and Si Substrate, MRS2008 Fall Meeting, Dec. 2008.
• Byung-hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Masahiro Yamagata, Kaoru Masuda, Yakichi Higo. Metallization on polymer via quantitatively controlled catalyzation in Sc-CO₂ and electroless plating with Sc-CO₂ emulsion for micro and nano device, 34th International Micro - Nano Engineering Conference (MNE 2008),15 -18 September 2008, Sept. 2008.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Improvement of Bond strength between Micro-sized photoresist components and silicon substrate usingsupercritical carbon dioxide cleaning, 34th International Micro - Nano Engineering Conference (MNE 2008), 15-18 September 2008, Sept. 2008.
• B.-H.Woo, M.Sone, A.Shibata, K.Masuda, M.Yanagida, C.Ishiyama, Y.Higo. Hybrid Technology of Supercritical Fluid Catalyzation and CO₂ Emulsion Electroless Plating for Metallization on Polymer, The 1st International Symposium on Supercritical Fluid in Fiber and Textile Science 2008 (ISSF2008), June 17-18, 2008,, June 2008.
• Hiroki Uchiyama, Masato Sone, Akinobu Shibata, Yakichi Higo. Uniform Metal-Film Fabricated by Novel Electroless Plating Method with an Emulsion of Supercritical Carbon Dioxide, The 1st International Symposium on Supercritical Fluid in Fiber and Textile Science 2008 (ISSF2008), June 17-18, 2008, June 2008.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of Supercritical Carbon Dioxide on Adhesive Strength between Micro-sized Photoresists and Silicon Substrates, 2007 MRS Fall Meeting, Microelectromechanical Systems--Materials and Devices, MRS symposium Proceedings, Materials Research Society, Vol. 1052, pp. 217-222, Nov. 2007.
• Woo Byung Hoon, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Masahiro Yamagata, Kaoru Masuda, Yakichi Higo. Interface stability between Ni-P film plated by Supercritical Electroless Plating and the Polymer Substrate, 2007 MRS Fall Meeting, Material Research Society, pp. FF8.3, Nov. 2007.
• Yoshihide Imamura, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Yakichi Higo. Fabrication of PdxNiyP100-x-y Metallic Glass film by Electroless Alloy Plating and its catalyst activity, 2007 MRS Fall Meeting, Material Research Society, pp. Z8.9, Nov. 2007.
• Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of Supercritical CO2 on Adhesive Strength between Micro-sized Photoresist pattern and Si Substrate, 2007 MRS Fall Meeting, Material Research Society, pp. DD6.26, Nov. 2007.
• Takafumi Shimada, Akinobu Shibata, Masato Sone, Chiemi Ishiyama, Yakichi Higo. Effect of Crystallographic Structure of Substrate on Texture in Electrodeposited Ni Layers, 2007 MRS Fall Meeting, Material Research Society, pp. FF5.20, Nov. 2007.
• Masahiro SESHIMO, Takayuki HIRAI, Md Mizanur RAHMAN, Masato SONE, Makoto SAKURAI, Yakichi HIGO, Hideo KAMEYAMA. Functionally graded Pd/γ-alumina/alumite composite membrane fabricated by electroless plating with emulsion of supercritical CO2, International Symposium on Innovative Materials for Processes in Energy Systems - for Fuel Cells, Heat Pumps and Related Gas-Solid Technologies -, International Symposium on Innovative Materials for Processes in Energy Systems - for Fuel Cells, Heat Pumps and Related Gas-Solid Technologies -, No. P19, pp. A051, Oct. 2007.
• M.Kondo, C.Ishiyama, M.Sone, YAKICHI HIGO. Size Effects of the Micro-Sized Polycrystalline SUS304 Tensile Specimen Fabricated by Electrolytic Polishing Technique, The 17th Symposium of The Materials Research Society of Japan-Advanced materials researches cut paths to innovation-, The Materials Research Society of Japan, Vol. 32, No. 4, p. 1187-1190, July 2007.
• YAKICHI HIGO. Bonding strength of MEMS materials, Standardization(hosted by Chinese National Committee of the IEC), June 2007.
• Chiemi Ishiyama, Masato Sone, Yakichi Higo. DEVELOPMENT OF NEW EVALUATION METHOD FOR ADHESIVE STRENGTH BETWEEN MICROSIZED PHOTORESIST AND Si SUBSTRATE OF MEMS DEVICES, 10 International Conference on The Mechanical Behavior of Materials, 10 International Conference on The Mechanical Behavior of Materials, Vol. 345/346, pp. 1185-1188, May 2007.
• Chiemi Ishiyama, Masato Sone, Yakichi Higo. DEVELOPMENT OF NEW EVALUATION METHOD FOR ADHESIVE STRENGTH BETWEEN MICROSIZED PHOTORESIST AND Si SUBSTRATE OF MEMS DEVICES, 国際会議ICM10, Key Engineering Materials, Vol. Vols. 345-346 (2007), pp. 1185-1188, May 2007.
• C.Ishiyama, M.Sone, Y.Higo. Effects of Heat Curing on Adhesive Strength between Microsized SU-8 and Si substrate, The 23rd European Mask and Lithography Conference EMLC2007, pp. 37, Jan. 2007.
• T.Yamamoto, C.Ishiyama, M.Sone, YAKICHI HIGO. Recovery of Corrosion Resistance on Sensitized 304 Stainless Steels by Different Directional Rolling, The 17th Symposium of The Materials Research Society of Japan-Advanced materials researches cut paths to innovation, The Materials Research Society of Japan, pp. Q-01-M, Dec. 2006.
• Hiroki Uchiyama, Masato Sone, CHIEMI ISHIYAMA, YAKICHI HIGO. Uniform Ni-P Film by Electroless Plating Method with the Emulsion of Supercritical Carbon Dioxide, 8th International Symposium on Supercritical Fluids, 8th International Symposium on Supercritical Fluids, No. OB-1-15, pp. 76, Nov. 2006.
• C. Ishiyama, J. Hata, S. Koyama, M. Sone, Y. Higo. Development of Evaluation Method for Delamination Strength Between Micro-Sized Materials in MEMS Devices, 2006 MRS Fall Meeting, Materials Research Society, pp. FF4.29, 315p, Nov. 2006.
• Hiroki Uchiyama, Masato Sone, Chiemi Ishiyama, Yakichi Higo. Surface Flatness and Interface Stability of Ni-P Film using New Electroless Plating Method with the Emulsion of Supercritical CO2, 2006 MRS Fall Meeting, Materials Research Society Symposium Proceedings (2007) (Advanced Electronic Packaging), Vol. 968, pp. 187-192, Nov. 2006.
• M.Kubota, C.Ishiyama, M.Sone, Y.Higo. Effect of Applied Stress on the FIB Irradiation-induced Nanocrystalline Morphology in Amorphopus Ni-P, 2006 MRS Fall Meeting, Materials Research Society, pp. in press, Nov. 2006.
• K. Sato, C. Ishiyama, S. Masato, Y. Higo. Effects of P content on morphology of nanocrystals induced by FIB irradiation in Ni-P amorphous alloy, 2006 MRS Fall Meeting, Materials Research Society, pp. N9.8, 198p, Nov. 2006.
• CHIEMI ISHIYAMA, M.Sone, YAKICHI HIGO. Effects of Exposure on Adhesive Strength between Microsized Photoresist and Si Substrate, MNC2006, 19th International Microprocesses and Nanotechnology Conference, pp. in press, Oct. 2006.
• Masaki Kubota, C.Ishiyama, M.Sone, Y.Higo. Effects of a stress field on the crystallographic orientation of nanocrystals formed in a Ni-P amorphous alloy by FIB irradiation, he 5th International Conference on Bulk Metallic Glasses, The 5th International Conference on Bulk Metallic Glasses Abstracts, pp. 95(P109), Oct. 2006.
• Mikito Kondo, Ryo Morihashi, CHIEMI ISHIYAMA, M.Sone, YAKICHI HIGO. Evaluation of the micro-sized BMG specimen fabricated by electrolytic polishing technique, The 5th International Conference on Bulk Metallic Glasses, The 5th International Conference on Bulk Metallic Glasses, October 1-5, Awaji, Japan, pp. 71 (P061), Oct. 2006.
• YAKICHI HIGO. Mechanical Properties Measurement of Microscale Materials for MEMS Application, 9th Workshop and IEEE EDS Mini-colloquia on Nanometer CMOS Technology, pp. 102-113, Oct. 2005.
• CHIEMI ISHIYAMA, Y.Yamamoto, Y.Higo. Effects of Humidity History on the Tensile Deformation Behaviour of Poly(methyl-methacrylate)(PMMA)Films, MRS Spring Meeting 2005, MRS Spring Meeting 2005, Vol. 12.7(CD-ROM), No. 875, pp. 345-350, Mar. 2005.
• T.Kamikawa, R.Tarumi, KAZUKI TAKASHIMA, YAKICHI HIGO. Formation of self-orientated nanocrystals in an amorphous alloy under focused-ion-beam irradiation, Transactions of the Materials Research Society of Japan, Vol. 29, No. (7), pp. 3095-3097, June 2004.
• R.Tarumi, T.Kamikawa, KAZUKI TAKASHIMA, YAKICHI HIGO. Formation of orientated nano-sized crystals in an amorphous alloy under focused ion beam irradiation, Transactions of the Materials Research Society of Japan, Vol. 28, No. (3), pp. 751-754, June 2003.
• T.Inamura, K.Takashima, Y.Higo. Formation of a Pitsch-related bcc. crystal at an intersection of <112>{111} shears in a fcc. crystal, Transactions of the Materials Research Society of Japan, Vol. 28, No. (3), pp. 759-762, June 2003.
• 小山聡, K. Nakai, KAZUKI TAKASHIMA, Y. Higo. Fracture Toughness Tests of Thin Films for MEMS Applications, Trans. Mat. Res. Soc. Japan, Vol. 28, No. 3, pp. 695-698, June 2003.
• T.Kamikawa, R.Tarumi, KAZUKI TAKASHIMA, YAKICHI HIGO. Orientation control of nanocrystals in anamorphous alloy by ion beam irradiation, Transactions of the Materials Research Society of Japan, Vol. 28, No. (3), pp. 747-750, June 2003.
• K. Yamada, S. Watanabe, KAZUKI TAKASHIMA, Y. Higo. Nanocrystallization of Surface Layer in a 316 Austenitic Stainless Steel by Ultrasonic Shot Peening, Trans. Mat. Res. Soc. Japan, Vol. 28, No. 3, pp. 755-758, Jan. 2003.

国内会議発表 (査読有り)

• 肥後矢吉, 曽根正人, 石山千恵美, 柴田曉伸. MEMS用金属ガラスの極微小化による機械的特性評価, 特定領域研究「金属ガラスの材料科学」最終年度（平成19年度）全体報告会, Dec. 2007.
• 肥後矢吉. MEMS用金属ガラスの極微小化による機械的特性評価, 金属ガラス特定領域研究 A04班報告会, Nov. 2007.

国際会議発表 (査読なし・不明)

• Y. Higo. Bending Specimen for Calibrating Materials Testing Machine, Meeting of IEC TC47/WG4, SC47E/WG1, SC47E/WG2 and Workshop on MEMS Standardization, June 2008.
• Y.Higo. Thin Film Durability. Fatigue Test Method, 日韓中MEMS標準化ワークショップ, Japan-Korea-China MEMS Standardization Workshop, pp. N/A, Nov. 2005.
• M.Kubota, T.P. Halford, Y.Higo. Crystallographic orientation control of nanocrystals formed by FIB under a bending strain state, 2005 MRS Fall Meeting, pp. 344, Nov. 2005.
• C.Nakajima, T.P.Halford, Y.Higo. Fine Patterning of Oriented Nickel NanoCrystals using a Focused Ion Beam, 2005 MRS Fall Meeting, 2005 MRS Fall Meeting, pp. 341, Nov. 2005.
• Y.Higo. Mechanical Properties Measurement of Microscale Materials for MEMS Application, 9th IEEE EDS WIMNACT, 9th IEEE EDS WIMNACT, pp. N/A, Oct. 2005.
• Y.Higo. The present and future research systems on MEMS and future challenges of testing integrated systems, FIS Conference on future integrated systems, FIS Conference on future integrated systems, pp. 18, Aug. 2005.
• Y.Higo, T.P.Halford, K.Takashima. Mechanical Properties Measurement of Microscale Materials for MEMS Application, 11th International Conference on Fracture, 11th International Conference on Fracture, Vol. CD-ROM, Mar. 2005.
• Y.Higo, K.Takashima. Mechanical properties of Microscale materials MEMS applications, 2005 TMS Annual Meeting & Exhibition, Vol. CD-ROM, Feb. 2005.
• Y.Higo. Evaluation on the Mechanical Properties of Micro-Meter Scale pecimens for MEMS Components, 2005 IEEE EDS 6th WIMNACT-Taiwan, pp. 74-82, Jan. 2005.

国内会議発表 (査読なし・不明)

• 柴田曉伸, 小川雄一郎, 曽根正人, 肥後矢吉. マイクロサイズ試験片による鉄合金ラスマルテンサイトの変形微細組織発達過程の直接観察, 日本鉄鋼協会秋季講演大会, Sept. 2009.
• 石山千恵美, 柴田曉伸, 曽根正人, 肥後矢吉. 厚膜レジストSU-8 微小円柱パターン－Si 基板間の接合強度に及ぼすアスペクト比の影響, 第５８回高分子討論会, 第５８回高分子討論会予稿集, Vol. 58, No. 2, 1L1-17, Sept. 2009.
• 石山千恵美, 柴田曉伸, 曽根正人, 肥後矢吉. 微小レジスト構造物－基板間の接合強度に及ぼす超臨界二酸化炭素洗浄の影響, 表面技術協会 第119回講演大会, Mar. 2009.
• 柴田曉伸, 今村嘉秀, 石山千恵美, 曽根正人, 肥後矢吉. 無電解めっきにより作製したPd-Ni-P金属ガラス薄膜の微細組織, 日本金属学会秋期講演大会, Sept. 2008.
• 肥後矢吉. MEMS用マイクロマテリアル評価法の国際標準化, 第4回マイクロマテリアルシンポジウム特別講演, Sept. 2008.
• 小川雄一郎, 柴田曉伸, 肥後矢吉. マイクロサイズ試験片を用いた鉄合金ラスマルテンサイトの変形量に伴う組織変化の直接観察, 日本鉄鋼協会秋季講演大会, Sept. 2008.
• 野田炎, 柴田曉伸, 石山千恵美, 曽根正人, 肥後矢吉. ワット浴を用いて作製したNi電気めっき膜の集合組織および微細組織解析, 日本金属学会秋期講演大会, Sept. 2008.
• WOO BYUNG HOON, 曽根 正人, 柴田 曉伸, 石山 千恵美, 肥後 矢吉, Kaoru Masuda, Masahiro Yamagata. "Nucleation and crystal growth of Pd catalyst deposition in supercritical CO₂ for metallization on polymer, 化学工学会第40回秋季大会, Sept. 2008.
• 肥後 矢吉. 疲労問題を新しい計測法と材料から考える（ナノ評価法のマクロ材料評価への展開）, 金属学会関東支部講習会, Aug. 2008.
• 石山 千恵美, 柴田 曉伸, 曽根 正人, 肥後 矢吉. MEMS用微小レジスト構造部材－基板間の接合強度に及ぼす膜厚の影響, 機械学会2008年, Aug. 2008.
• 清水哲也, 曽根正人, 柴田曉伸, 肥後矢吉, 石山千恵美, 田島久善, 宋利国, 曽根田栄悦. 超臨界ナノプレーティング法による半導体配線形成技術の開発, 第55回応用物理学関係連合講演会, Mar. 2008.
• 柴田曉伸, 島田貴文, 石山千恵美, 曽根正人, 肥後矢吉. Ni 電気めっき膜の集合組織形成におよぼす基板の結晶構造の影響, 日本金属学会2008年春期講演大会, Mar. 2008.
• 清水哲也, 曽根正人, 柴田曉伸, 肥後矢吉, 石山千恵美, 田島久善, 宋利国, 曽根田栄悦. 超臨界ナノプレーティング法による半導体配線形成技術の開発, 化学工学会第73年会, Mar. 2008.
• 石山千恵美, 曽根正人, 肥後矢吉. 超臨界二酸化炭素処理を利用した微小レジストパターン-基板間の密着強度の向上, 化学工学会第73年会, Mar. 2008.
• Byung Hoon Woo, Masato Sone, Akinobu Shibata, CHIEMI ISHIYAMA, YAKICHI HIGO. Ni-P Plating on Polymer Substrate using Supercritical Carbon Dioxide, 日本金属学会2007年度秋期大会, 日本金属学会2007年度秋期大会, pp. in press, Sept. 2007.
• Byung Hoon Woo, Masato Sone, Akinobu Shibata, CHIEMI ISHIYAMA, 増田 薫, 山形 昌弘, YAKICHI HIGO. Ni-P Film deposited by Supercritical Nano Electroless Plating with Supercritical Fluid Immersion Catalyzation on Polyimide Substrate, 化学工学会 第39回秋季大会, 化学工学会第39回秋季大会, pp. P221, Sept. 2007.
• 今村 嘉秀, 曽根 正人, 柴田 曉伸, 石山 千恵美, 肥後 矢吉. 無電解合金めっき法による金属ガラス薄膜の作製とその触媒活性, 日本金属学会2007年度秋期大会, 日本金属学会2007年度秋期大会, Sept. 2007.
• 柴田 曉伸, 島田 貴文, 石山 千恵美, 曽根 正人, 肥後 矢吉. Ni電気めっき膜の核生成におよぼす基板の影響, 日本金属学会2007年度秋期大会, 日本金属学会2007年度秋期大会, pp. in press, Sept. 2007.
• 島田 貴文, 柴田 曉伸, 石山 千恵美, 曽根 正人, 肥後 矢吉. Ni電気めっき膜の成長挙動におよぼす基板の影響, 日本金属学会2007年度秋期大会, 日本金属学会2007年度秋期大会, Sept. 2007.
• 小山聡, 石山千恵美, 曽根正人, 肥後矢吉. マイクロ試験片中の応力集中部が疲労特性へ及ぼす影響, 機械学会創立110周年記念 2007年度年次大会 <S08 微小機械設計・開発のための実験力学の新展開>, 機械学会創立110周年記念 2007年度年次大会, Vol. S08, pp. 2840, Sept. 2007.
• 石山千恵美, 曽根正人, 肥後矢吉. MEMS 用微小構造部材－基板間の密着強度に及ぼすプロセス条件の影響, 機械学会創立110周年記念 2007年度年次大会 <S08 微小機械設計・開発のための実験力学の新展開>, 機械学会創立110周年記念 2007年度年次大会, Vol. S08, pp. 2833, Sept. 2007.
• 曽根 正人, 今村 嘉秀, 柴田曉伸, 石山 千恵美, 肥後 矢吉. 無電界合金めっき法による、金属ガラス薄膜の作成とその剥離強度試験法の開発, 科研費特定領域「金属ガラスの科学」A04 班研究会, 科研費特定領域「金属ガラスの科学」A04 班研究会, pp. 09, June 2007.
• 石山 千恵美, 曽根 正人, 肥後 矢吉. MEMS用微小構造部材の接着強度測定法の開発と評価, 第50回日本学術会議 材料工学連合講演会, 第50回日本学術会議 材料工学連合講演会 講演論文集, pp. 103, Dec. 2006.
• 近藤 幹人, 石山 千恵美, 曽根 正人, 肥後 矢吉. 電解研磨により作製したＳＵＳ304微小引張試験片の機械的性質, 第50回日本学術会議 材料工学連合講演会, 第50回日本学術会議 材料工学連合講演会 講演論文集, pp. 105, Dec. 2006.
• 内山浩幹, 曽根 正人, 石山千恵美, 肥後矢吉. 超臨界CO2エマルジョンを用いた無電解Ni-Pめっき法の開発, 38回化学工学会秋季大会, 38回化学工学会秋季大会, Vol. U209, Sept. 2006.
• 石山 千恵美, 松崎 純平, 曽根 正人, 肥後 矢吉. MEMS用フォトレジストのマイクロサイズ曲げ特性に及ぼす露光量の影響, 第55回高分子討論会, 第55回高分子討論会予稿集, pp. 1H14, Sept. 2006.
• 久保田真樹, 石山千恵美, 曽根正人, 肥後矢吉. 応力負荷によるFIB照射下でNi-Pアモルファス合金中に析出するNiナノ結晶の方位制御, 文部科学省科学研究費・特定領域研究「金属ガラスの材料科学」A04班主催 A01班A03班共催「金属ガラスの変形・破壊のメカニクス」, 文部科学省科学研究費・特定領域研究「金属ガラスの材料科学」A04班主催 A01班A03班共催「金属ガラスの変形・破壊のメカニクス」, pp. P05, June 2006.
• 中島千晶, 黒澤浩一, 石山千恵美, 肥後矢吉. 集束ｲｵﾝﾋﾞｰﾑ照射による方位配行ﾆｯｹﾙﾅﾉ結晶相の微細ﾊﾟﾀｰﾆﾝｸﾞ, 日本金属学会2005年秋期大会, 日本金属学会2005年秋期（137回）大会講演概要, pp. 262, Sept. 2005.
• T.P.Halford, Y.Higo, K.Takashima. The Fatigue and Fracture of Microsized TiAl, JIM Fall Meeting 2005 Hiroshima, JIM Fall Meeting 2005 Hiroshima, pp. N/A, Sept. 2005.
• 久保田真樹, T.P.Halford, 石山千恵美, 肥後矢吉. FIB照射によりNi-Pｱﾓﾙﾌｧｽ合金中に析出するNiﾅﾉ結晶の結晶方位に及ぼす負荷応力の影響, 日本金属学会2005年秋期大会, 日本金属学会2005年秋期(137回）大会概要, pp. 261, Sept. 2005.
• 山本武史, 石山千恵美, 肥後や吉. 超音波ｼｮｯﾄﾋﾟｰﾆﾝｸﾞによるSUS304ｽﾃﾝﾚｽ鋼溶接熱影響部の結晶微細化, 日本金属学会2005年秋期大会, 日本金属学会2005年秋期(137回）大会講演概要, pp. 241, Sept. 2005.
• T.Takashima, T.P.Halford, Y.Higo. Fracture and Fatigue Testing of Micro-sized Materials for MEMS appplications, ASME conference, ASME conference, pp. N/A, 2005.
• Ryuichi Tarumi, T. Kamikawa, KAZUKI TAKASHIMA, Y. Higo. Formation of 3-Dimensionally Oriented Nano-Sized Crystals in an Amorphous Alloy Under Ion Beam Irradiation,, 2002 MRS Fall Meeting, Vol. H8, pp. 2, Jan. 2002.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Crystallization in an amorphous metal during shear deformation --A molecular dynamics study--, Abstract of 2nd Int. Symp. on Designing, Processing and Properties of Adv. Eng. Mater. (ISAEM-2000), pp. 10, Jan. 2000.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation, Jpn. J. Appl. Phys., Vol. 39, No. 6B, pp. L611-L613, Jan. 2000.
• Ryuichi Tarumi, A.Ogura, Masayuki SHIMOJO, KAZUKI TAKASHIMA, Y.Higo. Molecular dynamics simulation of nano-sized crystallization during plastic deformation in an amorphous metal, MRS 2000 fall meeting Abst., pp. 40, Jan. 2000.

その他の論文・著書など

• 肥後矢吉. MEMS用マイクロマテリアル評価法の国際標準化, 材料, Vol. 58, No. 10, pp. 804-807, Oct. 2009.
• 肥後矢吉. 超微細材料を用いた機械的特性評価法とその応用, 日本鉄鋼協会会報ふぇらむ, Vol.14, No.9, pp.594-599, 2009, Vol. 14, No. 9, pp. 594-599, Sept. 2009.

特許など

• 石山千恵美, 曽根　正人, 肥後矢吉. 無機・高分子構造体、微小および超微小電気機械システム、製造方法、および製造装置. 特許. 公開. 国立大学法人東京工業大学. 2007/09/06. 特願2007-230872. 2009/03/26. 特開2009-061650. 2009.
• 曽根　正人, 肥後矢吉. 無電解めっき用膜状触媒組成物. 特許. 登録. 国立大学法人東京工業大学. 2007/02/23. 特願2007-043249. 2008/09/11. 特開2008-208387. 特許第4992085号. 2012/05/18 2012.

学位論文

• オーステナイトステンレス鋼単結晶のマルテンサイト変態と塑性変形,  本文,  工学博士,  東京工業大学,  1974/03/26,   

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]